A Single Electrochemical Probe Used for Analysis of Multiple Nucleic Acid Sequences

Electrochemical hybridization sensors have been explored extensively for analysis of specific nucleic acids. However, commercialization of the platform is hindered by the need for attachment of separate oligonucleotide probes complementary to a RNA or DNA target to an electrode's surface. Here we demonstrate that a single probe can be used to analyze several nucleic acid targets with high selectivity and low cost. The universal electrochemical four‐way junction (4J)‐forming (UE4J) sensor consists of a universal DNA stem‐loop (USL) probe attached to the electrode's surface and two adaptor strands (m and f) which hybridize to the USL probe and the analyte to form a 4J associate. The m adaptor strand was conjugated with a methylene blue redox marker for signal ON sensing and monitored using square wave voltammetry. We demonstrated that a single sensor can be used for detection of several different DNA/RNA sequences and can be regenerated in 30 seconds by a simple water rinse. The UE4J sensor enables a high selectivity by recognition of a single base substitution, even at room temperature. The UE4J sensor opens a venue for a re‐useable universal platform that can be adopted at low cost for the analysis of DNA or RNA targets.     

MVF Sensor Enables Analysis of Nucleic Acids with Stable Secondary Structures

One major challenge in nucleic acids analysis by hybridization probes is a compromise between the probe's tight binding and sequence‐selective recognition of nucleic acid targets folded into stable secondary structures. We have been developing a four‐way junction (4WJ)‐based sensor that consists of a universal stem‐loop (USL) probe immobilized on an electrode surface and two adaptor strands (M and F). The sensor was shown to be highly selective towards single base mismatches at room temperature, able to detect multiple targets using the same USL probe, and have improved ability to detect folded nucleic acids. However, some nucleic acid targets, including natural RNA, are folded into very stable secondary and tertiary structures, which may represent a challenge even for the 4WJ sensors. This work describes a new sensor, named MVF since it uses three probe stands M, V and F, which further improves the performance of 4WJ sensors with folded targets. The MVF sensor interrogating a 16S rRNA NASBA amplicon with calculated folding energy of ?32.82 kcal/mol has demonstrated 2.5‐fold improvement in a signal‐to‐background ratio in comparison with a 4WJ sensor lacking strand V. The proposed design can be used as a general strategy in the analysis of folded nucleic acids including natural RNA.     

Binary malachite green aptamer for fluorescent detection of nucleic acids

A new probe that can fluorescently report the presence of specific nucleic acids in solution with extremely high selectivity was developed. The probe consists of malachite green-a triphenylmethane dye-and two short RNA strands, each of which comprises a fragment complementary to an analyte molecule and a fragment of a malachite green aptamer (MGA). The two RNA strands form MGA upon hybridization to the adjacent positions of the nucleic acid analyte. MGA is able to bind malachite green and enhance the fluorescence of the dye, thus monitoring the presence of the nucleic acid in solution. The probe reliably discriminates against 41 out of 42 possible single nucleotide substitutions in 14-mer DNA analyte at room temperature in physiological buffer. Consisting of unmodified RNA strands, which can be expressed in living cells, binary MGA probe represents a promising instrument for real-time nucleic acid monitoring in vivo.     

A binary DNA probe for highly specific nucleic Acid recognition

A new concept for nucleic acid probe design is reported. The extremely high selectivity of the probe is predetermined by cooperative hybridization of the two relatively short (10 nucleotide) DNA hairpin fragments to the analyte. A binary DNA probe fluorescently reports the presence of 0.5% of the analyte in excess amount of a single base substituted oligodeoxyribonucleotide and distinguishes single nucleotide substitutions at any position of a 20-mer oligonucleotide at room temperature.     

Inhibition of Influenza Virus Replication in MDCK Cells by Circular Dumbbell RNA/DNA Chimeras with Closed Alkyl Loop Structures

We have demonstrated that a new type of circular dumbbell RNA/DNA chimeric oligonucleotide (CDRDON) with two closed nucleotide or alkyl loop structures (hexa‐ethylene glycol) inhibits influenza virus A replication in MDCK cells. The enzymatic synthesis of circular dumbbell RNA/DNA chimeric oligonucleotides was achieved by enzymatically ligating a self‐complementary phosphorylated oligonucleotide with T4‐RNA ligase. The CDRDON‐Al, with two closed alkyl loop structures, showed higher nuclease resistance, hybridization, and cellular uptake than the anti‐S‐ODN and the CDRDON, with two closed nucleotide hairpin‐loop structures. The circular dumbbell RNA/DNA chimeric oligonucleotide (CDRDON‐Al‐PB2‐as), containing an AUG initiation‐codon sequence as the target of PB2, showed highly inhibitory effects on influenza A virus RNA expression. The limited toxicity of unmodified phosphodiester oligonucleotides and the sequence‐specific binding to target mRNA indicate that circular dumbbell RNA/DNA chimeric phosphodiester oligonucleotides can be used with intact cells, and may prevent viral replication in culture.     

A Novel DNA Probe Based on Molecularly Imprinted Polymer Modified Electrode for the Electrochemical Monitoring of DNA

A DNA probe that was based on methylene blue (MB) imprinted polyvinyl pyridine polymer (MIP) modified carbon paste electrodes were developed for the first time for electrochemical monitoring of DNA. Probes were built up by adsorbing MB onto modified electrodes prior to DNA immobilization. It was shown that DNA strongly immobilizes on MIP modified electrodes when MB was adsorbed in advance of DNA immobilization. The performance of the MB imprinted polymer modified carbon paste electrodes (MIP‐CPE) to rebind the template molecule (MB) were compared to those of control polymer modified (non‐imprinted polymer NIP‐CPE) and bare (CPE) electrodes. Electrochemical signal resulting from the oxidation of guanine moiety of the immobilized probe DNA was high enough on the constructed platform, implicating that probes of this kind could be favorably used for DNA analysis. These probes exhibited high selectivity for its complementary DNA sequences (target). HBV‐DNA hybridization was studied to evaluate the selectivity of the probes for complementary, non‐complementary and mismatch sequences. The detection limit of the probe for the target DNA was 8.72 µg/mL (1.38 µM), which was better than those attained by some earlier DNA sensor studies.     

Increasing the Sensitivity and Single‐Base Mismatch Selectivity of the Molecular Beacon Using Graphene Oxide as the “Nanoquencher”

Here, we report a novel, highly sensitive, selective and economical molecular beacon using graphene oxide as the “nanoquencher”. This novel molecular beacon system contains a hairpin‐structured fluorophore‐labeled oligonucleotide and a graphene oxide sheet. The strong interaction between hairpin‐structured oligonucleotide and graphene oxide keep them in close proximity, facilitating the fluorescence quenching of the fluorophore by graphene oxide. In the presence of a complementary target DNA, the binding between hairpin‐structured oligonucleotide and target DNA will disturb the interaction between hairpin‐structured oligonucleotide and graphene oxide, and release the oligonucleotide from graphene oxide, resulting in restoration of fluorophore fluorescence. In the present study, we show that this novel graphene oxide quenched molecular beacon can be used to detect target DNA with higher sensitivity and single‐base mismatch selectivity compared to the conventional molecular beacon.     

A versatile label-free and signal-on electrochemical biosensing platform based on triplex-forming oligonucleotide probe

Nucleic acid and protein assays are very important in modern life sciences, and the recently developed triplex-forming oligonucleotide probes provide a unique means for biological analysis of different kinds of analytes. Herein, we report a label-free and signal-on electrochemical sensor for the detection of specific targets, which is based on the triple-helix structure formation between the hairpin molecular beacon and the capture probe through the intermolecular DNA hybridization induced by Watson-Crick and Hoogsteen base pairings. Upon the introduction of a specific target, the triple-helical stem region is dissembled to liberate the hemin aptamer, and a G-quadruplex− hemin complex can be formed in the presence of K⁺ and hemin on the electrode surface to give an electrochemical response, thus signaling the presence of the target. With the use of Human Immunodeficiency Virus type 1 (HIV-1) as a proof-of-principle analyte, we first demonstrated this approach by using a molecular beacon, which consists of a central section with the DNA sequence complementary to HIV-1, flanked by two arm segments. This newly designed protocol provides an ultrasensitive electrochemical detection of HIV-1 with a limit of detection down to 0.054 nM, and also exhibit good selectivity. Therefore, the as-proposed strategy holds a great potential for early diagnosis in gene-related diseases, and with further development, it could be used as a universal protocol for the detection of various DNA sequences and may be extended for the detection of aptamer-binding molecules.     

Reversing DNA-mediated adhesion at a fixed temperature

Recognition-based assembly of micron- to nano-sized colloidal particles functionalized with DNA has generated great interest in the past decade; however, reversing the assembly process is typically achieved by thermal denaturation of the oligonucleotide duplexes. Here, we report an alternative disassembly approach at a fixed temperature using competitive hybridization events between immobilized and soluble oligonucleotide strands. Microspheres are first aggregated via primary hybridization events between immobilized DNA strands with a weak, but sufficient, affinity for partner strands to link complementary surfaces together. To reverse the aggregation process, soluble oligonucleotides are then added to competitively displace the original hybridization partners through secondary hybridization events. Using flow cytometry to quantify hybridization events and microscopy to examine DNA-mediated aggregation and redispersion, we found that the efficiency of competitive displacement is based upon (1) the difference in base pair matches between the primary and secondary target for the same probe sequence and (2) the concentration of hybridizing oligonucleotides participating in microsphere aggregation. To the best of our knowledge, this study is the first to employ DNA hybridization events to mediate reversible adhesion between colloidal particles at a fixed temperature.     

Formation of a Ligand‐Assisted Complex of Two RNA Hairpin Loops

The hairpin structure is one of the most common secondary structures in RNA and holds a central position in the stream of RNA folding from a non‐structured RNA to structurally complex and functional ribonucleoproteins. Since the RNA secondary structure is strongly correlated to the function and can be modulated by the binding of small molecules, we have investigated the modulation of RNA folding by a ligand‐assisted formation of loop–loop complexes of two RNA hairpin loops. With a ligand (NCT6), designed based on the ligand binding to the G–G mismatches in double‐stranded DNA, we successfully demonstrated the formation of both inter‐ and intra‐molecular NCT6‐assisted complex of two RNA hairpin loops. NCT6 selectively bound to the two hairpin loops containing (CGG)₃ in the loop region. Native polyacrylamide gel electrophoresis analysis of two doubly‐labeled RNA hairpin loops clearly showed the formation of intermolecular NCT6‐assisted loop–loop complex. Förster resonance energy‐transfer studies of RNA constructs containing two hairpin loops, in which each hairpin was labeled with Alexa488 and Cy3 fluorophores, showed the conformational change of the RNA constructs upon binding of NCT6. These experimental data showed that NCT6 simultaneously bound to two hairpin RNAs at the loop region, and can induce the conformational change of the RNA molecule. These data strongly support that NCT6 functions as molecular glue for two hairpin RNAs.     

A Molecular Tuning Fork in Single‐Molecule Mechanochemical Sensing

The separate arrangement of target recognition and signal transduction in conventional biosensors often compromises the real‐time response and can introduce additional noise. To address these issues, we combined analyte recognition and signal reporting by mechanochemical coupling in a single‐molecule DNA template. We incorporated a DNA hairpin as a mechanophore in the template, which, under a specific force, undergoes stochastic transitions between folded and unfolded hairpin structures (mechanoescence). Reminiscent of a tuning fork that vibrates at a fixed frequency, the device was classified as a molecular tuning fork (MTF). By monitoring the lifetime of the folded and unfolded hairpins with equal populations, we were able to differentiate between the mono‐ and bivalent binding modes during individual antibody‐antigen binding events. We anticipate these mechanospectroscopic concepts and methods will be instrumental for the development of novel bioanalyses.     

Terbium fluorescence as a sensitive,inexpensive probe for UV-induced damage in nucleic acids

Much effort has been focused on developing methods for detecting damaged nucleic acids. However, almost all of the proposed methods consist of multi-step procedures, are limited, require expensive instruments, or suffer from a high level of interferences. In this paper, we present a novel simple, inexpensive, mix-and-read assay that is generally applicable to nucleic acid damage and uses the enhanced luminescence due to energy transfer from nucleic acids to terbium(III) (Tb³⁺). Single-stranded oligonucleotides greatly enhance the Tb³⁺ emission, but duplex DNA does not. With the use of a DNA hairpin probe complementary to the oligonucleotide of interest, the Tb³⁺/hairpin probe is applied to detect ultraviolet (UV)-induced DNA damage. The hairpin probe hybridizes only with the undamaged DNA. However, the damaged DNA remains single-stranded and enhances the intrinsic fluorescence of Tb³⁺, producing a detectable signal directly proportional to the amount of DNA damage. This allows the Tb³⁺/hairpin probe to be used for sensitive quantification of UV-induced DNA damage. The Tb³⁺/hairpin probe showed superior selectivity to DNA damage compared to conventional molecular beacons probes (MBs) and its sensitivity is more than 2.5 times higher than MBs with a limit of detection of 4.36 ± 1.2 nM. In addition, this probe is easier to synthesize and more than eight times cheaper than MBs, which makes its use recommended for high-throughput, quantitative analysis of DNA damage.     

DNAzyme-embedded hyperbranched DNA dendrimers as signal amplifiers for colorimetric determination of nucleic acids

A DNAzyme-embedded hyperbranched DNA dendrimer is used as a colorimetric signal amplifier in an ultrasensitive detection scheme for nucleic acids. The hyperbranched DNA dendrimers were constructed by single-step autonomous self-assembly of three structure-free DNA monomers. A cascade of self-assembly reactions between the first and second strands leads to the formation of linear DNA concatemers containing overhang flank fragments. The third strand, which bears a peroxidase-mimicking DNAzyme domain, serves as a bridge to trigger self-assembly between the first and second strands across the side chain direction. This results in a chain branching growth of the DNAzyme-embedded DNA dendrimer. This signal amplifier was incorporated into the streptavidin-biotin detection system which comprises an adaptor oligonucleotide and a biotinylated capture probe. The resulting platform is capable of detecting a nucleic acid target with an LOD as low as 0.8 fM. Such sensitivity is comparable if not superior to most of the reported enzyme-free (and even enzyme-assisted) signal amplification strategies. The DNA dendrimer based method is expected to provide a universal platform for extraordinary signal enhancement in detecting other nucleic acid biomarkers by altering the respective sequences of adaptor and capture probe.

Open image in new window

Graphical abstract Schematic of an assembly of a DNAzyme-embedded hyperbranched DNA dendrimer which operates as a signal amplifier for nucleic acids detection. The nanostructure is constructed by autonomous self-assembly of three DNA monomers. Colored letters represent each domain, and complementary domains are marked by asterisk. Domain d represents the DNAzyme sequence.

     

Effect of secondary structure on the thermodynamics and kinetics of PNA hybridization to DNA hairpins.

The binding of a series of PNA and DNA probes to a group of unusually stable DNA hairpins of the tetraloop motif has been observed using absorbance hypochromicity (ABS), circular dichroism (CD), and a colorimetric assay for PNA/DNA duplex detection. These results indicate that both stable PNA-DNA and DNA-DNA duplexes can be formed with these target hairpins, even when the melting temperatures for the resulting duplexes are up to 50 degrees C lower than that of the hairpin target. Both hairpin/single-stranded and hairpin/hairpin interactions are considered in the scope of these studies. Secondary structures in both target and probe molecules are shown to depress the melting temperatures and free energies of the probe-target duplexes. Kinetic analysis of hybridization yields reaction rates that are up to 160-fold slower than hybridization between two unstructured strands. The thermodynamic and kinetic obstacles to hybridization imposed by both target and probe secondary structure are significant concerns for the continued development of antisense agents and especially diagnostic probes.     

Development of Flow Cytometric Assay for Detecting Papillary Thyroid Carcinoma Related hsa-miR-146b-5p through Toehold-Mediated Strand Displacement Reaction on Magnetic Beads

In this work, a simple enzyme-free flow cytometric assay (termed as TSDR-based flow cytometric assay) has been developed for the detection of papillary thyroid carcinoma (PTC)-related microRNA (miRNA), hsa-miR-146b-5p with high performance through the toehold-mediated strand displacement reaction (TSDR) on magnetic beads (MBs). The complementary single-stranded DNA (ssDNA) probe of hsa-miR-146b-5p was first immobilized on the surface of MB, which can partly hybridize with the carboxy-fluorescein (FAM)-modified ssDNA, resulting in strong fluorescence emission. In the presence of hsa-miR-146b-5p, the TSDR is trigged, and the FAM-modified ssDNA is released form the MB surface due to the formation of DNA/RNA heteroduplexes on the MB surface. The fluorescence emission change of MBs can be easily read by flow cytometry and is strongly dependent on the concentration of hsa-miR-146b-5p. Under optimal conditions, the TSDR-based flow cytometric assay exhibits good specificity, a wide linear range from 5 to 5000 pM and a relatively low detection limit (LOD, 3σ) of 4.21 pM. Moreover, the practicability of the assay was demonstrated by the analysis of hsa-miR-146b-5p amounts in different PTC cells and clinical PTC tissues.     

A new peptide nucleotide acid biosensor for electrochemical detection of single nucleotide polymorphism in duplex DNA via triplex structure formation

In this paper, we report a new PNA biosensor for electrochemical detection of point mutation or single nucleotide polymorphism (SNP) in p53 gene corresponding oligonucleotide based on PNA/ds-DNA triplex formation following hybridization of PNA probe with double-stranded DNA (ds-DNA) sample without denaturing the ds-DNA into single-stranded DNA (ss-DNA). As p53 gene is mutated in many human tumors, this research is useful for cancer therapy and genomic study. In this approach, methylene blue (MB) is used for electrochemical signal generation and the interaction between MB and oligonucleotides is studied by differential pulse voltammety (DPV). Probe-modified electrode is prepared by self-assembled monolayer (SAM) formation of thiolated PNA molecules on the surface of Au electrode. A significant increase in the reduction signal of MB following hybridization of the probe with the complementary double-stranded oligonucleotide (ds-oligonucleotide) confirms the function of the biosensor. The selectivity of the PNA sensor is investigated by non-complementary ds-oligonucleotides and the results support the ability of the sensor to detect single-base mismatch directly on ds-oligonucleotide. The influence of probe and ds-DNA concentrations on the effective discrimination against complementary sequence and point mutation is studied and the concentration of 10^?6 M is selected as appropriate concentration. Diagnostic performance of the biosensor is described and the detection limit is found to be 4.15 × 10^?12 M.     

Capillary electrophoresis,a method for the determination of nucleic acid ligands covalently attached to quantum dots representing a donor of Förster resonance energy transfer

The synthesis and determination of the structure of a Förster resonance energy transfer probe intended for the detection of specific nucleic acid sequences are described here. The probe is based on the hybridization of oligonucleotide modified quantum dots with a fluorescently labeled nucleic acid sample resulting in changes of the fluorescence emission due to the energy transfer effect. The stoichiometry distribution of oligonucleotides conjugated to quantum dots was determined by capillary electrophoresis separation. The results indicate that one to four molecules of oligonucleotide are conjugated to the surface of a single nanoparticle. This conclusion is confirmed by the course of the dependence of Förster resonance energy transfer efficiency on the concentration of fluorescently labeled complementary single‐stranded nucleic acid, showing saturation. While the energy transfer efficiency of the probe hybridized with complementary nucleic acid strands was 30%, negligible efficiency was observed with a noncomplementary strand.     

Differentiate RNA Single‐Stranded Region of the Branched Structures and Hairpin Loops by an Octahedral Cobalt(II) Complex

Single‐stranded RNA molecules usually include secondary structural elements such as bulges, internal loops, and hairpin loops. These RNA secondary structural elements are often essential for the biological activity and functions of the RNA molecule. Chemical probe Co^II(HAPP)(TFA)₂ in the presence of H₂O₂ is found to differentiate single‐stranded RNA from branched structures and hairpin loops. This study uses Co^II(HAPP)(TFA)2 to analyze the structures of two RNA molecules: a fragment of HIV TAR RNA (TAR‐27) and the catalytic domain 5 of group II intron (D5‐29). The electrophoretic mobility of TAR‐27 does not shift in the presence of Co^II(HAPP)(TFA)₂, suggesting that the reagent does not change the conformation of RNA substrate. Cleavage of the RNA substrates by Co^II(HAPP)(TFA)₂ unambiguously differentiated RNA internal looped structures from hairpin loops. The results show that Co^II(HAPP)(TFA)2 is a sensitive, informative and convenient tool for analysis of RNA secondary structures.     

Lipophilic oligonucleotides spontaneously insert into lipid membranes, bind complementary DNA strands, and sequester into lipid-disordered domains

For the development of surface functionalized bilayers, we have synthesized lipophilic oligonucleotides to combine the molecular recognition mechanism of nucleic acids and the self-assembly characteristics of lipids in planar membranes. A lipophilic oligonucleotide consisting of 21 thymidine units and two lipophilic nucleotides with an alpha-tocopherol moiety as a lipophilic anchor was synthesized using solid-phase methods with a phosphoramadite strategy. The interaction of the water soluble lipophilic oligonucleotide with vesicular lipid membranes and its capability to bind complementary DNA strands was studied using complementary methods such as NMR, EPR, DSC, fluorescence spectroscopy, and fluorescence microscopy. This oligonucleotide inserted stably into preformed membranes from the aqueous phase. Thereby, no significant perturbation of the lipid bilayer and its stability was observed. However, the non-lipidated end of the oligonucleotide is exposed to the aqueous environment, is relatively mobile, and is free to interact with complementary DNA strands. Binding of the complementary single-stranded DNA molecules is fast and accomplished by the formation of Watson-Crick base pairs, which was confirmed by 1H NMR chemical shift analysis and fluorescence resonance energy transfer. The molecular structure of the membrane bound DNA double helix is very similar to the free double-stranded DNA. Further, the membrane bound DNA double strands also undergo regular melting. Finally, in raft-like membrane mixtures, the lipophilic oligonucleotide was shown to preferentially sequester into liquid-disordered membrane domains.