Density and viscosity of α-amino acids in aqueous solutions of cetyltrimethylammonium bromide

The densities and viscosities of aqueous solution of cetyltrimethylammonium bromide (0.01 mol kg⁻¹) (CTAB) and solutions of CTAB containing amino acids, viz., glycine, l-serine, and l-valine (0.01–0.05 mol kg⁻¹), were determined in the temperature range 298.15—313.15 K. Apparent molar volumes of the amino acids were calculated from the density and viscosity values. The calculated apparent molar volumes were used to calculate standard partial molar volumes (-V ₂⁰) and standard partial molar volumes of transfer of amino acids from water to an aqueous solution of CTAB. The viscosity values were used for the calculation of the viscosity coefficients A and B in the Jones—Dole equation. The linear dependences of -V ₂⁰ and B on the number of carbon atoms in the alkyl chains of the amino acids were found. The results obtained were used in analysis of hydrophilic-hydrophilic, hydrophilic-hydrophobic, and hydrophobic-hydrophobic interactions that occur during dissolution of amino acids in an aqueous solution of CTAB.     

Phase equilibria and structures of phases in the chitosan—polyvinyl alcohol systems

Russian Chemical Bulletin - Phase equilibria in the mixtures of polyvinyl alcohol (PVA) and chitosan were revealed. Structures of the phases were identified. The temperature and concentration...     

Luminescent-probe study of the structure of alcohol — Water solutions

Journal of Structural Chemistry -     

Direct Sp3α-C-H activation and functionalization of alcohol and ether

Seven kinds of sp(3)α-C-H activation/C-C formation reactions of alcohols and ethers have been reviewed in this tutorial review, from the viewpoint of both methodology and synthetic application, towards the efficiency, chemo-, regio- and stereoselectivity, catalytic system, substrate scope and mechanistic study. Section 2 describes radical-mediated α-C-H activation and addition/elimination of ethers with unsaturated (C=C and C[triple bond]C) species. Sections 3-8 discuss the α-C-H activation and additions of alcohols and/or ethers with unsaturated (C=C, C[triple bond]C, C=O and C=N) compounds, which involve the key processes of radical mediation, carbenoid insertion, 1,5-H-migration, oxidative dehydrogenation coupling, transfer hydrogenative coupling, and metal-mediated C=C insertion into the C-H bond.     

Preparation of α-terpineol and perillyl alcohol using zeolites beta

The preparation of α-terpineol by direct hydration of limonene catalyzed by zeolites beta was studied. The same catalyst was used to prepare perillyl alcohol by isomerization of β-pinene oxide in the presence of water. The aim was to optimize the reaction conditions to achieve high conversions of starting material and high selectivity to the desired products. In the case of limonene, it was found that the highest selectivity to α-terpineol was 88% with conversion of 36% under the conditions: 50 wt% of catalyst beta 25, 10% aqueous acetic acid (10 mL) (volume ratio limonene:H₂O?=?1:4.5), temperature 50 °C, after 24 h. In the case of β-pinene oxide, it was found that the highest selectivity to perillyl alcohol, which was 36% at total conversion, was obtained in the reaction under the following conditions: dimethyl sulfoxide as solvent (volume ratio β-pinene oxide:DMSO?=?1:5), catalyst beta 25 without calcination (15 wt%), demineralized water (molar ratio β-pinene oxide:H₂O?=?1:8), temperature 70 °C, 3 h. The present study shows that the studied reactions are suitable for the selective preparation of chosen compounds.

     

Energetics of intramolecular hydrogen bonds and conformations of ω-diphenylphosphoryl- and ω-diphenylthiophosphoryl-substituted aliphatic alcohol molecules

A series of conformationally heterogeneous and energetically multilevel -diphenylphosphoryl- and -diphenylthiophosphoryl-substituted aliphatic alcohols, whose molecules are capable of five-, six-, and seven-membered ring closure due to the OH...O=P or OH...S=P intramolecular hydrogen bond (IHB), was studied by IR spectroscopy and molecular mechanics. The data obtained confirm the previous assumption that the energy of IHB (E _IHB) differs substantially from the difference of enthalpies of conformers with and without IHB (–H ), which is experimentally determined by the temperature dependence of the intensity of IR (OH) absorption bands. The measured –H values can be positive, zero, or negative at significant IHB effects, i.e., at high (OH) and E _IHB values.     

The effect of β-cyclodextrin on the properties of cetyltrimethylammonium bromide micelles

The effect of ß-cyclodextrin (ß-CD) on cetyltrimethylammonium bromide (CTAB) micellar properties was studied by the determination of the diffusion coefficient, D. When the CTAB micelles have a spherical structure, D firstly increased and then remained unchanged, while the micellar aggregation number, N, decreased with the addition of ß-CD. When the CTAB concentration was less than the first critical micellar concentration, CTAB molecules could be included into ß-CD cavities with the molar ratio of CTAB to ß-CD being about 1:1. However, when the CTAB concentration was higher than the first critical micellar concentration, mixed spherical micelles were formed with the molar ratio of CTAB to ß-CD being 9:1.     

Study of the surface properties and surface concentration of ionic liquid–alcohol mixtures

Surface properties for three binary mixtures containing a 1-butyl-3-methylimidazolium thiocyanate ([BMIM][SCN]) and a long-chain alcohol (1-butanol, 1-pentanol and 1-hexanol) were determined by surface tension data at the following temperatures: (298.15, 308.15, 318.15, 328.15 and 338.15) K. The surface tension data over the entire mole fraction range are correlated by the Fu et al.(FLW) and Myers-Scott (MS) models. There is good agreement between the experimental data and the results of correlations for 15 binary systems (the three systems at five temperatures) with an average relative error below 1.5%. In addition, the UNIFAC group contribution method is applied for calculation of activity coefficients of components in solution. Moreover, the relative adsorptions of alcohol at the air/liquid interface are determined using Gibbs adsorption isotherm. The obtained results show that the values of adsorption for mixtures of alcohols/[BMIM][SCN] increase with increasing the alkyl chain length of alcohol and decreasing temperature.     

Synthesis and Characterization of a Hydrophilic/Hydrophobic IPN Composed of Poly（vinyl alcohol） and Polystyrene

A hydrophilic/hydrophobic interpenetrating polymer network （IPN） of poly （vinyl alcohol） / polystyrene was prepared by conversion of the IPN of poly （vinyl acetate）/polystyrene. The hydrophilic/hydrophobic IPN was characterized by FT-IR and DSC, and the swelling ratios of the IPN in different solvents were measured.     

A preliminary study of isopropyl alcohol matrix effect and correction in ICP-MS

Isopropyl alcohol matrix effect was found to be element specific by using the defined matrix effect factor in ICP-MS,which could not be corrected by using the conventional internal reference method.Unlike the conventional internal reference method,the presented method allows for the analyte to behave differently from the internal reference under the influence of the matrix.     

Interaction between cetyltrimethylammonium bromide and β-cyclodextrin: surface tension and interfacial dilational viscoelasticity studies

The interaction between cetyltrimethylammonium bromide (CTAB) and β-cyclodextrin (β-CD) was studied via surface tension and dilational viscoelasticity methods. The effect of sodium bromide and sodium chloride on the interaction between CTAB and β-CD were studied as well. The surface tension isotherms provided a series of parameters, including apparent critical micelle concentration (cmc*), surface tension at the cmc* (γ_cmc), stoichiometry of the complex (R), and the efficiency of adsorption (pC ₂₀ ). The addition of NaBr and NaCl decreases the cmc* of CTAB/β-CD solution. CTAB molecules enter the cavities of β-CD molecules thus formed both 1:1 and 1:2 inclusion complexes. From the change of γ_cmc, it can be seen that the CTAB/β-CD complexes (1:1) act as short-chain alcohol, which decrease γ_cmc, but the depression of cmc* is too small to be detected. R first decreases then increases as a function of NaBr and NaCl. Compared to NaCl, NaBr increases R more efficiently. The presence of NaBr and NaCl increases pC ₂₀ of CTAB/β-CD solution. The results obtained from the dilational viscoelasticity measurements at low dilational frequencies (0.005–0.1 Hz) reveal that the dilational modulus passes through a maxium value with increasing concentration of β-CD at a given concentration of CTAB. The addition of both NaBr and NaCl decreases the dilational modulus of a given concentration CTAB/β-CD solution. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Micelle-forming,liquid-crystalline properties,and catalytic effect of the mixed cetyltrimethylammonium bromide—polyethylene glycol(∼9) monoalkanoate(∼14)—water micellar system

The formation of mixed micelles in the surfactant cetyltrimethylammonium bromide—polyethylene glycol(9) monoalkanoate(14) binary system was shown. The stable lyomesophase involving monomers of both surfactants forms in the region of high surfactant concentrations in the temperature interval from 25 to 96 °C. In the binary micellar system, the alkaline hydrolysis of O-ethyl-O-p-nitrophenyl chloromethyl phosphonate is accelerated up to 30-fold compared with the reaction in water in the absence of a surfactant. The efficiency of catalysis depends on the molar ratio between both surfactants. The sign of the catalytic effect changes at high surfactant concentrations.     

Rational synthesis and X-ray structural study of manganese–pyridine–alcohol derivatives

Systematic syntheses of manganese derivatives with 2-pyridineethanol, 2-pyridinemethanol and 2,6-pyridinedimethanol as chelating ligands have been undertaken to produce [trans-Mn(C₅H₄N-2-CH₂CH₂OH)₂Cl₂] (1), [cis-Mn₂(μ-Cl)₂(Cl)₂(C₅H₄N-2-CH₂CH₂OH)₂(OH₂)₂] (2), [cis-Mn₂(μ-Cl)₂(C₅H₄N-2-CH₂OH)₄]Cl₂ (3) and [MnCl{η₃-C₅H₃N-2,6-(CH₂OH)₂}{η₂-(C₅H₃N-2,6-(CH₂OH)₂)}]Cl (4). The complexes were characterized by single-crystal X-ray diffraction. The oxidation state of the manganese ions in these complexes is 2+. Magnetic data are measured down to 2?K; in dimer complexes (2 and 3) a significant antiferromagnetic interaction is observed between two manganese ions.     

Investigation on the combustion efficiency and residual of nitrocellulose–alcohol humectant mixtures

To have an insight into the fire properties of nitrocellulose–isopropanol and –ethanol mixtures, the experimental data in previous work are further extracted and analyzed carefully. Generally, the effective heats of combustion of the two samples characterized by both the peak and mean heat release rates decrease with the increasing external irradiance levels. The combustion efficiencies characterized by the ratio of carbon dioxide (CO₂) to carbon monoxide (CO), regardless of the maximum and mean values, also show the similar decreasing tendency, exhibiting a lower combustion efficiency at elevated external radiation. With respect to the X-ray photoelectron spectroscopy results, the two nitrocellulose–alcohol mixtures appear to yield the similar species of combustion residuals, but slightly different in the atomic concentrations, which may be due to the differences in the alcohol humectant and nitrogen content in nitrocellulose substrate. These findings are expected to provide further understanding of fire properties of nitrocellulose–alcohol mixtures and help with fire investigation of such type of fires.

     

Mutual influence of cetyltrimethylammonium bromide and Triton X-100 on their adsorption at the water–air interface

On the basis of surface tension values of the aqueous solution of cetyltrimethylammonium bromide (CTAB) and Triton X-100 (TX-100) mixtures measured at 293 K as a function of CTAB or TX-100 concentration at constant TX-100 or CTAB concentration, respectively, the real surface area occupied by these surfactants at the water–air interface was established which is inaccessible in the literature. It appeared that at the concentration of the CTAB and TX-100 mixture in the bulk phase corresponding to the unsaturated monolayer at the water air-interface this area is the same as in the monolayer formed by the single surfactant at the same concentration as in the mixture. In the saturated mixed monolayer at this interface the area occupied by both surfactants is lower than that in the single surfactant monolayer corresponding to the same concentration in the aqueous solution. However, the decrease of the CTAB adsorption is lower than that of TX-100 and the total area occupied by the mixture of surfactants is also lower than that of the single one. The area of particular surfactants in the mixed saturated monolayer changes as a function of TX-100 and CTAB mixture concentration and at the concentrations close to CMC or higher the area occupied by both surfactants is the same. The changes of the composition of the mixed surface monolayer are connected with the synergetic effect in the reduction of the water surface tension by the adsorption of CTAB and TX-100 at the water–air interface. This effect was confirmed by the values of the standard Gibbs free energy of adsorption of both individual surfactants and their mixtures with different compositions in the bulk phase determined by using the Langmuir equation if RT instead of nRT was applied in this equation.     

Vibrational spectra and molecular configuration of 2,2′-diphenyl ethyl alcohol and 2,2′-diphenyl ethylamine

The Raman and IR spectra of 2,2′-diphenyl ethyl alcohol and 2,2′-diphenyl ethylamine have been analyzed assuming the phenyl rings vibrate independently. Complete vibrational assignment show that some ring modes for both the molecules are found to appear in pairs. Possible orientation of the two rings with respect to the tetragonally hybridized carbon atom has been discussed. Two probable cases of Fermi resonance have been observed. The general nature of the ring modes to exhibit a pair of frequencies in some diphenyl-type molecules has been described.     

Synthesis and Characterization of Charge—transfer Complexes of Aminoethylphoshphono—and Dimethylaminoethylphosphono—heteropolytungstic Acids of Keggin Type Structure

Two charge-transfer complexes of 2a and 2b of Keggin type were synthesized and characterized by elemental analysis,IR spectra,UV spectra,XRD,TG-DSC;and were compared with Hquin-PW12.The primary structure of the heteropolyanions had not been changed after the formation of the charge transfer complexes.     

Theoretical study of N–H· · ·O hydrogen bonding properties and cooperativity effects in linear acetamide clusters

We investigated geometry, energy, ${\nu_{{\text{N--H}}}}$ harmonic frequencies, ¹⁴N nuclear quadrupole coupling tensors, and ${n_{\rm O}\to \sigma _{{\text{N--H}}}^\ast}$ charge transfer properties of (acetamide) _n clusters, with n = 1 ? 7, by means of second-order Møller-Plesset perturbation theory (MP2) and DFT method. Dependency of dimer stabilization energies and equilibrium geometries on various levels of theory was examined. B3LYP/6-311++G** calculations revealed that for acetamide clusters, the average hydrogen-bonding energy per monomer increases from ?26.85 kJ mol^?1 in dimer to ?35.12 kJ mol^?1 in heptamer; i.e., 31% cooperativity enhancement. The n-dependent trend of ${\nu_{{\text{N--H}}}\,{and}\,^{14}}$ N nuclear quadrupole coupling values were reasonably correlated with cooperative effects in ${r_{{\text{N--H}}}}$ bond distance. It was also found that intermolecular ${n_{\rm O}\to \sigma_{{\text{N--H}}}^\ast}$ charge transfer plays a key role in cooperative changes of geometry, binding energy, ${\nu_{{\text{N--H}}}}$ harmonic frequencies, and ¹⁴N electric field gradient tensors of acetamide clusters. There is a good linear correlation between ¹⁴N quadrupole coupling constants, C _Q (¹⁴N), and the strength of Fock matrix elements (F _ij ). Regarding the ${n_{\rm O}\to \sigma_{{\text{N--H}}}^\ast}$ interaction, the capability of the acetamide clusters for electron localization, at the N–H· · ·O bond critical point, depends on the cluster size and thereby leads to cooperative changes in the N–H· · ·O length and strength, N–H stretching frequencies, and ¹⁴N quadrupole coupling tensors.     

Development and physicochemical characterization of doxorubicin-encapsulated hydroxyapatite–polyvinyl alcohol nanocomposite for repair of osteosarcoma-affected bone tissues

Nowadays locoregional therapy for cancer treatment can be associated with nanocomposite drug delivery systems. Coated nanoparticles have versatile applications for delivering chemotherapeutic drugs to the targeted part of the body. In this study, a ceramic carrier like nanosized hydroxyapatite (HAp) was synthesized by the in situ precipitation method followed by coating with anticancer drug like doxorubicin (DOX) and polyvinyl alcohol (PVA) polymer. The physicochemical characterization of the prepared polymer-coated drug ceramic nanocomposite (DOX-HAp-PVA) was carried out using Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron spectroscopy, and particle size distribution. Furthermore, the biocompatibility and the anticancer activity of the nanocomposite were explored by MTT assay study. Successfully synthesized DOX-HAp-PVA nanocomposite exhibited a remarkable cytotoxicity toward osteosarcoma cells (MG 63), which may be potentially used as an anticancer agent against osteosarcoma.     

Determination of trace levels of acetamide,propanamide, and butyramide in surface and drinking water using gas chromatography–mass spectrometry after derivatization with 9-xanthydrol

A sensitive gas chromatographic mass spectrometric (GC–MS) method has been established for the simultaneous determination of acetamide (AA), propanamide (PA), and butyramide (BA) in surface and drinking water based on derivatization with 9-xanthydrol. Deuterated acrylamide was chosen as the internal standard for analyzing the water sample. The derivatization of AA, PA, and BA was performed directly in water and the reaction conditions (10.0-mM 9-xanthydrol, 0.5-M HCl, 20-min reaction time, and ambient temperature) were established. Under these conditions, the detection limit of the analytes was 0.03 μg L⁻¹, and the interday relative standard deviation was less than 16% at concentrations of 1.0, 5.0 and 10.0 μg L⁻¹. The proposed GC–MS method enables the reliable analysis of trace AA, PA, and BA in environmental water.