Photodegradation of ethylene–octene copolymers with different octene contents

The influence of the octene content on the photodegradation behaviour of ethylene–octene copolymers (EOCs) was revealed by investigating the photooxidation of low density polyethylene (LDPE) and EOCs with different octene contents through a series of characterisation methods. LDPE was very sensitive to ultraviolet light and the photostabilities of EOCs decreased with increasing octene concentration. The photodegradation of all samples produced hydroxyl, carbonyl and vinyl groups. The ease of chain crosslinking and scission was increased as the octene content rose. Crosslinking predominated in late irradiation period of LDPE while chain scission was dominant in that of EOCs. Annealing and chain scission promoted the secondary crystallisation of the crystallisable chain segments. Chain scission enhanced the crystallisation ability of the irradiated EOCs while it decreased that of the weathered LDPE. The photostabilities of crystals could be ranked as follows: the chain-folded lamellar crystals > the bundled crystals > the fringed micellar crystals. The thermal stabilities and mechanical properties of samples decreased with increasing irradiation time and the decreasing extent was correlated with the comonomer content.     

Quantitative evaluation of photodegradation and racemization of poly(l-lactic acid) under UV-C irradiation

To obtain details of poly(l-lactic acid) (PLLA) photodegradation behavior, PLLA films were irradiated by UV-C light (λ = 253.7 nm) to directly excite carbonyl groups, resulting in a rapid decrease in the molecular weight accompanying a gradual decrease in the optical purity of monomeric units in the chains. The racemization during the photodegradation was first detected as a result of the chain scission by irradiation. From quantitative analyses of the molecular weight and the monomeric unit composition, it was found that the chain scission ratio and the d-lactate unit ratio increased in parallel during the irradiation, suggesting that approximately one d-lactate unit formed for every chain scission. From a mechanistic consideration, the racemization equilibrium was proposed to occur at both carboxyl and hydroxyl chain ends.     

Temperature effects on radiation induced phenomena in polytetrafluoroetylene (PTFE)-Change of G-value

Temperature dependencies on the radiation induced phenomena and G-value of polytetrafluoroethylene (PTFE) have been studied in a temperature range 77–653 K. It is well known that main chain scission occurs very effectively below the melting temperature of PTFE (600 K). We have found in our experiments that G-value of chain scission increases significantly with increasing irradiation temperature, until 600 K. In addition to that, we have realized that crosslinking occurs by irradiation in the molten state at 613 K (Tabata, 1992; Oshima et al., 1995; Tabata et al., 1996). In the molten state, G-value of crosslinking was found to be 0.35 (number of crosslinking/100 eV absorption), as a lower limit, and the apparent G-value of chain scission is drastically reduced. Above 633 K, radiation induced crosslinking mainly occurs, however parallel thermal depolymerization or decomposition takes place to some extent.     

Surface activity of commercial food grade modified starches

An attempt to quantitative evaluation of the functionality of food grade chemically modified starches in the emulsion systems by estimation of their surface activity as well as the capability of thickening food products was the main purpose of this present work. It was stated that chemically modified starches reveal higher surface activity at air/water and toluene/water interfaces in comparison to the native starch. The increase of the degree of substitution of polar carboxyl groups as well as rather non-polar acetyl ones results in an enhance of surface activity. Starch sodium octenylsuccinate stands out from other investigated starches, in its excellent capability of lowering surface and interfacial tension. Cross-linked starches reveal excellent stabilisation activity at a pH range of 5.5–7.0 but their surface activity is lower than those of other modified starches. Acetylated starch as well as starch sodium octenylsuccinate reveal satisfactory thickening capability up to pH 4.5 and moreover their surface activity (especially of E 1450) allows us to recommend them as functional constituents of food emulsions. Low thickening capability of oxidised starches rather excluded these derivatives from the group of potential functional additives for food emulsions.     

Fourier transform infrared investigation of the effects of irradiation on the 19 and 30°C phase transitions in polytetrafluoroethylene

Fourier transform infrared spectroscopy has been used in conjunction with differential scanning calorimetric measurements to investigate the nature of molecular degradation and its effect on the phase transition temperatures in irradiated polytetrafluoroethylene (PTFE). Both the 19 and 30°C transitions are observed to exhibit similar shifts to low temperatures upon irradiation. Infrared absorbance subtraction data from irradiated PTFE indicate a continual decrease in sample crystallinity accompanied by an increase in the number of free and bonded ? COOH groups with increasing dose consistent with molecular degradation by chain scission. By comparing infrared band intensities on a number of irradiated PTFE samples with those from short chain perfluoro n-alkanes, it was determined that the overall reduction in chain length caused by irradiation was primarily responsible for the observed reduction in both phase transition temperatures.     

Enzymatic chain scission kinetics of poly(epsilon-caprolactone) monolayers

The hydrolytic and enzymatic degradation behavior of poly(epsilon-caprolactone) (PCL) is investigated using the Langmuir monolayer technique, and an improved data acquisition and data reduction procedure is presented. Hydrolytic and enzymatic monolayer degradation experiments of PCL with various molecular weights by Pseudomonas cepacia lipase have been carried out to analyze the influence of subphase pH, subphase temperature, enzyme concentration, and the packing density of polymer chains on the degradation kinetics. The enzymatic monolayer degradation results in an exponential increase in the number of dissolved degradation fragments with increasing degradation time, which confirms random chain scission to be the dominant scission mechanism. The increase in the enzymatic scission rate constant with decreasing initial average molecular weight of the polymers is assigned to the influence of the area density of polar terminal groups on the substrate-enzyme complex formation.     

Dielectric relaxation behavior of ternary systems of water/toluene/Triton X-100: the effects of water and oil contents on microemulsion structure

Dielectric relaxation studies were conducted on the ternary systems of the nonionic surfactant Triton X-100 (a nonionic surfactant with a polyoxyethylene chain)/toluene/water in the frequency range from 40 Hz to 110 MHz. The contents of water and toluene were varied separately while the ratios of the other two components were fixed. Remarkable dielectric relaxations were observed around 1 MHz and dielectric intensity shows different variation with the increase of the contents of water or toluene. Dielectric parameters were obtained by fitting the data using the Cole–Cole equation with one dispersion term. The reverse micelles, water-in-oil, and oil-in-water micro-regions of the microemulsions were identified by the dependence of conductivity of the dispersed phase and continuous phase on the contents of water or toluene. Hanai theory and the corresponding analysis method were used to calculate the phase parameters of the constituent phases. The analysis results suggest that the dielectric relaxation probably arises from the interfacial polarization.     

The structure of electron beam-modified poly(ethylene terephthalate) films

The effect of electron-beam irradiation on the surface properties and the parameters of the semicrystalline structure of biaxially oriented poly(ethylene terephthalate) (PET) films was studied. It was shown that the crystallinity and the surface tension of the irradiated films at the interfaces with isooctane and water vary in a nonmonotonic manner over the dose range D= 25–300 kGy. As the absorbed dose increases, the dispersion and polar terms of surface energy increase, exhibiting an extremum as a result of the competing chain crystallization and amorphous-phase formation processes, as well as oxidative degradation and crosslinking of PET samples.     

Regioselective C−H Xanthylation as a Platform for Polyolefin Functionalization

Polyolefins that contain polar functional groups are important materials for next‐generation lightweight engineering thermoplastics. Post‐polymerization modification is an ideal method for the incorporation of polar groups into branched polyolefins; however, it typically results in chain scission events, which have deleterious effects on polymer properties. Herein, we report a metal‐free method for radical‐mediated C?H xanthylation that results in the regioselective functionalization of branched polyolefins without coincident polymer‐chain scission. This method enables a tunable degree of polymer functionalization and capitalizes on the versatility of the xanthate functional group to unlock a wide variety of C?H transformations previously inaccessible on branched polyolefins.     

Temperature influence on the stability and chemical composition of electron beam‐irradiated polytetrafluoroethylene

Polytetrafluoroethylene powder (PTFE) was exposed to electron beam radiation in presence of air. The irradiation mainly resulted in chain scission and induction of oxygenated groups and radicals as well as unsaturation. The thermal behavior of the irradiated PTFE and the fate of the radicals were studied comprehensively. Apart from fluorine, saturated and unsaturated fluorocarbons and oxygen‐containing groups were released during heating. Furthermore, irradiation‐generated peroxy radicals were transformed into alkyl radicals in a partly reversible process. A proposal for the complex reaction mechanisms of irradiated PTFE is given. The thermal stability of irradiated PTFE was improved by annealing. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2404–2411, 1999     

Degradation of β-Tritiated Polystyrene by Self-Irradiation

β-Tritiated polystyrene undergoes decomposition due to seif- irradiation. The effects of irradiation in air and high vacuum at 25°C were studied and simultaneous chain scission and cross-linking were observed under both conditions. Analyses of gaseous products and polymer residues were carried out. Hydrogen was the only product of vacuum irradiation while water, formaldehyde, benzaldehyde, styrene and hydrogen were formed on irradiation in air. Possible mechanisms of degradation are discussed.     

Optical and microstructural studies on electron irradiated PMMA: A positron annihilation study

The effect of electron irradiation on the free volume related microstructural and optical properties of Poly(methyl methacrylate) have been studied using Positron Annihilation and other techniques. The FTIR spectral study on the irradiated films suggests the existence of CC group and is understood by invoking the carbonaceous clusters as a consequence of chain scission in PMMA. Using UV-Visible absorption spectra the optical parameters like optical energy bandgap and activation energy were determined and the variation of these parameters suggests the existence of defects within the irradiated sample. Following Robertson’s theory, the carbonaceous cluster size is estimated and it increases with increase in electron dose. The XRD study indicates the enhancement of amorphous nature of the film due to chain scission by irradiation. The Positron annihilation result shows that electron irradiation affects the free volume related microstructure and the carbonaceous clusters may act as positron scattering centers.     

Ozonation of hydrocarbon diene elastomers: A mechanistic study

A study of the effects of ozonation on polybutadiene, polyisoprene, and several related hydrocarbon elastomers has shown that elastomers containing di-substituted double bonds (e.g., cis-1,4-polybutadiene) give crosslinked products as well as chain scission products in nonpolar solvents, whereas those containing tri-substituted double bonds (e.g., cis-1,4-polyisoprene) give chain scission products only. Both types of elastomer, however, give only chain scission products in polar solvents. Further investigation of the ozonation of elastomers, including the effect of ozonides of monoolefins and the solvent effect has led us to postulate that the chain scission involves the attack of a second ozone molecule on the preformed ozonide, and, the crosslinking is due to the attack of the biradical carbonyl oxide on the rubber.     

Radiation aging and chemi-crystallization processes in polyoxymethylene

The radiochemical degradation of a polyoxymethylene homopolymer (POM) was used to study the effects of molar mass changes in the crystalline structure. The dose rate was 20 kGy h⁻¹ with doses of up to 30 kGy used. Both WAXS and SAXS were used to analyse the structures. Results showed that, under irradiation, the polymer undergoes random chain scission. The radiochemical yield was found to be G = 1.6 chain scission events per 100 eV. It was found that no crosslinking occurs and that only one chain scission mechanism, leading to the formation of formate groups, operates. Proof for the existence of chemi-crystallization is evidenced by (i) an increase in the crystallinity ratio as well as (ii) a decrease in the amorphous layer thickness. Simple models, derived from Rault’s theory, are used to predict both (i) and (ii) from molar mass values.     

聚甲基丙烯酸甲酯辐射裂解和消旋的空间立构效应

本文研究了三种不同空间立构聚甲基丙烯酸甲酯的辐射效应,提出裂解过程是一种裂解与重合的动态平衡过程。分子量降低和消旋作用对温度的依赖性,是由于分子运动和笼罩效应以及重合的空间位阻效应所致。辐照温度愈高,裂解产额愈大。相同条件下辐照,全同立构比无规立构试样的裂解产额更大。 全同立构聚甲基丙烯酸甲酯辐照后,不仅分子链断裂,而且空间立构也发生很大变化。随着辐照剂量的增加,全同立构含量逐渐减少,而无规立构含量和间同立构含量却逐渐增加。     

Mechanical properties,surface chemistry,and barrier characteristics of electron beam irradiated‐annealed LDPE/PA6/LDPE multi‐layer films at N2

The effects of electron beam irradiation in the nitrogen environment, on chain scission, crosslinking, crystallinity, mechanical performance, and barrier properties of LDPE/PA6/LDPE multi‐layer films were studied. The evaluation of radiation‐induced crosslinking effect by the gel content measurement and Charlesby–Pinner plot suggested more of crosslinking over chain scission, in all the layers, which was more pronounced in polyethylene phase. The FTIR analysis results showed good agreement with those observed by the gel content measurements. It is believed that the crosslinking reaction had occurred through the C? N bonds in polyamide‐6, and vinyl group in polyethylene layers. The evaluation of radiation effect on the crystallinity and crosslinking of films by FTIR technique showed that by increasing the applied doses, the crystallinity in all the layers was decreased and the crosslinking was increased. The differential scanning calorimetry of irradiated samples revealed that due to the crosslinking reaction, the crystallinity was decreased by the applied dose. The tensile strength of the films was increased and the percent elongation at break was decreased, by increasing the applied doses. This study was also indicated that the radiation‐induced crosslinking effect on the tensile properties was dominantly observed up to 50 kGy. The surface free energy analysis of the films using the contact angle measurement and geometric mean equation indicated that the surface polarity was decreased by increasing the absorbed doses. It was found that due to the decline in the surface polarity and the simultaneously formation of crosslinked network in these films, both water vapor transmission rate and oxygen permeability were significantly decreased. Copyright © 2009 John Wiley & Sons, Ltd.     

Degradation and stability of polyaniline on exposure to electron beam irradiation (structure-property relationship)

Polyaniline (PAni) was prepared by electrochemical polymerization and subjected to different doses of electron beam (EB) irradiation. The effect of EB irradiation causes both chain scission and cross-linking process in PAni, which depends on irradiation dose. The degree of chain scission and cross-linking in PAni by EB irradiation is characterized through XRD, TGA, DSC, solubility, EPR and electrical properties measurement. The results reveal that with increase in EB irradiation dose from 0 to 150 kGy DC and AC conductivity and dielectric constant are found to increase mainly due to the chain scission or further doping in PAni. Due to irradiation there is change in the structure of PAni, such as decrease in the d-spacing, inter-chain separation, thermal stability and T_g but increase in the percent crystallinity and solubility. With further increase in the EB irradiation dose from 150 kGy onwards the DC and AC conductivity and dielectric constant are decreased due to the cross-link formation or dedoping in PAni, which causes the decrease in percentage of crystallinity and solubility and increase in d-spacing, inter-chain separation, thermal stability and T_g of PAni.     

Mechanical degradation of polypropylene solutions under large pressure drops

The degradation of polypropylene (PP), dissolved in n‐alkanes at high temperatures and pressures, during the solution discharge to ambient conditions was experimentally studied. Molecular weight distributions (MWD) of the solubilized PP were measured by gel permeation chromatography. The MWD curves of PP obtained after discharge of the polymer solution shift to the low molecular weight side of the distribution and the polydispersity is reduced. In this work, a systematic study on the discharge products was performed to elucidate the degradation mechanism and the effects of temperature and concentration on this phenomenon. Initially, pure polymers, PP and polystyrene (PS) were studied varying the solution temperature. In a second stage, the effect of polymer concentration on chain scission was assessed using experiments on physical blends of PP/PS. In all cases, thermal and oxidative degradation were previously analyzed. Mechanical degradation was found to be the main chain scission mechanism. A negative linear functionality of the chain scission was found in both temperature and polymer concentration. To analyze the relationship between polymer degradation and molecular weight, the chain scission distribution function was calculated. On this basis, a critical molecular weight for the beginning of chain scission was obtained. This value is a function of temperature but remains constant with concentration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 455–465, 2007     

Profile of oxidation in irradiated polyethylene

Following gamma irradiation in air which causes bond scission and yields large concentrations of peroxy radicals, maximum oxidation and an increase in crystallinity occurs on the surface of ultrahigh molecular weight polyethylene. Here, bimolecular reactions of peroxy radicals generate carbonyls, mostly ketones. On the polymer surface, peroxy radicals continue to react over time periods of years to generate carbonyls and chain scission. Peroxy radicals in the interior of the polymer abstract hydrogens and form hydroperoxides, inducing chain reactions and a slow but continue increase of ketone. Within the polymer sample, to a decreasing depth with increasing dose, a reduced concentration of oxygen is available to react with radiolytic radicals, so that more efficient crosslinking and a low level of hydroperoxide chain reaction occur. After long periods of time a surface maximum in carbonyl concentration is produced. Heating polyethylene in high pressures of oxygen accelerates the oxidative process. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 329–339, 1998     

Chain-length dependence of the antifouling characteristics of the glycopolymer-modified polypropylene membrane in an SMBR

Membrane-bioreactor processes have increased considerably in recent years. However, the natural disadvantages of common membrane materials, such as hydrophobic surface, cause membrane fouling and cumber further extensive applications. In this work, hydrophilic surface modification of polypropylene microporous membranes was carried out by the sequential photoinduced graft polymerization of d-gluconamidoethyl methacrylate (GAMA) to meet the requirements of wastewater treatment and water reclamation applications. The grafting density and grafting chain length were controlled independently in the first and second step, respectively. Attenuated total reflection–Fourier transform infrared spectroscopy (FT-IR/ATR) and X-ray photoelectron spectroscopy (XPS) were employed to confirm the surface modification on the membranes. Water contact angle was measured by the sessile drop method. Results of FT-IR/ATR and XPS clearly indicated that GAMA was grafted on the membrane surface. It was found that the grafting chain length increased reasonably with the increase of the UV irradiation time. Water contact angle on the modified membrane decreased with the increase of the grafting chain length, and showed a minimum value of 43.2°, approximately 51.8° lower than that of the unmodified membrane. The pure water fluxes for the modified membranes increased systematically with the increase of the grafting chain length. The effect of the grafting chain length on the antifouling characteristics in a submerged membrane-bioreactor for synthetic wastewater treatment was investigated. After continuous operation in the submerged membrane-bioreactor for about 70 h, reduction from pure water flux was 90.7% for the virgin PPHFMM, and ranged from 80.8 to 87.2% for the modified membranes, increasing with increasing chain length. The flux of the virgin PPHFMM membrane after fouling and subsequent washing was 31.5% of the pure water flux through the unfouled membrane; for the modified membranes this ranged from 27.8 to 16.3%, decreasing with increasing chain length. These results demonstrated that the antifouling characteristics for the glucopolymer-modified membranes were improved with an increase in GAMA chain length.