Interactions of hafnocene and zirconocene dihydrides with acetylenes. Synthesis of the first acetylene complex of hafnium

The first acetylene complex of hafnium, Cp₂Hf[Me₃SiC=CHf(H)Cp₂], was synthesized by the reaction of hafnocene dihydride Cp₂HfH₂ with bis(trimethylsilyl)acetylene in benzene. The reaction is accompanied by elimination of the Me₃Si group from the molecule of the initial acetylene, as a result of which the acetylenide derivative of hafnium Cp₂Hf(C=CSiMe₃)(H) acts as an acetylene ligand in the complex. Under analogous conditions, the reaction of zirconocene dihydride Cp₂ZrH₂ with bis(trimethylsilyl)acetylene affords an analogous acetylene complex of zirconium Cp₂Zr(M₃SiC=CZr(H)Cp₂]. Reactions of Cp₂HfH₂ with tolane and 3-hexyne proceed differently than the reaction with bis(trimethylsilyl)acetylene. Here the corresponding hafnacyclopentadiene metallacycles are the final products. For preliminary communication, see Ref. 3. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 853–856, April, 1997.     

Acetylene‐Hydration Kinetics on Cadmium‐Exchanged Clinoptilolite Catalyst,Preliminary Communication

Hydration of acetylene under steady‐state conditions around 450 K proceeds on Cd‐clinoptilolite without catalyst deactivation and formation of by‐products. Reaction rates were determined under steady‐state conditions at different partial pressures of acetylene, water, and acetaldehyde. In relation with the results, rate equations for different kinetic models were evaluated. Langmuir‐Hinshelwood kinetics was established. According to this model, acetylene and water must adsorb on similar sites, and the surface reaction between the adsorbed reactants is the rate‐determining step, which is followed by equilibrated desorption of the produced acetaldehyde.     

Reaktionskinetische Untersuchungen der Hydratisierung von Acetylen zu Acetaldehyd an Molekularsieben,die mit katalytisch wirksamen Metall-Ionen beladen sind

The kinetics of the catalytic hydration of acetylene to acetaldehyde in the gas-phase by incorporation of catalytic metal ions on molecular sieves has been studied in a differential reactor. The main product was acetaldehyde besides of small amounts of crotonaldehyde and acetic acid. The catalysts [cadmium(II)-, zinc(II)-, copper(II)- and silver(I)-13 X-molecular sieves] were deactivated at a rate proportional to the square of the hydration rate. The initial hydration rate calculated on the basis of this relation was first order in the acetylene concentration. Starting rate of hydration and rate of deactivation increase with increasing concentration of metal ions on the sieve. The temperature dependence of the rate follows the law of Arrhenius The activation energies of hydration and deactivation, respectively, were calculated. Pore diffusion is a limiting factor. The poison is homogeneously deposited on the catalyst and weakly adsorbed, as it is shown by the criterion of Wheeler. The rate of deactivation decreases with increasing water/acetylene ratio. The deactivation rate which is due to deposition of polymerised acetylene and/or acetaldehyde, is slow with zinc and cadmium catalysts, and more rapid with copper and silver catalysts.     

The gas-phase decomposition of methylsilane. Part II. Mechanisms of decomposition under static system conditions

The static system pyrolysis of methylsilane (T ～ 700 K, P_T ～ 150 torr), pure and in the presence of ethylene, propylene, and acetylene, has been investigated. It is proposed that in the uninhibited system, the major products (silane and dimethylsilane) are produced by free radical processes, and that the free radicals are formed at the walls from methylsilylenes. In the presence of olefins, the free radicals are trapped to form methylsilane adducts. In acetylene, trapping of methylsilylenes prevents free radical production and eliminates the free radical produced products of the pure and the olefin inhibited systems. Rates of initiation correlate with rates of reactant loss in acetylene inhibited systems, and with rates of hydrogen formation in olefin inhibited systems. Rough estimates of primary dissociation process yields give for the 1,1-H₂ elimination ?_1,1 ? 0.78, for the 1,2-H elimination ?_1,2 ? 0.16, and for the methane elimination ?CH₄ ? 0.06 at 700 K. Deuteration lowers initial step kinetics by about 15%.     

Trofimov Reaction with Oximes Derived from Ketosteroids: Steroid-Pyrrole Structures

Steroidal ketone oximes, namely pregnenolone oxime, ⁵-cholesten-3-one oxime, and progesterone dioxime react with acetylene in superbasic systems (Trofimov reaction) to afford steroid-pyrrole assemblies. The process is accompanied by prototropic migration of double bonds in the steroid fragment and vinylation of hydroxy groups in sterols with acetylene. The O-vinyl group can readily be removed by methanolysis.     

Effect of acetylene on the γ-radiation-induced polymerization of ethylene

The effects of acetylene on the γ-radiation-induced polymerization of ethylene were studied from the viewpoint of the gaseous products and polymer structure. The experiments were carried out under a pressure of 400 kg/cm²; the temperature was 30°C; the does rate was 1.1 × 10⁵ rad/hr; and the acetylene content was 0–20%. The solid polymer was obtained in the polymerization of ethylene containing 2.2% acetylene, while the monomer containing 19.7% acetylene gave a yellowish viscous oil. The polymer yield and molecular weight decreased remarkably with acetylene content. The main gaseous product was hydrogen, and trace amounts of butane, butene-1, butadiene-1,3, and benzene and its derivatives were also observed. The rate of formation of hydrogen was almost independent of acetylene content and there was no difference in acetylene contents before and after the irradiation was found. The infrared spectra of the polymers showed the presence of vinylidene, trans-vinylene, and terminal vinyl unsaturations, 1,4-disubstituted benzene, and carbonyl groups. The contents of trans-vinylene, terminal vinyl, and methyl groups increased with acetylene content, and that of vinylidene was independent of acetylene content. The monomer reactivity ratios of ethylene and acetylene were evaluated as 45.5 and 66.0, respectively. On the basis of the results, the effects of acetylene on the γ-radiation-induced polymerization of ethylene were discussed.     

Quantum-chemical investigation of mechanisms of reactions of nucleophilic addition to acetylene. 7. Evaluation of possible interactions in C2H2/MOH/DMSO system

Within the framework of the ab initio method SCF MO LCAO, using a model potential, the influence of alkali metal cations on the reactivity of the acetylene molecule has been investigated. Activation of acetylene with respect to a nucleophile is favored by a lowering of energy of the vacant * orbital upon coordination, a change in its form as a consequence of sufficiently free motion of the cation along the triple bond, and stabilization of the transdistorted form of acetylene in the complex. In the acetylene/alkali/DMSO system, the activating capability of cations is related to the ease of replacement of a solvent molecule in the solvate complex of the acetylene molecule, this capability increasing in the series Li < Na< K.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 8, pp. 1793–1797, August, 1990.     

Acetylene Pyrolysis in Tubular Reactor

Pyrolysis of acetylene was investigated in a tubular reactor of graphite with an internal lining of alumina. The temperature range was 850–1650 °C, and the pressure was about 0.133 bar (100 Torr). Pure acetylene and acetylene diluted with argon or hydrogen were used as feed. Carbon and hydrogen are the main products from acetylene pyrolysis particularly at higher conversion. At lower conversion of acetylene, other gas products were formed; the amount of these depended on temperature, dilution, and conversion. Benzene and vinyl acetylene are the main gas products from pyrolysis of pure acetylene below 1000 °C and at low conversion. Diacetylene increases with increasing temperature. Dilution with hydrogen changes the composition of the gas product, decreases the selectivity of vinyl acetylene and benzene, and increases the formation of methane and ethylene. Gas‐phase equilibrium may be approached between some components. The conversion of acetylene with argon dilution and low conversion was found to be of second order. Pyrolysis of pure acetylene at lower temperature and low conversion gave the rate constant k = 3.1 × 10⁹ · exp(?34.8/RT) L mol^?1 s^?1 with an activation energy of 34.8 kcal mol^?1. The initial reaction at 864 °C is a molecular formation of vinyl acetylene. The initial activation of acetylene in gas phase seems to be rate determining and of second order in acetylene. Decomposition of acetylene can take place both homogeneously and heterogeneously. Above a critical partial pressure of acetylene, the decomposition is apparently explosive with instant plugging of the reactor with carbon.     

Brominated Trihalomethylenones as Versatile Precursors to 3‐Ethoxy, ‐Formyl, ‐Azidomethyl, ‐Triazolyl,and 3‐Aminomethyl Pyrazoles

5‐Bromo[5,5‐dibromo]‐1,1,1‐trihalo‐4‐methoxy‐3‐penten[hexen]‐2‐ones are explored as precursors to the synthesis of 3‐ethoxymethyl‐5‐trifluoromethyl‐1H‐pyrazoles from a cyclocondensation reaction with hydrazine monohydrate in ethanol. 3‐Ethoxymethyl‐carboxyethyl ester pyrazoles were formed as a result of a substitution reaction of bromine and chlorine by ethanol. The dibrominated precursor furnished 3‐acetal‐pyrazole that was easily hydrolyzed to formyl group. In addition, brominated precursors were used in a nucleophilic substitution reaction with sodium azide to synthesize the 3‐azidomethyl‐5‐ethoxycarbonyl‐1H‐pyrazole from the reaction with hydrazine monohydrate. These products were submitted to a cycloaddition reaction with phenyl acetylene furnishing the 3‐[4(5)‐phenyl‐1,2,3‐triazolyl]5‐ ethoxycarbonyl‐1H‐pyrazoles and to reduction conditions resulting in 3‐aminomethyl‐1H‐pyrazole‐5‐carboxyethyl ester. The products were obtained by a simple methodology and in moderate to good yields.     

New reaction of thiocarbonyl ylides. Interaction ofS-alkyl-N,N-dimethylthiobenzimidium salts with activated acetylene derivatives leading to (E,E)-divinyl sulfides

The reaction of thiocarbonyl ylides with activated acetylene derivatives gives (E,E)-divinyl sulfides in good yields. The reaction mechanism is discussed and evidence in favor of the formation of a thiirane intermediate is presented. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 791–795, April, 1997.     

Nanospheres,Nanotubes, Toroids,and Gels with Controlled Macroscopic Chirality

The interaction of a highly dynamic poly(aryl acetylene) (poly‐ 1 ) with Li⁺, Na⁺_, and Ag⁺ leads to macroscopically chiral supramolecular nanospheres, nanotubes, toroids, and gels. With Ag⁺, nanospheres with M helicity and tunable sizes are generated, which complement those obtained from the same polymer with divalent cations. With Li⁺ or Na⁺, poly‐ 1 yields chiral nanotubes, gels, or toroids with encapsulating properties and M helicity. Right‐handed supramolecular structures can be obtained by using the enantiomeric polymer. The interaction of poly‐ 1 with Na⁺ produces nanostructures whose helicity is highly dependent on the solvation state of the cation. Therefore, structures with either of the two helicities can be prepared from the same polymer by manipulation of the cosolvent. Such chiral nanotubes, toroids, and gels have previously not been obtained from helical polymer–metal complexes. Chiral nanospheres made of poly(aryl acetylene) that were previously assembled with metal(II) species can now be obtained with metal(I) species.     

Nanospheres,Nanotubes, Toroids,and Gels with Controlled Macroscopic Chirality

The interaction of a highly dynamic poly(aryl acetylene) (poly‐ 1 ) with Li⁺, Na⁺_, and Ag⁺ leads to macroscopically chiral supramolecular nanospheres, nanotubes, toroids, and gels. With Ag⁺, nanospheres with M helicity and tunable sizes are generated, which complement those obtained from the same polymer with divalent cations. With Li⁺ or Na⁺, poly‐ 1 yields chiral nanotubes, gels, or toroids with encapsulating properties and M helicity. Right‐handed supramolecular structures can be obtained by using the enantiomeric polymer. The interaction of poly‐ 1 with Na⁺ produces nanostructures whose helicity is highly dependent on the solvation state of the cation. Therefore, structures with either of the two helicities can be prepared from the same polymer by manipulation of the cosolvent. Such chiral nanotubes, toroids, and gels have previously not been obtained from helical polymer–metal complexes. Chiral nanospheres made of poly(aryl acetylene) that were previously assembled with metal(II) species can now be obtained with metal(I) species.     

New processable polyaromatic ether–keto-sulfones curable by Diels-Alder cycloaddition

New Processable polyaromatic ether-keto-sulfones were prepared from the acid chloride of bis-m-carboxyphenyl acetylene (XII), isophthaloyl chloride (XX), diphenyl ether (XVIII), and 4,4′-diphenoxydiphenyl sulfone (XIX) in a Friedel-Crafts-type polymerization. These polymers were cured by Diels-Alder cycloaddition with 1,4-diphenyl-1,3-butadiene. The cured polymers showed an increase in T_g and in thermal and heat stabilities. The polymers form colorless, transparent, brittle films and can be cast into a glass fiber laminate. Both meta-and para-substituted acid chlorides of biscarboxyphenyl-1,3-butadiene yielded insoluble polymers under the same conditions but form processable polymers where combined with acetylene units in the polymer chain. Polymers that contained both acetylene and butadiene units were prepared but could not be cured by an intramolecular Diels-Alder cycloaddition reaction.     

Cyclotrimerization of acetylene by the tris(acetylacetonato)titanium(III)–diethylaluminum chloride system

Reaction of acetylene with tris(acetylacetonato)titanium(III) and diethylaluminum chloride system leads to formation of benzene, a trace of ethylbenzene, and a small amount of polyacetylene. The isotopic composition of products obtained from cyclotrimerization of acetylene-d₂ and an equimolar mixture of acetylene and acetylene-d₂ is investigated to elucidate the mechanism of the cyclotrimerization. The results suggest a mechanism in which an acetylene inserts into the metal—ethyl bond formed by reaction of Ti(acac)₃ and Al(C₂H₅)₂Cl, followed by insertion of two acetylene molecules and elimination of a hydrogen atom from the first inserted acetylene to yield an ethylbenzene and a metal hydride intermediate. The metal hydride intermediate catalyzes acetylene cyclotrimerization to give benzene. During the reaction, the hydrogen atom in the metal hydride intermediate does not exchange with the hydrogen atom in the inserted acetylene molecules.     

A new simple synthesis of soluble high molecular weight polyphenylenes by the cotrimerization of mono- and bifunctional terminal acetylenes

The monofunctional acetylenes, phenylacetylene and m-ethynyltoluene, were each copolymerized with diethynylbenzene in a 1:1 mole ratio by using TiCl₄/3AlEt₂Cl as cyclotrimerization catalyst. The aromatic polymers which were produced were polydisperse with a molecular weight of ～10,000. Variation of catalyst concentration had no effect on the molecular weight profile. An excess of bifunctional acetylene produced some insoluble gel but when some of the monofunctional acetylene was withheld and added only after an initial molecular weight build-up by the excess bifunctional acetylene, soluble polymers with molecular weights of approximately 50,000 were obtained in high yield, provided the overall ratio of mono- to bifunctional acetylene was maintained at 1:1. The resulting polyphenylenes were highly soluble in benzene and chlorinated solvents but gave brittle films. This was attributed to a highly branched structure resulting from a lack of specificity by the catalyst. Thermogravimetric analysis showed the polymers to have high thermal stability.     

Catalytic behavior of a polynuclear Mg-Mo complex and nitrogenase active site (FeMoco) isolated from the enzyme in reactions with C2H2, N2, and CO: A comparative study

In order to identify common and distinctive features in the catalytic behavior of natural and artificial nitrogen-fixation clusters, the kinetics of the catalytic reduction of C₂H₂ in the presence of Mg-Mo-cluster (1) was investigated and compared with the kinetics of acetylene reduction catalyzed by the cluster FeMoco (2) isolated from the enzyme nitrogenase we studied previously. The reactions were conducted in the presence of Zn/Hg and Eu/Hg as reducing agents and PhSH and C₆F₅SH as proton donors, i.e., under the same conditions as had been used in the case of 2. Both polynuclear Mg-Mo-complex and the europium amalgam-reduced FeMoco have multiple interdependent binding sites for substrates and/or inhibitors. Carbon monoxide inhibits the acetylene reduction much less efficiently in systems with cluster 1 than in systems with cluster 2, although the type of inhibition is mixed in both systems: CO binds to multiple sites of the cluster and affects both C₂H₂ complexation to the reduced cluster and decomposition of the catalyst-substrate complex to give the products. Unlike isolated FeMoco, the Mg-Mo-cluster efficiently catalyzes the reduction of molecular nitrogen. The reaction is greatly inhibited by acetylene, while no inhibiting effect of N₂ is observed in acetylene reduction, as was found earlier for a system with the natural cluster as the catalyst. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 766–774, May, 2006.     

Addition von Acetylendicarbonsäuredimethylester an Imidazole; Aminierung der Addukte: neue Synthesen von 3-(2-Imidazolyl)-2-pyridon-4,5-dicarbonsäureamiden und Pyrido[1,2-a]pyrazinen

The reaction between dimethyl acetylene dicarboxylate and 2-amino-1-methylimidazole affords dimethyl 2-amino-1-methyl-1,3-diazepine-5,6-dicarboxylate in low yield. This 1:1 – adduct was formed by addition of the acetylenic compound to the enamine double bond of the imidazole ring followed by ring enlargement. On the other hand, 2:1 – adducts to the imine bond are isolated in moderate yield when dimethyl acetylene dicarboxylate is treated with either 1-methyl-2-methylmercapto-imidazole or 1-methyl-2-methylmercapto-imidazoline. These adducts behave differently on heating with ethylamine: the adduct of the imidazole series cyclizes to the pyridone 15 with concomittant loss of one carboxamide group whereas that of the imidazoline series forms a pyrido[1,2-a]pyrazine derivative 20 , both in high yield. The possible reaction mechanisms are discussed. ¹³C–NMR.-spectroscopy and X-ray analysis were used in the determination of several structures.     

New processable polyaromatic amides curable by Diels-Alder cycloaddition

New processable polyaromatic amides were prepared from the acid chloride of bis-m-carboxyphenyl acetylene (V), the acid chloride of 1,4-bis-m-carboxyphenyl-1,3-butadiene (VI), and several aromatic diamines. The polyamides that contained acetylene units were cured by Diels-Alder cycloaddition reaction with 1,4-diphenyl-1,3-butadiene, whereas the polyamides with 1,3-butadiene units were cured with N-phenyl maleimide. Cured polyamides showed an increase in t_g, thermal, and heat stabilities. The polyamides can be cast into films and produce good glass-fiber laminates.     

Homobimetallic complexes containing Sn(IV) with acetylene dicarboxylic acid: their syntheses and structural interpretation by spectroscopic,semi-empirical,and DFT techniques

Homobimetallic carboxylates with general formulae (R₃Sn)_2?L (where R?=?Me, n‐Bu, Ph and L?=?acetylene dicarboxylate dianion) have been synthesized by refluxing disodium salt of acetylene dicarboxylic acid with triorganotin chlorides in 1?:?2 (L?:?M) molar ratio in methanol under reflux. These complexes have been characterized by elemental analyses, FTIR, and multinuclear NMR (¹H, ¹³C) spectroscopies. DFT calculations have been performed for structural elucidation and results were compared with semi‐empirical data. FTIR data indicate bidentate chelation of the ligand with tin and the complexes exhibit five‐coordinate geometry in the solid state. Such coordination behavior is also supported by DFT and semi‐empirical studies. NMR data confirm four‐coordinate geometry in solution.     

Alcohols,Ethers, and Esters with Peroxy Groups Prepared from 2-tert-Butylperoxy-2-methylpentan-4-one

2-tert-Butylperoxy-2-methylpentan-4-one reacts with butyllithium providing saturated tertiary peroxyalcohol, with 1-lithioalkynes, among them lithiooxy- and peroxy-containing, gives rise to the corresponding tertiary acetylene mono- and diperoxyalcohols and diols. The thermal stability of peroxides obtained was evaluated by derivatography.