表面富集季胺盐的交联聚苯乙烯微球合成与表征及其溶胀行为研究

在聚合物微球表面引入不同的基团 (如亲水性的羟基或羧基 ) ,可以改善聚合物微球的稳定性甚至生物相容性[1～ 4] ;利用表面基团可以把无机半导体微粒和功能有机分子以及生物分子引入聚合物微球[5～ 8] ,赋予聚合物微球特殊的性能 ,使其广泛应用于涂料、光电功能材料和生物医用材料等领域[9～ 15] .其中 ,表面带有阳离子的聚合物微球在絮凝剂、胶粘剂、水性涂料等方面已经得到广泛研究[16～ 2 0 ] .通常阳离子聚合物微球可以根据不同的需要利用常规乳液聚合、核壳乳液聚合等方法来合成 .亲水性和疏水性单体进行的无皂乳液聚合[2 1] ,因其能在…     

Uniform-sized molecularly imprinted polymer for (S)-naproxen selectively modified with hydrophilic external layer.

A uniform-sized molecularly imprinted polymer (MIP) for (S)-naproxen selectively modified with hydrophilic external layer has been prepared. First, the molecularly imprinted polymer for (S)-naproxen was prepared using 4-vinylpyridine and ethylene glycol dimethacrylate (EDMA) as a functional monomer and cross-linker, respectively, by a multi-step swelling and thermal polymerization method. Next, a 1:1 mixture of glycerol monomethacrylate (GMMA) and glycerol dimethacrylate (GDMA) was used for hydrophilic surface modification, and it was added directly to the molecularly imprinted polymer for (S)-naproxen 4 h after the start of molecular imprinting. The retention factors of all solutes tested were decreased with the surface modified molecularly imprinted polymer, compared with the unmodified molecularly imprinted polymer. However, chiral recognition of racemic naproxen was attained with the surface modified molecularly imprinted polymer as well as the unmodified molecularly imprinted polymer. Further, bovine serum albumin was completely recovered from the surface modified molecularly imprinted polymer. These results revealed that the chiral recognition sites of (S)-naproxen remained unchanged with hydrophilic surface modification, and that the molecularly imprinted polymer for (S)-naproxen was selectively modified with hydrophilic external layer. Preliminary results reveal that the surface modified molecularly imprinted polymer could be applicable to direct serum injection assays of (S)-naproxen.     

Synthesis of anisotropic nanoparticles by seeded emulsion polymerization

Anisotropic polystyrene nanoparticles of diameters below 0.5 microm were prepared by coating the surface of cross-linked polystyrene latex particles with a thin hydrophilic polymer layer prior to swelling the particles with styrene and then initiating second-stage free-radical polymerization. Conditions were found so that all particles had uniform asymmetry. The effect of surface chemistry on the development of particle anisotropy during seeded emulsion polymerization of sub-0.5 microm diameter particles was studied. The extent and uniformity of the anisotropy of the final particles depended strongly on the presence of the hydrophilic surface coating. Systematic variation of the degree of hydrophilicity of the surface coating provided qualitative insight into the mechanism responsible for anisotropy. Conditions were chosen so that the surface free energy favored the extrusion of a hydrophobic bulge of monomer on the hydrophilic surface of the particle during the swelling phase: the presence of a hydrophilic layer on the particle surface causes this asymmetry to be favored above uniform wetting of the particle surface by the monomer. Kinetic effects, arising from the finite time required for the seed to swell with the monomer, also play a role.     

Copolymerization in N-vinylcaprolactam-N-vinylpyrrolidone and N,N-diethylacrylamide-N,N-dimethylacrylamide systems: The effect of composition and spatial structure of copolymers on their thermal sensitivity

Factors that affect the temperature-responsive properties of water-soluble polymers were revealed by studying the copolymerization of two pairs of monomers: N-vinylcaprolactam-N-vinylpyrrolidone and N,N-diethylacrylamide-N,N-dimethylacrylamide. In each pair, the first monomer forms a temperature-responsive polymer and the second gives a polymer soluble in water up to the boiling point. It was found that in all cases, the addition of the second (more hydrophilic) monomer resulted in a monotonous increase in the phase separation temperature in an aqueous copolymer solution, with the temperature rise being comparatively slow in the initial stage and sharply accelerating after the addition of more than 40–50 mol % second monomer. The phase-separation temperature versus copolymer composition curves for N,N-diethylacrylamide-N,N-dimethylacrylamide copolymers of iso-and heterotactic structure synthesized via anionic polymerization are rather similar. At the same time, the copolymers of both types prepared via radical polymerization are characterized by steeper curves, a pattern that may be due to a high content of the syndiotactic structure, however, changes in the copolymer spatial structure have a lesser effect on the phase separation temperature than the presence of units of a more hydrophilic monomer. The addition of a relatively low amount (20–25 mol %) of a less hydrophilic monomer imparts temperature sensitivity to polymers, such as polyvinylpyrrolidone or polydimethylacrylamide, which do not possess this property in the pure form.     

One‐step polymerization of hydrophilic ionic liquid imprinted polymer in water for selective separation and detection of levofloxacin from environmental matrices

A novel green hydrophilic levofloxacin imprinted polymer was presented via one‐step polymerization in water using ionic liquid 1,6‐hexa‐3,3′‐bis‐1‐vinylimidazolium bromine with multiple hydrophilic groups and 2‐hydroxyethyl methacrylate as a co‐functional monomer. Adsorption experiment revealed that the ionic liquid significantly improved the water compatible of imprinted polymer, and the excellent recognition of molecularly imprinted polymer for levofloxacin in water corresponds to the synergetic effect of H‐bonding and the electrostatic and π–π interactions between the levofloxacin and co‐functional monomer. Furthermore, the adsorption process of the imprinted material towards levofloxacin fitted the Langmuir model, and the maximum binding amount of levofloxacin onto the imprinted and corresponding non‐imprinted polymer were 16.45 and 6.82 mg/g at 25°C, respectively. After optimizing the parameters affecting solid phase extraction performance, an enrichment and determination system was achieved to separate and detect levofloxacin from water and sediment samples with recoveries that ranged from 83.67 to 101.33% and relative standard deviation of less than 5.59%.     

Synthesis and functional properties of thermosensitive polymer derivatives of proteins

N,N-Diethylacrylamide-N-acryloylphthalimide copolymers have been synthesized. The LCST of the synthesized copolymers decreases with increase in both the molecular mass of the copolymers and the content of more hydrophobic N-acryloylphthalimide units. Through the reaction of the copolymers with the proteinase enzyme inhibitor, ovomucoid, the polymer derivatives of protein have been prepared. It has been shown that the biological activity of ovomucoid and the LCST of polymer derivatives increase with the amount of the immobilized ovomucoid. The effect of biologically active media on the LCST values of polymer derivatives has been studied.     

Effect of hydrophilicity on the properties of a degradable polylactide

A series of polylactide networks has been prepared by the copolymerization of a biodegradable oligolactide macromer with hydrophobic methyl methacrylate monomer and hydrophilic hydroxyethyl acrylate monomer, with different amounts of the hydrophilic monomer. The incorporation of the hydrophilic units into the network has been characterized with thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical spectrometry. A homogeneous material results, showing a single glass‐transition temperature and a characteristic relaxation behavior that is not the sum of those of the pure components separately. Additional hydrophilic units in the network chains lower the rubbery modulus, keeping a high modulus value at room temperature, and manifestly increase the degradation rate of the polymer. This can be attributed both to the higher water swellability of the network when hydrophilic units are present and to the higher water diffusion coefficient in a network, which has a lower crosslinking density. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 656–664, 2006     

耐电解质高吸水性树脂

在简述高吸水性树脂吸水机理的基础上,综述了改善高吸水性树脂耐电解质性能的四种途径,结合聚合方法重点讨论了提高亲水性、引入长链疏不性单体以及合成两性聚合物三种改性途径。     

Preparation of imidazole-functionalized silica by surface-initiated atom transfer radical polymerization and its application for hydrophilic interaction chromatography

A novel imidazole-functionalized stationary phase for hydrophilic interaction chromatography (HILIC) was prepared via surface-initiated atom transfer radical polymerization (SI-ATRP). 1-Vinylimidazole as a monomer was polymerized on the surface of initiator-immobilized silica by SI-ATRP using CuCl and 2,2'-bipyridyl as a catalyst. The graft chain length and polymer grafting density were controlled by varying the ratio of monomer to initiator. The resulting materials were characterized by elemental analysis and thermogravimetric analysis. Then, high-performance liquid chromatography separation of eight nucleobases/nucleosides was performed on the imidazole-functionalized chromatographic column in HILIC mode. The effects of mobile phase composition, buffer pH, and column temperature on the separation of nucleobases/nucleosides were investigated, and the retention mechanisms were studied. Chromatographic parameters were calculated, and the results showed that surface adsorption through hydrogen bonding and electrostatic interaction dominated the retention behavior of the solutes in HILIC mode. Lastly, the stationary phase was successfully used to determine the nucleobases and nucleosides from Cordyceps militaris.     

Synthesis and surface properties of a fluorinated polyether

A new polyether consisting of alternate fluorinated/non-fluorinated phenylene units in the backbone has been synthesized via polycondensation of an AB monomer. At room temperature, the polymer film exhibits a low surface energy that is comparable to poly(tetrafluoroethylene) (PTFE). However, as the temperature is raised above a particular level, the surface energy of the polymer films starts to increase. Morphological measurements suggest that a smooth thin polymer film can be formed by solvent casting, but it spontaneously dewets the substrate surface when thermally annealed.     

Synthesis of nanometer-scale polymeric structures on surfaces from template assisted admicellar polymerization: a comparative study with protein adsorption

A novel method for the formation of nanometer-scale polymer structures via template assisted admicellar polymerization (TAAP) is described. Admicellar polymerization uses a surfactant layer adsorbed on a surface to localize monomer to the surface prior to polymerization of the monomer. Nanostructures are formed by restricting adsorption to the uncovered sites of an already-templated surface, in this case to the interstitial sites between adsorbed latex spheres. Unlike most other process that form polymer nanostructures, polymer dimensions can be significantly smaller than the interstitial size because of sphere-surfactant interactions. Protein adsorption in the interstitial sites of colloidal arrays was also studied for three different proteins, and the results were compared with those obtained via admicellar polymerization.     

Synthesis and Electrochemical Characterization of a New Electropolymerizable Hydrophilic Viologen Designed for Enzyme Wiring

A new viologen derivative functionalized by an electropolymerizable pyrrole group via a long hydrophilic spacer has been synthesized. This redox monomer has been electrochemically characterized both for its presence in organic and in aqueous media. Its electrooxidation in both solvents leads to the formation of a polymeric film exhibiting the regular electrochemical behaviour of the viologen groups. The electropolymerization process was applied to the immobilization of isocitrate dehydrogenase as an enzyme model. An electrical connection between the redox polymer and the immobilized enzyme molecules has been observed in the presence of oxoglutarate and CO₂.     

Conducting Redoxpolymer-Based Reagentless Biosensors Using Modified PQQ-Dependent Glucose Dehydrogenase

Reagentless, oxygen-independent glucose biosensors based on an Os-complex-modified polypyrrole matrix and on soluble PQQ-dependent glucose dehydrogenase from Acinetobacter calcoaceticus are described.As the soluble form of glucose dehydrogenase from Acinetobacter calcoaceticus is a hydrophilic enzyme with a positive net charge, its entrapment into the positively charged hydrophobic polypyrrole film is much more complicated than that of the corresponding membrane enzyme or the negatively charged and very stable glucose oxidase. Possible ways for using soluble PQQ-dependent glucose dehydrogenase in combination with conducting polymer films are seen in the modulation of the enzyme properties by covalent binding of suitable compounds to the protein shell together with the adjustment of the properties of the conducting polymer film. This can be done by neutralising the net charge of the protein and/or optimising the electron-transfer pathway between enzyme and electrode surface by covalent binding of suitable redox relays to the protein surface.In addition, methods for increasing the hydrophilicity of the polymer film, such as the co-entrapment of high-molecular weight hydrophilic additives and copolymerisation of hydrophilic pyrrole derivatives are presented. It is demonstrated that the replacement of the parent monomer pyrrole by a suitable hydrophilic pyrrole derivative facilitates the entrapment of the modified soluble PQQ-dependent glucose dehydrogenase into the Os-complex-modified polymer and hence allows for the development of reagentless biosensors.     

Simulation of the latex particle morphology

A model is presented for the simulation of the structuration of polymer particles under conditions in which the new polymer chains are compatible with the polymer previously formed. The model involves the calculation of the monomer concentration gradients within the particles due to discrepancies in thermodynamic interactions between the monomer and the different polymers present in each part of the polymer particle. In addition, the distribution of free radicals in the latex particle is taken into account. This distribution results from the anchoring of the hydrophilic end-group of the growing polymer chain on the surface of the particle. The model was applied to the simulation of the polymerization of vinyl acetate on a butyl acrylate–vinyl acetate copolymer seed. It was found that the development of the particle morphology was mainly due to the profile of concentration of radicals in the particle. On the other hand, the effect of the monomer–polymer thermodynamic interactions on the particle morphology was found to be negligible. However, it has to be pointed out that this is because, for the system studied, the interaction parameters of vinyl acetate with polyvinyl acetate and polybutyl acrylate are nearly identical.     

Photochemical structuring and fixing of structures in binary polymer brush layers via 2pi+2pi photodimerization

Binary polymer brushes grafted to Si wafers were prepared from hydrophilic and hydrophobic polymer components, which allow switching the surface properties (as revealed by contact angles) by exposure to varying solvents. The hydrophilic component was poly-2-vinylpyridine; the hydrophobic component was a copolymer of styrene and 2-(4-vinylphenyl)indene containing the photodimerizable phenylindene chromophore. The brushes were prepared via thermal and via photochemical grafting-to methods, which led to distinct layer thicknesses. Structural patterns differing in surface properties were produced and fixed via crosslinking the hydrophobic component by 2pi+2pi photodimerization of phenylindene moieties. The patterns were visually observable.     

Preparation and characterization of plasma-polymerized styrene thin films

Plasma-polymerized styrene (PPS) thin films (several hundred to several thousand Å thick) have been prepared under a variety of discharge conditions in a tubular reactor inductively coupled to a radio frequency (13.56 MHz) power supply. Studies have focussed on the correlation of deposited polymer structure, evidenced both at the film surface (via XPS analysis) and in the bulk polymer (via transmission FT–IR analysis) with controllable plasma parameters (coupled rf power, monomer flow rate, monomer pressure). It has been determined that the relative number of phenyl rings incorporated into the film intact is an inverse function of the power per styrene molecule ratio. Polymer deposition rate was found to be a strong function of styrene flow rate and substrate temperature. Plausible elements of the styrene plasma polymerization mechanism will be considered.     

Substrate effect on the formation of hydrogels with heterogeneous network structure

It was found that when an aqueous solution of vinyl monomers is polymerized on a hydrophobic substrate, obvious heterogeneity occurs in the region of the interface. This substrate effect was observed on polytetrafluroethylene (Teflon), polypropylene (PP), polyethylene (PE), polystyrene (PS), and polyvinylchloride (PVC), but not on hydrophilic substrates. Compared with synthesis on hydrophilic surfaces, the surfaces of hydrogels synthesized on a hydrophobic substrate exhibit a larger degree of swelling, a lower surface coefficient of friction and elastic modulus, weaker interfacial adhesion, and reduced interaction with biological cells. This substrate effect has been observed for many types of aqueous monomer solutions. It was found that the above properties are related to the loosely cross-linked architecture, containing some graft-like polymer chains, that is formed on the gel surface when the gel is prepared on a hydrophobic substrate. To understand the mechanism of the substrate effect, two novel optical methods, electric speckle pattern interferometry (ESPI) and real-time laser sheet refraction (RT-LSR), were developed. It was found that oxygen trapped in the composite interface between the monomer solution and rough hydrophobic substrates played an important role in the substrate effect.     

Nucleation of gold nanoparticles on latex particle surfaces

Gold particles were nucleated on functionalized (i.e., sulfonate or imidazole groups) latex particle surfaces. Gold ions were associated with the functional groups present on the surface of the latex particles by metal‐ligand formation and were then reduced to nucleate gold particles on the particle surface. The use of imidazole groups favored the metal‐ligand formation more effectively compared with sulfonic acid groups, so gold nucleation was investigated on the surface of imidazole‐functionalized model latex particles. The desorption of gold atoms or their surface migration first occurred during the reduction process and then gold nanoparticles were nucleated. The utilization of strong reductants, such as NaBH₄ and dimethylamine borane (DMAB) under mildly acidic conditions (i.e., pH 4) led to the deprotonation of imidazole‐rich polymer chains present on the surface of the model latex particles followed by deswelling of hydrophilic polymer surface layers. As a result, well‐dispersed gold nanoparticles were embedded in the hydrophilic polymer surface. On the other hand, the use of weak reductants led to the formation of localized gold aggregates on the surface of the latex particles. The removal of residual styrene monomer is very important because gold ions can be coordinated with the vinyl groups present in styrene monomer and would then be reduced by nucleophilic water addition. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 912–925, 2008     

Self‐controlled synthesis of hyperbranched poly(ether‐ketone)s from A2 + B3 approach in poly(phosphoric acid)

Self‐controlled synthesis of hyperbranched poly(ether‐ketone)s (HPEKs) were prepared from “A₂ + B₃” approach by using different monomer solubility in reaction medium. 1,3,5‐Triphenoxybenzene as a hydrophobic B₃ monomer was reacted with commercially available terephthalic acid or 4,4′‐oxybis(benzoic acid) as a hydrophilic A₂ monomer in a hydrophilic reaction medium, polyphosphoric acid (PPA)/phosphorous pentoxide (P₂O₅). The resultant HPEKs were soluble in various common organic solvents and had the weight‐average molecular weight in the range of 3900–13,400 g/mol. The results implied that HPEKs were branched structures instead of crosslinked polymers. The molecular sizes and shapes of HPEKs were further assured by morphological investigation with scanning electron microscopy (SEM) and atomic force microscopy (AFM). Hence, the applied polymerization condition was indeed strong enough to efficiently facilitate polycondensation via “direct” Friedel‐Crafts reaction without gelation. It could be concluded that the polymer forming reaction was kinetically controlled by automatic and slow feeding of the hydrophobic B₃ monomer into the hydrophilic reaction mixture containing hydrophilic comonomer. As a result, hyperbranched structures were formed instead of crosslinked polymers even at full conversion (equifunctional monomer feed ratio). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3326–3336, 2009     

Hydration and dielectric properties of aqueous solutions of protonated diallylmethylammonium polymer: transition from monomer to polymer

Abstract

The high-frequency dielectric relaxation of aqueous solutions of protonated diallylammonium polyelectrolyte, namely poly(diallylmethylammonium trifluoroacetate) has been studied at the maximum water dispersion frequencies, 7.5–25?GHz, and temperatures of 288, 298, and 308?K. Dielectric relaxation parameters have been calculated and compared with similar characteristics of aqueous solutions of monomer, diallylmethylammonium trifluoroacetate, and pyrrolidinium trifluoroacetate salt simulated structure of pyrrolidinium polymer link. It has been concluded that although the monomer features hydrophobic hydration, its polymer exhibits hydrophilic hydration properties. This change is related to conformation of hydrophilic-hydrophobic polycations in aqueous solutions and the change in the structure of polymer links.