Effect of 3d metal ion doping on the structure and superconductivity of (Tl0.5Pb0.5)Sr2CaCu2O7

(Tl_0.5Pb_0.5)Sr₂Ca(Cu_2−xM_x)O₇ (M=Co, Ni and Zn) have been synthesized and investigated by means of X-ray diffraction, scanning electron microscope, electrical resistivity and magnetic susceptibility measurements. X-ray diffraction patterns show that all studied samples contain the nearly single ‘1212’ phase. They crystallize in a tetragonal unit cell with a=3.8028-3.8040 Å and c=12.0748-12.1558 Å. In (Tl_0.5Pb_0.5)Sr₂Ca(Cu_2−xM_x)O₇ system (M=Co or Ni), the superconducting critical temperature T_c decreases linearly with both Co and Ni concentrations and the rate of T_c decrease is around −6.5 and −7.0 K/at%, respectively. For (Tl_0.5Pb_0.5)Sr₂Ca (Cu_2−xZn_x)O₇ system, the dependence of T_c on the Zn dopant concentration deviates from a linear behavior and the Zn substitution suppresses T_c much less (−2.5 K/at%) than the Co and Ni substitutions. The suppression in T_c in Co and Ni doped samples are attributed to the magnetic pair-breaking mechanism and the reduction in the carrier concentration. The suppression of T_c in Zn doped samples is not caused by the reduction in carrier concentration which should remain constant, but rather due to nonmagnetic pair-breaking mechanism induced by disorder as well as the filling of the local Cu d_x²−y² state due to the full d band of Zn ions.     

Syntheses of optically efficient (La1−x−yCexTby)F3 nanocrystals via a hydrothermal method

Optically efficient cerium and terbium doped lanthanide fluoride (La_1−x−yCe_xTb_y)F₃ nanocrystals with different doping concentrations have been synthesized by a hydrothermal route in the presence of ethylenediamine tetraacetic acid disodium salt (EDTA). The results showed that the formation of nanocrystals with different morphologies depends on terbium ion Tb³⁺ doping concentration, but independent of cerium ion Ce³⁺ doping concentration. With increase in Tb³⁺ doping concentration, the morphologies of nanocrystals evolved from a spherical shape to a plated-like one. In addition, both the photoluminescence quantum yield (PL QY) and the fluorescence lifetime of nanocrystals increased with the increase in Ce³⁺ doping concentration in cerium and terbium co-doped system. The PL QY reached up to 55%, and the lifetime up to 7.3 ms. Transmission electron microscopy (TEM), X-ray diffraction (XRD), selected area electron diffraction (SAED), X-ray fluorescence (XRF), energy dispersive spectroscopy (EDS), ultraviolet-visible (UV-vis) absorption, photoluminescence (PL) and infrared (IR) spectroscopies were employed to characterize the properties of nanocrystals. The growth mechanism of nanocrystals with different morphologies and optical properties of nanocrystals with different doping concentrations were investigated.     

Magnetic properties of Ho1−xMmxCo2 (x=0, 0.1, 0.2, 0.3 and 0.4) alloys and their hydrides

The influence of Mm (Mm=mischmetal) substitution and hydrogen absorption on the magnetic properties of Ho_1−xMm_xCo₂ (x=0, 0.1, 0.2, 0.3 and 0.4) alloys have been determined through the temperature dependence of ac susceptibility and thermopower measurements. The changes in magnetic-ordering temperature of Ho_1−xMm_xCo₂ alloys have been explained based on the dilution of the magnetic ions and weakening of 4f–3d exchange interactions. The gradual disappearance of the magnetic transition temperature upon increasing hydrogen concentration (y) has been interpreted by the lattice expansion and charge transfer between absorbed hydrogen and 3d-band of Ho_1−xMm_xCo₂.     

Metamagnetic transition and magnetocaloric effect in charge-ordered Pr0.68Ca0.32−xSrxMnO3 (x=0, 0.1, 0.18, 0.26 and 0.32) compounds

In this study, magnetic and magnetocaloric properties of Pr_0.68Ca_0.32−xSr_xMnO₃ (x=0, 0.1, 0.18, 0.26 and 0.32) compounds were investigated. X-ray results indicated that all the samples have a single phase of orthorhombic symmetry. The orthorhombic unit cell parameters increase with the increase in Sr content. Large negative magnetic entropy changes (−26.2 J/kg K at 38 K and 5 T for x=0 and −6.5 J/kg K at 83 K and 6 T for x=0.1) were attributed to ultrasharp metamagnetic transitions. The peak value of ΔS_m decreased from −4.1 J/kg K for x=0.18 sample to −2.4 J/kg K for x=0.32 at 1 T magnetic field.     

Zn- and Cu-substituted Co2Y hexagonal ferrites: Sintering behavior and permeability

Y-type polycrystalline hexagonal ferrites Ba₂Co_2−x−yZn_xCu_yFe₁₂O₂₂ with 0≤x≤2 and 0≤y≤0.8 were prepared by the mixed-oxide route. Single phase Y-type ferrite powders were obtained after calcinations at 1000 °C. Samples sintered at 1200 °C show a permeability that increases with the substitution of Zn for Co and display maximum permeability of μ′=35 at 1 MHz for x=1.6 and y=0.4. A resonance frequency f_r=500 MHz is observed for Zn-rich ferrites with y=0 and 0.4. The saturation magnetization increases with substitution of Zn for Co. Addition of Bi₂O₃ shifts the temperature of maximum shrinkage down to T≤950 °C. Moreover, an increase of the Cu-concentration further lowers the sintering temperature to T≤900 °C, enabling co-firing of the ferrites with Ag metallization for multilayer technologies. However, low-temperature firing reduces the permeability to μ′=10 and the resonance frequency is shifted to 1 GHz. Thus substituted hexagonal Y-type ferrites can be used as soft magnetic materials for multilayer inductors for high frequency applications.     

X-ray absorption spectroscopic and magnetic characterization of cobalt-doped zinc oxide nanocrystals prepared by the molten-salt method

The local atomic arrangement and electronic structure of the Co-doped Zn_1−xCo_xO nanocrystal have been quantitatively examined along with its magnetic properties. According to our analysis using powder X-ray diffraction, electron microscopy, and Zn K-edge X-ray absorption spectroscopy (XAS), phase-pure wurzite-structured Zn_1−xCo_xO nanocrystals have been successfully synthesized via the molten-salt method. The Co K-edge XAS analysis clearly demonstrates that all the Co²⁺ ions are substituted for the tetrahedral Zn sites of the Wurzite structure with a coordination number of 3.9 and a bond distance of 1.97 Å, ruling out the presence of magnetic impurity phase and Co-metal cluster. Magnetization measurements reveal that the present Zn_1−xCo_xO sample does not show any ferromagnetic transition down to 2 K. In this regard, we can conclude that Co-doped zinc oxide is not ferromagnetic but the previously reported ferromagnetism in this phase would be an extrinsic property.     

Local structure and magnetic properties of Mn substituted manganites studied by EXAFS and Dc magnetic measurements

We report extended X-ray absorption fine structure (EXAFS) measurements at the Mn K edge and magnetic measurements performed on (La_1−xCa_x)(Mn_1−yM_y)O₃ samples (M=Cr or Ni; x=0.37 and 0.75 and y=0.03 or 0.08). The Mn substitution produces important effects on both the sides of the LaMnO₃-CaMnO₃ phase diagram. For x<0.5 the ferromagnetic-metallic phase maintains its main character even after Mn substitution, but both the doping species (Ni or Cr) lower T_C and broaden the magnetic transition, and the EXAFS study evidences two Mn-O distances, suggesting the presence of zones of distorted insulating phase. For x>0.5, after the doping with Cr, the charge ordered phase persists but on a shorter scale, whereas the Jahn-Teller distortion is weakened as indicated by EXAFS measurements, and the formation of ferromagnetic clusters is evidenced by magnetic measurements.EXAFS and magnetic measurements are in mutual agreement, thus confirming the correlation between the local disorder determined by charge localization and magnetic degrees of freedom.     

Magnetic characterization and thermoelectric power of Ni1−yZny Cu0.3Fe1.7 O4; 0.0⩽y⩽0.6

Samples of Ni_1−yZn_yCu_0.3Fe_1.7O₄; 0.0?y?0.6 were prepared by the solid state reaction method. X-ray investigations were carried out in order to assure the formation of the samples in single spinel phase. The analysis of X-ray data shows that the unit cell parameter increases with increasing Zn concentration and ascribed to the variation of the predicted cation distribution. Seebeck coefficient measurements were performed to know the type of charge carriers participating in the conduction mechanism. The magnetic susceptibility for the prepared samples was measured using Faraday^’s method at different temperatures as a function of the magnetic field intensity. The magnetic parameters were calculated from the magnetic susceptibility data, in the temperature range (300–800 K) at three different magnetic field intensities of (1280, 1733 and 2160 Oe). The effective magnetic moment (μ_eff) showed that, the critical Zn content was y=0.2$y=0.2$.     

Effect of Co or Mn addition on the soft magnetic properties of amorphous Fe89−xZr11Bx (x=5, 10) alloy ribbons

The temperature and field dependent magnetic properties of melt-spun amorphous Fe_89−x−yZr₁₁B_x(Co,Mn)_y (x=5, 10 and 0≤y≤10) alloys in the temperature range 5-1200 K are reported. The Curie temperature and saturation magnetization at room temperature increase (decrease) almost linearly with Co (Mn) addition. With increasing Co concentration, the room temperature coercivity increases at the rate of 2.26 (0.28) A/m per at% for the x=5 (10) samples. The high-field magnetic susceptibility and local magnetic anisotropy decrease (increases) rapidly with increasing Co (Mn) concentration. The thermomagnetic curves show a marked increase in magnetization above 850 K corresponding to the crystallization of α-FeCo (α-Fe) phase in samples containing Co (Mn). The Curie temperature of the crystalline phase increases (remains same) with increasing Co (Mn) concentration with the formation of α-FeCo (α-Fe). Addition of Co up to 10 at% in Fe-Zr-B improves the room temperature saturation magnetization from 0.56 to 1.2 T, and Curie temperature from 315 to 476 K. Also, the coercivity increases with Co addition from 1.27 to 23.88 A/m for x=5 and from 7.64 to 10.35 A/m for x=10 alloy. The non-collinear spin structures that characterize Fe rich Fe-Zr-B amorphous alloys have been used to describe the observed results.     

Facile synthesis of thiol-stabilized CdSexTe1−x nanocrystals

CdSe_xTe_1−x nanocrystals (x=0.25, 0.40, 0.50, 0.60 and 0.75) were synthesized using thioglycerol as a stabilizing agent. The composition of the CdSe_xTe_1−x nanocrystals was precisely controlled by tuning the precursor (Se/Te) ratio. The structural, morphological and optical properties of the nanocrystals were analyzed using X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), diffused reflectance spectroscopy (DRS) and photoluminescence (PL) measurements. It is found that the Se/Te ratio significantly affects the properties of the resultant CdSe_xTe_1−x nanocrystals. XRD pattern of the CdSe_xTe_1−x nanocrystals revealed cubic, hexagonal and mixed phases depending on the ratio of Se:Te. Surface morphology of the CdSe_xTe_1−x nanocrystals showed nanoclusters of sizes ∼50 nm, with the adjacent cluster interlinking each other. DRS revealed the size dependence band gap energy prevailing in the CdSe_xTe_1−x nanocrystals from 1.52 to 2.66 eV due to the optical bowing effect. PL measurements exhibited band edge emission in the visible spectral region, and are red shifted with increase in Se concentration. The facile route employed in the present work to synthesis the CdSe_xTe_1−x nanocrystals in an aqueous medium is simple and controllable, and the strategy presented will be handy in preparing diverse semiconducting nanocrystals.     

Superconductivity and magnetism of La2Cu1−xZnxO4+δ chemically oxidized by NaClO

The structural, superconducting and magnetic properties of La₂Cu_1−xZn_xO_4+δ (0≤x≤0.1) chemically oxidized by NaClO at room temperature were studied. All the samples before and after oxidation are single phase with orthorhombic structure, as indicated by their powder X-ray diffraction analysis. The iodometric titration results indicate that Zn-substituted La₂Cu_1−xZn_xO₄ is more favorable for the insertion of the excess oxygen, as compared to the Zn-free La₂CuO₄. The T_c suppression rate resulting from Zn substitution in La₂Cu_1−xZn_xO_4+δ is −12.4 K/%. The effective magnetic moment induced by the non-magnetic Zn ion is the order of one Bohr magneton, which decreases with increasing the Zn concentrations in the range examined. The latter two results are qualitatively well consistent with those obtained in La_2−xSr_xCu_1−yZn_yO₄ with the Sr optimal doping. This reveals that the non-magnetic Zn ions play the same role in both of the La₂Cu_1−xZn_xO_4+δ with the excess oxygen content of about 0.1 and the La_2−xSr_xCu_1−yZn_yO₄ with the Sr optimal doping.     

Magnetic properties of bio-synthesized zinc ferrite nanoparticles

The magnetic properties of zinc ferrite (Zn-substituted magnetite, Zn_yFe_1-yFe₂O₄) formed by a microbial process compared favorably with chemically synthesized materials. A metal reducing bacterium, Thermoanaerobacter, strain TOR-39 was incubated with Zn_xFe_1−xOOH (x=0.01, 0.1, and 0.15) precursors and produced nanoparticulate zinc ferrites. Composition and crystalline structure of the resulting zinc ferrites were verified using X-ray fluorescence, X-ray diffraction, transmission electron microscopy, and neutron diffraction. The average composition from triplicates gave a value for y of 0.02, 0.23, and 0.30 with the greatest standard deviation of 0.02. Average crystallite sizes were determined to be 67, 49, and 25 nm, respectively. While crystallite size decreased with more Zn substitution, the lattice parameter and the unit cell volume showed a gradual increase in agreement with previous literature values. The magnetic properties were characterized using a superconducting quantum interference device magnetometer and were compared with values for the saturation magnetization (M_s) reported in the literature. The averaged M_s values for the triplicates with the largest amount of zinc (y=0.30) gave values of 100.1, 96.5, and 69.7 emu/g at temperatures of 5, 80, and 300 K, respectively indicating increased magnetic properties of the bacterially synthesized zinc ferrites.     

Luminescent properties of HTP AgGd1−xW2O8:Eux and AgGd1−x(W1−yMoy)2O8:Eux phosphor for white LED

Intense red phosphors, AgGd_1−xEu_x(W_1−yMo_y)₂O₈ (x=0.0-1.0, y=0.0-1.0), have been synthesized through traditional solid-state reaction and characterized by X-ray diffraction (XRD) and photoluminescence (PL). XRD results reveal that AgGd_1−xEu_xW₂O₈ synthesized at 1000 °C has a tetragonal crystal structure, which is named as high temperature phase (HTP) AgGdW₂O₈. All phosphors compositions with Eu³⁺ show red and green emission on excitation either in the charge-transfer or Eu³⁺ levels. Analysis of the emission spectra with different Eu³⁺ concentrations reveal that the optimum dopant concentration for Eu³⁺ is x=0.6 in the HTP AgGd_1−xEu_xW₂O₈ (x=0.0-1.0). Studies on the AgGd_0.4Eu_0.6(W_1−yMo_y)₂O₈ (y=0.0-1.0) and AgGd_1−xEu_x(W_0.7Mo_0.3)₂O₈ (x=0.0-1.0) show that the emission intensity is maximum for compositions with y=0.3 and x=0.5, respectively, and a decrease in emission intensity is observed for higher y or x values. The Mo⁶⁺ and Eu³⁺ co-doped AgGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped AgGd(WO₄)₂ in UV region. The intense emission of the tungstate/molybdate phosphors under 394 and 465 nm excitations, respectively, suggests that these materials are promising candidates as red-emitting phosphors for near-UV/blue GaN-based white LED for white light generation.     

Magnetic and magnetoelastic properties of Zn-doped cobalt-ferrites—CoFe2−xZnxO4 (x=0, 0.1, 0.2, and 0.3)

Cobalt-ferrite (CoFe₂O₄) based materials are suitable candidates for magnetomechanical sensor applications owing to a strong sensitivity of their magnetostriction to an applied magnetic field. Zn-doped cobalt-ferrites, with nominal compositions CoFe_2−xZn_xO₄ (x=0–0.3), were synthesized by auto-combustion technique using Co- , Fe- , and Zn-nitrate as precursors. X-ray spectra analysis and Transmission electron microscopy studies revealed that the as-prepared powders were comprised of nano-crystalline (∼25–30 nm) cubic-spinel phase with irregularly-shaped grains morphology along with minor impurity phases. Calcination (800 °C for 3 h) of the precursor followed by sintering (1300 °C for 12 h) resulted in a single phase cubic-spinel structure with average grain size ∼2–4 μm, as revealed from scanning electron micrographs. The magnitude of coercive field decreases from ∼540 Oe for x=0 to 105 Oe for x=0.30. Saturation magnetization initially increases and peaks to ∼87 emu/g for x=0.2 and then decreases. The peak value of magnetostriction monotonically decreases with increasing Zn content in the range 0.0–0.3; however the piezomagnetic coefficient (dλ/dH) reaches a maximum value of 105×10⁻⁹ Oe⁻¹ for x=0.1. The observed variation in piezomagnetic coefficient in the Zn substituted cobalt ferrite is related to the reduced anisotropy of the system. The Zn-doped cobalt-ferrite (x=0.1) having high strain derivative could be a potential material for stress sensor application.     

Raman scattering and magnetizations studies of (Al, Cr)-codoped 4H-SiC

In this study, the insertion of both Al and Cr atoms into SiC matrix has been experimentally evidenced by X-ray diffraction, Raman scattering, elements analysis and magnetic measurements. Structure analysis showed that (Al, Cr)-codoped SiC has a single-phase 4H-crystal structure and no trace of any other impurity phases were detected. Raman scattering showed that several new features appeared in (Al, Cr)-codoped 4H-SiC: (1) the vanishing of the folded longitudinal-optical phonons modes-plasmon coupling (FLOPC) modes with x=(q/q_B)=0; (2) an obvious absorbing peak was found in Si_1−x−yAl_xCr_yC with y=0.0203 at%; (3) folded transverse-optical (FTO) mode shifts to high frequency and linewidths [full widths at half maximum (FWHM)] decrease with increase in Cr content. Magnetic properties characterizations showed that weak ferromagnetism order is established. With increase in Cr content, the magnetization decreased. No clear influence of Al doping on the magnetic properties of codoped 4H-SiC is evidenced while the magnetic origin should be ascribed to be induced by Cr. It is speculated that doping Cr elements at Si sites destroy the effective coupling of the spins induced by Al doping. The major role of Al is to stabilize the codoped crystal structure as 4H-single-phase.     

Magnetocaloric effect and multifunctional properties of Ni–Mn-based Heusler alloys

The studies of magnetocaloric properties, phase transitions, and phenomena related to magnetic heterogeneity in the vicinity of the martensitic transition (MT) in Ni–Mn–In and Ni–Mn–Ga off-stoichiometric Heusler alloys are summarized. The crystal structure, magnetocaloric effect (MCE), and magnetotransport properties were studied for the following alloys: Ni₅₀Mn_50−xIn_x, Ni_50−xCo_xMn₃₅In₁₅, Ni₅₀Mn_35−xCo_xIn₁₅, Ni₅₀Mn₃₅In₁₄Z (Z=Al, Ge), Ni₅₀Mn₃₅In_15−xSi_x, Ni_50−xCo_xMn_25+yGa_25−y, and Ni_50–xCo_xMn_32−yFeyGa₁₈. It was found that the magnetic entropy change, ΔS, associated with the inverse MCE in the vicinity of the temperature of the magneto-structural transition, TM, persists in a range of (125-5) J/(kg K) for a magnetic field change ΔH=5 T. The corresponding temperature varies with composition from 143 to 400 K. The MT in Ni₅₀Mn_50−xIn_x (x=13.5) results in a transition between two paramagnetic states. Associated with the paramagnetic austenite-paramagnetic martensite transition ΔS=24 J/(kg K) was detected for ΔH=5 T at T=350 K. The variation in composition of Ni₂MnGa can drastically change the magnetic state of the martensitic phase below and in the vicinity of TM. The presence of the martensitic phase with magnetic moment much smaller than that in the austenitic phase above TM leads to the large inverse MCE in the Ni₄₂Co₈Mn_32−yFeyGa₁₈ system. The adiabatic change of temperature (ΔT_ad) in the vicinity of TC and TM of Ni₅₀Mn₃₅In₁₅ and Ni₅₀Mn₃₅In₁₄Z (Z=Al, Ge) was found to be ΔT_ad=−2 K and 2 K for ΔH=1.8 T, respectively. It was observed that |ΔT_ad|≈1 K for ΔH=1 T for both types of transitions. The results on resistivity, magnetoresistance, Hall resistivity in some In-based alloys are discussed.     

Control of luminescence and conductivity of delafossite-type CuYO2 by substitution of rare earth cation (Eu, Tb) and/or Ca cation for Y cation

Delafossite-type oxides of CuTb_yY_1−yO₂, CuEu_yY_1−yO₂, CuCa_xTb_yY_1−x−yO₂ and CuCa_xEu_yY_1−x−yO₂ have been prepared by solid state reactions. The lattice-parameter dependence on the composition implies substitution of the Tb³⁺, Eu³⁺ and Ca²⁺ cations for the Y³⁺ site. Noticeable sharp emission lines due to the f-f transitions (⁵D₄→⁷F_J, J=3-6) of Tb³⁺ or due to the f-f transitions (⁵D₀→⁷F_J, J=0-4) of Eu³⁺ are observed at room temperature. Electrical conductivities of CuCa_xTb_yY_1−x−yO₂ and CuCa_xEu_yY_1−x−yO₂ are larger than those of CuTb_yY_1−yO₂ and CuEu_yY_1−yO₂, indicating the increase of the hole concentration caused by the substitution of Ca²⁺ for the Y³⁺ site. These results indicate the controllability of the luminescence and conductivity in CuCa_xTb_yY_1−x−yO₂ and CuCa_xEu_yY_1−x−yO₂ delafossite-type oxides by simultaneous substitution of the rare earth Tb³⁺ or Eu³⁺ cation and the Ca²⁺ cation for the Y³⁺ site.     

Influence of Cd and Cr substitutions on the magnetization and permeability of magnesium ferrites

Magnetization and permeability of polycrystalline ferrites with general formula Cd_xMg_1−xFe_2−yCr_yO₄ (x=0, 0.2, 0.4, 0.6, 0.8, 1.0; y=0, 0.05 and 0.10) were studied. Study of saturation magnetization reveals that the Neel's two-sublattice model exists upto x=0.4, for y=0, 0.05 and 0.1 and a three-sublattice model (YK-model) is predominant for x>0.4 and y=0, 0.05 and 0.10. The saturation magnetization and magnetic moment were found to decrease with the increase in Cr³⁺ contents, which is attributed to the dilution of B–B site interaction. Variation of initial permeability with temperature revealed the long-range ferromagnetic ordering in the compounds with x=0.4. The sample with x?0.4 and y=0, 0.05 and 0.10 showed peaking behavior near Curie temperature, which is attributed to the decrease of anisotropy constant K₁ to zero. Low-frequency dispersion of initial permeability suggests domain wall displacement. Addition of Cd²⁺ resulted in a sharp decrease in Curie temperature. With the addition of Cr³⁺, initial permeability was found to decrease.     

Structural characterization and ytterbium spectroscopy in Sc2O3 nanocrystals

Ytterbium-doped scandium oxide nanocrystals measuring less than 25 nm with compositions of Sc_2−xYb_xO₃ (x=0.001-1) were prepared using the modified Pechini method. The Yb:Sc₂O₃ nanocrystals were obtained by calcination at low temperature such as 1073 K for 2 h. X-ray powder diffraction (XRD) and transmission electronic microscopy (TEM) were used to perform the structural characterization of nanocrystals; these studies indicated that the nanocrystals have high crystalline quality with cubic structure and Ia3¯ space group. The morphology and particle size were studied using electron microscopy. A detailed study of the effect of the nanodimension and the ytterbium concentration on the spectroscopic characteristics of Yb³⁺ as an active ion was carried out in terms of optical absorption, optical emission and fluorescence decay time at room and low temperature.     

Effect of elevated concentrations of strontium and iron on the structural and dielectric characteristics of Ba(1−x−y)Sr(x)Ti Fe(y)O3 prepared through sol–gel technique

Nano-composite Ba_1−xSr_(x)TiO₃ (BST), where x=0.01–0.50 and doped with different concentrations of iron Ba_(1−x−y)Sr_(x)TiFe _(y)O₃ (BSTF), where x=0.01 and y=0.01–0.05 powders were prepared by sol–gel method.