Electronically driven structural distortions in lithium intercalates of the n = 2 Ruddlesden-Popper-type host Y2Ti2O5S2: synthesis, structure, and properties of LixY2Ti2O5S2 (0 < x < 2)

Lithium intercalation into the oxide slabs of the cation-deficient n = 2 Ruddlesden-Popper oxysulfide Y(2)Ti(2)O(5)S(2) to produce Li(x)Y(2)Ti(2)O(5)S(2) (0 < x < 2) is described. Neutron powder diffraction measurements reveal that at low levels of lithium intercalation into Y(2)Ti(2)O(5)S(2), the tetragonal symmetry of the host is retained: Li(0.30(5))Y(2)Ti(2)O(5)S(2), I4/mmm, a = 3.80002(2) A, c = 22.6396(2) A, Z = 2. The lithium ion occupies a site coordinated by four oxide ions in an approximately square planar geometry in the perovskite-like oxide slabs of the structure. At higher levels of lithium intercalation, the symmetry of the cell is lowered to orthorhombic: Li(0.99(5))Y(2)Ti(2)O(5)S(2), Immm, a = 3.82697(3) A, b = 3.91378(3) A, c = 22.2718(2) A, Z = 2, with ordering of Li(+) ions over two inequivalent sites. At still higher levels of lithium intercalation, tetragonal symmetry is regained: Li(1.52(5))Y(2)Ti(2)O(5)S(2), I4/mmm, a = 3.91443(4) A, c = 22.0669(3) A, Z = 2. A phase gap exists close to the transition from the tetragonal to orthorhombic structures (0.6 < x < 0.8). The changes in symmetry of the system with electron count may be considered analogous to a cooperative electronically driven Jahn-Teller type distortion. Magnetic susceptibility and resistivity measurements are consistent with metallic properties for x > 1, and the two-phase region is identified as coincident with an insulator to metal transition.     

Cation deficient layered Ruddlesden-Popper-related oxysulfides La2LnMS2O5 (Ln=La, Y; M=Nb, Ta)

The structures of the new oxysulfide Ruddlesden-Popper phases La2LnMS2O5 (Ln=La, Y; M=Nb, Ta) are reported together with an iodide-containing variant: La3-xNb1+xS2O5I2x (0相似文献   

Oxysulfide Sm(2)Ti(2)S(2)O(5) as a stable photocatalyst for water oxidation and reduction under visible light irradiation (lambda < or = 650 nm)

A Ti-based oxysulfide, Sm(2)Ti(2)S(2)O(5), was studied as a visible light-driven photocatalyst. Under visible light (440 nm < or = lambda < or = 650 nm) irradiation, Sm(2)Ti(2)S(2)O(5) with a band gap of approximately 2 eV evolved H(2) or O(2) from aqueous solutions containing a sacrificial electron donor (Na(2)S-Na(2)SO(3) or methanol) or acceptor (Ag(+)) without any noticeable degradation. This oxysulfide is, therefore, a stable photocatalyst with strong reduction and oxidation abilities under visible-light irradiation. The electronic band structure of Sm(2)Ti(2)S(2)O(5) was calculated using the plane-wave-based density functional theory (DFT) program. It was elucidated that the S3p orbitals constitute the upper part of the valence band and these orbitals make an essential contribution to the small band gap energy. The conduction and valence bands' positions of Sm(2)Ti(2)S(2)O(5) were also determined by electrochemical measurements. It indicated that conduction and valence bands were found to have satisfactory potentials for the reduction of H(+) to H(2) and the oxidation of H(2)O to O(2) at pH = 8. This is consistent with the results of the photocatalytic reactions.     

Na5(In4S)(InS4)3.6H2O, a zeolite-like structure with unusual SIn4 tetrahedra

A hydrated sodium indium sulfide, Na5(In4S)(InS4)3.6H2O, has been prepared by hydrothermal synthesis. This material contains a tetrahedral sulfur site coordinated to four trivalent indium ions, an unusual bonding pattern not previously observed in open framework chalcogenides. The structure is related to the perovskite (CaTiO3) type with simultaneous substitutions of Ti by SIn4, O by InS4, and Ca2+ by [Na5(H2O)6]5+. It is a wide-gap semiconductor and shows photocatalytic activity under UV light for hydrogen generation from aqueous solution without use of any cocatalyst.     

Structure of V(2)O(5)*nH(2)O xerogel solved by the atomic pair distribution function technique

A long-standing issue regarding the local and long-range structure of V(2)O(5)*nH(2)O xerogel has been successfully addressed. The full three-dimensional structure of the lamellar turbostratic V(2)O(5)*nH(2)O xerogel was determined by the atomic pair distribution function technique. We show that on the atomic scale the slabs of the xerogel can be described well as almost perfect pairs (i.e., bilayers) of single V(2)O(5) layers made of square pyramidal VO(5) units. These slabs are separated by water molecules and stack along the z-axis of a monoclinic unit cell (space group C2/m) with parameters a = 11.722(3) A, b = 3.570(3) A, c = 11.520(3) A, and beta = 88.65 degrees. The stacking sequence shows signatures of turbostratic disorder and a structural coherence limited to 50 A.     

Synthesis and magnetic and transport properties of Sr6V9S22O2: "AM2S5" phases revisited

The compound Sr6V9S22O2 was prepared from SrS, sulfur, vanadium metal, and V2O5 at 950 degrees C in an evacuated quartz tube. The compound is rhombohedral, R3, with a = 8.7538(6) A, c = 34.934(3) A, and Z = 3, and shows strong preferred orientation in its XRD profiles (00l) due to the layered nature of the structure. The compound contains charged CdI2 type VS2 layers of formula [V7S14]4- separated by [Sr6(VOS3)2(S2)]4+ layers. The latter has VOS3(3-) tetrahedra and S2(2-) disulfide units linked by Sr2+ ions. Magnetic susceptibility and four-probe resistivity studies show essentially temperature-independent paramagnetism above 80 K and small gap semiconductor behavior, respectively. The compound has a positive Hall coefficient at room temperature. The relationship among Sr6V9S22O2, "SrV2S5" (J. Solid State Chem. 1996, 126, 189), and other AM2S5 phases is discussed.     

Two new structurally related strontium gallium nitrides: Sr4GaN3O and Sr4GaN3(CN2)

The strontium gallium oxynitride Sr(4)GaN(3)O and nitride-carbodiimide Sr(4)GaN(3)(CN(2)) are reported, synthesized as single crystals from molten sodium at 900 degrees C. Red Sr(4)GaN(3)O crystallizes in space group Pbca (No. 61) with a = 7.4002(1) Angstroms, b = 24.3378(5) Angstroms, c = 7.4038(1) Angstroms, and Z = 8, as determined from single-crystal X-ray diffraction measurements at 150 K. The structure may be viewed as consisting of slabs [Sr(4)GaN(3)](2+) containing double layers of isolated [GaN(3)](6-) triangular anions arranged in a "herringbone" fashion, and these slabs are separated by O(2-) anions. Brown Sr(4)GaN(3)(CN(2)) has a closely related structure in which the oxide anions in the Sr(4)GaN(3)O structure are replaced by almost linear carbodiimide [CN(2)](2-) anions [Sr(4)GaN(3)(CN(2)): space group P2(1)/c (No. 14), a = 13.4778(2) Angstroms, b = 7.4140(1) Angstroms, c = 7.4440(1) Angstroms, beta = 98.233(1) degrees, and Z = 4].     

Synthesis and structure determination of the new Sm2Ti2O5S2 compound

Sm₂Ti₂O₅S₂ was obtained in an attempt to prepare an oxysulfide of samarium and titanium in a way similar to the obtention of the quaternary Sm₃NbO₄Se₃ compound. The structure was determined by single-crystal X-ray diffraction. The following crystal data were obtained: M_r = 540.6 g mol⁻¹, tetragonal symmetry with unit cell parameters a = 3.819(1) A, c = 22.964(5) A, space group I4/mmm (139). Refinement for 127 unique reflections with I > 3σ(1), and 11 variables, converged to the reliability factor R = 1.77 %. The structure can be described as a stacking, along the c-direction, of [Sm₂S₂] slabs of a rock-salt type (two-atom-thick-layers) separated by a 2D network of corner-sharing octahedra [= Ti₂O₅] of a ReO₃ structure type.     

New strontium polysulfides, SrS3, and Sr2(OH)2S4.10H2O, obtained by the high-pressure treatment of a Sr-S mixture

A new polymorph of SrS(3) was obtained by a reaction of SrS and S with an atomic ratio of Sr:S = 1:5 under a pressure of 5 GPa at 1200 degrees C. It crystallized in a tetragonal unit cell with a = 6.708(1) A, c = 3.942(1) A, and V = 177.36(6) A(3). It was isotypic with BaS(3), and contained S3(2-) polysulfide ions. The product obtained from the high-pressure synthesis contained an amorphous component. It was highly deliquescent and formed a yellowish solution. A new layered polysulfide, Sr(2)(OH)(2)S(4).10H(2)O, crystallized in the solution. The sulfide belonged to a triclinic space group of P (No. 2) with lattice constants of a = 5.9107(5) A, b = 7.8682(6) A, c = 9.4134(6) A, alpha = 75.639(6) degrees, beta = 73.824(3) degrees, gamma = 71.639(3) degrees, V = 392.83(5) A(3), and Z = 1. Each Sr ion was coordinated with one OH ligand and eight H(2)O ligands. Six H(2)O ligands out of the eight were bridging ligands to form two-dimensional [Sr(2)(OH)(2)(H(2)O)(10)(2+)]( infinity ) cationic layers, between which S4(2-) tetrapolysulfide ions were situated. The S4(2-) anion had a coplanar configuration with a dihedral angle of 180.0 degrees. The stability of S4(2-) anions having different conformations was discussed from a viewpoint of ab initio MO calculations on changing the dihedral angles of S4(2-).     

A novel layered oxysulfide intergrowth compound Sr4Mn2Cu5O4S5 containing a fragment of the alpha-Cu2S antifluorite structure

Sr4Mn2Cu5O4S5 contains manganese oxide sheets separated by unusual antifluorite-type Cu3S3 layers in which copper(I) ions are distributed over three- and four-coordinates sites in a similar fashion to in alpha-Cu2-xS and suggestive of high two-dimensional copper ion mobility.     

Synthesis, Spectroscopic Characterization, and Structural Studies of Bis(&mgr;-sulfido)bis[{O,O-dialkyl (alkylene) dithiophosphato}oxomolybdenum(V)] Complexes. Crystal Structures of Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2), Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2).2NC(5)H(5), and Mo(2)O(3)[S(2)P(OPh)(2)](4)

A series of new complexes, Mo(2)O(2)S(2)[S(2)P(OR)(2)](2) (where R = Et, n-Pr, i-Pr) and Mo(2)O(2)S(2)[S(2)POGO](2) (where G = -CH(2)CMe(2)CH(2)-, -CMe(2)CMe(2)-) have been prepared by the dropwise addition of an ethanolic solution of the ammonium or sodium salt of the appropriate O,O-dialkyl or -alkylene dithiophosphoric acid, or the acid itself, to a hot aqueous solution of molybdenum(V) pentachloride. The complexes were also formed by heating solutions of Mo(2)O(3)[S(2)P(OR)(2)](4) or Mo(2)O(3)[S(2)POGO](4) species in glacial acetic acid. The Mo(2)O(2)S(2)[S(2)P(OR)(2)](2) and Mo(2)O(2)S(2)[S(2)POGO](2) compounds were characterized by elemental analyses, (1)H, (13)C, and (31)P NMR, and infrared and Raman spectroscopy, as were the 1:2 adducts formed on reaction with pyridine. The crystal structures of Mo(2)O(2)S(2)[S(2)P(OEt(2))](2), Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2).2NC(5)H(5), and Mo(2)O(3)[S(2)P(OPh)(2)](4) were determined. Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2) (1) crystallizes in space group C2/c, No. 15, with cell parameters a = 15.644(3) ?, b = 8.339(2) ?, c = 18.269(4) ?, beta = 103.70(2) degrees, V = 2315.4(8) ?(3), Z = 4, R = 0.0439, and R(w) = 0.0353. Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2).2NC(5)H(5) (6) crystallizes in space group P&onemacr;, No. 2, with the cell parameters a = 12.663(4) ?,b = 14.291(5) ?, c = 9.349(3) ?, alpha = 100.04(3) degrees, beta = 100.67(3) degrees, gamma = 73.03(3) degrees V = 1557(1) ?(3), Z = 2, R = 0.0593, and R(w) = 0.0535. Mo(2)O(3)[S(2)P(OPh)(2)](4) (8) crystallizes in space group P2(1)/n, No. 14, with cell parameters a = 15.206(2)?, b = 10.655(3)?, c = 19.406(3)?, beta = 111.67(1) degrees, V = 2921(1)?(3), Z = 2, R = 0.0518, R(w) = 0.0425. The immediate environment about the molybdenum atoms in 1 is essentially square pyramidal if the Mo-Mo interaction is ignored. The vacant positions in the square pyramids are occupied by two pyridine molecules in 6, resulting in an octahedral environment with very long Mo-N bonds. The terminal oxygen atoms in both 1 and 6 are in the syn conformation. In 8, which also has a distorted octahedral environment about molybdenum, two of the dithiophosphate groups are bidentate as in 1 and 6, but the two others have one normal Mo-S bond and one unusually long Mo-S bond.     

Reversible cation/anion extraction from K2La2Ti3O10: formation of new layered titanates, KLa2Ti3O9.5 and La2Ti3O9

A new soft-chemical transformation of layered perovskite oxides is described wherein K2O is sequentially extracted from the Ruddlesden-Popper (R-P) phase, K2La2Ti3O10 (I), yielding novel anion-deficient KLa2Ti3O(9.5) (II) and La2Ti3O9 (III). The transformation occurs in topochemical reactions of the R-P phase I with PPh4Br and PBu4Br (Ph = phenyl; Bu = n-butyl). The mechanism involves the elimination of KBr accompanied by decomposition of PR4+ (R = phenyl or n-butyl) that extracts oxygen from the titanate. Analysis of the organic products of decomposition reveals formation of Ph3PO, Ph3P, and Ph-Ph for R = phenyl, and Bu3PO, Bu3P along with butane, butene, and octane for R = butyl. The inorganic oxides II and III crystallize in tetragonal structures (II: P4/mmm, a = 3.8335(1) A, c = 14.334(1) A; III: I4/mmm, a = 3.8565(2) A, c = 24.645(2) A) that are related to the parent R-P phase. II is isotypic with the Dion-Jacobson phase, RbSr2Nb3O10, while III is a unique layered oxide consisting of charge-neutral La2Ti3O9 anion-deficient perovskite sheets stacked one over the other without interlayer cations. Interestingly, both II and III convert back to the parent R-P phase in a reaction with KNO3. While transformations of the R-P phases to other related layered/three-dimensional perovskite oxides in ion-exchange/metathesis/dehydration/reduction reactions are known, the simultaneous and reversible extraction of both cations and anions in the conversions K2La2Ti3O10 right harpoon over left harpoon KLa2Ti3O9.5 right harpoon over left harpoon La2Ti3O9 is reported here for the first time.     

Synthetic architectures of TiO2/H2Ti5O11.H2O, ZnO/H2Ti5O11.H2O, ZnO/TiO2/H2Ti5O11.H2O, and ZnO/TiO2 nanocomposites

Although synthetic investigations of inorganic nanomaterials had been carried out extensively over the past decade, few of them have been devoted to fabrication of complex nanostructures that comprise multicomponents/phases (i.e., composite nanobuilding blocks), especially in the area of structural/morphological architecture. In this work, nanobelts of a protonated pentatitanate (H(2)Ti(5)O(11).H(2)O) were synthesized hydrothermally for the first time. Two technologically important transition-metal-oxides TiO(2) and ZnO were then grown respectively or sequentially onto the surface of the as-prepared nanobelts in aqueous mediums. With a main emphasis on organizational manipulation, the present investigation examines general issues of morphological complexity, synthetic interconvertibility, and material combinability related to fabrication of inorganic nanocomposites. Using this model material system, we demonstrate that complex binary and tertiary composite building blocks of TiO(2)/H(2)Ti(5)O(11).H(2)O, ZnO/H(2)Ti(5)O(11).H(2)O, ZnO/TiO(2)/H(2)Ti(5)O(11).H(2)O, and ZnO/TiO(2) can be architected stepwise in solution. Structural features of these nanocomposites have also been addressed.     

Terminal titanium-ligand multiple bonds. Cleavages of C=O and C=S double bonds with Ti imido complexes

Treatment of (t-)BuN=TiCl(2)Py(3) with 2 equiv lithium ketiminate compound, Li[OCMeCHCMeN(Ar)] (where Ar = 2,6-diisopropylphenyl), in toluene at room temperature gave (t-)BuN=Ti[OCMeCHCMeN(Ar)](2) (1) in high yield. The reaction of 1 with phenyl isocyanate at room-temperature resulted in imido ligand exchange producing PhN=Ti[OCMeCHCMeN(Ar)](2) (2). Compound 1 decomposed at 90 degrees C to form a terminal titanium oxo compound O=Ti[OCMeCHCMeN(Ar)](2) (3) and (t-)BuNHCMeCHCMeNAr (4). Also, the compound 3 could be obtained by reacting 1 with CO(2) under mild condition. Similarly, while 1 reacts with an excess of carbon disulfide, a novel terminal titanium sulfido compound S=Ti[OCMeCHCMeN(Ar)](2) (5) was formed via a C=S bond breaking reaction. A novel titanium isocyanate compound Ti[OCMeCHCMeN(Ar)](2)(NCO)(OEt) (6) was formed on heating 1 with 1 equiv of urethane, H(2)NCOOEt. Compounds 1-6 have been characterized by (1)H and (13)C NMR spectroscopies. The molecular structures of 1, 3, 5, and 6 were determined by single-crystal X-ray diffraction. A theoretical calculation predicted that the cleavage of the C-S double bonds for carbon disulfide with the Ti=N bond of compound 1 was estimated at ca. 21.8 kcal.mol(-1) exothermic.     

Small gas-phase dianions of Zn3O(4)(2-), Zn4O(5)(2-), CuZn2O(4)(2-), Si2GeO(6)(2-), Ti2O(5)(2-) and Ti3O(7)(2-)

We have searched for new species of small oxygen-containing gas-phase dianions produced in a secondary ion mass spectrometer by Cs+ ion bombardment of solid samples with simultaneous exposure of their surfaces to O2 gas. The targets were a pure zinc metal foil, a copper-contaminated zinc-based coin, two silicon-germanium samples (Si(1-x)Ge(x)(with x= 6.5% or 27%)) and a piece of titanium metal. The novel dianions Zn3O(4)(2-), Zn4O(5)(2-), CuZn2O(4)(2-), Si2GeO(6)(2-), Ti2O(5)(2-) and Ti3O(7)(2-) have been observed at half-integer m/z values in the negative ion mass spectra. The heptamer dianions Zn3O(4)(2-) and Ti2O(5)(2-) have been unambiguously identified by their isotopic abundances. Their flight times through the mass spectrometer are approximately 20 micros and approximately 17 micros, respectively. The geometrical structures of the two heptamer dianions Ti2O(5)(2-), and Zn3O(4)(2-) are investigated using ab initio methods, and the identified isomers are compared to those of the novel Ge2O(5)(2-) and the known Si2O(5)(2-) and Be3O(4)(2-) dianions.     

N4H9Cu7S4: a hydrazinium-based salt with a layered Cu7S4- framework

Crystals of a hydrazinium-based copper(I) sulfide salt, N4H9Cu7S4 (1), have been isolated by an ambient temperature solution-based process. In contrast to previously reported hydrazinium salts of main-group metal chalcogenides, which consist of isolated metal chalcogenide anions, and ACu7S4 (A = NH4+, Rb+, Tl+, K+), which contains a more three-dimensional Cu7S4- framework with partial Cu-site occupancy, the structure of 1 [P21, a = 6.8621(4) A, b = 7.9851(4) A, c = 10.0983(5) A, beta = 99.360(1) degrees , Z = 2] is composed of extended two-dimensional Cu7S4- slabs with full Cu-site occupancy. The Cu7S4- slabs are separated by a mixture of hydrazinium and hydrazine moieties. Thermal decomposition of 1 into copper(I) sulfide proceeds at a significantly lower temperature than that observed for analogous hydrazinium salts of previously considered metal chalcogenides, completing the transition at temperatures as low as 120 degrees C. Solutions of 1 may be used in the solution deposition of a range of Cu-containing chalcogenide films.     

多孔炭模板法制备Li4Ti5O12及其嵌锂行为

采用水合氧化钛溶胶为原料, 多孔炭为模板剂, 设计制备了一种新型准纳米晶锂钛复合氧化物, 并用SEM、XRD、恒流充放电及交流阻抗测试表征了材料的形貌、结构和电化学性能. 结果表明, 该氧化物晶粒尺寸约200 nm, 为典型的尖晶石Li4Ti5O12结构. 在0.5C(1C=0.2 mA·cm-2)电流条件下的首次嵌脱锂效率为99.8%, 嵌脱锂电位平坦, 可逆容量为117 mAh·g-1; 当电流从0.5C增至5C时, 其可逆嵌锂容量仍在100 mAh·g-1以上, 容量保持率大于86%, 倍率充放电性能优异. 交流阻抗测试结果表明, 模板剂多孔炭的应用使合成的尖晶石Li4Ti5O12具有更佳的导电性能, 且多孔特征明显.     

Atom transfer reactions of (TTP)Ti(eta 2-3-hexyne): synthesis and molecular structure of trans-(TTP)Ti[OP(Oct)3]2

Atom and group transfer reactions were found to occur between heterocumulenes and (TTP)Ti(eta 2-3-hexyne), 1 (TTP = meso-5,10,15,20-tetra-p-tolylporphyrinato dianion). The imido derivatives (TTP)Ti=NR (R = iPr, 2; tBu, 3) were produced upon treatment of complex 1 with iPrN=C=NiPr, iPrNCO, or tBuNCO. Reactions between complex 1 and CS2, tBuNCS, or tBuNCSe afforded the chalcogenido complexes, (TTP)Ti=Ch (Ch = Se, 4; S, 5). Treatment of complex 1 with 2 equiv of PEt3 yielded the bis(phosphine) complex, (TTP)Ti(PEt3)2, 6. Although (TTP)Ti(eta 2-3-hexyne) readily abstracts oxygen from epoxides and sulfoxides, the reaction between 1 and O=P(Oct)3 did not result in oxygen atom transfer. Instead, the paramagnetic titanium(II) derivative (TTP)Ti[O=P(Oct)3]2, 7, was formed. The molecular structure of complex 7 was determined by single-crystal X-ray diffraction: Ti-O distance 2.080(2) A and Ti-O-P angle of 138.43(10) degrees. Estimates of Ti=O, Ti=S, Ti=Se, and Ti=NR bond strengths are discussed.     

Preparation, crystal structure, and thermal stability of the cadmium sulfide nanoclusters Cd6S44+ and Cd2Na2S4+in the sodalite cavities of zeolite A (LTA)

The crystal structure and thermal stability of two cadmium sulfide nanoclusters prepared in zeolite A (LTA) have been studied by XPS, TGA, and single-crystal and powder XRD. The crystal structures of Cd2.4Na3.2(Cd6S4)0.4(Cd2Na2S)0.6(H2O)> or =5.8[Si12Al12O48]-LTA (a = 12.2919(7) A, crystal 1 (hydrated)) and /Cd4Na2(Cd2O)(Na2O)/[Si12Al12O48]-LTA (a = 12.2617(4) A, crystal 2 (dehydrated)) were determined by single-crystal methods in the cubic space group Pm3m at 294(1) K. Crystal 1 was prepared by ion exchange of Na12-LTA in an aqueous stream 0.05 M in Cd2+, followed by washing in a stream of water, followed by reaction in an aqueous stream 0.05 M in Na2S. Crystal 2 was made by dehydrating crystal 1 at 623 K and 1 x 10(-6) Torr for 3 days. In crystal 1, Cd6S4(4+) nanoclusters were found in and extending out of about 40% of the sodalite cavities. Central to each Cd6S4(4+) cluster is a Cd4S4 unit (interpenetrating Cd2+ and S2- tetrahedra with near Td symmetry, Cd-S = 2.997(24) A, Cd-S-Cd = 113.8(12) degrees, and S-Cd-S = 58.1(24) degrees). Each of the two remaining Cd2+ ions bonds radially through a 6-ring of the zeolite framework to a sulfide ion of this Cd4S4 unit (Cd-S = 2.90(8) A). In each of the remaining 60% of the sodalite cavities of crystal 1, a planar Cd2Na2S4+ cluster was found (Cd-S/Na-S = 2.35(5)/2.56(14) A and Cd-S-Cd/Na-S-Na = 122(5)/92(7) degrees). Cd6S4(4+) and Cd2Na2S4+ are stable within the zeolite up to about 700 K in air. Upon vacuum dehydration at 623 K, all sulfur was lost (crystal 2). Instead as anions, only two oxide ions remain per sodalite unit. One bridges between two Cd2+ ions (Cd2O2+, Cd-O = 2.28(3) A) and the other between two Na+ ions (Na2O, Na-O = 2.21(10) A).     

Covalent metal-organic networks: pyridines induce 2-dimensional oligomerization of (mu-OC6H4O)2Mpy2 (M = Ti, V, Zr)

Treatment of M(OiPr)4 (M = Ti, V) and [Zr(OEt)4]4 with excess 1,4-HOC6H4OH in THF afforded [M(OC6H4O)a(OC6H4OH)3.34-1.83a(OiPr)0.66-0.17a(THF)0.2]n (M = Ti, 1-Ti; V, 1-V, 0.91 < or = a < or = 1.82) and [Zr(1,4-OC6H4O)2-x(OEt)2x]n (1-Zr, x = 0.9). The combination of of 1-M (M = Ti, V, Zr) or M(OiPr)4 (M = Ti, V), excess 1,4- or 1,3-HOC6H4OH, and pyridine or 4-phenylpyridine at 100 degrees C for 1 d to 2 weeks afforded various 2-dimensional covalent metal-organic networks: [cis-M(mu 1,4-OC6H4O)2py2] infinity (2-M, M = Ti, Zr), [trans-M(mu 1,4-OC6H4O)2py2.py] infinity (3-M, M = Ti, V), solid solutions [trans-TixV1-x(mu 1,4-OC6H4O)2py2.py] infinity (3-TixV1-x, x approximately 0.4, 0.6, 0.9), [trans-M(mu 1,4-OC6H4O)2(4-Ph-py)2] infinity (4-M, M = Ti, V), [trans-Ti(mu 1,3-OC6H4O)2py2] infinity (5-Ti), and [trans-Ti(mu 1,3-OC6H4O)2(4-Ph-py)2] infinity (6-Ti). Single-crystal X-ray diffraction experiments confirmed the pleated sheet structure of 2-Ti, the flat sheet structure of 3-Ti, and the rippled sheet structures of 4-Ti, 5-Ti, and 6-Ti. Through protolytic quenching studies and by correspondence of powder XRD patterns with known titanium species, the remaining complexes were structurally assigned. With py or 4-Ph-py present, aggregation of titanium centers is disrupted, relegating the building block to the cis- or trans-(ArO)4Tipy2 core. The sheet structure types are determined by the size of the metal and the interpenetration of the layers, which occurs primarily through the pyridine residues and inhibits intercalation chemistry.