Electronic structure and half-metallicity in Heusler alloys Fe2YB (Y=Ti, V, Mn, Cr)

The electronic structure and magnetic properties of B-based Heusler alloys Fe₂YB (Y=Ti, V, Cr and Mn) have been studied theoretically. These alloys are all ferrimagnets except for Fe₂VB. The latter has 24 valence electrons and is a paramagnetic semimetal. Fe₂CrB is predicted to be half-metals at equilibrium lattice constant. The spin polarization of Fe₂MnB is also quite high. The calculated total moments are 1.00 μ_B for Fe₂CrB and 2.04 μ_B for Fe₂MnB. In Fe₂CrB and Fe₂MnB, the total moments are mainly determined by the partial moment of Cr or Mn. The Fe moment is relatively small and antiparallel to that of Cr or Mn. Under uniform lattice distortion, the half-metallicity of Fe₂CrB is more stable than Fe₂MnB, which is related to the detailed DOS structure of them near E_F.     

Half-metallic properties of the Co2Ti1−xFexGa Heusler alloys and Co2Ti0.5Fe0.5Ga (0 0 1) surface

Electronic and magnetic properties of the bulk Co₂Ti_1−xFe_xGa Heusler alloys and Co₂Ti_0.5Fe_0.5Ga (0 0 1) surfaces are studied within the framework of density functional theory using the augmented plane wave plus local orbital (APW+lo) approach. It will be shown that all alloys have the spin polarization of the ideal 100% value except the Co₂FeGa alloy with spin polarization about 98%. Co₂Ti_0.5Fe_0.5Ga is an example that is stable against the effects destroying the half-metallicity due to the position of the Fermi energy (E_F) in the middle of the minority band gap. The phase diagram obtained by ab-initio atomistic thermodynamics shows that in the higher limit of μ_Ga three surfaces of FeGa, TiGa and TiFeGa are accessible in the Co₂Ti_0.5Fe_0.5Ga alloy but on decreasing μ_Ga, the accessible region gradually moves towards FeGa termination. It is discussed that, at the ideal surfaces, half-metallicity of the alloy is lost, although the TiGa surface keeps high spin polarization (about 95%).     

Epitaxial growth of bcc-FexCo100-x thin films on MgO(1 1 0) single-crystal substrates

Fe_xCo_100-x (x=100, 65, 50 at%) epitaxial thin films were prepared on MgO(1 1 0) single-crystal substrates heated at 300 °C by ultra-high vacuum molecular beam epitaxy. The film structure and the growth mechanism are discussed. FeCo(2 1 1) films with bcc structure grow epitaxially on MgO(1 1 0) substrates with two types of variants whose orientations are rotated around the film normal by 180° each other for all compositions. Fe_xCo_100-x film growth follows the Volmer Weber mode. X-ray diffraction analysis indicates the out-of-plane and the in-plane lattice spacings are in agreement with the values of respective bulk Fe_xCo_100-x crystals with very small errors less than ±0.4%, suggesting the strains in the films are very small. High-resolution cross-sectional transmission electron microscopy shows that periodical misfit dislocations are preferentially introduced in the film at the Fe₅₀Co₅₀/MgO interface along the MgO[1 1¯ 0] direction. The presence of such periodical dislocations decreases the large lattice mismatch of about −17% existing at the FeCo/MgO interface along the MgO[1 1¯ 0] direction.     

A DFT study of the electronic and magnetic properties of Fe2MnSi1−xGex alloys

We performed density functional theory (DFT) calculations to study the structural, electronic and magnetic properties of Fe₂MnSi_1−xGe_x alloys (x=0, 0.25, 0.50, 0.75, and 1.00). The lattice constant is found to increase linearly as a function of Ge concentration with a decrease in the formation energy. The total magnetic moment is found to be 3 μ_B for all alloys with the most contribution from Mn local magnetic moments. Iron atoms, however, exhibit much smaller spin moments about 10% of the bulk value. It seems that due to the proximity of Fe, magnetic moments have been induced on the sp atoms, which couple antiferromagnetically with Fe and Mn spin moments. Although, the band gap remains almost constant (0.5 eV), the spin–flip gap decreases as a function of x.     

Half-metallic ferrimagnetism in the Ti2CoAl Heusler compound

Density functional calculations performed on the Ti₂CoAl Heusler compound confirm it to be a half-metallic ferrimagnet with the spin-down energy gap of 0.49 eV. The Ti₂CoAl Heusler compound has a magnetic moment of 2 μ_B at the equilibrium lattice constant a=6.14 Å. The Ti₂CoAl Heusler compound is ferrimagnetic and maintains the half-metallic character having 100% polarization for lattice constants ranging between 5.85 and 6.44 Å.     

Effect of low-valent atom substitution on electronic structure and magnetic properties of Fe1.5M0.5CoSi (M=V, Cr, Mn, Fe) Heusler alloys

Quaternary Heusler alloys Fe_1.5M_0.5CoSi with M=V, Cr, Mn and Fe have been investigated theoretically and experimentally. All of these samples crystallize in the ordered Heusler-type structure. The calculated electronic structure shows a pseudogap around E_F in the minority spin states of Fe₂CoSi. With the substitution of low-valent atoms for Fe, the majority antibonding peak is shifted to higher energy and a minority gap around the Fermi level is opened. High spin polarization ratio is obtained in Fe_1.5M_0.5CoSi (M=V, Cr, Mn) alloys. The calculated total spin moments decrease with decreasing number of valence electrons and follow the Slater-Pauling curve, which agree with the experimental results well. The Curie temperature decreases as M atom varies from Fe to V, but is always higher than 650 K, which is suitable for technical applications.     

High spin polarization in ordered Cr3Co with the DO3 structure: A first-principles study

The electronic structure of the highly ordered alloy Cr₃Co with the DO₃ structure has been studied by FLAPW calculations. It is found that the ferrimagnetic state is stable and that the equilibrium lattice constant of Cr₃Co equals 5.77 Å. A large peak in majority spin density of states (DOS) and an energy gap in minority spin DOS are observed at the Fermi level, which results in a high spin polarization of 90% in the ordered alloy Cr₃Co. The total magnetic moment of Cr₃Co is 3.12μ_B, which is close to the ideal value of 3μ_B derived from the Slater-Pauling curve. An antiparallel alignment between the moments on the Cr (A, C) sites and the Cr (B) sites is observed. Finally, the effect of lattice distortion on the electronic structure and on magnetic properties of Cr₃Co compound is studied. A spin polarization higher than 80% can be obtained between 5.55 and 5.90 Å. With increasing lattice constant, the magnetic moments on the (A, C) sites increase and the moments on the (B, D) sites decrease. They compensate each other and make the total magnetic moment change only slightly.     

Electronic structure and magnetism in full-Heusler compound Mn2ZnGe

The first-principle calculations within density functional theory are used to investigate the electronic structure and magnetism of the Mn₂ZnGe Heusler alloy with CuHg₂Ti-type structure. The half-metallic ferrimagnets (HMFs) in Mn₂ZnGe are predicted. The energy gap lies in the minority-spin band for the Mn₂ZnGe alloy. The calculated total spin magnetic moment is −2μ_B per unit cell for Mn₂ZnGe alloy, the magnetic moments of Zn and Mn(B) are antiparallel to that of Mn(A), and we also found that the half-metallic properties of Mn₂ZnGe are insensitive to the dependence of lattice within the wide range of 5.69 and 5.80 Å where exhibiting perfect 100% spin polarization at the Fermi energy.     

Electronic and magnetic properties of single-wall GeC nanotubes filled with iron nanowires

Under GGA, the structural, electronic and magnetic properties of single-wall (8, 8) GeC nanotubes filled with iron Fe_n nanowires (n = 5, 9, 13 and 21) have been investigated systematically using the first-principles PAW potential within DFT. We find that the initial shapes of the Fe₅@(8, 8), Fe₉@(8, 8) and Fe₁₃@(8, 8) systems are preserved without any visible changes after optimization. But for the Fe₂₁@(8, 8) system, the initial shapes are distorted largely for both nanowire and nanotube. The binding processes of Fe_n@(8, 8) systems are exothermic, and Fe₅@(8, 8) system is the most stable structure. The pristine (8, 8) GeCNT is nonmagnetic and direct semiconductor with a wide band gap of about 2.65 eV. Projected densities of states onto different shell Fe atoms show that the separation between the bonding and antibonding d states is reduced as going from the core Fe atom to the outermost shell Fe atom. The spin polarization of the Fe_n@(8, 8) systems and free-standing nanowires are higher than that in bulk Fe. And the spin polarization generally decreases with the number n of the Fe atoms increasing for both the Fe_n@(8, 8) systems and free-standing nanowires. Both the largest spin polarization value itself and not more decrease with respect to value of free-standing Fe₅ nanowire suggest the Fe₅@(8, 8) system could be of interest for the use in electron spin injection. The magnetism is mainly confined within the inner Fe nanowire for these combined systems. More importantly, the Fe₅ nanowire encapsulated inside (8, 8) GeCNT is under the protection of the GeCNT to prevent from oxidation, thus may stably exist in atmosphere for long time and can be expected to have potential applications in building nanodevices.     

Co50Fe25-xMnxSi25系列合金的结构、磁性和半金属性研究

利用实验和能带计算相结合的方法,对介于两种预期的半金属Heusler合金Co₂FeSi和Co₂MnSi间的四元合金Co₅₀Fe_25-xMn_xSi₂₅的晶体结构、磁性、能带结构和半金属性进行了研究.采用考虑库仑相互作用的的广义梯度近似方法计算了系列合金的能带结构,通过与实验结果进行对比,揭示了成分变化过程中合金分子磁矩及原子磁矩的变化规律.研究发现, 关键词： 磁性 半金属 Heusler合金     

Spintronic properties of the Ti2CoB Heusler compound by density functional theory

The electronic structure and magnetic properties of the Ti₂CoB Heusler compound with a high-ordered CuHg₂Ti structure were investigated using the self-consistent full potential linearized augmented plane wave (FPLAPW) method within the density functional theory (DFT). Spin-polarized calculations show that the Ti₂CoB compound is half-metallic ferromagnetic with a magnetic moment of 2 μ_B at the equilibrium lattice constant, a=5.74 Å. The Ti₂CoB Heusler compound is ferromagnetic below the equilibrium lattice constant and ferrimagnetic above the equilibrium lattice constant. A large peak in majority-spin DOS and an energy gap in minority-spin DOS are observed at the Fermi level, yielding a spin polarization of 100%. A spin polarization higher than 90% is achieved for a wide range of lattice constants between 5.6 and 6.0 Å.     

Half-metallicity and magnetic properties of half-Heusler type Mn2Sn: Ab initio predictions

Ab initio calculations have been carried out to investigate the electronic structure and magnetism of the compound Mn₂Sn with the bcc half-Heusler structure. For the equilibrium lattice parameter 5.69 Å, Mn₂Sn is predicted to be a half-metallic fully compensated ferrimagnet (also called half-metallic antiferromagnet) with zero total spin moment. This zero moment agrees well with the Slater-Pauling curve and mainly comes from the compensated Mn (A) and Mn (B) spin moments in antiparallel configuration. The half-metallicity of Mn₂Sn is stable in a wide lattice-parameter range from 5.6 Å to 5.9 Å. Upon contraction of the lattice, a transition from half-metallicity to semimetallicity is observed.     

Verwey transition in spin polarization of field-emitted electrons from 〈1 1 0〉-oriented single crystal magnetite whisker

We measured temperature dependence of a spin polarization of field-emitted electrons from a single-crystalline magnetite (Fe₃O₄) whisker with 〈1 1 0〉 orientation. The spin polarization of emitted electrons began to increase above 130 K corresponding to the temperature of Verwey point (T_v). The increase is considered as reflection of the change of the spin state near the Fermi level due to the Verwey transition. Our experimental results support a localization of t_2g orbital electrons below the Verwey point and a model of charge ordering for magnetite.     

Magnetoresistance of magnetite thin films grown by pulsed laser deposition on GaAs(1 0 0) and Al2O3(0 0 0 1)

Magnetotransport properties of magnetite thin films deposited on gallium arsenide and sapphire substrates at growth temperatures between 473 and 673 K are presented. The films were grown by UV pulsed laser ablation in reactive atmospheres of O₂ and Ar, at working pressure of 8 × 10⁻² Pa. Film stoichiometry was determined in the range from Fe_2.95O₄ to Fe_2.97O₄. Randomly oriented polycrystalline thin films were grown on GaAs(1 0 0) while for the Al₂O₃(0 0 0 1) substrates the films developed a (1 1 1) preferred orientation. Interfacial Fe³⁺ diffusion was found for both substrates affecting the magnetic behaviour. The temperature dependence of the resistance and magnetoresistance of the films were measured for fields up to 6 T. Negative magnetoresistance values of ∼5% at room temperature and ∼10% at 90 K were obtained for the as-deposited magnetite films either on GaAs(1 0 0) or Al₂O₃(0 0 0 1).     

Half-metallic ferrimagnetism in Full-Heusler alloy Mn2CuMg

In the paper Ab initio electronic structure calculations are applied to study the electronic structure and magnetism properties of a new Mn-based Heusler alloy Mn₂CuMg. We take into account both possible L 2₁ structures (CuHg₂Ti and AlCu₂Mn types). The CuHg₂Ti-type structure is found to be energetically more favorable than the AlCu₂Mn-type structure and presents half-metallic ferrimagnetism. However, the case of exchanging X with Y atoms in generic formula loses its half-metallicity due to the symmetric surroundings. Calculations show that their total spin moment is −1μ_B for a wide range of equilibrium lattice constants and the total spin magnetic moment is attributed mainly to the two Mn atoms, while the Cu atom is almost non-magnetic. A small total spin moment origins from the antiparallel configurations of the Mn partial moments. The CuHg₂Ti-type Mn₂CuMg alloy keeps a 100% of spin polarization of conduction electrons at the Fermi level, thus opening the way to engineer new half-metallic alloys with the desired magnetic properties.     

First-principles study of half-metallic properties of the Heusler alloy Ti2CoGe

First-principles calculations have been performed on the electronic structures and magnetic properties of a new Ti₂Co-based full-Heusler alloy Ti₂CoGe. The calculations predict the Ti₂CoGe is a half-metallic ferromagnet at the equilibrium lattice constant with the minority-spin energy gap of 0.60 eV. It is found that the total magnetic moment (M_t) and the number of valence electrons (Z_t) in Ti₂CoGe obey a new Slater–Pauling (SP) rule of M_t=Z_t−18 and the rule also can be applied to other Ti₂Co-based half-metallic full-Heusler alloys. The Ti₂CoGe alloy keeps a 100% polarization at Fermi level and maintains the half-metallic character for lattice constants ranging between 6.05 and 6.67 Å.     

Magnetic ordering in Ni–Cd ferrite

A series of Ni_1−xCd_xFe₂O₄ (0.0≤x≤0.8) were prepared by conventional double sintering ceramic method and sintered at 1200 °C for 6 h. X-ray diffraction results confirmed the single-phase spinel structures of all the samples. The Curie temperature decreases linearly with increasing Cd content, which is explained due to the weakening of the A–B exchange interaction. The sample with x=0.7 shows re-entrant type of spin glass phase transitions. The magnetic moment and saturation magnetization at 20 K are found to increase with Cd content up to x=0.5 and then tends to decrease for x>0.5. The increase in magnetic moment with cadmium is attributed to Neel's two sublattice (A- and B-sublattice) collinear models according to which the magnetic moment is the vector sum of the lattice magnetic moment. The decrease in magnetization for x>0.5 obeys the Yafet–Kittel (Y–K) model. The increase in Y–K angles for x>0.3 indicates the increased tendency for triangular spin arrangements on B-sites. This suggests the existence of a canted spin structure in the ferrite system with higher content of Cd.     

Spin polarization measurements of Co2Mn (Ga0.5Sn0.5) thin films

Co₂MnGa_0.5Sn_0.5 (CMGS) thin films were epitaxially grown on MgO (0 0 1) substrates by magnetron sputtering and the current spin polarizations of the films with different post annealing conditions were measured by the point contact Andreev reflection method. The film deposited at a substrate temperature of 150 °C had a B2 structure and its spin polarization was estimated to be 59%. The film was ordered to the L2₁ structure by annealing at 600 °C, and the spin polarization was enhanced to 66%. The spin polarization and the intensity of the L2₁ diffraction showed clear correlation, suggesting L2₁ ordering is essential to achieve higher spin polarization of this quaternary Heusler alloy.     

Electronic, magnetic and transport properties of Co2TiZ (Z=Si, Ge and Sn): A first-principle study

We have studied the electronic structure, magnetic and transport properties of some Co based full Heusler alloys, namely Co₂TiZ (Z=Si, Ge and Sn), in the frame work of first-principle calculations. The calculations show that Co₂TiZ (X=Si, Ge and Sn) are to be half-metallic compounds with a magnetic moment of 2 μ_B, well consistent with the Slater-Pauling rule. The electronic structure results reveal that Co₂TiZ has the high density of states at the Fermi energy in the majority-spin state and show 100% spin polarization. Our results also suggest that both the electronic and magnetic properties in these compounds are intrinsically related to the appearance of the minority-spin gap. The origin of energy gap in the minority-spin states is discussed in terms of the electron splitting of Z (Z=Si, Ge and Sn) and 3d Co atoms and also the d-d hybridization between the Co and Ti atoms. The transport properties of these materials are discussed on the basis of Seebeck coefficients, electrical conductivity coefficients and thermal conductivity coefficients.     

Surface effects on the magnetic properties of Co2FeAl(0 0 1): An ab initio study

Electronic structures of the Co₂FeAl(0 0 1) surface are studied theoretically via first-principles calculations based on density functional theory. It is found that the minority spin band gap at the Fermi level in bulk Co₂FeAl disappears at the surface due to space localization of the states. However, beneath the surface, the density of states of individual atoms shows a trend of minority spin gap opening at the Fermi level, which indicates that the electronic structures become close to that of bulk Co₂FeAl. The termination of FeAl is more favorable for spin polarization of Co₂FeAl films than that of Co. Accordingly, we present a composite tri-layer model to illustrate the fading of the half-metallic property in Co₂FeAl films against the ideal character in bulk materials.