Synthesis and Luminescence of Eu‐N2,N6‐Bis(2‐hydroxyethyl)pyridine‐2,6‐dicarboxamide Complexes Containing Mesoporous Material

Ligand N²,N⁶‐bis(2‐hydroxyethyl)pyridine‐2,6‐dicarboxamide (L=BHPC) was synthesized and used to construct lanthanide‐based mesoporous material Eu‐L‐MCM‐41. In the structure of resulting Eu‐L‐MCM‐41, Eu³⁺ was chelated by BHPC, and the Eu‐L complexes were anchored into the forming MCM‐41 host by the reaction between the hydroxyl group and active Si‐OH. The mesoporous material Eu‐L‐MCM‐41 was characterized by UV, IR, small‐angle X‐ray diffraction (SAXRD) patterns, nitrogen adsorption/desorption isotherms, TGA and fluorescence spectra. The results indicate that ligand and Eu³⁺ have been introduced into the MCM‐41 host, and Eu‐L‐MCM‐41 exhibits characteristic luminescence of Eu³⁺.     

Synthesis and characterization of indium and thallium immobilized on isonicotinamide‐functionalized mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides

Two highly ordered isonicotinamide (INA)‐functionalized mesoporous MCM‐41 materials supporting indium and thallium (MCM‐41‐INA‐In and MCM‐41‐INA‐Tl) have been developed using a covalent grafting method. A surface functionalization method has been applied to prepare Cl‐modified mesoporous MCM‐41 material. Condensation of this Cl‐functionalized MCM‐41 with INA leads to the formation of MCM‐41‐INA. The reaction of MCM‐41‐INA with In(NO₃)₃ or Tl(NO₃)₃ leads to the formation of MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts. The resulting materials were characterized using various techniques. These MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts show excellent catalytic performance in the selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides. Finally, it is found that the anchored indium and thallium do not leach out from the surface of the mesoporous catalysts during reaction and the catalysts can be reused for seven repeat reaction runs without considerable loss of catalytic performance.     

Influence of the Synthesis pH on Sorption Behavior of Mesoporous MCM-41 for Toxic Metal Ions

Two samples of mesoporous MCM‐41 have been prepared in acidic and basic conditions with cetyltrimethylammonium bromide (CTAB) as template and characterized by powder X‐ray diffraction and N₂ adsorption‐desorption measurement to confirm the ordered mesoporous structure. Sorption of 21 toxic metal ions on these sorbents has been studied and discussed. The results show that distribution coefficient of Ba(II), Fe(III), Th(IV) on the synthesized MCM‐41 in basic condition and Cu(II), Pb(II), Zr(IV) on the synthesized MCM‐41 in acidic condition has been enhanced.     

Efficient Liquid‐Phase Oxidation of Diphenylmethane to Benzophenone over Vanadium‐Containing MCM‐41 Catalysts

The liquid‐phase oxidation of diphenylmethane with tert‐butylhydroperoxide has been studied using vanadium‐containing MCM‐41 materials, which were prepared by direct hydrothermal (V‐MCM‐41) and wet impregnation (V/MCM‐41) methods. These catalysts were characterized in detail by ICP‐AES, N₂‐sorption, XRD, FT‐IR, ²⁹Si and ⁵¹V NMR, TPD of ammonia, TPR of hydrogen, and chemisorption of oxygen. Both series of catalyst show good catalytic results, which are attributed to their highly ordered mesoporous structure, large BET surface area as well as the presence of easily accessible vanadium‐oxygen species as active centers in the catalyst. Further, V‐MCM‐41 exhibit superior catalytic activity (based on turnover number) than V/MCM‐41 mainly due to well‐dispersed tetrahedral vanadium‐oxygen species with higher oxidation ability. The effect of reaction parameters, i.e., temperature, time, solvent, etc. were investigated. Catalyst recycling test reveals good stability with only slight extent of leaching during the reaction.     

Photocatalytic Degradation of Imidacloprid by Phosphotungstic Acid Supported on a Mesoporous Sieve MCM‐41

Solid catalysts consisting of polyoxometalates (POM) namely phosphotungstic acid H₃PW₁₂O₄₀ (HPW) supported on a mesoporous sieve MCM‐41 have been prepared and characterized by FT‐IR, X‐ray diffraction, nitrogen adsorption and high resolution transmission electron microscope (HRTEM). The HPW/MCM‐41 with different HPW loadings from 10 to 60 wt% possess large specific surface area and rather uniform mesopores. Keggin structure of HPW retains on the prepared composite catalysts. The photocatalytic performance of HPW/MCM‐41 was examined by degradation of a durable pesticide imidacloprid. It is found that the prepared photocatalysts exhibit high activity under irradiation of 365 nm monochromatic light. For 50 mL of imidacloprid (10 mg/L), conversion of imidacloprid using 20 mg of HPW/MCM‐41 with 50 wt% loading level and calcined at 300°C reaches 58.0% after 5 h irradiation.     

Immobilization of cerium (IV) and erbium (III) in mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for the synthesis of 5‐substituted tetrazoles,and chemo‐ and homoselective oxidation of sulfides

Two well‐ordered 2D ‐ hexagonal cerium (IV) and erbium (III) embedded functionalized mesoporous MCM ‐ 41(MCM‐41@Serine/Ce and MCM ‐ 41@Serine/Er) have been developed via functionalization of mesoporous MCM ‐ 41. The surface modification method has been used in the preparation of serine‐grafted MCM ‐ 41 and led to the development of MCM‐41@Serine. The reaction of MCM‐41@Serine with Ce (NH₄)₂(NO₃)₆·2H₂O or ErCl₃·6H₂O in ethanol under reflux led to the organization of MCM‐41@Serine/Ce and MCM‐41@Serine/Er catalysts. The structures of these catalysts were determined using scanning electron microscopy, mapping, energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, thermogravimetric analysis, X‐ray diffraction, inductively coupled plasma, and Brunauer–Emmett–Teller analysis. These MCM‐41@Serine/Ce and MCM‐41@Serine/Er catalysts show outstanding catalytic performance in sulfides oxidation and synthesis of 5‐substituted tetrazoles. These catalysts can be recycled for seven repeated reaction runs without showing a considerable decrease in catalytic performance.     

Synthesis,Characterization and Catalysis of Ce‐MCM‐41

The cerium‐containing MCM‐41 (Ce‐MCM‐41) has been synthesized by direct hydrothermal method. The low‐angle XRD patterns revealed the typical five major peaks of MCM‐41 type hexagonal structures. The interplanar spacing d₁₀₀ = 38.4 Å was obtained that can be indexed on a hexagonal unit cell parameter with a_o = 44.3 Å which was larger than that of pure siliceous MCM‐41 (Si‐MCM‐41). Transmission electron micrograph shows the regular hexagonal array of uniform channel characteristics of MCM‐41. The BET surface area of Ce‐MCM‐41 was 840 m²/g, which is much reduced as compared to that of Si‐MCM‐41, with the pore size of 26.9 Å and mesopore volume of 0.78 cm³/g were measured by nitrogen adsorption‐desorption isotherm at 77 K. Along with the results, the synthesized Ce‐MCM‐41 exhibited a well‐ordered MCM‐41‐type mesoporous structure with the incorporation of cerium. Using Ce‐MCM‐41 as a support, the Rh (0.5 wt%) catalyst exhibited very high activity for the NO/CO reactions.     

Modified Mesoporous Silicate MCM-41 for Zinc Ion Adsorption: Synthesis, Characterization and Its Adsorption Behavior

Modified MCM‐41 has been prepared by bi‐functionalization of thiol and amino functional groups onto mesoporous silicate MCM‐41. Elemental analysis (EA), thermogravimetry analysis (TGA) and FTIR techniques were used to quantify the attachment of the thiol and amino functional groups to the mesoporous silicate pore wall. Powder X‐ray diffraction (PXRD) and nitrogen adsorption techniques were used to establish the pore diameter, packing of the pores and specific surface area of the modified mesoporous silicate MCM‐41. Adsorption behavior for 18 metal ions on this sorbent has been studied and discussed. This sorbent has high affinity for zinc ions against amino‐ or thiol‐functionalized MCM‐41 sorbents.     

Synthesis and Characterization of Amino-functionalized Meso-porous Silicate MCM-41 for Removal of Toxic Metal Ions

Amino-functionalized MCM-41 has been prepared by grafting amino containing functional groups onto mesoporous silicate MCM-41 and characterized by powder X-ray diffraction, N2 adsorption/desorption measurement, SEM, FT-IR, thermogravimetry and elemental analysis to confirm the ordered mesoporous structure and the functionalization of the amino groups. Sorption behavior for 18 metal ions on this sorbent has been studied and discussed.     

Biodegradable polyester/modified mesoporous silica composites for effective bone repair with self‐reinforced properties

A series novel composites based on poly(_L‐lactide) (PLLA) oligomer modified mesoporous silica (MCM41) homogeneous dispersed into poly(_L‐lactide‐co‐trimethylene carbonate‐co‐glycolide) (PLTG) terpolymer has been successfully prepared. The structure of PLTG terpolymer was characterized by ¹H NMR. The structure and properties of modified and unmodified MCM41 were attested by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analyzer (TGA), X‐ray diffraction (XRD), N₂ adsorption–desorption, scanning electron microscope (SEM), and transmission electron microscope (TEM), which demonstrated that the MCM41 was successfully grafted by the PLLA oligomer. The effect of different concentration of modified MCM41 in PLTG matrix on thermal properties, mechanical properties, and hydrophilicity was investigated by TGA, differential scanning calorimetry (DSC), mechanical testing, contact angle measurement, and SEM. The results of mechanical tests showed that 5 wt% of modified MCM41 nanoparticles gave rise to optimal reinforcing effect. The tensile strength, Young's modulus, and elongation at break of the PLTG/PLLA‐MCM41 (5%) composites were 33.2 Mpa, 1.58 Gpa, and 268.7%, respectively, which were all higher than the PLTG/MCM41 (5%) composites and pristine PLTG matrix, which were due to good interfacial adhesion between the PLTG matrix and MCM41 nanoparticles. TGA and DSC have shown that 5% modified MCM41 in the PLTG increased the temperature of composite degradation and T_g. Water contact angle measurement showed the hydrophilicity of the composites increases with the increase of modified MCM41 content. The live/dead assay showed that the modified MCM41 existing on the PLTG matrix presents very excellent cytocompatibility. Therefore, the novel composite material represents promising way for bone tissue engineering application.     

Synthesis and Catalytic Activity of Cu-Incorporated MCM-41 with Spheres-within-a-Sphere Hollow Structure

Cu-incorporated ordered hexagonal mesoporous silicates （Cu-MCM-41） with spheres-within-a-sphere hollow structure have been synthesized using thermoreversible polymer hydrogel methylcellulose （MC） and cationic surfactant as co-templates, which have been characterized by scanning electron micrograph （SEM）, X-ray diffraction （XRD）, transmission electron micrograph （TEM）, and N2 adsorption-desorption isotherms. The obtained results indicate that the morphology of Cu-incorporated MCM-41 materials is ＂spheres-within-a-sphere＂ hollow structure, which is very similar to that of the alveolus. In benzene hydroxylation with H2O2, the hollow spheres show much higher catalytic activity than particles of Cu-MCM-41.     

Cationic polymerization of cyclohexyl vinyl ether within MCM‐41 channels

Cationic polymerization of cyclohexyl vinyl ether (CHVE) within mesoporous, siliceous molecular sieves (MCM‐41) yields novel MCM‐41‐polyCHVE host‐guest hybrid materials. Initiation within the channel can be achieved by triphenylmethylium or bis(4‐methoxyphenyl)methylium silanolate ion pairs, as well as by mobile acidic silanols to a certain extent. Generation of the carbenium ions on MCM‐41 is investigated by a special UV/VIS technique. The structure of poly(vinyl ether) generated within the channels of MCM‐41 depends on the mechanism of initiation as shown by means of solid state ¹³C{¹H} and ²⁹Si{¹H} CP MAS NMR spectroscopy.     

A Direct and Rapid Route to Synthesize Pd/Si‐MCM‐41 at Room Temperature

The pure silica mesoporous molecular sieve MCM‐41 was synthesized under hydrothermal conditions. Pd/Si‐MCM‐41 was prepared by the incipient wetness impregnation of pure silica MCM‐41 with mixed solution of PdCl₂, ethanol and CH₂Cl₂. The samples were characterized by x‐ray diffraction (XRD), transmission electron microscopy (TEM), and nitrogen adsorption–desorption isotherms at 77 K. The XRD and TEM results reveal that Pd is actually anchored inside the pores of Si‐MCM‐41 and the Si‐MCM‐41 structure is clearly maintained after impregnation.     

Photovoltaic activity of Ti/MCM‐41

Ti/MCM‐41 is a well‐known heterogeneous catalyst for alkene epoxidation with organic peroxides. This titanosilicate contains isolated titanium atoms forming part of a framework of mesoporous silica whose structure is formed by parallel hexagonal channels 3.2 nm in diameter. The surface area and porosity of Ti/MCM‐41 are about 880 m² g^?1 and 0.70 cm³ g^?1, respectively. These values are among the highest for any material. Herein, we show that Ti/MCM‐41 exhibits photovoltaic activity. Dye‐sensitized solar cells using mesoporous Ti/MCM‐41 (2.8–5.7 % Ti content) as active layer, black dye N3 as photosensitizer and I₃^?/I^? in methoxyacetonitrile as electrolyte exhibit a V_OC, J_SC and FF of 0.44 V, 0.045 mA cm^?2 and 0.33, respectively. These values compare well against 0.75 V, 4.1 mA cm^?2 and 0.64, respectively, measured for analogous solar cells using conventional P‐25 TiO₂. However, the specific current density (J_SC/Ti atom) for the Ti/MCM‐41 is very similar to that of P25 TiO₂.     

Control of Wall Thickness and Extraordinarily High Hydrothermal Stability of Nanoporous MCM‐41 Silica

Wall thickness of siliceous MCM‐41 could be controlled systematically up to 36.1 Å. A reasonable model explaining formation of thicker MCM‐41 walls, not enlarging pore channel is proposed on the basis of TGA and ¹³C MAS NMR data of samples. Thermal restructuring process under mild basic condition favors the silica redeposition on silica wall and building up thicker wall. Most mesostructure of calcined MCM‐41 with thicker wall was retained even after hydrothermal treatment in boiling water for 14 days. To our best knowledge, the excellent hydrothermal stability of the MCM‐41 silica reported herein has not been described before and facilitates practical applications of mesoporous molecular sieves in future.     

Catalytic Performance and Dispersion Behavior of Supported Nano‐Amorphous Alloy NiB/MCM‐41 Catalysts Prepared by Chemical Reductive Deposition

Supported nano‐amorphous alloy NiB/MCM‐41 catalysts were prepared by chemical reductive deposition. The as‐prepared catalysts were characterized by XRD, SEM, TEM, EDAX, ICP, and N₂ adsorption‐desorption. The amorphous alloy structure of NiB active sites, mesoporous structure of catalysts, and higher BET area have been proved by the experiments. The catalysts have given excellent catalytic activity and selectivity in the production of 3‐(N‐benzyl)‐amino‐4‐methoxy‐ acetanilide from 3‐amino‐4‐methoxy‐acetanilide and benzaldehyde.     

An XPS study of microporous and mesoporous titanosilicates

In this contribution we report on an XPS study of microporous and mesoporous titanosilicates, in particular microporous titanium silicalite TS‐1, ordered mesoporous Ti‐MCM‐41 and [Ti]‐MCM‐41 and amorphous mesoporous silica–titania (MST) catalysts. Our aim was to obtain both photoemission and x‐ray‐excited Auger data for Ti species on these catalysts and use them in a Ti Wagner plot to rationalize the dependence of the local electronic structure on the atomic environment. Isolated Ti(IV) species coordinated to four and six oxygen anions and segregated TiO₂ clusters were detected on all catalysts by a curve‐fitting procedure of Ti 2p, O 1s and related peaks. The presence of the Si 2p peak excited by an O Kα ghost makes the detection of Ti LMM Auger transitions in mesoporous samples impossible due to the low Ti loadings and its homogeneous distribution in the silica matrix. Small TiO₂ clusters are eventually segregated within the mesopores of the catalysts and not at their external surface. On TS‐1 microporous catalysts with similar Ti loadings to the mesoporous catalysts we were able to detect Ti LMM Auger transitions, and by the Ti Wagner plot we clearly identify the presence of octahedrally coordinated Ti(IV) species. Thus, it is suggested that on TS‐1 the in‐framework (? O)₄Ti species are easily changed to (? O)₄(H₂O)₂Ti species by insertion of water molecules from the atmosphere. Small TiO₂ clusters (diameter <5 nm), eventually present on samples with Ti loading >2 wt.%, are segregated at their external surface and present spectroscopic features similar to (? O)₄(H₂O)₂Ti species. Copyright © 2004 John Wiley & Sons, Ltd.     

Enhancement of electrostatic charge dissipation properties of polymers by a sustained‐release effect of mesoporous silica nanoparticles

Small molecular surfactant (SMS), used as antistatic agent of polymers, is prone to the wash‐out effects thus reducing its lifetime. To address this issue, the sustained‐release antistatic agent is prepared by encapsulating SMS (HDC‐102 or HDC‐193) into mesoporous silica nanoparticles such as MCM‐41 and is used to modify the antistatic properties of polystyrene (PS). The water‐resistant test is used to evaluate the sustained‐release effect, and the results showed that the HDC‐102/MCM‐41/PS composite retains favorable antistatic properties with the R_s of 6.2 × 10¹¹ after five times washing, while the HDC‐102/PS loses antistatic properties after twice washing. The contact angle measurement demonstrates that the sustained‐release effect is affected by the characteristics of SMS. Moreover, the coefficient of thermal expansion of SMS/PS composites is decreased, and the thermal decomposition temperature is increased with incorporation of MCM‐41. This approach may be used in polymer systems with the other small molecular additives to prolong their lifetime. Copyright © 2015 John Wiley & Sons, Ltd.     

Syndiotactic polypropene with MCM‐41 supported metallocene [Me2C(Cp)(Flu)]ZrCl2

Mesoporous aluminosilicates – type MCM‐41 – were used as carriers for syndiospecific propene polymerisation using [Me₂C(Cp)(Flu)]ZrCl₂/MAO as catalyst. Alumina‐free mesoporous MCM‐41 reveals a far greater polymerisation activity than the analogous carrier containing alumina. The use of MCM‐41 as carrier material at low propene concentration and high polymerisation temperature produces syndiotactic polypropene (sPP) with higher syndiotacticity and higher melting points than achieved when using a homogenous system or a supported system based on spherical SiO₂.     

Synthesis and Characterization of Ordered Mesoporous Aluminosilicate Molecular Sieves with High Stability in High-Temperature Steam

The ordered mesoporous aluminosilicate molecular sieve （MASMS-1） stable in the high-temperature steam has been successfully synthesized from the assembly of diluted ZSM-5-type precursor with mesoporous MCM-41. The material was characterized by XRD, N2 adsorption-desorption, FE-SEM, TEM, FT-IR spectroscopy and 27A1 MAS NMR techniques. This mesoporous material shows high stability in the high-temperature steam [H2O （φ=20%） in N2 at 800 ℃ for 4 h], which might be ascribed to the synergistic effect of both thick walls containing zeolite-like five-membered ring subunits and highly condensed surface silanol groups.