Total chromatographic optimization (TOCO) II. Precision and efficiency of analysis

Summary A chromatographic system set at an operating condition takes its own precision and efficiency which are numerically described by the information called FUMI and the information flow , respectively. Optimization for a variable such as mobile phase composition draws a line in the - space. This paper demonstrates that optimization of different variables displays different patterns of lines in the - space. The variables examined here are mobile phase composition, column length, flow rate (velocity) and detection wavelength (or the amount of internal standard). Clear difference in the analytical roles of the variables can be known from the - plots.     

VUV-Photolyse von Methanol bei 1236 Å

Zusammenfassung Es wird über die indirekte und die direkte VUV-Photolyse von luftfreiem Methanol in flüssiger Phase bei 1236 Å berichtet. Bei der Bestrahlung von wäßr. 0,01m-Methanol wurden folgende Produkte und Ausbeuten erhalten: (H₂)=1,00, (HCHO)=0,27, (CH₂OH)₂=0,12, (CH₂OH·CHO)=0,04 und (HCOOH)=0,02. Die Photolyse von flüssigem Methanol lieferte die gleichen Produkte, jedoch mit höheren Ausbeuten: (H₂)=1,50, (HCHO)=0,98, (CH₂OH)₂=0,28 und (CH₂OH·CHO)=0,06. Unter Anwendung von Methanol als Radikalfänger konnte auch die Quantenausbeute der Wasserphotolyse bei 1236 Å, (H,OH)=1,025 verifiziert werden. Wahrscheinliche Reaktionsmechanismen werden diskutiert.

---

V.U.V.-Photolysis of methanol at 1236 Å

The indirect and the direct v.u.v.-photolysis of air free methanol in liquid phase at 1236 Å is reported. After irradiation of aqueous 0.01M-methanol the following products were obtained: (H₂)=1.00, (HCHO)=0.27, (CH₂OH)₂=0.12, (CH₂OH·CHO)=0.04 and (HCOOH)=0.02. The photolysis of liquid methanol yielded the same compounds, however with higher amount as follows: (H₂)=1.50, (HCHO)=0.98, (CH₂OH)₂=0.28 and (CH₂OH·CHO)=0.06. Using methanol as a scavenger for the H and OH radicals the quantum yield of the water photolysis at 1236 Å could be verified to be (H,OH)=1.025. Probable reaction mechanisms are discussed.

---

---

Mit 3 Abbildungen

---

Herrn Prof. Dr.E. Broda zum 60. Geburtstag gewidmet.     

Total chromatographic optimization (TOCO) I. Simultaneous optimization of many variables in liquid chromatography

Summary The following chromatographic variables are totally optimized based on the recently developed information theory of optimization: mobile phase composition, column length, flow rate, wavelength, and the amount of internal standard. The optimal internal standard is selected from among six candidates. Two types of optimal conditions (- and -optimals) are proposed: the -optimal is defined as the most precise analysis (the maximal ) while the -optimal is the most efficient (rapid) analysis (the maximal ). The observation times for the determination of an antipyretics mixture (three components) in liquid chromatography are ca. 50 s for the -optimal and ca. 8 min for the -optimal. The reliability of the - and -optimals is verified by experiments.     

Comparative analysis of catalytic properties of 3d metal acetylacetonates in liquid-phase oxidation of dibenzyl ether

Studies of the liquid-phase oxidation of dibenzyl ether in the presence of 12 acetylacetonates of 3d metals and a comparative analysis of the dependence of the catalytic activity and selectivity of chelates on the atomic number and valence state have been carried out.

---

12 3d . .

     

Photochemische Carbonylierung und Oxydation von wässerigem Methanol bei 1470 Å

Zusammenfassung Das photochemische Verhalten von wässerigem Methanol, gesättigt mit Argon, CO bzw. O₂ wurde bei 1470 Å als Funktion der VUV-Dosis und der Methanolkonzentration untersucht. Als Reaktionsprodukte wurden Wasserstoff, Formaldehyd, Glykolaldehyd, Glykol, Ameisensäure und in Gegenwart von Sauerstoff auch Peroxyd nachgewiesen. In 10^–2 m-Methanol, gesättigt mit Argon, betrug (H₂)=0,69 und (HCHO)=0,22, in Gegenwart von 7·10^–4 m-CO war (H₂)=0,10 und (HCHO)=0,29, während bei Sättigung mit O₂ (10^–3 mO₂) (H₂)=0,01, (HCHO)=0,33, (HCOOH)=0,20 und (H₂O₂)=0,22 gefunden wurde. Die -Werte der übrigen Produkte, die unter den angegebenen Bedingungen erhalten wurden, waren <0,07. Durch Erhöhung der Methanolkonzentration bis zu reinem Methanol, gesättigt mit Argon, stieg die Ausbeute von H₂, HCHO und (CH₂OH)₂ entsprechend an, während die von HCOOH und CH₂OHCHO sich praktisch nicht änderte. Bei reinem, mit Argon gesättigtem Methanol war (H₂)=0,89 und (HCHO)=0,73. Das Glykol erreichte bei etwa 2m-Methanol eine Höchstausbeute von =0,38. Reaktionsmechanismen werden diskutiert.

---

Photochemical carbonylation and oxidation of aqueous methanol at 1470 Å

The photochemical behaviour of aqueous methanol saturated with argon, CO and O₂, resp., has been investigated at 1470 Å as a function of the v.u.v. dose and the methanol concentration. Hydrogen, formaldehyde, glycolaldehyde, glycol, formic acid and, in the presence of oxygen, also peroxide were detected. In 10^–2 M-CH₃OH saturated with argon (H₂)=0,69 and (HCHO)=0,22 were found; in the presence of 7·10^–4 M-CO the yields are (H₂)=0,10 and (HCHO)=0,29, whereas under saturation with oxygen (10^–3 M O₂) (H₂)=0,01, (HCHO)=0,33, (HCOOH)=0,20 and (H₂O₂)=0,22. The quantum yields of all other products obtained under the conditions mentioned above are <0.07. With increasing methanol concentration up to pure argon saturated methanol, the quantum yields of H₂, HCHO and (CH₂OH)₂ increase correspondingly, whereas the yields of HCOOH and CH₂OHCHO remain practically unchanged. When irradiating pure, argon saturated methanol, (H₂)=0,89 and (HCHO)=0,73 were found. A maximum yield of (CH₂OH)₂=0,38 was achieved using 2M-CH₃OH. Reaction mechanisms are discussed.

     

3, 3, 3-Trifluoropropyl(methyl)cyclosiloxanes

The catalytic rearrangement of the cyclopentasiloxanes _mD_5-m, where represents a 3, 3, 3-trifluoropropyl(methyl)siloxane link and D a dimethylsiloxane link, and m=2–5 has been studied by the method described previously [1]. The rate of rearrangement and the rate of formation of a linear polysiloxane rise with an increase in m from 2 to 4. The equilibrium concentration of the linear polysiloxane formed from _mD_5-m and from _mD_4-m (m=0–4) [1] is inversely proportional to the molar fraction of links in the ring and rises with an increase in the total concentration of siloxane links in solution. Results have been obtained on the kinetics of the formation of the cyclosiloxanes _mD_n (where m=0–5, n=0–5, and m+n=3-6) during the rearrangement of the cyclopentasiloxanes _mD_5-m. It has been established that at equilibrium a mixture of cyclosiloxanes _mD_n containing practically constant ratios of tetramers, pentamers, and hexamers (m+n=4, 5, and 6) is obtained, regardless of the composition and structure of the initial cyclosiloxane and of the conditions of rearrangement (polymerization). The cyclopentasiloxanes _mD_5-m are less active in the process of rearrangement than the cyclotetrasiloxanes _mD_4-m. The activity of the cyclosiloxanes in rearrangement in the presence of a base rises in the sequence D₄D_{3 2}D₃<₃D₂<₄D < ₂D₂ < ₃D.For part II, see [1].     

The Influence of Dimerization of Water-Soluble Metalloporphyrins as Photosensitizers on the Efficiency of Generation of Singlet Oxygen

Quantum yields () for the generation of singlet oxygen sensitized by Pd(II) complexes of water-soluble porphyrins: meso-tetrakis(4-N-methylpyridyl)porphine [PdTMPyP]⁴⁺ ( = 0.9), meso-tetrakis(4-N,N,N-trimethylaminophenyl)porphine [PdTTMAPP]⁴⁺ ( = 0.8), meso-tetrakis(4-carboxyphenyl)porphine [PdTCPP]^4– ( = 0.7), and meso-tetrakis(4-sulfonatophenyl)porphine [PdTSPP]^4– ( = 0.5) were determined using a chemical method. It was found that the dimerization and aggregation of metalloporphyrins greatly influence the value. The quantum yields evaluated for the formation of singlet oxygen sensitized by metalloporphyrin monomeric and dimeric forms are _{, M} 0.9 and _{, D} 0.2, respectively, and do not depend on the porphyrin nature.     

Application of thermal analysis in the study of alkyd-allyl moulding compounds

Alkyd-allyl moulding compounds containing diallyl orthophthalate as networking monomer and five other unsaturated polyester resins were investigated by DTA. Analysis of DTA curves allowed choice of the alkyds forming well-cured moulding compounds within the investigated monomer. The thermal resistance and acetone absorption of the cured sample confirmed the choice of the alkyd.The influence of 6 different powder fillers on the exothermic effect of curing of alkydallyl moulding compounds was evaluated by DTA.

---

Zusammenfassung Mittels DTA wurde die HÄrtung von Alkyd-Allyl Pre\massen aus o-Diallylphthalat und fünf Polyestern untersucht. Anhand der DTA-Kurven konnten gut gehÄrtete Pre\massen ergebende Alkyde ausgewÄhlt werden. Thermische StabilitÄt (TG) und Acetonaufnahme bestÄtigen die ZuverlÄssigkeit dieser Auswahlmethode. Mit dieser Methode wurde auch der Einflu\ von sechs verschiedenen Füllstoffen auf die WÄrmeeffekte des HÄrtungsprozesses bestimmt.

---

— - . , . . - .

     

Investigation of dehydration process,II

The dehydration of hydrated calcium and strontium bromides and iodides was studied by thermogravimetry and differential thermal analysis. The melting in the crystallization water was distinguished from the dehydration in a self-generated atmosphere. The results of the TG and DTA curves made simultaneously were verified by measurements with a Du Pont DSC apparatus. This latter investigation was extended to the previously studied chlorides too. Correlations were found between the temperature of melting or of dehydration and the ionic radii of the respective cations and anions.

---

Zusammenfassung Die Dehydratisierung von Calcium- und Strontium-Bromid- und Jodidhydraten wurde mit den Methoden der Thermogravimetrie und Differentialthermoanalyse verfolgt. Das Schmelzen im Kristallwasser wurde von der Dehydratisierung in der selbsterzeugten Atmosphäre getrennt. Die Ergebnisse der simultan erhaltenen TG- und DTA-Kurven wurden durch Messungen mit einem Du Pont DSC-Gerät bestätigt, wobei die bereits schon untersuchten Chloride mit einbezogen wurden. Korrelationen zwischen den Schmelzoder Dehydratisierungstemperaturen und den Ionenradien der entsprechenden Kationen und Anionen werden beschrieben.

---

Résumé Etude de la déshydratation des bromures et iodures de calcium et de Strontium hydratés par thermogravimétrie et par analyse thermique différentielle. La fusion dans l'eau de cristallisation a été distinguée de la déshydratation en atmosphère auto-générée. Les résultats des courbes TG et ATD obtenues simultanément ont été vérifiés par des mesures effectuées à l'aide d'un analyseur calorimétrique différentiel (DSC) Du Pont. L'étude a également été étendue aux chlorures précédemment étudiés. On propose des corrélations entre les températures de fusion ou de déshydratation et les rayons ioniques des cations et anions respectifs.

---

, . . . . .

     

Seawater—A test of multicomponent electrolyte solution theories. I. The apparent equivalent volume,expansibility, and compressibility of artificial seawater

The apparent equivalent volume _V, expansibility _E, and compressibility _K of an artificial seawater solution containing10 ionic components (Na⁺, Mg²⁺, Ca²⁺, K⁺, Sr²⁺, Cl^–, SO ₄ ^2– , HCO ₃ ^– , Br^–, and F^–) and one nonionic component (H₃BO₃) has been determined from0 to40°C (in5° intervals) and from0.1 to0.8 m ionic strength at1 atm. The concentration dependence (I_v=volume ionic strength) of the _V's, _E's, and _K's have been examined by using a Masson-type equation, = ^° +S'I _V ^1/2, and a Redlich-type equation, = ^° +SI _V ^1/2 +BI _V, where ^° is the infinite-dilution value, S is the empirical Masson slope, S is the theoretical Debye-Hückel slope, and B is an empirical deviation constant. By using Young's rule, = E_i(i), the apparent equivalent volumes, expansibilities, and compressibilities for sea salt have been estimated from the ionic and nonionic components making up the mixture. The estimated apparent molal quantities agree very well with the directly measured values providing the concentration terms, S _i and B_i, are weighted according to the methods of Wood and Reilly.Contribution Number 1599 from the University of Miami.     

Radiolysis of [EtC5H4Mn(CO)2NO]+(PF6)– and Evolution of the Nearest Environment of the Manganese Atoms in the Complex

X-ray emission and EXAFS spectroscopies were used to examine changes in the nearest environment of manganese atoms upon radiolysis of [EtC₅H₄Mn(CO)₂NO]⁺(PF₆)^– at different energy exposures (). It was found that the initial complex loses the CO and NO ligands at = 4.5 × 10⁶ J/m². An increase in to 7.5 × 10⁶ J/m² gives rise to Mn–Mn bonds with lengths characteristic of Mn dimers. At = 9.0 × 10⁶ J/m², Mn nanoparticles are formed; they interact with the carbon atoms of EtC₅H₄ and the fluorine atoms of PF₆ anions. Further increase in = 2.6 × 10⁷ J/m² yields manganese-containing nanoparticles structured like metallic Mn; their surface atoms interact with carbon atoms formed in the disintegration of the EtC₅H₄ ligands. The formation of manganese carbides and fluorides at = 2.6 × 10⁸ J/m² reduces the content of the metal constituent in nanoparticles; this content is zero at = 4.4 × 10⁸ J/m². The final radiolysis products are manganese carbides and fluorides (or fluorocarbides).     

An Alternative Method of Introducing Fugacity

In current textbooks fugacity is introduced according to its differential or integral mathematical formulation. In this article an alternative method of explanation is offered. It is suggested that the real state of a pure gas can be described by comparing it to a hypothetical idealized state. The differences between these two states can then be expressed in terms of a function, , defined as (T,P) = _real(T,P) - _ideal(T,P) where _real and _ideal are the chemical potentials of the gas in its real and ideal states, respectively. The function is a molar excess quantity and is expressed as (T,P) = RT1n where is the fugacity coefficient. This approach introduces fugacity deductively through the function, which leads to , the fugacity coefficient. This method is also appropriate for introducing the activity of solution components and the fugacity of a real gas in gaseous mixtures.     

Interaction of PM12?nVnO40?(3+n) (M=Mo, W) heteropoly complexes with nitrogen oxide

In aqueous solution, PM_12–nV_nO₄₀ ^–(3+n) (M=Mo,W) hetero-polyanions provide a much faster oxidation of NO than mononuclear VO ₂ ⁺ ions, yielding HNO₂, NO ₃ ^– and reduced HPA.

---

, PM_12–nV_nO₄₀ ^–(3+n) (M=Mo,W) , VO ₂ ⁺ , NO HNO₂ NO ₃ ^– .

     

3, 3, 3-Trifluoropropyl(methyl)cyclosiloxanes

The influence of the number of 3, 3, 3-trifluoropropyl(methyl)siloxane links (/) in the cyclotetrasiloxanes _mD_4-m, where D represents the dimethylsiloxane link and m=0–4, on the rearrangement of these compounds in acetone solution under the action of sodium siloxanolate has been studied. The rearrangement takes place with the formation of a linear polysiloxane the degradation of which yields, in addition to the initial ring, cyclosiloxanes with a different structure. The rate of rearrangement of _mD_4-m and of the formation of a linear polysiloxane rises with an increase in m from 0 to 3. The equilibrium concentration of the linear polysiloxane formed from _mD_4-m is inversely proportional to m. Results have been obtained on the kinetics of the formation of the cyclosiloxanes _mD_n, where m=0–5, n=0–5, and m+n=3–6, in the rearrangement of the rings D₃, ₂D₂, ₃D, and ₄. The reactivity of the siloxane links rises in the sequence (CH₃)₂Si-O-Si(CH₃)₂ < (CF₃CH₂CH₂)-(CH₃) Si-O-Si(CH₃)₂ <(CF₃CH₂CH₂) (CH₃)Si-O-Si(CH₃) (CH₂CH₂CF₃) . Because of the negative inductive effect transferred through the siloxane links, the 3, 3, 3-trifluoropropyl groups strongly activate the siloxane ring with respect to nucleophiiic reagents.For part I, see [3].     

Thermal and other studies on bivalent metal selenltes

BaSeO₃·2·5H₂O(I), PbSeO₃· 2H₂O(II) and CdSeO₃·3.5H₂O(III) were prepared and analysed. Their hygroscopicity and solubility was investigated. These compounds have high thermal Stability, as shown by their TG and DTA data. IR spectra show multi-dentate coordination of selenite to cations, due to considerable splitting of the asymmetric v₃ and v₄ bands of SeO ₃ ^{2 –} in the 780-730 cm^–1 and 420-325 cm^–1 region.Tentative structures have been proposed involving bridging oxygen atoms.

---

Zusammenfassung BaSeO₃-2.5H₂O(I), PbSeO₃ · 2H₂O(II) und CdSeO₃· 3.5H₂O(III) wurden hergestellt, analysiert sowie deren Hygroskopizität und Löslichkeit untersucht. TG- und DTA-Untersuchungen erweisen die hohe thermische Stabilität dieser Verbindungen. Die IR-Spektren zeigen mehrzählige Koordination von Selenit zu Kationen, was aus einer beträchtlichen Aufspaltung der antisymmetrischenv ₃ undv ₄ Banden von SeO ₃ ^{2 –} im Bereich 780-730cm^–1 bzw. 420-325 cm^–1 hervorgeht. Es wurden versuchsweise Strukturen mit überbrückenden Sauerstoffatomen vorgeschlagen.

---

BaSeO₃· 2,5H₂O, PbSeO₃ · 2H₂O CdSeO₃ · 3,5H₂O . . - , v ₃ v ₄ SeO ₃ ² }- 780-730 420-325 ^–1. , .

     

Vibrational isotope effect by the low rank perturbation method

Mathematical formalism of the low rank perturbation method (LRP) is applied to the vibrational isotope effect in the harmonic approximation. A pair of two n-atom isotopic molecules A and B which are identical except for isotopic substitutions at atomic sites is considered. Relations which express vibrational frequencies _k and normal modes _k of the perturbed isotopic molecule B in terms of the vibrational frequencies _i and normal modes _i of the unperturbed molecule A are derived. In these relations complete specification of the unperturbed normal modes _i is not required. Only amplitudes | _i of normal modes _i at sites affected by the isotopic substitution are needed.     

Catalytic conversion of dimethylsulfide to methylmercaptan

The effect of reaction conditions on the methylmercaptan formation from dimethylsulfide in H₂S catalyzed by -Al₂O₃ has been studied. The reaction is first order with respect to dimethylsulfide. It has been revealed that the maximum activity in this reaction is observed for the catalysts whose surface contains a large number of aprotonic acid centers and moderate-strength basic sites.

---

-Al₂O₃. , . . , , .

     

De la possibilité d'utiliser une base de Slater uniquement s dans les calculs relatifs aux atomes et aux molécules

A 2p STO may be replaced by a linear combination of 1s and 2s orbitals, = (1s_A-1s_f) + (2s_A-2s_B). Such a should improve LCAO-MO-SCF calculations in minimal STO basis set with simpler programs.     

Mössbauer study of the thermal decompositions of alkaline earth tris(oxalato)ferrates(III)

The thermal decompositions of alkaline earth tris(oxalato)ferrates(III) (Mg, Ca, Sr and Ba) have been studied by Mössbauer spectroscopy and other techniques. During the thermal decomposition, dehydration occurs first, followed by reduction to iron(II) species, and oxides and ferrites (MFe^IIIO₄) are then formed at higher temperature. In the case of strontium tris(oxalato)ferrate(III), strontium ferrite (SrFe^IVO₄) is formed at 700°.

---

Zusammenfassung Die thermische Zersetzung von Tris(oxalato)ferraten(III) der Erdalkalimetalle (Mg, Ca, Sr, Ba) wurde durch Mössbauer-Spektroskopie und andere Techniken untersucht. Im Verlaufe der thermischen Zersetzung verläuft zunächst die Dehydratisierung, gefolgt von der Reduktion zu Eisen(II)-Species. Oxide und Ferrite (MFe^IIIO₄) werden danach bei höheren Temperaturen gebildet. Strontium-tris(oxalato)-ferrat(III) geht bei 700 °C in Strontiumferrit (SrFe^IVO₄) über.

---

() () , , ë . , , MFe^IIIO₄. 700° SrFe^IVO₄.

     

Intermediate oxygen-containing compounds in oxidative condensation of methane over sodium-manganese catalysts

CH₂O conversion over sodium-manganese oxide and oxychloride catalysts in methane dehydrodimerization have been studied under unsteady-state conditions at high temperatures (600–750 °C). It has been established that formaldehyde conversions produce deep oxidation (CO, CO₂), condensation (C₂H₄, C₂H₆) and methanation products through CH₃O^– formation and decomposition.

---

(600–750°C) CH₂O - . , (CO, CO₂) (C₂H₄, C₂H₆), , CH₃O^–.