共查询到10条相似文献，搜索用时 93 毫秒
1.
This paper aims to reassess the Riemann solver for compressible fluid flows in Lagrangian frame from the viewpoint of modified equation approach and provides a theoretical insight into dissipation mechanism. It is observed that numerical dissipation vanishes uniformly for the Godunov‐type schemes in the sense that associated dissipation matrix has zero determinant if an exact or approximate Riemann solver is used to construct numerical fluxes in the Lagrangian frame. This fact connects to some numerical defects such as the wall‐heating phenomenon and start‐up errors. To cure these numerical defects, a traditional numerical viscosity is added, as well as the artificial heat conduction is introduced via a simple passage of the Lax–Friedrichs type discretization of internal energy. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
2.
Vincent Guinot 《国际流体数值方法杂志》2001,37(3):341-359
Godunov‐type algorithms are very attractive for the numerical solution of discontinuous flows. The reconstruction of the profile inside the cells is crucial to scheme performance. The non‐linear generalization of the discontinuous profile method (DPM) presented here for the modelling of two‐phase flow in pipes uses a discontinuous reconstruction in order to capture shocks more efficiently than schemes using continuous functions. The reconstructed profile is used to define the Riemann problem at cell interfaces by averaging of the components of the variable in the base of eigenvectors over their domain of dependence. Intercell fluxes are computed by solving the Riemann problem with an approximate‐state solver. The adapted treatment of boundary conditions is essential to ensure the quality of the computational results and a specific procedure using virtual cells at both extremities of the computational domain is required. Internal boundary conditions can be treated in the same way as external ones. Application of the DPM to test cases is shown to improve the quality of computational results significantly. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
3.
基于Godunov型数值格式的有限体积法是求解双曲型守恒律系统的主流方法,其中用来计算界面数值通量的黎曼求解器在很大程度上决定了数值格式在计算中的表现。单波的Rusanov求解器和双波的HLL求解器具有简单、高效和鲁棒性好等优点,但是在捕捉接触间断时耗散太大。全波的HLLC格式能够精确捕捉接触间断,但是在计算中出现的激波不稳定现象限制了其在高马赫数流动问题中的应用。本文利用双曲正切函数和五阶WENO格式来重构界面两侧的密度值,并且结合边界变差下降算法来减小Rusanov格式耗散项中的密度差,从而提高格式对于接触间断的分辨率。研究表明,相比于全波的HLLC求解器,本文构造的黎曼求解器不仅具有更高的接触分辨率,而且还具有更好的激波稳定性。 相似文献
4.
We develop a Godunov‐type scheme for a non‐conservative, unconditional hyperbolic multiphase model. It involves a set of seven partial differential equations and has the ability to solve interface problems between pure materials as well as compressible multiphase mixtures with two velocities and non‐equilibrium thermodynamics (two pressures, two temperatures, two densities, etc.).Its numerical resolution poses several difficulties. The model possesses a large number of acoustic and convective waves (seven waves) and it is not easy to upwind all these waves accurately and simply. Also, the system is non‐conservative, and the numerical approximations of the corresponding terms need to be provided. In this paper, we focus on a method, based on a characteristic decomposition which solves these problems in a simple way and with good accuracy. The robustness, accuracy and versatility of the method is clearly demonstrated on several test problems with exact solutions. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
5.
Approximate or exact Riemann solvers play a key role in Godunov‐type methods. In this paper, three approximate Riemann solvers, the MFCAV, DKWZ and weak wave approximation method schemes, are investigated through numerical experiments, and their numerical features, such as the resolution for shock and contact waves, are analyzed and compared. Based on the analysis, two new adaptive Riemann solvers for general equations of state are proposed, which can resolve both shock and contact waves well. As a result, an ALE method based on the adaptive Riemann solvers is formulated. A number of numerical experiments show good performance of the adaptive solvers in resolving both shock waves and contact discontinuities. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
6.
In this paper, we present a general Riemann solver which is applied successfully to compute the Euler equations in fluid dynamics with many complex equations of state (EOS). The solver is based on a splitting method introduced by the authors. We add a linear advection term to the Euler equations in the first step, to make the numerical flux between cells easy to compute. The added linear advection term is thrown off in the second step. It does not need an iterative technique and characteristic wave decomposition for computation. This new solver is designed to permit the construction of high‐order approximations to obtain high‐order Godunov‐type schemes. A number of numerical results show its robustness. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
7.
This paper presents a method of controlling the water levels in a conduit system by employing optimal control theory and the finite element method. A shallow‐water equation is employed for the analysis of flow behaviour. Optimal control theory is utilized to obtain a control value for the target state value. The Sakawa–Shindo method is employed as a minimization technique. For the computational storage requirements, the time domain decomposition method is applied. The Crank–Nicolson method is used for temporal discretization. In addition to a method for optimally controlling water level, a method is presented for determining transversality conditions, the terminal condition of the Lagrange multiplier. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
8.
Himanshu Joshi Arpit Agarwal Bhalchandra Puranik Chang Shu Amit Agrawal 《国际流体数值方法杂志》2010,62(4):403-427
The lattice Boltzmann method (LBM) has established itself as an alternative approach to solve the fluid flow equations. In this work we combine LBM with the conventional finite volume method (FVM), and propose a non‐iterative hybrid method for the simulation of compressible flows. LBM is used to calculate the inter‐cell face fluxes and FVM is used to calculate the node parameters. The hybrid method is benchmarked for several one‐dimensional and two‐dimensional test cases. The results obtained by the hybrid method show a steeper and more accurate shock profile as compared with the results obtained by the widely used Godunov scheme or by a representative flux vector splitting scheme. Additional features of the proposed scheme are that it can be implemented on a non‐uniform grid, study of multi‐fluid problems is possible, and it is easily extendable to multi‐dimensions. These features have been demonstrated in this work. The proposed method is therefore robust and can possibly be applied to a variety of compressible flow situations. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
9.
This paper applies the higher‐order bounded numerical scheme Weighted Average Coefficients Ensuring Boundedness (WACEB) to simulate two‐ and three‐dimensional turbulent flows. In the scheme, a weighted average formulation is used for interpolating the variables at cell faces and the weighted average coefficients are determined from a normalized variable formulation and total variation diminishing (TVD) constraints to ensure the boundedness of the solution. The scheme is applied to two turbulent flow problems: (1) two‐dimensional turbulent flow around a blunt plate; and (2) three‐dimensional turbulent flow inside a mildly curved U‐bend. In the present study, turbulence is evaluated by using a low‐Reynolds number version of the k–ω model. For the flow simulation, the QUICK scheme is applied to the momentum equations while either the WACEB scheme (Method 1) or the UPWIND scheme (Method 2) is used for the turbulence equations. The present study shows that the WACEB scheme has at least second‐order accuracy while ensuring boundedness of the solutions. The present numerical study for a pure convection problem shows that the ‘TVD’ slope ranges from 2 to 4. For the turbulent recirculating flow, two different mixed procedures (Method 1 and Method 2) produce a substantial difference for the mean velocities as well as for the turbulence kinetic energy. Method 1 predicts better results than Method 2 does, comparing the analytical solution and the experimental data. For the turbulent flow inside the mildly curved U‐bend, although the predictions of velocity distributions with two procedures are very close, a noticeable difference of turbulence kinetic energy is exhibited. It is noticed that the discrepancy exists between numerical results and the experimental data. The reason is the limit of the two‐equation turbulence model to such complex turbulent flows with extra strain‐rates. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
10.
Yansu Li Jian Yu Hongkang Liu 《International Journal of Computational Fluid Dynamics》2017,31(9):362-378
Shock-capturing and broad-bandwidth scale resolutions are two main challenges of compressible turbulent flow simulation. To meet the rigorous requests, a novel fifth-order hybrid scheme based on a uniform hybrid framework is designed. With the help of a continuous weight operator, the new scheme combines an upwind compact scheme for smooth regions and a compact-reconstruction weighted essentially non-oscillatory scheme for discontinuous regions. Numerical analyses and canonical numerical tests confirm that the new scheme has high accuracy, spectral-like resolution property and shock-capturing capability. Besides, the new scheme shows high computational efficiency compared to the related shock-capturing schemes and hybrid ones. 相似文献