High-efficiency organic light-emitting diodes (OLEDs) with a mixed layer structure

Improved performance of organic light-emitting diodes (OLEDs) as obtained by a mixed layer was investigated. The OLEDs with a mixed layer which were composed of N,N′-diphenyl-N,N′-bis(1-napthyl-phenyl)-1,1′-biphenyl-4,4′-diamine (NPB), tris-(8-hydroxyquinolato) aluminum (Alq₃) and 4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB) showed the highest brightness and efficiency, which reached 19048 cd/m² at 17 V and 4.3 cd/A at 10 mA/cm², respectively. The turn-on voltage of the device is 2.6 V. Its Commission Internationale del’Eclairage (CIE) coordinate is (0.497, 0.456) at 17 V, and the CIE coordinates of the device are largely insensitive to the driving voltages, which depicts stabilized yellow color.     

Synthesis and electroluminescent characterization of a symmetric starburst orange-red light material

A new symmetric starburst orange-red light material, tris(4-(2-(N-butyl-1,8-naphthalimide)ethynyl)phenyl)amine (TNGT), was designed and synthesized. It shows a high fluorescence quantum yield and a slight concentration-quenching effect. A high brightness (6600 cd/m²) and a high current efficiency [4.57 cd/A (at 420 cd/m²)] with CIE (0.59, 0.40) were achieved at a relatively high doping concentration (20 wt%) in a TNGT-based OLED.     

An organic electroluminescent device made from a gadolinium complex

A gadolinium ternary complex, tris(1-phenyl-3-methyl-4-isobutyryl-5-pyrazolone) (phenanthroline) gadolinium [Gd(PMIP)₃(Phen)] was synthesized and used as a light emitting material in the organic electroluminescent (EL) devices. The triple layer device with a structure of indium tin oxide (ITO)/N,N′-diphenyl-N,N′-bis(3-methylphenyl)-1,1′-biphenyl-4,4′-diamine (TPD) (20 nm)/Gd(PMIP)₃(Phen) (80 nm)/2, 9-dimethyl-4, 7-diphenyl-1, 10-phenanthroline (bathocuproine or BCP) (20 nm)/Mg: Ag(200 nm)/Ag(100 nm) exhibited green emission peaking at 535 nm. A maximum luminance of 230 cd/m² at 17 V and a peak power efficiency of 0.02 lm/w at 9 V were obtained.     

Solution-processed white organic light-emitting diodes with mixed-host structures

Efficient white light-emitting diodes (WOLEDs) were fabricated with a solution-processed single emission layer composed of a molecular and polymeric material mixed-host (MH). The main host used was a blue-emitting molecular material of 4,4′-bis(2,2′-diphenylvinyl)-1,1′-biphenyl (DPVBi) and the assisting host used was a hole-transport-type polymer of poly(9-vinylcarbazole) (PVK). By co-doping 4,4′-bis[2-(4-(N,N-diphenylamino)phenyl)vinyl]biphenyl and 5,6,11,12-tetraphenylnaphacene into the MH, the performances of the fabricated devices made with different mixing ratio of host materials were investigated, and were to depend on the mixing ratios. Under the optimal PVK:DPVBi ratio (3:7), we achieved a maximum luminance of 14 110 cd/m² and a maximum current efficiency of 9.5 cd/A. These improvements were attributed to the MH structure, which effectively improved the thermal stability of spin-coated film and enhanced the hole-injection/transporting properties of WOLEDs.     

Highly efficient flexible organic light-emitting devices utilizing F4-TCNQ/m-MTDATA multiple quantum well structures

Flexible organic light-emitting devices (FOLEDs) based on multiple quantum well (MQW) structures, which consist of alternate layers of 2,3,5,6-Tetrafluoro-7,7,8,8,-tetracyano-quinodimethane (F4-TCNQ) and 4,4′,4″-tris-(3-methylphenylphe-nylamino)tripheny-lamine (m-MTDATA) have been fabricated. The Alq₃-based device with double quantum well (DQW) structure exhibits the remarkable electroluminescent (EL) performances for the brightness of 23,500 cd/m² at 14 V and the maximum current efficiency of 7.0 cd/A at 300.3 mA/cm², respectively, which are greatly improved by 114% and 56% compared with the brightness of 10,958 cd/m² at 14 V and the maximum current efficiency of 4.5 cd/A at 174.0 mA/cm² for the conventional device without MQW structures. These results demonstrate that the EL performances of FOLEDs could be greatly improved by utilizing the novel MQW structures, and the reason for this improvement has also been explained by the effect of interfacial dipole and interfacial doping between F4-TCNQ and m-MTDATA in this article.     

Red organic light-emitting diodes with high efficiency,low driving voltage and saturated red color realized via two step energy transfer based on ADN and Alq3 co-host system

We demonstrated efficient red organic light-emitting diodes based on a wide band gap material 9,10-bis(2-naphthyl)anthracene (ADN) doped with 4-(dicyano-methylene)-2-t-butyle-6-(1,1,7,7-tetramethyl-julolidyl-9-enyl)-4H-pyran (DCJTB) as a red dopant and 2,3,6,7-tetrahydro-1,1,7,7,-tetramethyl-1H,5H,11H-10(2-benzothiazolyl)quinolizine-[9,9a,1gh]coumarin (C545T) as an assistant dopant. The typical device structure was glass substrate/ITO/4,4′,4″-tris(N-3-methylphenyl-N-phenyl-amino)triphenylamine (m-MTDATA)/N,N′-bis(naphthalene-1-yl)-N,N′-diphenyl-benzidine (NPB)/[ADN:Alq₃]:DCJTB:C545T/Alq₃/LiF/Al. It was found that C545T dopant did not by itself emit but did assist the energy transfer from the host (ADN) to the red emitting dopant via cascade energy transfer mechanism. The OLEDs realized by this approach significantly improved the EL efficiency. We achieved a significant improvement regarding saturated red color when a polar co-host emitter (Alq₃) was incorporated in the matrix of [ADN:Alq₃]. Since ADN possesses a considerable high electron mobility of 3.1 × 10⁻⁴ cm²  V⁻¹ s⁻¹, co-host devices with high concentration of ADN (>70%) exhibited low driving voltage and high current efficiency as compared to the devices without ADN. We obtained a device with a current efficiency of 3.6 cd/A, Commission International d’Eclairage coordinates of [0.618, 0.373] and peak λ_max = 620 nm at a current density of 20 mA/cm². This is a promising way of utilizing wide band gap material as the host to make red OLEDs, which will be useful in improving the electroluminescent performance of devices and simplifying the process of fabricating full color OLEDs.     

Tetraalkoxylated-PPV derivative: An efficient and pure green electroluminescent polymer with good solution processability

A new solution-processable tetraalkoxy-substituted poly(1,4-phenylenevinylene) derivative, poly{[2-(3′,7′-dimethyloctyloxy)-3,5,6-trimethoxy]-1,4-phenylenevinylene} (TALK-PPV), was synthesized through a dehydrohalogenation polymerization route, and its light-emitting properties were investigated. The TALK-PPV showed highly blue-shifted UV–visible absorption and PL emission spectra compared to the dialkoxy-substituted PPV derivatives. This is because of the disturbance to the π-conjugation caused by a steric hindered structure. The TALK-PPV thin film exhibited an absorption peak at 446 nm, with an onset at 515 nm. Its PL emission maximum was at 554 nm. Cyclic voltammetric analysis showed the HOMO and LUMO energy levels of the TALK-PPV to be 5.77 and 3.36 eV, respectively. Light-emitting devices were fabricated with an ITO (indium-tin oxide)/PEDOT/polymer/Ca/Al configuration. The TALK-PPV component leads to pure green light emission with a CIE 1931 chromaticity of (0.20, 0.74) at 100 cd/m² brightness, which is very close to the standard green (0.21, 0.71) demanded by the NTSC (National Television System Committee). The maximum brightness of this device was 24,900 cd/m² with an efficiency of 1.45 cd/A.     

Synthesis and characterization of PPV-based light-emitting copolymer with alkylsilylphenyloxy pendant group for light-emitting diode applications

A novel light-emitting copolymer with high brightness and luminance efficiency was synthesized using the Gilch polymerization method, and its electro-optical properties were investigated. A polymer light-emitting diode (PLED) was fabricated in ITO/PEDOT/light-emitting copolymer/Ca/Al configuration. The turn-on voltage of the PLED was about 5.0 V with maximum brightness and luminance efficiency up to 1420 cd/m² at 16.2 V and 0.5 cd/A at 6.8 V, respectively.     

The effect of Ag layer thickness on the properties of WO3/Ag/MoO3 multilayer films as anode in organic light emitting diodes

Transparent conductive WO₃/Ag/MoO₃ (WAM) multilayer electrodes were fabricated by thermal evaporation and the effects of Ag layer thickness on the optoelectronic and structural properties of multilayer electrode as anode in organic light emitting diodes (OLEDs) were investigated using different analytical methods. For Ag layers with thickness varying between 5 and 20 nm, the best WAM performances, high optical transmittance (81.7%, at around 550 nm), and low electrical sheet resistance (9.75 Ω/cm²) were obtained for 15 nm thickness. Also, the WAM structure with 15 nm of Ag layer thickness has a very smooth surface with an RMS roughness of 0.37 nm, which is suitable for use as transparent conductive anode in OLEDs. The current density?voltage?luminance (J?V?L) characteristics measurement shows that the current density of WAM/PEDOT:PSS/TPD/Alq₃/LiF/Al organic diode increases with the increase in thickness of Ag and WO₃/Ag (15 nm)/MoO₃ device exhibits a higher luminance intensity at lower voltage than ITO/PEDOT:PSS/TPD/Alq₃/LiF/Al control device. Furthermore, this device shows the highest power efficiency (0.31 lm/W) and current efficiency (1.2 cd/A) at the current density of 20 mA/cm², which is improved 58% and 41% compared with those of the ITO-based device, respectively. The lifetime of the WO₃/Ag (15 nm)/MoO₃ device was measured to be 50 h at an initial luminance of 50 cd/m², which is five times longer than 10 h for ITO-based device.     

Low voltage red phosphorescent organic light-emitting devices with triphenylphosphine oxide and 4,4′-bis(2,2′-diphenylvinyl)-1,1′-biphenyl electron transport layers

We have developed red phosphorescent organic light-emitting devices operating at low voltages by using triphenylphosphine oxide (Ph₃PO) and 4,4′-bis(2,2′-diphenylvinyl)-1,1′-biphenyl (DPVBi) electron transport layers. 4,4′-bis(N-carbazolyl)-1,1′-biphenyl (CBP) and tris-(1-phenylisoquinolinolato-C²,N) iridium(III) [Ir(piq)₃] were used as host and guest materials, respectively. Small voltage drops across the electron transport layers and direct injection of holes from 4,4′,4″-tris[N-(2-naphthyl)-N-phenyl-amino]-triphenylamine (2-TNATA) hole transport layer into the Ir(piq)₃ guests are responsible for the high current density at low voltage, resulting in a high luminance of 1000 cd/m² at low voltages of 2.8–3.0 V in devices with a structure of ITO/2-TNATA/CBP:Ir(piq)₃/DPVBi/Ph₃PO/LiF/Al.     

Combined host–guest doping and host-free systems for high-efficiency white organic light-emitting devices

Highly efficient white organic light-emitting devices (WOLEDs) with a four-layer structure were realized by utilizing phosphorescent blue and yellow emitters. The key concept of device construction is to combine host–guest doping system of the blue emitting layer (EML) and the host-free system of yellow EML. Two kinds of WOLEDs incorporated with distinct host materials, namely N,N'-dicarbazolyl-3,5-benzene (mCP) and p-bis(triphenylsilyly)benzene (UGH2), were fabricated. Without using light out-coupling technology, a maximum current efficiency (η_C) of 58.8 cd/A and a maximum external quantum efficiency (η_EQE) of 18.77% were obtained for the mCP-based WOLED; while a maximum η_C of 65.3 cd/A and a maximum η_EQE of 19.04% were achieved for the UGH2-based WOLED. Meanwhile, both WOLEDs presented higher performance than that of conventionally full-doping WOLEDs. Furthermore, systematic studies of the high-efficiency WOLEDs were progressed.     

A novel blue-emitting Ir(III) complex with short excited state lifetime: Synthesis,structure, photophysical property,and electrophosphorescence performance

In this paper, we synthesize a triphenylamine-derived cyclometalating ligand of (4-benzothiazol-2-yl-phenyl)-diphenyl-amine (referred as BPDA) and its corresponding Ir(III) complex of (BPDA)₂Ir(acac) (acac=acetylacetone). The photophysical property, molecular structure, thermal property and electroluminescence performance of (BPDA)₂Ir(acac) are investigated in detail. It is found that (BPDA)₂Ir(acac) is an efficient emitter with high thermal stability and short excited state lifetime. The emission of (BPDA)₂Ir(acac) changes from deep blue (417 nm) to bluish green (500 nm) upon addition of different solvents. We also investigate its electrophosphorescence performance. A maximum electroluminance of 8820 cd/m² peaking at 494 nm is achieved, with the highest device efficiency of 1.72 cd/A.     

Screen-printed white OLED based on polystyrene as a host polymer

We demonstrate the use of screen printing in the fabrication of single-layer organic-light-emitting devices (OLEDs). The organic layer is a single-layer of polystyrene, in which we incorporate rubrene for orange emission and α-NPD, DPVBi for blue emission. An appropriate mixing of the two colors produced white emission by incomplete Förster energy transfer. We showed the role of each constituent, α-NPD, DPVBi and rubrene in the emission characteristics of OLEDs. The turn-on voltage of screen-printed white OLEDs was about 10 V with maximum brightness and luminous efficiency up to 1300 cd/m² and 9 cd/A, respectively.     

Kinetic studies of the electrochemical nitrogen reduction and incorporation into yttria stabilized zirconia

The kinetics of the electrochemical reduction of molecular nitrogen at gold micro electrodes on yttria stabilized zirconia (YSZ) solid oxide electrolyte is studied by steady state polarization measurements. From the η / lg i plot for both cathodic and anodic polarization the apparent transfer coefficients α_a and α_c are evaluated. The sum of α_a + α_c exceeds unity and thus a multistep electron transfer process is suggested. The concept of the stoichiometric number is applied to the electrode reaction N₂ + 6e⁻ = 2N³⁻ supposing that the overall process involves at least two intermediate species. On the basis of the evaluation of the experimental results the reaction N₂⁻ + e⁻ ⇌ N₂²⁻ is suggested as the rate determining reaction step for the cathodic nitrogen reduction and nitride formation.     

Organic light sources look forward to optimize the photosynthesis process

We introduce a series of organic LEDs that exploit the monomer and excimer emissions from single phosphor dopant emitters. These organic LEDs were found to be effective in the simultaneous creation of blue and red emission bands essential for plant growth. By varying the concentration of novel phosphorescent dopants selected from a series of newly synthesized platinum complexes [PtL^22–25Cl], we have manufactured the blue-biased LEDs [with the Commission Internationale de L’Eclairage (CIE) coordinates (x, y) (0.27, 0.37)] and the red-biased LEDs [CIE coordinates (0.53, 0.38)], at a high luminance of ≈500 cd/m² and with external electroluminescence (EL) quantum efficiency of 15–18% photon/electron (→ power efficiency 8–12 lm/W). The EL spectrum most suitable for the action spectrum of photosynthesis yield was that of a device incorporating 20 wt.% content of [PtL²³Cl]. This LED yielded photosynthetic photon flux (PPF) approaching 10 μmol s⁻¹ W⁻¹ of the electrical power, a value which significantly exceeds that for the professional lamps used commonly for horticultural lighting.     

1.34 μm fluorescence and laser properties of Nd:La0.11Y0.89VO4 crystal

For Nd:La_xY_1−xVO₄ (x = 0.11) crystal, the ⁴F_3/2 → ⁴I_13/2 transition property was investigated for the first time. The fluorescence peak of Nd:La_0.11Y_0.89VO₄ crystal exhibited obvious inhomogeneous broadening comparing with that of Nd:YVO₄ crystal. With laser diode array as pump source, 1.34 μm continuous-wave (CW) and active Q-switched laser operations based on ⁴F_3/2 → ⁴I_13/2 transition were realized. For CW laser operation, the maximum output power of 2.47, 2.13 W is obtained with slope efficiencies of 29.4%, 27.6%, and optical to optical conversion efficiency of 26.2%, 24.7%, respectively for a, c cut crystal samples. For acousto-optic (AO) Q-switched laser operation, the shortest pulse width, highest peak power and maximum pulse energy came from the a-cut sample, which were 13 ns, 2.69 kW and 35 μJ, respectively.     

Submillimeter-wave measurements of N2 and O2 pressure broadening for HO2 radical generated by Hg-photosensitized reaction

The N₂ and O₂ pressure broadening coefficients of the pure rotational transitions at 625.66 GHz (N_KaKc=10_1?9–10_0?10, J=10.5–10.5) and 649.70 GHz (N_KaKc=10_2?9–9_2?8, J=9.5–8.5) in the vibronic ground state X²A′ of the perhydroxyl (HO₂) radical have been determined by precise laboratory measurements. For the production of HO₂, the mercury-photosensitized reaction of the H₂ and O₂ precursors was used to provide an optimum condition for measurement of the pressure broadening coefficient. The Superconducting Submillimeter-wave Limb Emission Sounder (SMILES) was designed to monitor the volume mixing ratio of trace gases including HO₂ in the Earth's upper atmosphere using these transitions. The precise measurement of pressure broadening coefficient γ in terms of the half width at half maximum is required in order to retrieve the atmospheric volume mixing ratio. In this work, γ coefficients of the 625.66 GHz transition were determined for N₂ and O₂ at room temperature as γ(N₂)=4.085±0.049 MHz/Torr and γ(O₂)=2.578±0.047 MHz/Torr with 3σ uncertainty. Similarly, the coefficients of the 649.70 GHz transition were determined as γ(N₂)=3.489±0.094 MHz/Torr and γ(O₂)=2.615±0.099 MHz/Torr. The air broadening coefficients for the 625.66 GHz and 649.70 GHz lines were estimated at γ(air)=3.769±0.067 MHz and 3.298±0.099 MHz respectively, where the uncertainty includes possible systematic errors. The newly determined coefficients are compared with previous results and we discuss the advantage of the mercury-photosensitized reaction for HO₂ generation. In comparison with those of other singlet molecules, the pressure broadening coefficients of the HO₂ radical are not much affected by the existence of an unpaired electron.     

High adsorption capacity of two Zn-based metal–organic frameworks by ultrasound assisted synthesis

Micro- and nano-rods and plates of two 3D, porous Zn(II)-based metal–organic frameworks [Zn(oba)(4-bpdh)_0.5]_n·(DMF)_1.5 (TMU-5) and [Zn(oba)(4-bpmb)_0.5]_n (DMF)_1.5 (TMU-6) were prepared by sonochemical process and characterized by scanning electron microscopy, X-ray powder diffraction and IR spectroscopy. These MOFs were synthesized using a non-linear dicarboxylate (H₂oba = 4,4-oxybisbenzoic acid) and two linear N-donor (4-bpdh = 2,5-bis(4-pyridyl)-3,4-diaza-2,4-hexadiene and 4-bpmb = N¹,N⁴-bis((pyridin-4-yl)methylene)benzene-1,4-diamine) ligands by ultrasonic irradiation. Sonication time and concentration of initial reagents influencing size and morphology of nano-structured MOFs, were also studied. Calcination of TMU-5 and TMU-6 at 550 °C under air atmosphere yields ZnO nanoparticles. TMU-5 and TMU-6 exhibited maximum percent adsorption of 96.2% and 92.8% of 100 ppm rhodamine B dye, respectively, which obeys first order reaction kinetics.     

Investigation of enhancement mode HfO2 insulated N-polarity GaN/InN/GaN/In0.9Al0.1N heterostructure MISHEMT for high-frequency applications

In this paper, we examined normally-OFF N-polar InN-channel Metal insulated semiconductor high-electron mobility transistors (MISHEMTs) device with a relaxed In_0.9Al_0.1N buffer layer. In addition, the enhancement-mode operation of the N-polar structure was investigated. The effect of scaling in N-polar MISHEMT, such as the dielectric and the channel thickness, alter the electrical behavior of the device. We have achieved a maximum drain current of 1.17 A/mm, threshold voltage (V_T) =0.728 V, transconductance (g_m) of 2.9 S mm⁻¹, high I_ON/I_OFF current ratio of 3.23×10³, lowest ON-state resistance (R_ON) of 0.41 Ω mm and an intrinsic delay time (τ) of 1.456 Fs along with high-frequency performance with f_t/ f_max of 90 GHz/109 GHz and 180 GHz/260 GHz for T_CH =0.5 nm at V_ds =0.5 V and 1.0 V. The numerically simulated results of highly confined GaN/InN/GaN/In_0.9Al_0.1N heterostructure MISHEMT exhibits outstanding potential as one of the possibility to replace presently used N-polar MISHEMTs for delivering high power density and frequency at RF/power amplifier applications.     

Luminescent properties of red-emitting LiSr4B3O(9−3x/2)Nx:Eu2+ phosphor for white-LEDs

An Eu²⁺-activated oxynitride LiSr_(4?y)B₃O_(9?3x/2)N_x:yEu²⁺ red-emitting phosphor was synthesized by solid-state reactions. The synthesized phosphor crystallized in a cubic system with space group Ia–3d. The LiSr₄B₃O_(9?3x/2)N_x:Eu²⁺ phosphors exhibited a broad red emission band with a peak at 610 nm and a full width at half maximum of 106 nm under 410 nm excitation, which is ascribed to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. The optimal doped nitrogen concentration was observed to be x=0.75. The average decay times of two different emission centers were estimated to be 568 and 489 ns in the LiSr_3.99B₃O_8.25N_0.5:0.01Eu²⁺ phosphors, respectively. Concentration quenching of Eu²⁺ ions occurred at y=0.07, and the critical distance was determined as 17.86 Å. The non-radiative transitions via dipole–dipole interactions resulted in the concentration quenching of Eu²⁺-site emission centers in the LiSr₄B₃O₉ host. These results indicate LiSr₄B₃O_(9?3x/2)N_x:Eu²⁺ phosphor is promising for application in white near-UV LEDs.