Effect of the manufacturing parameters on the structure of nitrogen-doped carbon nanotubes produced by catalytic laser-induced chemical vapor deposition

Series of self-assembled and mono-dispersed bovine serum albumin (BSA)-conjugated ZnS/CuS nano-composites with different Zn/Cu ratios had been successfully synthesized by a combination method of the biomimetic synthesis and ion-exchange strategy under the gentle conditions. High-resolution transmission electron microscopy observation, Fourier transform infrared spectra and zeta potential analysis demonstrated that BSA-conjugated ZnS/CuS nano-composites with well dispersity had the hierarchical structure and BSA was a key factor to control the morphology and surface electro-negativity of final products. The real-time monitoring by atomic absorption spectroscopy and powder X-ray diffraction revealed that the Zn/Cu ratio of nano-composites could be controlled by adjusting the ion-exchange time. In addition, the metabolic and morphological assays indicated that the metabolic proliferation and spread of rat pheochromocytoma (PC12) cells could be inhibited by nano-composites, with the high anti-cancer activity at a low concentration (4 ppm). What were more important, Zn and Cu in nano-composites exhibited a positive cooperativity at inhibiting cancer cell functions. The microscope observation and biochemical marker analysis clearly revealed that the nano-composites-included lipid peroxidation and disintegration of membrane led to the death of PC12 cells. Summarily, the present study substantiated the potential of BSA-conjugated ZnS/CuS nano-composites as anti-cancer drug.     

Nanocomposite Ni–TiN coatings prepared by ultrasonic electrodeposition

Nanocomposite Ni–TiN coatings were prepared by ultrasonic electrodeposition and the effects of ultrasonication on the coatings were studied. X-ray diffraction analysis was utilized to detect the crystalline and amorphous characteristics of the composite coatings. The surface morphology and metallurgical structure were observed by scanning electron microscopy, high-resolution transmission electron microscopy and scanning probe microscopy. The results showed that ultrasonication had great effects on TiN nanoparticles in composite coatings. The moderate ultrasonication conduced to homogeneous dispersion of TiN particles in the coatings. Moreover, the TiN nanoparticles that entered and homogeneously dispersed in the composite coating led to an increase in the number of nuclei for nucleation of nickel grains and inhibition of grain growth. Therefore, the introduction of ultrasonication and TiN nanoparticles resulted in the formation of smaller nickel grains. The average grain diameter of TiN particles was ∼33 nm, while Ni grains measured approximately 53 nm.     

Nanostructure materials for destruction of warfare agents and eco-toxins prepared by homogeneous hydrolysis with thioacetamide: Part 1—zinc oxide

Zinc sulphide (ZnS) nanoparticles were prepared by homogeneous hydrolysis of zinc sulphate and thioacetamide (TAA) at 80 °C. After annealing at temperature above 400 °C in oxygen atmosphere, zinc oxide (ZnO) nanoparticles were obtained. The ZnS and ZnO nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission microscopy (HRTEM), selected area electron diffraction (SAED), by BET and BJH methods used for surface area and porosity determination. The photocatalytic activity of the as-prepared ZnO samples was determined by the decomposition of Orange II in the aqueous solution under UV irradiation of 365 nm of wavelength.     

Biomimetic synthesis of HgS nanoparticles in the bovine serum albumin solution

HgS nanocrystals conjugated with protein were synthesized in aqueous solution of Bovine Serum Albumin (BSA) at room temperature. The obtained HgS nanoparticles with average diameter about 20–40 nm were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), selected-area electron diffraction (SAED) and high-resolution transmission electron microscopy (HRTEM). The quantum-confined effect of the HgS nanoparticles is confirmed by the ultraviolet-visible (UV-vis) and photoluminescence (PL) spectrum. The rescults indicate that the BSA not only induce the nucleation, but inhibit the further growth of HgS nanoparticles. The effect of Hg²⁺ on BSA and the change of BSA conformation were studied through Fourier transform infrared (FTIR) spectroscopy and Circular dichroism (CD) spectroscopy. The possible mechanism of HgS nanoparticles growth in the BSA solution was also discussed.     

Synthesis of ZnS nanoparticles on a solid surface: Atomic force microscopy study

In this work, zinc sulfide (ZnS) nanoparticles had been synthesized on DNA network/mica and mica surface, respectively. The synthesis was carried out by first dropping a mixture of zinc acetate and DNA on a mica surface for the formation of the DNA networks or zinc acetate solution on a mica surface, and subsequently transferring the sample into a heated thiourea solution. The Zn²⁺ adsorbed on DNA network/mica or mica surface would react with S²⁻ produced from thiourea and form ZnS nanoparticles on these surfaces. X-ray diffraction and atomic force microscopy (AFM) were used to characterize the ZnS nanoparticles in detail. AFM results showed that ZnS nanoparticles distributed uniformly on the mica surface and deposited preferentially on DNA networks. It was also found that the size and density of ZnS nanoparticles could be effectively controlled by adjusting reaction temperature and the concentration of Zn²⁺ or DNA. The possible growth mechanisms have been discussed in detail.     

Cadmium sulfide rod-bundle structures decorated with nanoparticles from an inorganic/organic composite

We report a new morphology of wurzite cadmium sulfide with nanoparticles decorated on rod-bundle structures, which were synthesized via calcinations of an inorganic/organic composite at 400 °C in air. The composite was hydrothermally synthesized at 180 °C using thioglycolic acid (TGA) and cadmium acetate as starting materials. The structure, composition, and morphology of the prepared material were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscope, FT-IR spectrometry, photoluminescence spectrometry, and UV–visible spectrometry. Results indicated that the composite could be defined as CdS _0.65/Cd–TGA_0.35. X-ray diffraction revealed that the annealed product is CdS with wurtizite phase. The diameter of the rod is about 150–400 nm and the length from the top to the bottom of the decorated nanoparticle is about 100 nm. The composite showed high intensity of photoluminescence with similar peak position, compared to that of wurtzite CdS, because of the structure defects.     

Microwave-assisted hydrothermal synthesis of biocompatible silver sulfide nanoworms

In this study, silver sulfide nanoworms were prepared via a rapid microwave-assisted hydrothermal method by reacting silver nitrate and thioacetamide in the aqueous solution of the Bovine Serum Albumin (BSA) protein. The morphology, composition, and crystallinity of the nanoworms were characterized by field emission scanning electron microscopy (FESEM), X-ray powder diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), X-ray energy dispersive spectroscopy (EDS), and Fourier transform infrared (FTIR) spectroscopy. The results show that the nanoworms were assembled by multiple adjacent Ag₂S nanoparticles and stabilized by a layer of BSA attached to their surface. The nanoworms have the sizes of about 50 nm in diameter and hundreds of nanometers in length. The analyses of high-resolution TEM and their correlative Fast Fourier Transform (FFT) indicate that the adjacent Ag₂S nanoparticles grow by misoriented attachment at the connective interfaces to form the nanoworm structure. In vitro assays on the human cervical cancer cell line HeLa show that the nanoworms exhibit good biocompatibility due to the presence of BSA coating. This combination of features makes the nanoworms attractive and promising building blocks for advanced materials and devices.     

Optical measurements of ZnS nanoparticles aqueous solution

We synthesized zinc sulfide (ZnS) nanopowders with size ranging from 2 to 100 nm by a simple, low-cost, and mass production chemical method. The nanoparticles (NPs) were characterized by X-ray powder diffraction (XRD), atomic force microscopy (AFM), transmission electron microscopy (TEM), and UV-vis absorption spectroscopy. Our study concerns also the change in the refractive index of deionized water in presence of ZnS nanospheres. We present experimental results on effective index variation of water dispersed ZnS NPs at different wavelengths in visible spectrum.     

Structural and physicochemical properties of lotus seed starch nanoparticles prepared using ultrasonic-assisted enzymatic hydrolysis

Lotus seed starch nanoparticles were prepared by ultrasonic (ultrasonic power: 200 W, 600 W, 1000 W; time: 5 min, 15 min, 25 min; liquid ratio (starch: buffer solution): 1%, 3%, 5%) assisted enzymatic hydrolysis (LS-SNPs represent lotus seed starch nanoparticles prepared by enzymatic hydrolysis and U-LS-SNPs represent lotus seed starch nanoparticles prepared by high pressure homogenization-assisted enzymatic hydrolysis). The structure and physicochemical properties of U-LS-SNPs were studied by laser particle size analysis, scanning electron microscope, X-ray diffraction, Raman spectroscopy, nuclear magnetic resonance and gel permeation chromatography system. The results of scanning electron microscopy showed that the surface of U-LS-SNPs was cracked and uneven after ultrasonic-assisted enzymolysis, and there was no significant difference from LS-SNPs. The results of particle size analysis and gel permeation chromatography showed that the particle size of U-LS-SNPs (except 5% treatment group) was smaller than that of LS-SNPs. With the increase of ultrasonic power and time, the weight average molecular gradually decreased. The results of X-ray diffraction and Raman spectroscopy showed that ultrasonic waves first acted on the amorphous region of starch granules. With the increase of ultrasonic power and time, the relative crystallinity of U-LS-SNPs increased first and then decreased. The group (600 W, 15 min, 3%) had the highest relative crystallinity. The results of nuclear magnetic resonance studies showed that the hydrogen bond and double helix structure of starch were destroyed by ultrasound, and the double helix structure strength of U-LS-SNPs was weakened compared with LS-SNPs. In summary, U-LS-SNPs with the small-sized and the highest crystallinity can be prepared under the conditions of ultrasonic power of 600 W, time of 15 min and material-liquid ratio of 3%.     

Preferred orientation of ZnO nanoparticles formed by post-thermal annealing zinc implanted silica

High quality zinc oxide nanoparticles with (002) preferred orientation were prepared by post-thermal annealing zinc implanted silica at 700 °C using two methods. One method was annealing zinc implanted silica at 700 °C for 2 h in oxygen ambient; the other method was sequentially annealing zinc implanted silica at 700 °C in nitrogen and oxygen ambient for 1 h, respectively. X-ray diffraction (XRD), absorption and microphotoluminescence (micro-PL) results indicated that the latter method could create high quality ZnO nanoparticles with (002) preferred orientation and narrow size-distribution. X-ray photoelectron spectra (XPS) showed the formation of ZnO nanoparticles on a silica surface, where the ZnO nanoparticle content increased with increasing oxidation time in an oxygen environment. The processes of the transformation from Zn to ZnO are discussed.     

Photocatalytic activity of ZnO nanoparticles prepared via submerged arc discharge method

ZnO nanostructures were synthesized through arc discharge of zinc electrodes in deionized (DI) water. X-ray diffraction (XRD) analysis of the prepared nanostructures indicates formation of crystalline ZnO of hexagonal lattice structures. Transmission electron microscopy (TEM) images illustrate rod-like as well as semi spherical ZnO nanoparticles with 15–20 nm diameter range, which were formed during the discharge process with 5 A arc current. The average particle size was found to increase with the increasing arc current. X-ray photoelectron spectroscopy (XPS) analysis confirms formation of ZnO at the surface of the nanoparticles. Surface area of the sample prepared at 5 A arc current, measured by BET analysis, was 34 m²/g. Photodegradation of Rhodamine B (Rh. B) shows that the prepared samples at lower currents have a higher photocatalytic activity due to larger surface area and smaller particle size.     

Structural and morphological characterizations of ZnO films grown on GaAs substrates by MOCVD

The production of boron carbide (B₄C) nanoparticles was investigated in a conventional high temperature furnace reactor. The reaction was carried out by heating a mixture of amorphous carbon and amorphous boron at 1550 °C to efficiently obtain a quantity of B₄C. Scanning electron microscopy studies showed the average size of B₄C particles was 200 nm, ranging from 50 nm to 350 nm. X-ray diffraction transmission electron microscopy and electron diffraction studies indicated that the prepared nanoparticles were crystalline B₄C with a high density twin structure. High resolution transmission electron microscopy and selected area diffraction were also used to further characterize the structure of the prepared B₄C particles, while energy dispersive spectroscopy and electron energy loss spectroscopy were used to determine the stoichiometry of the product. A solid state diffusion reaction mechanism is proposed.     

Synthesis and characterization of a polyaniline-modified SnO<Subscript>2</Subscript> nanocomposite

Polyaniline-modified tin oxide and tin oxide nanoparticles were synthesized using a solution route technique. The obtained pristine products were characterized with X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and optical absorption spectroscopy. Thermogravimetric analysis results showed that the polyaniline-modified SnO₂ nanoparticles exhibit higher thermal stability than the SnO₂ nanoparticles. Scanning electron microscopy analysis on the as-synthesized powders showed spherical particle in the range of 50–100 nm.     

Microwave irradiation on carbon black: Studies on the transformation of particles into nano-balls,nano-sticks and nano-onion like structures

The solid-state transformation behavior of carbon black (CB) nanoparticles after irradiated with microwave energy was studied with and without influence of a metal catalyst. The CB sample was exposed to microwave radiation at power of 900 W from the oven and collected after 15 min and after 30 min and 45 min of irradiation. The samples were characterized using X-ray diffraction measurements, Raman spectroscopy, scanning electron microscopy, high-resolution transmission electron microscopy (HRTEM) and thermogravimetric analysis. Characterization of the samples prepared without catalyst shows that microwave irradiation can transform CB nanoparticles into nano–balls and nano–stick like structures. While nanoballs of almost 300–500 nm diameter are visible in all the samples irrespective of microwave irradiation time, amorphous nano-stick like structure are present only in the sample collected after 30 min of microwave irradiation. CB irradiated together with a metal catalyst resulted in metal-encapsulated onion like structures with perfectly arranged graphene layers.     

非荧光硫化锌纳米簇的合成与表征

合成硫化锌纳米簇并对其进行表征,建立一种利用硫化锌纳米簇的阳离子交换(CX)反应检测痕量生物分子的方法。采用水热法合成非荧光硫化锌纳米簇(NCCs)并对其进行表征。纳米簇的性能直接影响检测结果。通过透射电镜图像和X射线衍射可知,纳米簇是多孔的,可以通过快速阳离子交换反应从纳米簇中释放大量的Zn2+,在锌响应试剂的作用下产生荧光信号进行荧光检测。其晶体的外部比内部排列松散,有利于快速阳离子交换,其晶体尺寸大小与加热时间有关。通过比表面积检测法测定纳米簇的表面积和孔径表明,最小的纳米簇拥有相对较大的表面积及较高的阳离子交换效率。实验了三种释放方法(酸溶解法、阳离子交换法和微波辅助阳离子交换法)对Zn2+释放性能的影响,结果表明,微波辅助阳离子交换法信噪比较高,操作简便,可用于硫化锌纳米簇免疫测定法中。比较了Zn2+的释放效率和目标结合力与平均直径之间的关系,结果表明纳米簇尺寸为44 nm时表现出最高的阳离子交换效率。结论：所有这些特点,使ZnS纳米簇阳离子交换放大器在痕量生物分子检测方面成为高度灵敏、生物相容性好、低廉环保的检测工具。     

Effect of impurity concentration on optical and magnetic properties in ZnS:Cu nanoparticles

To obtain enhanced room temperature ferromagnetism (RTFM) along with the increase in optical bandgap in the compound semiconductors has been an interesting topic. Here, we report RTFM along with increase in energy bandgap in chemically synthesized Zn_1−xCu_xS (0 ≤ x ≤ 0.04) DMS nanoparticles. Structural properties of the synthesized samples studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) show the formation of cubic phase Cu doped ZnS nanoparticles of ~3–5 nm size. An intrinsic weak ferromagnetic behavior was observed in pure ZnS sample (at 300 K) which got increased in Cu doped samples and was understood due to defect induced ferromagnetism. UV–vis measurement showed increase in the energy bandgap with the increase in Cu doping. The PL study suggested the presence of sulfur and zinc vacancies and surface defects which were understood contributing to the intrinsic FM behavior.     

Effect of preparation conditions on the microstructural characteristics and optical properties of oxidized zinc films

Thin films of zinc (Zn) were deposited onto glass substrates (maintained at room temperature) by thermal evaporation under vacuum. The metallic zinc films were submitted to thermal oxidation in air at 670 K and 770 K, respectively, for 5–90 min, in order to obtain zinc oxide (ZnO) thin films. X-ray diffraction patterns revealed that the ZnO thin films were polycrystalline and had a wurtzite (hexagonal) structure. The morphology of the prepared ZnO thin films was investigated using atomic force microscopy and scanning electron microscopy techniques. Transmission spectra were recorded in the spectral domain from 300 nm to 1400 nm. The optical energy bandgap calculated from the absorption spectra (supposing allowed direct transitions) was in the range 3.05–3.30 eV.     

Changes of structure and composition of a zinc ion-implanted silicon surface during nanoparticle formation upon thermal treatment

Data from investigating the formation of nanoparticles (NPs) on a surface of silicon wafers after zinc ion implantation and thermal annealing are presented. The investigation is conducted by means of trans-mission electron microscopy, electron diffraction analysis, energy dispersive microanalysis, scanning tunneling microscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy. It is found that on their surfaces, the implanted samples have only films of amorphous silicon containing implanted zinc, oxygen, and carbon contamination. Thermal treatment in the range of 400–800°C leads to the formation NP with 20–50 nm wide and 10 nm tall on a wafer’s surface, plus a silicon oxide layer about 20 nm thick. NPs are composed of zinc compounds of the ZnO, ZnSiO₃, or Zn₂SiO₄ types. These NPs disappear after annealing at 1000°C.     

Effects of electron-beam irradiation on structural,electrical, and optical properties of amorphous indium gallium zinc oxide thin films

High-energy electron-beam irradiation of indium gallium zinc oxide (IGZO) films improved the short-range arrangement. The increase in band gap was used as an indication of such improvement. X-ray diffraction confirmed that the films treated with a DC voltage of 2–4.5 kV for duration of up to 35 min are in the amorphous state or nanocrystalline phase. Higher energy electron-beam irradiation led to increased conductivity, which mainly comes from the drastic increase in electron concentration. Electron-beam treatment could be a viable route to improve the contact resistance between the source/drain and channel layer in thin-film transistor devices.     

Nanocomposite materials based on poly(vinyl chloride) and bovine serum albumin modified ZnO through ultrasonic irradiation as a green technique: Optical,thermal, mechanical and morphological properties

In this project, physicochemical properties of poly(vinyl chloride) (PVC) reinforced by ZnO nanoparticles (NPs) were studied. Firstly, ZnO NPs were modified with bovine serum albumin (BSA) as an organo-modifier and biocompatible substance through ultrasound irradiation as environmental friendly, low cost and rapid means. Nanocomposite (NC) films were prepared by loadings of various ratios of ZnO/BSA NPs (3, 6 and 9 wt%) inside the PVC. Structural morphology and physical properties of the ZnO-BSA NPs and NC films were investigated via Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis (TGA), transmission electron microscopy and field emission scanning electron microscopy. According to the obtained information from the TGA, an increase in the thermal stability can be clearly observed. Also the results of contact angle analysis indicated with increasing percent of ZnO/BSA NPs into PVC the hydrophilic behaviors of NCs were increased.