Quantitation of human glutathione S-transferases in complex matrices by liquid chromatography/tandem mass spectrometry with signature peptides

Direct quantitation of glutathione S-transferase (GST) isoforms [alpha (GST-A) and micro (GST-M)] in human liver cytosol was achieved by liquid chromatography/tandem mass spectrometry (LC/ESI-MS/MS) analysis of signature peptides of GST-A and GST-M and their corresponding stable isotopic peptide internal standards via multiple reaction monitoring (MRM). The selection of signature peptides was performed via trypsin digestion of commercially available cDNA-expressed GST-A1 and GST-M1, followed by LC/ESI-MS/MS with an ion trap mass spectrometer and sequencing with the TurboSEQUEST application. Quantitative analysis of the selected signature peptides in the multi-reaction monitoring (MRM) mode was performed using a triple-quadruple mass spectrometer. A series of human cytosol samples was quantitatively analyzed for levels of GST-A and GST-M. The total level of GST-A and GST-M obtained from this LC/ESI-MS/MS method was well correlated with the total level of GST determined by the 1-chloro-2,4-dinitrobenzene (CDNB) method.     

Ultra‐high performance liquid chromatography tandem mass spectrometry for the detection of durum wheat contamination or adulteration

In this work, an ultra‐performance liquid chromatography electrospray ionization (UPLC‐ESI)‐MS/MS methodology based on multiple reaction monitoring (MRM) for the selective and sensitive detection and quantification of durum wheat adulteration has been developed and fully validated. The targeted analysis was performed by monitoring specific transitions at m/z 543.7 > 657.4 and m/z 543.7 > 299.2 of a species‐specific marker derived from a tryptic peptide of puroindoline a (Pin‐a), a cysteine‐rich protein selectively present only in common wheat. In addition, two transitions at m/z 500.4 > 725.4 and m/z 500.4 > 561.9 of a reference peptide belonging to purothionin A‐1, present in both species, were also monitored. The calibration curves obtained on binary mixtures with known percentages of common/durum wheat flours showed linearity (coefficient of regression, r ≥ 0.99) over concentrations that ranged between 80 and 1%. The limit of detection (LOD) and limit of quantification (LOQ) for the Pin‐a marker in wheat flours were 0.01 and 0.03%, respectively. The identified Pin‐a marker was also found to be highly diagnostic for the quantification of common wheat in raw materials (kernels) and processed products (pasta), thus offering new opportunities to assess food authenticity. Copyright © 2014 John Wiley & Sons, Ltd.     

Solid-phase microextraction-gas chromatography-mass spectrometry of biologically active substances in water samples

High-flow pneumatically assisted electrospray ionization mass spectrometry (ESI-MS) has been extensively used for the characterization and determination of peptides and peptide hormones available for biomedical research and therapeutic applications. The aim of this study was to optimize a method of characterization and determination of a mixture of peptide hormones with therapeutic interest by liquid chromatography (LC) coupled to ESI-MS. In this work the linear solvation energy relationship methodology was used in order to optimize the mobile phase to be used in the LC separation of the peptide hormone series and the operational parameters of the source and analyzer of ESI were also optimized to obtain the best signal stability and the highest sensitivity. To validate the proposed method for peptide hormone analysis, quality parameters were determined and satisfactory results were obtained. Likewise, the method detection limit was picomole level for most of the peptides employing selected-ion monitoring of the [M+nH]n+ ions.     

Durum wheat adulteration detection by NIR spectroscopy multivariate calibration

In the present work, we explored the possibility of using near-infrared spectroscopy in order to quantify the degree of adulteration of durum wheat flour with common bread wheat flour. The multivariate calibration techniques adopted to this aim were PLS and a wavelet-based calibration algorithm, recently developed by some of us, called WILMA. Both techniques provided satisfactory results, the percentage of adulterant present in the samples being quantified with an uncertainty lower than that associated to the Italian official method. In particular the WILMA algorithm, by performing feature selection, allowed the signal pretreatment to be avoided and obtaining more parsimonious models.     

Novel phosphoryl derivatization method for peptide sequencing by electrospray ionization mass spectrometry

A one-step phosphoryl derivatization method has been used in a peptide sequencing procedure for electrospray ionization tandem mass spectrometry (ESI-MS/MS). The sodiated derivatized peptides exhibit very simple dissociation patterns, in which two kinds of fragment ions, [b(n) + OH + Na]+ and [a(n) + Na]+, are formed. Since the amino acid residues are lost sequentially from the C-terminus, peptide sequences can be identified easily. The fragmentation efficiency of peptides increased as a result of the phosphorylation, and also provided peaks of useful intensity at lower m/z. A peptide with lysine at the C-terminus was derivatized and analyzed by ESI-MS/MS. Similar mass spectra, from which the sequence could be read out, were obtained. This is a novel derivatization method yielding neutral derivatives that should be suitable for peptide sequencing by LC/ESI-MS/MS.     

Alkaline liquid chromatography/electrospray ionization skimmer collision-induced dissociation mass spectrometry for phosphopeptide screening.

A rapid on-line method for the identification of phosphorylated peptides in enzymatic protein digests by specific marker ion signals is described. In our study we investigated the use of alkaline conditions together with a previously described method for selective and sensitive detection of phosphopeptide ions combining high-performance capillary liquid chromatography (LC) and electrospray ionization mass spectrometry (ESI-MS). Phosphorylation-specific marker ions (m/z 79, PO(3)(-), and m/z 97, H(2)PO(4)(-)) were generated by skimmer collision-induced dissociation (sCID) in the negative-ion mode. The method was evaluated and validated for mono-phosphorylated synthetic peptides using different alkaline pH values and CID offsets. Alkaline conditions (pH 10.5) enhance the generation of phosphopeptide-specific fragment ions from serine- and tyrosine-phosphorylated peptides, and enable the use of m/z 79 (PO(3)(-)) and m/z 97 (H(2)PO(4)(-)) as phosphorylation-specific marker traces. Note that HPLC separation in trifluoroacetic acid containing solvents impairs the use of m/z 97 (C(2)F(3)O(-) fragment ion at m/z 97) as a phosphorylation-specific marker. The optimized method was applied for the detection of phosphorylated peptides in a tryptic beta-casein digest. The expected mono- and tetra-phosphorylated peptides were detected and rapidly identified by (mu)LC/ESI-sCID-MS and (mu)LC/ESI-MS analysis.     

Identification of microbial mixtures by LC-selective proteotypic-peptide analysis (SPA)

This paper describes a method--using a combination of LC-MS/MS of selected bacteria-specific peptides and database search--for determining the species of bacteria present in a mixture. We identified the proteotypic peptides that were associated with specific bacteria by searching protein databases for the LC-MS/MS data. The retention time windows for specific peptide markers were used as an extra constraint so that the peptide markers of many bacterial species could be analyzed in a single LC-selective proteotypic-peptide analysis (SPA). We performed LC-MS/MS analyses on the proteolytic digest of cell extracts and monitored only the selected marker peptide ions at given elution time windows. The corresponding bacterial species could be characterized when the selected peptides that eluted at expected elution windows were identified correctly from the database. We managed to identify up to eight bacterial species simultaneously during a single LC-MS/MS analysis, as well as bacteria mixed in various abundances. Two marker ions having similar values of m/z, but obtained from two different bacterial samples, which would otherwise be selected as precursors within mass tolerance and would complicate the MS/MS data, were time-resolved using LC and then used to correctly identify their bacterial sources. The coupling of selective MS/MS monitoring with separation methods, such as LC, provides a highly selective and accurate analytical method for characterizing complex mixtures of bacterial species.     

Structural analysis of naphthoquinone protein adducts with liquid chromatography/tandem mass spectrometry and the scoring algorithm for spectral analysis (SALSA)

The relative reactivities of various naphthoquinone isomers (1,4-, 1,2- and 2-methyl-1,4-naphthoquinone) to two test proteins, apomyoglobin and human hemoglobin, were evaluated via liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS). The structural characterization of the resulting adducts was also obtained by LC/ESI-MS analysis of the intact proteins. The reactive sites of apomyoglobin and human hemoglobin with 1,4-naphthoquinone and 1,2-naphthoquinone were also identified through characterization of adducted tryptic peptides by use of high-pressure liquid chromatography/electrospray ionization with tandem mass spectrometry (HPLC/ESI-MS/MS), TurboSEQUEST, and the scoring algorithm for spectral analysis (SALSA). Four adducted peptides, which were formed by nucleophilic addition of a lysine amino acid residue to 1,4-naphthoquinone, were also identified, as was an adducted peptide from incubation of 1,2-naphthoquinone with apomyoglobin. In the case of incubation of human hemoglobin with the two naphthoquinones, two adducted peptides were identified from the N-terminal valine modification of the alpha and beta chains of human hemoglobin. The adducted protein formation may imply that naphthalene produces its in vivo toxicity through 1,2- and 1,4-naphthoquinone metabolites reacting with biomolecular proteins.     

Peptide fingerprinting of snake venoms by direct infusion nano-electrospray ionization mass spectrometry: potential use in venom identification and taxonomy

Fingerprinting by mass spectrometry has been increasingly used to study venom variations and for taxonomic analyses based on venom components. Most of these studies have concentrated on components heavier than 3 kDa, but Bothrops snake venoms contain many biologically active peptides, principally C-type natriuretic peptides and bradykinin-potentiating peptides (BPPs). In this work, we have examined the peptide profile of Bothrops venoms (B. alternatus, B. erythromelas, B. insularis, B. jararaca, B. jararacussu, B. leucurus and B. moojeni) using direct infusion nano-electrospray ionization mass spectrometry (nano-ESI-MS) subjecting the data further to principal components analysis (PCA) to assess whether the peptide distributions are reliable in distinguishing the venoms. ESI-MS of a low molar mass fraction obtained by ultrafiltration of each venom (5 kDa nominal cutoff filters) revealed that the venoms have a variety of peptides in common but that each venom also contains taxonomic marker peptides not shared with other venoms. One BPP peptide, QGGWPRPGPEIPP, was found to be common to the seven Bothrops species examined. This peptide may represent a specific marker for this genus since it was not found in the venom of the South American rattlesnake, Crotalus durissus terrificus. PCA on the ESI-MS data reveals a close relationship between B. jararaca, B. jararacussu and B. moojeni venoms, with B. leucurus and B. erythromelas being more distant from these three; B. alternatus and B. insularis were also located distant from these five species, as was C. d. terrificus. These results agree partially with established phylogenetic relationships among these species and suggest that ESI-MS peptide fingerprinting of snake venoms coupled with PCA is a useful tool for identifying venoms and for taxonomic analyses.     

基于真菌毒素污染差异的液相色谱-串联质谱法鉴别板栗粉中掺假小麦粉

建立了分散固相萃取-超快速液相色谱-串联质谱法同时测定板栗粉和小麦粉中43种真菌毒素的方法,对48份板栗粉和80份小麦粉样品的污染状况进行调查,筛选出5种专属于小麦粉的标志性真菌毒素.样品采用84％(v/v)乙腈水溶液提取,提取液采用C18结合增强型脂质去除净化剂(EMR-Lipid)净化,采用响应曲面-中心组合设计优...     

Method development aspects for the quantitation of pharmaceutical compounds in human plasma with a matrix-assisted laser desorption/ionization source in the multiple reaction monitoring mode

The present work investigates various method development aspects for the quantitative analysis of pharmaceutical compounds in human plasma using matrix-assisted laser desorption/ionization and multiple reaction monitoring (MALDI-MRM). Talinolol was selected as a model analyte. Liquid-liquid extraction (LLE) and protein precipitation were evaluated regarding sensitivity and throughput for the MALDI-MRM technique and its applicability without and with chromatographic separation. Compared to classical electrospray liquid chromatography/mass spectrometry (LC/ESI-MS) method development, with MALDI-MRM the tuning of the analyte in single MS mode is more challenging due to interfering matrix background ions. An approach is proposed using background subtraction. With LLE and using a 200 microL human plasma aliquot acceptable precision and accuracy could be obtained in the range of 1 to 1000 ng/mL without any LC separation. Approximately 3 s were required for one analysis. A full calibration curve and its quality control samples (20 samples) can be analyzed within 1 min. Combining LC with the MALDI analysis allowed improving the linearity down to 50 pg/mL, while reducing the throughput potential only by two-fold. Matrix effects are still a significant issue with MALDI but can be monitored in a similar way to that used for LC/ESI-MS analysis.     

Determination of ricin by nano liquid chromatography/mass spectrometry after extraction using lactose-immobilized monolithic silica spin column

Ricin is a glycosylated proteinous toxin that is registered as toxic substance by Chemical Weapons convention. Current detection methods can result in false negatives and/or positives, and their criteria are not based on the identification of the protein amino acid sequences. In this study, lactose-immobilized monolithic silica extraction followed by tryptic digestion and liquid chromatography/mass spectrometry (LC/MS) was developed as a method for rapid and accurate determination of ricin. Lactose, which was immobilized on monolithic silica, was used as a capture ligand for ricin extraction from the sample solution, and the silica was supported in a disk-packed spin column. Recovery of ricin was more than 40%. After extraction, the extract was digested with trypsin and analyzed by LC/MS. The accurate masses of molecular ions and MS/MS spectra of the separated peptide peaks were measured by Fourier transform-MS and linear iontrap-MS, respectively. Six peptides, which were derived from the ricin A-(m/z 537.8, 448.8 and 586.8) and B-chains (m/z 701.3, 647.8 and 616.8), were chosen as marker peptides for the identification of ricin. Among these marker peptides, two peptides were ricin-specific. This method was applied to the determination of ricin from crude samples. The monolithic silica extraction removed most contaminant peaks from the total ion chromatogram of the sample, and the six marker peptides were clearly detected by LC/MS. It takes about 5 h for detection and identification of more than 8 ng/ml of ricin through the whole handling, and this procedure will be able to deal with the terrorism using chemical weapon.     

溴化氰裂解结合电喷雾串联质谱测定电泳分离蛋白的C端序列

C端测序是蛋白质及多肽一级结构确认的重要组成部分,也是重组蛋白药物质量控制的重要依据。建立了溴化氰裂解结合电喷雾串联质谱测定蛋白质C端序列的方法,并应用于重组人肿瘤坏死因子受体和纽兰格林的C端测序。首先根据待测蛋白序列进行溴化氰理论裂解,如果C-端肽段理论分子量在500~5000U之间,则将待测样品进行SDS-PAGE分离,考马斯亮兰染色,然后进行胶内溴化氰裂解,最后应用基质辅助激光解吸/电离飞行时间质谱(MALDI-TOF-MS)测定C-端肽段的分子量,电喷雾串联质谱对C端肽段进行测序。应用本方法分别测定了这两个蛋白质C端19个和11个氨基酸残基序列。研究结果表明:本方法灵敏、有效、实用性较强,可适用于部分重组蛋白药物的质量控制和蛋白质的结构确证,是对目前蛋白质C端测序方法的有效补充。     

Measurement of water absorption capacity in wheat flour by a headspace gas chromatographic technique

The purpose of this work is to introduce a new method for quantitatively analyzing water absorption capacity in wheat flour by a headspace gas chromatographic technique. This headspace gas chromatographic technique was based on measuring the water vapor released from a series of wheat flour samples with different contents of water addition. According to the different trends between the vapor and wheat flour phase before and after the water absorption capacity in wheat flour, a turning point (corresponding to water absorption capacity in wheat flour) can be obtained by fitting the data of the water gas chromatography peak area from different wheat flour samples. The data showed that the phase equilibrium in the vial can be achieved in 25 min at desired temperature (35°C). The relative standard deviation of the reaction headspace gas chromatographic technique in water absorption capacity determination was within 3.48%, the relative differences has been determined by comparing the water absorption capacity obtained from this new analytical technique with the data from the reference technique (i.e., the filtration method), which are less than 8.92%. The new headspace gas chromatographic method is automated, accurate and be a reliable tool for quantifying water absorption capacity in wheat flour in both laboratory research and mill applications.     

Determination of deoxynivalenol in whole wheat flour and wheat bran

A liquid chromatographic (LC) method was developed for determining deoxynivalenol (DON) in whole wheat flour and wheat bran. A 15 g test sample was extracted with acetonitrile-water (84 + 16, v/v) and applied to a Romer MycoSep cleanup column. The eluate was dried and then reconstituted in a 0.1 M phosphate buffer, pH 7.0, and applied to a Vicam DONtest-LC cleanup column. The methanol eluate was chromatographed with a methanol-water (17 + 83, v/v) mobile phase on a C18 column with UV detection at 220 nm. Five replicates at each of 5 fortification levels (0.25, 0.50, 1.0, 2.0, and 4.0 ppm), plus 5 controls, were determined for both whole wheat flour and wheat bran. For flour, the average recoveries were 72.2-91.5% with relative standard deviations (RSDs) of 4.9-18.4%. The intra-assay flour recovery was 82.4% with 9.8% RSD. A 5 replicate sample of naturally incurred wheat had an average of 1.1 ppm DON with 6.7% RSD. For bran, average recoveries of fortified samples were 69.5-99.7% with RSDs of 1.7-18.8%. The intra-assay bran recovery was 81.5% with 8.9% RSD. The limit of detection (about 3x noise) for the method is 0.05 ppm; the correlation coefficient (linearity) was >0.9995. The DON peak was clearly identified and easily integrated in the chromatograms.     

A shotgun tandem mass spectrometric analysis of phospholipids with normal-phase and/or reverse-phase liquid chromatography/electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry is used in lipidomics studies. The present research established a top-down liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS) shotgun analysis method for phospholipids (PLs) using a normal-phase column or a C30 reverse-phase column with the data-dependent MS/MS scanning mode. A normal-phase column can separate most of the major different classes of PLs. By using LC/ESI-MS/MS with a normal-phase column, approximately 50 molecular species were identified in a PL mixture from rat liver. When the reverse-phase column was used, the PLs could be separated depending on their hydrophobicity, essentially the length of their fatty acyl chains and the number of unsaturated bonds in them. The LC/ESI-MS/MS method using a C30 reverse-phase column was applied to phosphatidylcholine (PC) and phosphatidylethanolamine (PE) mixtures as test samples. Molecular species with the same molecular mass but with different pairs of fatty acyl chains were separately identified. As a result, about 60 PC and 50 PE species were identified. PLs from rat liver were subjected to LC/ESI-MS/MS using the C30 reverse-phase column and about 110 molecular species were identified. Off-line two-dimensional LC/ESI-MS/MS with the normal-phase and C30 reverse-phase columns allowed more accurate identification of molecular species by using one-dimensional C30 reverse-phase LC/ESI-MS/MS analysis of the collected fractions.     

Relative quantitation of peptides in wild-type and Cpe(fat/fat) mouse pituitary using stable isotopic tags and mass spectrometry

Cpe(fat/fat) mice have a point mutation in the coding region of the carboxypeptidase E gene that renders the enzyme inactive. As a result, these mice have reduced levels of several neuropeptides and greatly increased levels of the peptide processing intermediates that contain C-terminal basic residues. However, previous studies examined a relatively small number of neuropeptides. In the present study, we used a quantitative peptidomics approach with stable isotopic labels to examine the levels of pituitary peptides in Cpe(fat/fat) mice relative to wild-type mice. Pituitary extracts from mutant and wild type mice were labeled with the stable isotopic label [3-(2,5-dioxopyrrolidin-1-yloxycarbonyl)propyl]trimethylammonium chloride containing nine atoms of hydrogen or deuterium. Then, the two samples were pooled and analyzed by liquid chromatography/mass spectrometry (LC/MS). The relative abundance of peptides was determined from a comparison of the intensities of the heavy and light peaks. Altogether, 72 peptides were detected in the Cpe(fat/fat) and/or wild-type mouse pituitary extracts of which 53 were identified by MS/MS sequencing. Several peptides identified in this analysis represent previously undescribed post-translational processing products of known pituitary prohormones. Of the 72 peptides detected in pituitary, 17 were detected only in the Cpe(fat/fat) mouse extracts; these represent peptide processing intermediates containing C-terminal basic residues. The peptides common to both Cpe(fat/fat) and wild-type mice were generally present at 2-5-fold lower levels in the Cpe(fat/fat) mouse pituitary extracts, although some peptides were present at equal levels and one peptide (acetyl beta-endorphin 1-31) was increased approximately 7-fold in the Cpe(fat/fat) pituitary extracts. In contrast, acetyl beta-endorphin 1-26 was present at approximately 10-fold lower levels in the Cpe(fat/fat) pituitary, compared with wild-type mice. The finding that many peptides are substantially decreased in Cpe(fat/fat) pituitary is consistent with the broad role for carboxypeptidase E in the biosynthesis of numerous neuropeptides.     

Analysis of sulfated peptides from the skin secretion of the Pachymedusa dacnicolor frog using IMAC-Ga enrichment and high-resolution mass spectrometry

Immobilized metal ion affinity chromatography (IMAC) has been widely used for the enrichment of phosphopeptides, whereas no report exists describing the use of IMAC columns for the enrichment of sulfopeptides. In this study, we used IMAC-Ga microcolumns for the enrichment of sulfopeptides from a complex mixture of peptides, extracted from skin secretions of the Pachymedusa dacnicolor frog. The enriched fraction obtained by IMAC-Ga was analyzed by liquid chromatograpy/electrospray ionization mass spectrometry (LC/ESI-MS) in an Orbitrap XL and by matrix-assisted laser desorption/ionization time-of-flight time-of-flight (MALDI-TOF/TOF) in an ABI 4800 instrument. From this fraction, different sulfated and non-sulfated peptides belonging to the caerulin and bradykinin families were structurally characterized. Other interesting negatively charged groups, such as phosphate adducts of dermaseptins and pyridoxal phosphate attached to a protease inhibitor, were also characterized. Unexpectedly, some dermaseptin antimicrobial peptides were also enriched by IMAC-Ga and a Sauvatine-like peptide was also fully sequenced. Furthermore, neutral loss of sulfated peptides and their fragmentation patterns in the gas phase were also compared using collision-induced dissociation (CID) and high-energy collision dissociation (HCD). Our present study provides evidence that IMAC-Ga enrichment is a fast, useful and promising method for high-throughput analysis of sulfated-peptides, since high-resolution mass spectrometers can be used for this purpose.     

Determination of deoxynivalenol in cereals and cereal products by immunoaffinity column cleanup with liquid chromatography: interlaboratory study

An interlaboratory study was performed on behalf of the UK Food Standards Agency to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatographic (LC) method for the determination of deoxynivalenol in a variety of cereals and cereal products at proposed European regulatory limits. The test portion was extracted with water. The sample extract was filtered a applied to an immunoaffinity column. After being washed with water, the deoxynivalenol was eluted with acetonitrile or methanol. Deoxynivalenol was quantitated by reversed-phase LC with UV determination. Samples of artificially contaminated wheat-flour, rice flour, oat flour, polenta, and wheat based breakfast cereal, naturally contaminated wheat flour, and blank (very low level) samples of each matrix were sent to 13 collaborators in 7 European countries. Participants were asked to spike test portions of all samples at a range of deoxynivalenol concentrations equivalent to 200-2000 ng/g deoxynivalenol. Average recoveries ranged from 78 to 87%. Based on results for 6 artificially contaminated samples (blind duplicates), the relative standard deviation for repeatability (RSDr) ranged from 3.1 to 14.1%, and the relative standard deviation for reproducibility (RSDR) ranged from 11.5 to 26.3%. The method showed acceptable within-laboratory and between-laboratory precision for all 5 matrixes, as evidenced by HorRat values < 1.3.     

Development and in-house validation of a robust and sensitive solid-phase extraction liquid chromatography/tandem mass spectrometry method for the quantitative determination of aflatoxins B1, B2, G1, G2, ochratoxin A, deoxynivalenol, zearalenone, T-2 and HT-2 toxins in cereal-based foods

A sensitive and robust liquid chromatography/tandem mass spectrometry (LC/MS/MS) method was developed for the simultaneous determination of aflatoxins (B(1), B(2), G(1), G(2)), ochratoxin A, deoxynivalenol, zearalenone, T-2 and HT-2 toxins in cereal-based foods. Samples were extracted with a mixture of acetonitrile/water (84:16, v/v) and cleaned up through a polymeric solid-phase extraction column. Detection and quantification of the nine mycotoxins were performed by reversed-phase liquid chromatography coupled with electrospray ionization triple quadrupole mass spectrometry (LC/ESI-MS/MS), using fully (13)C-isotope-labelled mycotoxins as internal standards. The method was validated in-house for five different cereal processed products, namely barley, oat and durum wheat flours, rye- and wheat-based crisp bread. Recoveries and repeatability of the whole analytical procedure were evaluated at contamination levels encompassing the EU maximum permitted levels for each tested mycotoxin. Recoveries ranged from 89 to 108% for deoxynivalenol, from 73 to 114% for aflatoxins, from 85 to 114% for T-2 and HT-2 toxins, from 64 to 97% for zearalenone, from 74 to 102% for ochratoxin A. Relative standard deviations were less than 16% for all tested mycotoxins and matrices. Limits of detection (signal-to-noise ratio 3:1) ranged from 0.1 to 59.2 μg/kg. The trueness of the results obtained by the proposed method was demonstrated by analysis of reference materials for aflatoxins, deoxynivalenol, zearalenone. The use of inexpensive clean-up cartridges and the increasing availability of less expensive LC/MS/MS instrumentation strengthen the potential of the proposed method for its effective application for reliable routine analysis to assess compliance of tested cereal products with current regulation.