Swelling and thermodynamic studies of temperature responsive 2-hydroxyethyl methacrylate/itaconic acid copolymeric hydrogels prepared via gamma radiation

The copolymeric hydrogels based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) were synthesized by gamma radiation induced radical polymerization. Swelling and thermodynamic properties of PHEMA and copolymeric P(HEMA/IA) hydrogels with different IA contents (2, 3.5 and 5 mol%) were studied in a wide pH and temperature range. Initial studies of so-prepared hydrogels show interesting pH and temperature sensitivity in swelling and drug release behavior. Special attention was devoted to temperature investigations around physiological temperature (37 °C), where small changes in temperature significantly influence swelling and drug release of these hydrogels. Due to maximum swelling of hydrogels around 40 °C, the P(HEMA/IA) hydrogel containing 5 mol% of IA without and with drug-antibiotic (gentamicin) were investigated at pH 7.40 and in the temperature range 25–42 °C, in order to evaluate their potential for medical applications.     

Uranyl ion uptake capacity of poly (N-isopropylacrylamide/maleic acid) copolymeric hydrogels prepared by gamma rays

The effect of gel composition, absorbed dose and pH of the solution on the uranyl ion uptake capacity of N-isopropylacrylamide/maleic acid copolymeric hydrogels containing 0–3 mol% of maleic acid at 48 kGy have been investigated. Uranyl uptake capacity of hydrogels are found to increase from 18.5 to 94.8 mg [UO₂²⁺]/g dry gel as the mole % of maleic acid content in the gel structure increased from 0 to 3. The percent swelling, equilibrium swelling and diffusion coefficient values have been evaluated for poly(N-isopropylacrylamide/maleic acid) hydrogels at 500 ppm of uranyl nitrate solution.     

Adsorption of Apollo reactive dyes on poly(N,N dimethylamino ethylmethacrylate) hydrogels

Poly(N,N-dimethylamino ethylmethacrylate) [P(DMAEMA)] hydrogels were prepared by irradiating the ternary mixtures of dimethylamino ethylmethacrylate (DMAEMA)/ethyleneglycol dimethacrylate (EGDMA)/water (H₂O) by γ-rays at ambient temperature. The swelling of four types of DMAEMA hydrogels in distilled water is higher than the swelling of these hydrogels in dye solutions. The value of equilibrium swelling of P(DMAEMA)1 hydrogel was 338% at pH 7.0 in distilled water, while it was 325% and 326% at pH 7.0 in Apollofix Red (AR) and Apollofix Yellow (AY) solutions, respectively. The adsorption capacity of P(DMAEMA)1 hydrogel was found to increase from 85 to 131 mg for AR g⁻¹ dry gel and from 58 to 111 mg for AY g⁻¹ dry gel with decreasing pH of the dye solutions.     

γ-irradiated chitosan-polyvinyl pyrrolidone hydrogels as pH-sensitive protein delivery system

The effects of pH of the buffer solution and the composition of the hydrogel system on the bovine serum albumin (BSA) adsorption capacity of chitosan (CS)–polyvinyl pyrrolidone (PVP) (CSPVP) hydrogels and release of BSA were investigated. Poly-electrolyte CSPVP hydrogels with different compositions were prepared by irradiating CS/PVP/water mixtures with γ-rays at ambient temperature. The adsorption capacity of hydrogels was found to increase from 0 to 350 mg BSA/g dry gel, by changing external stimuli and hydrogel composition. The adsorption of BSA within CSPVP hydrogels increased with increase in CS content in the hydrogels. When the irradiation doses of hydrogel increased, the adsorption of BSA decreased. The maximum adsorption of BSA was observed at pH 5. A significant amount of the adsorbed BSA (up to 95%) was eluted in the phosphate medium containing 0.1 M NaCl at pH 7.4.     

Radiation synthesis of superabsorbent polyethylene oxide/tragacanth hydrogel

A new superabsorbent hydrogel has been prepared from tragacanth and polyethylene oxide (PEO) by gamma radiation at room temperature. Tragacanth solutions with different concentrations (1%, 3% and 5%) have been blended with 5% aqueous solution of PEO at a ratio of 1:1 and irradiated at doses 5–20 kGy. The properties of the prepared composite hydrogels were evaluated in terms of the gel fraction and the swelling behavior. An unexpected growth of the gel fraction was observed in PEO/tragacanth hydrogels irradiated at 5 kGy. Incorporation of 5% tragacanth into the aqueous PEO increased significantly the swelling percent of the hydrogels to more than 14,000% and thus makes it a superabsorbent material.     

Low-molecular-weight gelators based on Nα-acetyl-Nε-dodecyl-L-lysine and their amphiphilic gelation properties

A simple amphiphilic low-molecular-weight gelator based on L-lysine, N^α-acetyl-N^ε-lauroyl-L-lysine (1), its alkali metal salts [Na (2) and K (3)], and two-component gelators [1 and 2 and 1 and 3] were synthesized. Compound 1 had a good hydrogelation ability that formed a pure water gel at 2 g L^?1 (0.2 wt.%) and a saline gel at 4 g L^?1 (0.4 wt.%). Two-component compounds were able to form hydrogels in aqueous solutions containing alkali metal and alkali earth metal ions in addition to pure water and saline. Although 1 formed organogels in a few organic solvents, two-component compounds also functioned as a good organogelator. The FT-IR study indicated that the driving forces for the formation of supramolecular gels were hydrogen-bonding and hydrophobic interactions. Furthermore, the thermal properties of the hydrogels are discussed.     

Effects of PVA,agar contents,and irradiation doses on properties of PVA/ws-chitosan/glycerol hydrogels made by γ-irradiation followed by freeze-thawing

Poly(vinyl alcohol) (PVA)/water soluble chitosan (ws-chitosan)/glycerol hydrogels were prepared by γ-irradiation and γ-irradiation followed by freeze-thawing, respectively. The effects of irradiation dose and the contents of PVA and agar on the swelling, rheological, and thermal properties of these hydrogels were investigated. The swelling capacity decreases while the mechanical strength increases with increasing PVA or agar content. Increasing the irradiation dose leads to an increase in chemical crosslinking density but a decrease in physical crosslinking density. Hydrogels made by irradiation followed by freeze-thawing own smaller swelling capacity but larger mechanical strength than those made by pure irradiation. The storage modulus of the former hydrogels decreases above 50 °C and above 70 °C it comes to the same value as that prepared by irradiation. The ordered association of PVA is influenced by both chemical and physical crosslinkings and by the presence of ws-chitosan and glycerol. These hydrogels are high sensitive to pH and ionic strength, indicating that they may be useful in stimuli-responsive drug release system.     

Swelling characteristics and application of gamma-radiation on irradiated SBR-carboxymethylcellulose (CMC) blends

Blends of styrene butadiene rubber (SBR) with varying loading degree from 60 wt% to 100 wt% of carboxymethylcellulose (CMC) have been prepared. Gamma radiation vulcanization of prepared blends was carried out with doses varying between 50 kGy and 250 kGy. Mechanical properties, namely, tensile strength (Ts), elongation at break (E_b) and hardness were followed up as a function of loading degree of CMC and gamma irradiation dose. Moreover, physical properties, specifically swelling number (SN) and gel fraction % (GF%) were undertaken. Results obtained showed an improvement in mechanical as well as in physical properties with increasing either CMC content or dose of irradiation. Thermal properties namely thermo gravimetric analysis (TGA) was carried out.     

Curcumin-loaded layer-by-layer folic acid and casein coated carboxymethyl cellulose/casein nanogels for treatment of skin cancer

Targeted drug delivery systems using natural polysaccharide/protein biopolymer for tumor cells are an attractive platform for enriching the therapeutic effects and reducing the side effects of the drug. Carboxymethyl cellulose (CMC) and casein (CA) nanogels (NGs) loaded with curcumin (CUR) were prepared by self-assembly method and fabricated with folic acid (FA) and casein using layer-by-layer (LbL) technique for skin cancer drug delivery. The prepared samples were characterized by techniques like zeta potential, FTIR, XRD, TGA and Cryo-SEM. Both the swelling and in vitro drug release was performed in acidic pH (4.5 and 6.8) and physiological pH 7.4. Hemolysis assays demonstrated that the drug carriers are hemocompatible. Confocal microscope studies indicate facilitated uptake of 2-FA/CA/CUR@CMC-CA NGs in MEL-39 melanoma cancer cell line, which in turn result in a higher potential for apoptosis. Compared to pure CUR and CUR@CMC-CA NGs, the 2-FA/CA/CUR@CMC-CA NGs has lower IC50 value and superior cytotoxicity in MEL-39 cells because of folate-receptor mediated endocytosis evaluated by the cellular viability quantification using MTT assay and optical microscope images. Finally from in vitro skin permeation experiments, 2-FA/CA/CUR@CMC-CA NGs showed 3.47 ± 0.03 to 4.15 ± 0.25 μg/ml CUR concentrations at the stratum corneum, epidermal and dermal layers. Overall, our results put forth 2-FA/CA/CUR@CMC-CA NGs as an aspiring candidate to achieve enhanced anticancer effects against melanoma skin cancer.     

Studies on radiation synthesis of polyethyleneimine/acrylamide hydrogels

Polyethyleneimine(PEI)/acrylamide(AAM) hydrogels were synthesized by γ-radiation-induced polymerization/crosslinking of aqueous mixtures containing different ratios of PEI and AAM. The gel percentage and equilibrium degree of swelling (EDS) of the synthesized hydrogels were investigated. The compositions of the hydrogels produced were found to be different from the feed composition. Ion-chromatography technique was used to determine the amount of Pb (II) and Cd (II) absorbed by the hydrogel. The maximum binding capacity of the PEI/AAM hydrogels, for Pb and Cd was found to be 19 and 12.6 mg/g, respectively, (at 100 ppm). PEI/AAM hydrogels had better metal uptake efficiency than the pure AAM hydrogel at concentrations less than 50 ppm. Pure PEI was observed to be highly degrading type polymer on exposure to gamma radiation. TGA and FT-IR techniques were used to characterize the prepared hydrogels.     

Triplet-sensitized photolysis of alkoxycarbonyl azides in solution and matrices

Photolysis of azides 1–4 in methanol, which have a built-in intramolecular triplet sensitizer, yields mainly carbamates 5–8. Laser flash photolysis of 1–4 shows formation of their triplet-excited ketone, which decays by intramolecular energy transfer to form triplet nitrenes 1n–4n. Irradiating 1–3 in matrices yields isocyanic acid, whereas photolysis of 4 forms isocyanate 4i. The depletion rate of the azide bands between 2100 and 2200 cm^?1 is different than the rate of formation for the isocyanic acid bands at ～2265 cm^?1; thus, the formation of isocyanic acid is a stepwise process. Irradiating 1 in matrices produces an absorption band due to nitrene 1n (λ_max ～ 343 nm), which is depleted upon further irradiation, whereas the absorption due to 4-acetyl benzaldehyde (λ_max ～ 280 nm) increases with prolonged irradiation. We propose that formation of isocyanic acid in matrices must come from secondary photolysis of nitrenes 1n–3n. This mechanism is further supported by calculation, which show that the estimated transition state for 1n–4n to fall apart to yield alkoxy and cyanato radicals is only ～34 kcal/mol above the ground state of the triplet nitrenes and thus the cleavage can take place photochemically. Thus, nitrenes 1n–4n can be formed selectively, but these intermediates are highly photosensitive and undergo secondary photolysis in matrices.     

Influence of dissolution processing of PVA blends on the characteristics of their hydrogels synthesized by radiation—Part I: Gel fraction,swelling, and mechanical properties

In this work several hydrogels were obtained with two different poly(vinyl alcohol)s/PVAs as the main polymer in aqueous solutions containing 10% of PVA, 0.6% of agar, and 0.6% of κ-carrageenan (KC), cross-linked by gamma-rays from a ⁶⁰Co irradiation source. The PVAs tested have different degrees of hydrolysis and viscosities at 4% with values closed to 30 mPa s. The aqueous polymeric solutions were prepared using two distinct processes: the simple process of heating–stirring and that of making use of an autoclave. The purpose of this study was to evaluate the influence of the dissolution process by means of both methods on the hydrogels’ properties obtained. These were investigated by means of degree of cross-linking/gel fraction, degree of swelling in water, and some mechanical properties. The results that are obtained for hydrogels synthesized from solutions of PVA, agar, KC, and blends thereof prepared by both dissolution processes showed higher degrees of swelling for hydrogels from the autoclaved polymer solutions than those from the solutions prepared by simple heating–stirring process. Furthermore, their hydrogels containing totally hydrolyzed PVA displayed higher tensile strength and lower elongation properties.     

Versatile Ru-based metathesis catalysts designed for both homogeneous and heterogeneous processes

The synthesis of new ruthenium-based catalysts applicable for both homogeneous and heterogeneous metathesis is described. Starting from the Hoveyda-Grubbs first generation (1) and the Hoveyda-Grubbs second generation (2) catalysts the homogeneous catalysts [RuCl((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(SIMes)] (4: R = Et, R′ = H; 5: R = R′ = Me) (SIMes = 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene) were prepared by substitution of one chloride ligand with trialkoxysilyl functionalized silver carboxylates (RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COOAg (3a: R = Et, R′ = H; 3b: R = R′ = Me). These homogeneous ruthenium-species are among a few known examples with mixed anionic ligands. Exchange of both chloride ligands afforded the catalysts [Ru((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(SIMes)] (9: R = Et, R′ = H; 11: R = R′ = Me) and [Ru((RO)₃Si–C₃H₆–N(R′)–CO–C₃F₆–COO)(CH–o-O–iPr–C₆H₄)(PCy₃)] (8: R = Et, R′ = H; 10: R = R′ = Me). The reactivity of the new complexes was tested in homogeneous ring-closing metathesis (RCM) of N,N-diallyl-p-toluenesulfonamide and TONs of up to 5000 were achieved. Heterogeneous catalysts were obtained by reaction of 4, 5 and 8–11 with silica gel (SG-60). The resultant supported catalysts 4a, 5a, 8a–11a showed reduced activity compared to their homogenous analogues, but rival the activity of similar heterogeneous systems.     

Electronic absorption study on acid–base equilibria for some pyrimidine derivatives containing semi- and thiosemicarbazone moiety

The UV–vis spectra of recently synthesized 5-benzoyl-1-(methylphenylmethyleneamino)-4-phenyl-1H-pyrimidine-2-one, (I), and 5-benzoyl-1-(methylphenylmethyleneamino)-4-phenyl-1H-pyrimidine-2-thione, (II) were studied in aqueous methanol (5%, v/v methanol). The nature of the electronic transitions and the roles of carbonyl oxygen of I and thiocarbonyl sulfur of II on the behavior of UV–vis spectra were discussed.Acid–base equilibria of the compounds against varying pH and pK_a values related equilibria were determined at an ionic strength of 0.10 M by using the Henderson–Haselbalch equation. The mean acidity constants for the protonated forms of the compounds were determined as pK_a1 = 5.121, pK_a2 = 7.929 and pK_a3 = 11.130 for I and pK_a1 = 4.684, pK_a2 = 7.245 and pK_a3 = 10.630 for II. The preferred dissociation mechanisms were discussed based on UV–vis data and a mechanism was proposed for each compound.     

Pilot scale-up and shelf stability of hydrogel wound dressings obtained by gamma radiation

This study is aimed of producing pilot batches of hydrogel wound dressings by gamma radiation and evaluating their shelf stability. Six batches of 3L capacity were prepared based on poly(vinyl pyrrolidone), agar and polyethylene glycol and they were dispensed in polyester trays, covered with polyester films and sealed in two types of materials: polyethylene bags and vacuum polyethylene bags. Dressings were formed in a single step process for the hydrogel formation and sterilization at 25–30 kGy gamma radiation dose in a JS-9500 Gamma Irradiator (Nordion, Canada). The six batches were initially physicochemical characterized in terms of dimensions and appearance, gel fraction, morphology analysis, hydrogel strength, moisture retention capability and swelling capacity. They were kept under two storage conditions: room temperature (T: 30±2 °C/RH: 70± 5%) and refrigerated temperature (T: 5±3 °C) during 24 months and sterility test was performed. The appearance of membranes was transparent, clear, uncut and flexible; the gel fraction of batches was higher than 75% and the hydrogel surface showed a porous structure. There was a slow decrease of the compression rate 20% until 7 h and about 70% at 24 h. Moisture retention capability in 5 h was similar for all the batches, about 40% and 60% at 37 °C and at room temperature respectively. The swelling of hydrogels in acidic media was strong and in alkaline media the weight variation remains almost stable until 24 h and then there is a loss of weight. The six batches remained sterile during the stability study in the conditions tested. The pilot batches were consistent from batch to batch and remained stable during 24 months.     

Anticancer and antimicrobial evaluation of newly synthesized steroidal 5,6 fused benzothiazines

A series of new 5α-cholestano [5,6-b] benzothiazines (4–6) has been synthesized by the reaction of 5α-cholestan-6-one (1–3) with 2-aminothiophenol in the presence of iodine. The structures of newly synthesized compounds have been established on the basis of spectral and analytical data. Compounds (1–6) were screened for in vitro anticancer activity against the human cancer cell lines; SW480 (colon adenocarcinoma cells), A549 (lung carcinoma cells), HepG2 (hepatic carcinoma cells) and HeLa (cervical cancer cells) using MTT assay during which the products (4–6) showed marked increase in anticancer activity and in particular, compound 6 showed IC₅₀ = 13.73 μmol L⁻¹ against HeLa cells, being more effective than Doxorubicin against the same cells. Compounds 4 and 6 also showed minimum IC₅₀ of 15.83 μmol L⁻¹ and 16.89 μmol L⁻¹ against HepG2 and A549 cells, respectively. Compounds (1–6) were also tested for in vitro antimicrobial activity against different bacterial as well as fungal strains during which newly synthesized compounds (4–6) were found more potent than starting compounds (1–3). Compound 4 was found to be more potent than the reference drug, Chloramphenicol, in the case of Escherichia coli while compound 5 was found almost equally potential antifungal agent against P. marneffei in comparison with the reference drug, Nystatin.     

Cross-linking of poly(N-vinyl pyrrolidone) films by electron beam irradiation

Biocompatible hydrogels based on poly(N-vinyl pyrrolidone) (PVP) were synthesized by electron beam irradiation of the dry polymer under various conditions. Sol–gel analysis of the bulk gel (in mm range) gave a dose of gelation of 94 kGy. As seen for various other polymers, the network density rises with the increase in dose. At around 350 kGy, PVP began to decompose. Based on these observations, films in μm range on a silicon wafer were synthesized by electron beam irradiation. Due to irradiation, the films adhered irreversibly on the wafer. Their swelling behavior was analyzed by ellipsometry.     

AM1 and DFT study of polarizability of nitrogen-containing octatetraene with donor substituents: Comparative investigation

We report density functional theory (DFT) studies of the dipole polarizabilities of nitrogen-containing octatetraene with a number of Π-electron donor substituent at the end parts. All geometries were optimized at the B3LYP/6-311++G(d,p) level of theory and polarizabilities were done at the same level of theory. The results indicate that for the NO₂–(CHCH)₄–Y systems we find group polarizabilities in the order: N(Me)₂ > NBr₂ > OCH₃ > Br > NH₂ > OH > CH₃ > NF₂ > H～F.Semi empirical AM1 and QSAR-quality empirical calculations show poor quantitative agreement with the DFT results, but give excellent statistical correlation coefficients with the DFT values. This implies that the results of such cheaper calculations can suitably scaled for predictive purpose.     

Micellization and surface activity of Triton X-100 in water–orthophosphoric medium

The adsorption isotherms of Triton X-100 for air/water–orthophosphoric acid interfaces were determined by the stripping method. The surface chemical parameters, Γ_max, F and ΔG°_A, and the aggregation ones, CMC and the ΔG_M, are determined in different H₂O/H₃PO₄ mixtures. For concentrations higher than 4 M, the values of the CMC, ΔG_M, Γ_max and ΔG°_A increase with increasing acid concentrations due to the occurring changes in the medium structure. ©2000 Académie des sciences / Éditions scientifiques et médicales Elsevier SASsurface tension / non-ionic surfactant / micellization / orthophosphoric acid     

In vivo biodistribution,antioxidant and hemolysis tendency of superparamagnetic iron oxide nanoparticles – Potential anticancer agents

Ferromagnetic and superparamagnetic oxide nanoparticles are of particular attention because of their possible use in various fields ranging from bio-nanotechnology to spintronics. Detailed magnetic, dielectric and impedance investigations are crucial for the above-mentioned applications. This study deals with the exploration of various iron oxide phases under as-synthesized conditions by sol–gel method. pH of the sols is varied in the range of 1 to 11. X-ray diffraction (XRD) analysis indicate amorphous behavior for nanoparticles synthesized using pH 1 and 3. Nanoparticles synthesized using pH 2 and 4–6 exhibit hematite phase of iron oxide. Whereas structural transition to maghemite phase is observed for pH 7–8. Nanoparticles synthesized using high pH values, i.e. 9–11, exhibit structural transition towards magnetite phase of iron oxide. Hematite nanoparticles exhibit superparamagnetic and ferromagnetic hysteresis curves with saturation magnetization of ～ 24 emu/g and ～ 13–17 emu/g at pH 2 and pH 4–6, respectively. Maghemite nanoparticles exhibit superparamagnetic (pH 7) and ferromagnetic (pH 8) response with saturation magnetization of ～ 69 and ～ 42 emu/g, respectively. Fe₃O₄ nanoparticles exhibit superparamagnetic (pH 9–10) and ferromagnetic (pH 11) behavior with saturation magnetization of ～ 88, 87 and 52 emu/g, respectively. High grain boundary resistance contributed towards high dielectric constant of ～ 99, 109 and 154 (log f = 5.0) at pH 2, 7 and 9. Detailed impedance values indicate dominant role of grain boundaries in the conductivity of iron oxide nanoparticles. Superparamagnetic iron oxide (pH 9) exhibits strong antioxidant activity along with a very weak hemolytic response. The findings of cell lysis reveal that synthesized nanoparticles have a potential to combat dangerous cancer cells. Drug efficacy results show that after 120 min the encapsulation efficacy reaches a peak of ～ 83 % using curcumin, a naturally existing drug. In vivo biodistribution of nanoparticles was studied in Rabbit model. Synthesized nanoparticles are labelled using Technetium-99 m. Whereas, labeling efficacy and stability was examined using =nstant thin layer chromatography (ITLC) process. In vitro and in vivo results suggest potential anti-cancer applications of as-synthesized superparamagnetic nanoparticles.