O MAS NMR study of the oxygen local environments in the anionic conductors Y2(B1−xB′x)2O7(B, B′=Sn, Ti, Zr)

The local environments for oxygen in yttrium-containing pyrochlores and fluorites, Y₂(B_1−xB′_x)₂O₇ (B=Ti, B′=Sn, Zr) are investigated by using solid state ¹⁷O MAS NMR spectroscopy. The quadrupolar coupling constants of the nucleus, ¹⁷O are sufficiently small for these ionic oxides, that high-resolution spectra are obtained from the MAS spectra. Different oxygen NMR resonances are observed due to local environments with differing numbers of metal cations (Y³⁺, Sn⁴⁺, Ti⁴⁺ and Zr⁴⁺), allowing the numbers of different local environments to be quantified and cation mixing to be investigated. Evidence for pyrochlore-like local ordering is detected for Y₂Zr₂O₇, which nominally adopts the fluorite structure.     

Structural and magnetic properties of pyrochlore solid solutions (Y,Lu)2Ti2−x(Nb,Ta)xO7±y

The synthesis and characterization of the pyrochlore solid solutions, Y₂Ti_2−xNb_xO_7−y, Lu₂Ti_2−xNb_xO_7−y, Y₂Ti_2−xTa_xO_7−y and Lu₂TiTaO_7−y (−0.4<y<0.5), is described. Synthesis at 1600 °C, and 10⁻⁵ Torr yields oxygen deficiency in all systems. All compounds are found to be paramagnetic and semiconducting, with the size of the local moments being less, in some cases substantially less, than the expected value for the number of nominally unpaired electrons present. Thermogravimetric analysis (TGA) shows that all compounds can be fully oxidized while retaining the pyrochlore structure, yielding oxygen rich pyrochlores as white powders. Powder neutron diffraction of Y₂TiNbO₇-based samples was done. Refinement of the data for oxygen deficient Y₂TiNbO_6.76 indicates the presence of a distribution of oxygen over the 8b and 48f sites. Refinement of the data for oxygen rich Y₂TiNbO_7.5 shows these sites to be completely filled, with an additional half filling of the 8a site. The magnetic and TGA data strongly suggest a preference for a Ti³⁺/(Nb,Ta)⁵⁺ combination, as opposed to Ti⁴⁺/(Nb,Ta)⁴⁺, in this pyrochlore family. In addition, the evidence clearly points to Ti³⁺ as the source of the localized moments, with no evidence for localized Nb⁴⁺ moments.     

Order-disorder transition in the Nd2−yYyZr2O7 system: Probed by X-ray diffraction and Raman spectroscopy

A series of compositions having the general formula Nd_2−yY_yZr₂O₇ have been synthesized by heating of mixtures of oxides of the components cation and characterized by X-ray diffraction and Raman spectroscopy. Rietveld analysis on the XRD data of all the compositions has been performed which revealed a decrease in lattice parameter as a function of y in the series Nd_2−yY_yZr₂O₇ (y=0.0-0.8). Subsequently, a biphasic region starts which continues for y=1.2 and 1.6. The other end member, i.e. Y₂Zr₂O₇ is found to be defect fluorite. On the other hand, Nd³⁺ has been used as surrogate material for Am³⁺, which is a minor actinide found in spent nuclear fuel. In the pyrochlore range, the increasing trend of the x-parameter of 48f oxygen indicates the enhancement of disorder in the system. Raman spectroscopy has been employed to validate the data obtained from XRD. The involvement of 48f oxygen in disorder has also been verified by Raman spectroscopic investigation.     

Mixed conductivity, structural and microstructural characterization of titania-doped yttria tetragonal zirconia polycrystalline/titania-doped yttria stabilized zirconia composite anode matrices

Taking advantage of the fact that TiO₂ additions to 8YSZ cause not only the formation of a titania-doped YSZ solid solution but also a titania-doped YTZP solid solution, composite materials based on both solutions were prepared by solid state reaction. In particular, additions of 15 mol% of TiO₂ give rise to composite materials constituted by 0.51 mol fraction titania-doped yttria tetragonal zirconia polycrystalline and 0.49 mol fraction titania-doped yttria stabilized zirconia (0.51TiYTZP/0.49TiYSZ). Furthermore, Y₂(Ti_1−yZr_y)₂O₇ pyrochlore is present as an impurity phase with y close to 1, according to FT-Raman results. Lower and higher additions of titania than that of 15 mol%, i.e., x=0, 5, 10, 20, 25 and 30 mol% were considered to study the evolution of 8YSZ phase as a function of the TiO₂ content. Furthermore, zirconium titanate phase (ZrTiO₄) is detected when the titania content is equal or higher than 20 mol% and this phase admits Y₂O₃ in solid solution according to FE-SEM-EDX.The 0.51TiYTZP/0.49TiYSZ duplex material was selected in this study to establish the mechanism of its electronic conduction under low oxygen partial pressures. In the pO₂ range from 0.21 to 10^−7.5 atm. the conductivity is predominantly ionic and constant over the range and its value is 0.01 S/cm. The ionic plus electronic conductivity is 0.02 S/cm at 1000 °C and 10^−12.3 atm. Furthermore, the onset of electronic conductivity under reducing conditions exhibits a −1/4 pO₂ dependence. Therefore, it is concluded that the n-type electronic conduction in the duplex material can be due to a small polaron-hopping between Ti³⁺ and Ti⁴⁺.     

Ionic conductivity, structural and thermal properties of pure and Sr doped Y2Ti2O7 pyrochlores for SOFC

In the present study, SrO doped Yttrium titanate pyrochlore was synthesized using solid state reaction technique. The sintering characteristics, crystal structure, thermal and conductivity behavior of doped and undoped pyrochlores have been studied to find their suitability in solid oxide fuel cells (SOFC). The as-prepared samples were characterized using X-ray diffraction (XRD), Fourier-Transform-Infrared spectroscopy (FT-IR), thermal-gravimetric analysis (TGA) and ac conductivity up to 900 °C. The results are discussed in light of oxygen vacancy formation and structural disordering. Undoped and doped yttrium titanate with SrO (x = 0.1) exhibits single Y₂Ti₂O₇ phase with relative density of 94%. It was observed that further doping of SrO (x = 0.2–0.4) leads to formation of Y₂Ti₂O₇ phase along with SrTiO₃ phase. Excessive SrO (x = 0.4) results in increase in ionic conductivity to 1.50 × 10⁻¹ S cm⁻¹ whereas it impedes the densification process with relative density of 85%.     

Room-temperature synthesis and conductivity of the pyrochlore type Dy2(Ti1−yZry)2O7 (0?y?1) solid solution

Different compositions in a solid solution of general formula Dy₂(Ti_1−yZr_y)₂O₇, showing high oxygen ion conductivity, have been successfully prepared at room temperature via mechanochemical synthesis. Stoichiometric mixtures of the constituent oxides were dry milled together in a planetary ball mill by using zirconia vials and balls. Chemical changes in the powder mixtures as a function of composition and milling time were followed by X-ray diffraction and revealed that, in all cases and after milling for 19 h, the powder mixtures consisted of a single phase. Electrical properties were measured on sintered pellets as a function of frequency, temperature and zirconium content, revealing an increase in conductivity of more than one order of magnitude for y?0.4, which, as observed in the similar Y₂(Ti_1−yZr_y)₂O₇, has been related with the onset of disordering of the anion sublattice. Despite increasing structural disorder with increasing Zr content, conductivity remains almost constant for y>0.6, reaching a maximum value of ∼5×10⁻³ for Dy₂Zr₂O₇ at 900 °C.     

Lanthanum pyrochlores and the effect of yttrium addition in the systems La2−xYxZr2O7 and La2−xYxHf2O7

The crystal structures of the compounds La_2−xY_xZr₂O₇ and La_2−xY_xHf₂O₇ with x=0.0, 0.4, 0.8, 1.2, 1.6, and 2.0 have been studied using neutron powder diffraction and electron microscopy to determine the stability fields of the pyrochlore and fluorite solid solutions. The limits of pyrochlore stability in these solid solutions are found to be close to La_0.8Y_1.2Zr₂O₇ and La_0.4Y_1.6Hf₂O₇, respectively. In both systems the unit cell parameter is found to vary linearly with Y content across those compositions where the pyrochlore phase is stable, as does the x-coordinate of the oxygen atoms on the 48f (x,,) sites. In both systems, linear extrapolations of the pyrochlore data suggest that the disordering is accompanied by a small decrease in the lattice parameter of approximately 0.4%. After the pyrochlore solid solution limit is reached, a sharp change is observed from x∼0.41 to 0.375 as the disordered defect fluorite structure is favoured. Electron diffraction patterns illustrate that some short-range order remains in the disordered defect fluorite phases.     

Thermal properties of the pyrochlore, Y2Ti2O7

The thermal conductivity and heat capacity of high-purity single crystals of yttrium titanate, Y₂Ti₂O_7, have been determined over the temperature range 2 K?T?300 K. The experimental heat capacity is in very good agreement with an analysis based on three acoustic modes per unit cell (with the Debye characteristic temperature, θ_D, of ca. 970 K) and an assignment of the remaining 63 optic modes, as well as a correction for C_p−C_v. From the integrated heat capacity data, the enthalpy and entropy relative to absolute zero, are, respectively, H(T=298.15 K)−H₀=34.69 kJ mol⁻¹ and S(T=298.15 K)−S₀=211.2 J K⁻¹ mol⁻¹. The thermal conductivity shows a peak at ca. θ_D/50, characteristic of a highly purified crystal in which the phonon mean free path is about 10 μm in the defect/boundary low-temperature limit. The room-temperature thermal conductivity of Y₂Ti₂O₇ is 2.8 W m⁻¹ K⁻¹, close to the calculated theoretical thermal conductivity, κ_min, for fully coupled phonons at high temperatures.     

Order-disorder transition in Nd2−yGdyZr2O7 pyrochlore solid solution: An X-ray diffraction and Raman spectroscopic study

Powder X-ray diffraction (XRD) and Raman spectroscopic study of order-disorder-phase transition with increase in the content of Gd in Nd_2−yGd_yZr₂O₇ solid solution is being reported. It has been observed from Rietveld analysis that with increase in concentration of Gd in Nd_2−yGd_yZr₂O₇, the value of the x parameter of the 48f oxygen changes from 0.332(1) to 0.343(1) with a sudden change in the slope for y=1.8, which indicates that the structure is transforming from ordered pyrochlore to disordered pyrochlore. In addition to that a sudden and drastic change in the Raman spectra including changes in the position and width of several Raman modes beyond y?1.8 has also been observed which has been correlated with increasing disorder. Based on these studies, it is suggested that there is a discontinuous order-disorder transition from ‘perfect pyrochlore’ to ‘defect pyrochlore’ phase in Nd_2−yGd_yZr₂O₇ solid solution.     

Visible and infrared luminescence properties of Er-doped Y2Ti2O7 nanocrystals

Er³⁺-doped Y₂Ti₂O₇ nanocrystals were fabricated by the sol-gel method. While the annealing temperature exceeds 757 °C, amorphous pyrochlore phase Er_xY_2−xTi₂O₇ transfers to well-crystallized nanocrystals, and the average crystal size increases from ∼70 to ∼180 nm under 800-1000 °C/1 h annealing. Er_xY_2−xTi₂O₇ nanocrystals absorbing 980 nm photons can produce the upconversion (526, 547, and 660 nm; ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2, and ⁴F_9/2→⁴I_15/2, respectively) and Stokes (1528 nm; ⁴I_13/2→⁴I_15/2) photoluminescence (PL). The infrared PL decay curve is single-exponential for Er³⁺ (5 mol%)-doped Y₂Ti₂O₇ nanocrystals but slightly nonexponential for Er³⁺ (10 mol%)-doped Y₂Ti₂O₇ nanocrystals. For 5 and 10 mol% doping concentrations, the mechanism of up-converted green light is the two-photon excited-state absorption. Much stronger intensity of red light relative to green light was observed for the sample with 10 mol% dopant. This phenomenon can be attributed to the reduced distance between Er³⁺-Er³⁺ ions, resulting in the enhancement of the energy-transfer upconversion and cross-relaxation mechanisms.     

The fluorite-pyrochlore transformation of Ho2−yNdyZr2O7

Twelve members of the Ho_2−yNd_yZr₂O₇ series, prepared using conventional solid state methods, have been characterised by neutron powder diffraction. Ho₂Zr₂O₇ has a defect fluorite structure whereas Nd₂Zr₂O₇ is found to adopt the ordered pyrochlore structure with the composition induced fluorite-pyrochlore transformation occurring near y=1. Rietveld analysis on the neutron data for all the compositions reveals an increase in lattice parameter as a function of y across the entire series, with a small discontinuity associated with the transformation. The neutron profile results suggest that domains of pyrochlore-type initially begin to form before crystallising into a separate phase, and therefore that anion and cation ordering processes are distinct. There is a strong correlation between the extent of disorder in the anion sublattice and the x-parameter of 48f oxygen. These results point the way to a better understanding of the stability observed in pyrochlore structures.     

Crystal structure and electrical conductivity of lanthanum-calcium chromites-titanates La1−xCaxCr1−yTiyO3−δ (x=0-1, y=0-1)

Five series of perovskite-type compounds in the system La_1−xCa_xCr_1−yTi_yO₃ with the nominal compositions y=0, x=0-0.5; y=0.2, x=0.2-0.8; y=0.5, x=0.5-1.0; y=0.8, x=0.6-1.0 and y=1, x=0.8-1 were synthesized by a ceramic technique in air (final heating 1350 °C). On the basis of the X-ray analysis of the samples with (Ca/Ti)?1, the phase diagram of the CaTiO₃-LaCr^IIIO₃-CaCr^IVO₃ quasi-ternary system was constructed. Extended solid solution with a wide homogeneity range is formed in the quasi-ternary system CaCr^IVO₃-CaTiO₃-LaCr^IIIO₃. The solid solution La_{(1−x′−y)}Ca_(x′+y)Cr^IV_x′Cr^III_{(1−x′−y)}Ti_yO₃ exists by up to 0.6-0.7 mol fractions of CaCr^IVO₃ (x^′<0.6-0.7) at the experimental conditions. The crystal structure of the compounds is orthorhombic in the space group Pbnm at room temperature. The lattice parameters and the average interatomic distances of the samples within the solid solution ranges decrease uniformly with increasing Ca content. Outside the quasi-ternary system, the nominal compositions La_0.1Ca_0.9TiO₃, La_0.2Ca_0.8TiO₃, La_0.4Ca_0.6Cr_0.2Ti_0.8O₃ and La_0.3Ca_0.7Cr_0.2Ti_0.8O₃ in the system La_1−xCa_xCr_1−yTi_yO₃ were found as single phases with an orthorhombic structure. In the temperature range between 850 and 1000 °C, the synthesized single-phase compositions are stable at pO₂=6×10⁻¹⁶-0.21×10⁵ Pa. Oxygen stoichiometry and electrical conductivity of the separate compounds were investigated as functions of temperature and oxygen partial pressure. The chemical stability of these oxides with respect to oxygen release during thermal dissociation decreases with increasing Ca-content. At 900 °C and oxygen partial pressure 1×10⁻¹⁵-0.21×10⁵ Pa, the compounds with x>y (acceptor doped) are p-type semiconductors and those with x<y (donor doped) and x=y are n-type semiconductors. The type and level of electrical conductivity are functions of the concentration ratios of cations occupying the B-sites of the perovskite structures: [Cr³⁺]/[Cr⁴⁺] and [Ti⁴⁺]/[Ti³⁺]. The maximum electrical conductivity at 900 °C and pO₂=10⁻¹⁵ Pa was found for the composition La_0.1Ca_0.9TiO₃ (near 50 S/cm) and in air at 900 °C for La_0.5Ca_0.5CrO₃ (close to 100 S/cm).     

Effects of firing schedule on solubility limits and transport properties of ZrO2-TiO2-Y2O3 fluorites

The low Y/high Zr edge of the cubic defect fluorite solid solution in the system ZrO₂-TiO₂-Y₂O₃ in air is reassessed, as it is these compositions which have been suggested to offer the highest levels of mixed conductivity. Vegard's law is obeyed for values of x which lie within the cubic defect fluorite phase in Zr_1−x−yY_yTi_xO_2−δ for values of y=0.2 and 0.25. Measured lattice parameters show good agreement with those calculated from the Kim relation. Deviation from Vegard's law places the limit of the solid solution at x=0.18 and 0.20 for values of y=0.2 and 0.25, respectively, at 1500 °C. Discrepancies in current literature data can be shown to be due to differences in firing schedule such as slight temperature fluctuations and/or different cooling rates. A high level of care of sintering temperature and cooling profile is essential to form the most promising single-phase materials which contain maximum Ti-contents with low Y-contents. Contraction of the phase limit as a result of poor synthesis control leads to erroneously high values of bulk ionic conductivity while values of electronic conductivity are shown to be less affected.     

Solid solubilities of (La Nd,)2(Zr,Ti)2O7 phases deduced by neutron diffraction

Time-of-flight powder neutron diffraction has been performed on oxides with composition (La_1−xNd_x)₂Zr₂O₇ and Nd₂(Zr_1−xTi_x)₂O₇, where x=0, 0.2, 0.4,…1.0, in order to determine the solid solution behaviour across each series. Between La₂Zr₂O₇ and Nd₂Zr₂O₇, a cubic pyrochlore phase is observed (, Z=8). A linear decrease in the lattice parameter from 10.8047 to 10.6758 Å indicates complete miscibility of the two end-members. For the same series, the 48f oxygen x-parameter increases from 0.3313 to 0.3348, suggesting increased distortion of the 6 coordinate B sites and reduced distortion of the 8 coordinate A sites. There is limited solubility of Nd₂Ti₂O₇ in Nd₂Zr₂O₇. Exsolution of a monoclinic phase (P2₁, Z=8) rich in Nd₂Ti₂O₇ is observed at approximately x=0.56. The compositional range over which a solid solution exists is more extensive than that which has been previously reported. The solubility of Nd₂Zr₂O₇ in Nd₂Ti₂O₇ is very low.     

Structural manipulation of pyrochlores: Thermal evolution of metastable Gd2(Ti1−yZry)2O7 powders prepared by mechanical milling

The structural and microstructural characteristics of metastable Gd₂(Ti_1−yZr_y)₂O₇ powders prepared by mechanical milling have been studied by a combination of XRD and Raman spectroscopy. Irrespective of their Zr content, as-prepared powder phases present an anion-deficient fluorite-type of structure as opposed to the pyrochlore equilibrium configuration obtained for the same solid solution by other synthetic routes. These fluorites are stable versus thermal activation, at least up to temperatures of 800 °C. For the Ti-rich compositions, thermal treatments at higher temperatures facilitate the rearrangement of the cation and anion substructures and the relaxation of mechanochemically induced defects whereas for compositions with high Zr content, the fluorite crystal structure is retained even at temperatures as high as 1200 °C. Interestingly enough, transient pyrochlores showing a very unusual cation distribution were observed during the thermally induced defect-recovery process.     

Luminescent and structural properties of the series Ba6−xEuxTi2+xTa8−xO30 and Ba4−yKyEu2Ti4−yTa6+yO30

The series Ba_6−xEu_xTi_2+xTa_8−xO₃₀ and Ba_4−yK_yEu₂Ti_4−yTa_6+yO₃₀ have been synthesized at 1400°C in air. They exhibit efficient excitation at about 400 nm and typical emission of Eu³⁺ at about 580-620 nm, form solid solutions within 0.0?x?2.0 and 0?y?4 respectively, and crystallized in P4/mbm at room temperature with Eu atoms occupied at centrosymmetric site (0, 0, 0). Their conductivity is very low (2.8×10⁻⁶ Ω⁻¹ cm⁻¹ at 740°C for Ba₆Ti₂Ta₈O₃₀).     

The pyrochlore to ‘defect fluorite’ transition in the Y2(ZryTi1−y)2O7 system and its underlying crystal chemistry

A careful investigation of the previously reported single phase, pyrochlore structure type Y₂(Zr_yTi_1−y)₂O₇, 0?y?0.9, (YZT) solid solution has been carried out. Given the known slow rate of diffusion of cations in fluorite-related stabilized zirconia systems and the consequent difficulty in achieving equilibrium, careful attention was paid to synthesis procedures while Guinier XRD and electron diffraction were used to investigate the synthesized materials. As a consequence, a subtle but nonetheless clear two-phase region separating a pyrochlore-type solid solution field (from 0?y?∼0.54) from a “defect fluorite” type solid solution field (from ∼0.68?y?1) has been found. The underlying crystal chemistry of the system has been investigated using the bond valence sum approach. The dielectric properties have also been measured as a function of composition. The dielectric constant and dielectric loss of the lowest y compounds are potentially quite useful but deteriorate rapidly with increasing Zr content.     

Correlation of crystal structures with electric field gradients in the fluorite- and pyrochlore-type compounds in the Gd2O3-ZrO2 system

Correlation of crystal structure with electric field gradient (EFG) in the fluorite- and pyrochlore-type compounds in the Gd₂O₃-ZrO₂ system Gd_xZr_1−xO_2−x/2 with 0.18?x?0.62 were investigated by ¹⁵⁵Gd Mössbauer spectroscopy, powder X-ray diffraction and point-charge model (PCM) calculation. An intermediate ordered pyrochlore phase forms for 0.45?x?0.55, sandwiched with a disordered fluorite phase for 0.18?x<0.45 and 0.55<x?0.62. Some ¹⁵⁵Gd Mössbauer parameters, especially the quadrupole coupling constant (e²qQ), were found to exhibit a characteristic maximum around the ideal-pyrochlore Gd₂Zr₂O₇ (x=0.50) composition. The validity of the proposed pyrochlore-based structural model was examined by comparing the experimental values of EFG at the Gd sites with those calculated by the PCM calculations.     

Structural Study of Li1+x−yNb1−x−3yTix+4yO3 Solid Solutions

The structures of Li_1+x−yNb_1−x−3yTi_x+4yO₃ solid solutions within the so-called M-phase field in the Li₂O-Nb₂O₅-TiO₂ system were investigated using high-resolution transmission electron, microscope (HRTEM) and single-crystal X-ray diffraction. The results demonstrated that the phase field is not a solid solution but rather a homologous series of commensurate intergrowth structures with LiNbO₃-type (LN) slabs separated by single [Ti₂O₃]²⁺ corundum-type layers. The thickness of the LN slab decreases with increasing Ti-content from ∼55 to 3 atomic layers in the metastable H-Li₂Ti₃O₇ end-member. The LN slabs accommodate a wide range of Ti⁴⁺/Nb⁵⁺ substitution, and for a given homolog the distribution of Ti and Nb is not uniform across the slab. A single-crystal X-ray diffraction study of a structure composed of nine-layer LN slabs revealed preferential segregation of Ti to the slab surfaces which apparently provides partial compensation for the charge on the adjacent [Ti₂O₃]²⁺ corundum layers. The extra cations in phases with x>0 are accommodated through the formation of Li-rich Li₂MO₃-type layers in the middle of the LN slabs. The fraction of layers with extra cations increases with increasing Ti-content in the structure.     

Study of Ti substitution in ZrW2O8 negative thermal expansion materials

Powder XRD-analysis and thermo-mechanical analysis on sintered TiO₂-WO₃-ZrO₂ mixtures revealed the formation of Zr_1−xTi_xW₂O₈ solid solutions. A noticeable decrease in unit cell parameter ‘a’ and in the order-disorder transition temperature could be seen in the case of Zr_1−xTi_xW₂O₈ solid solutions.Studies performed on other ZrW₂O₈ solid solutions have attributed an increase in phase transition temperature to a decrease in free lattice volume, whereas a decrease in phase transition temperature was suggested to be due to the presence of a more disordered state. Our studies indicate that the phase transition temperature in our materials is strongly influenced by the bond dissociation energy of the substituting ion-oxygen bond. A decrease in bond strength may compensate for the effect of a decrease in lattice free volume, lowering the phase transition temperature as the degree of substitution by Ti⁴⁺ increases. This hypothesis is proved by differential scanning calorimetry.