Modelling (vapour + liquid) and (vapour + liquid + liquid) equilibria of {water (H2O) + methanol (MeOH) + dimethyl ether (DME) + carbon dioxide (CO2)} quaternary system using the Peng–Robinson EoS with Wong–Sandler mixing rule

The (vapour + liquid) equilibria (VLE) and (vapour + liquid + liquid) equilibria (VLLE) binary data from literature were correlated using the Peng–Robinson (PR) equation of state (EoS) with the Wong–Sandler mixing rule (WS). Two group contribution activity models were used in the PRWS: UNIFAC–PSRK and UNIFAC–Lby. The systems were successfully extrapolated from the binary systems to ternary and quaternary systems. Results indicate that the PRWS–UNIFAC–PSRK generally displays a better performance than the PRWS–UNIFAC–Lby.     

A potentiometric study of acid–base properties of the (phenol + phenolate) systems in acetonitrile and, (acetonitrile + cyclohexane) solvent system

Acid–base equilibria were studied potentiometrically in (phenol + phenolate) systems involving nine substituted phenols with both electron-donating and electron-accepting substituents in a polar protophobic aprotic solvent, acetonitrile. To estimate the influence of the polarity of the medium on acid dissociation and anionic homoconjugation equilibria, the equilibrium constants were also determined in an (acetonitrile + cyclohexane) solvent in which the latter was a diluent that lowered the dielectric permittivity of the reaction medium, and compared with those determined in acetonitrile.     

(Vapour + liquid) equilibria for the binary mixtures (cis-pinane + α-pinene) and (cis-pinane + 1-butanol)

The isothermal and isobaric (vapour + liquid) equilibria for (cis-pinane + α-pinene) and (cis-pinane + 1-butanol) measured with an inclined ebulliometer are presented. The experimental results are analysed using the UNIQUAC equation with the temperature-dependence binary parameters with satisfactory results. Experimental vapour pressures of cis-pinane are also included.     

Thermodynamics of the oxidation–reduction reaction {2 glutathionered(aq) + NADPox(aq)=glutathioneox(aq) + NADPred(aq)}

Microcalorimetry, spectrophotometry, and high-performance liquid chromatography (h.p.l.c.) have been used to conduct a thermodynamic investigation of the glutathione reductase catalyzed reaction {2 glutathione_red(aq) + NADP_ox(aq)=glutathione_ox(aq) + NADP_red(aq)}. The reaction involves the breaking of a disulfide bond and is of particular importance because of the role glutathione_red plays in the repair of enzymes. The measured values of the apparent equilibrium constant K^′ for this reaction ranged from 0.5 to 69 and were measured over a range of temperature (288.15 K to 303.15 K), pH (6.58 to 8.68), and ionic strength I_m (0.091 mol · kg⁻¹ to 0.90 mol · kg⁻¹). The results of the equilibrium and calorimetric measurements were analyzed in terms of a chemical equilibrium model that accounts for the multiplicity of ionic states of the reactants and products. These calculations led to values of thermodynamic quantities at T=298.15 K and I_m=0 for a chemical reference reaction that involves specific ionic forms. Thus, for the reaction {2 glutathione_red⁻(aq) + NADP_ox³⁻(aq)=glutathione_ox²⁻(aq) + NADP_red⁴⁻(aq) + H⁺(aq)}, the equilibrium constant K=(6.5±4.4)·10⁻¹¹, the standard molar enthalpy of reaction Δ_rH^o_m=(6.9±3.0) kJ · mol⁻¹, the standard molar Gibbs free energy change Δ_rG^o_m=(58.1±1.7) kJ · mol⁻¹, and the standard molar entropy change Δ_rS^o_m=−(172±12) J · K⁻¹ · mol⁻¹. Under approximately physiological conditions (T=311.15 K, pH=7.0, and I_m=0.25 mol · kg⁻¹ the apparent equilibrium constant K^′≈0.013. The results of the several studies of this reaction from the literature have also been examined and analyzed using the chemical equilibrium model. It was found that much of the literature is in agreement with the results of this study. Use of our results together with a value from the literature for the standard electromotive force E^o for the NADP redox reaction leads to E^o=0.166 V (T=298.15 K and I=0) for the glutathione redox reaction {glutathione_ox²⁻(aq) + 2 H⁺(aq) + 2 e⁻=2 glutathione_red⁻(aq)}. The thermodynamic results obtained in this study also permit the calculation of the standard apparent electromotive force E^′o for the biochemical redox reaction {glutathione_ox(aq) + 2 e⁻=2 glutathione_red(aq)} over a wide range of temperature, pH, and ionic strength. At T=298.15 K, I=0.25 mol · kg⁻¹, and pH=7.0, the calculated value of E^′o is −0.265 V.     

(Solid + liquid) equilibria for the ternary system (CsBr + LnBr3 + H2O) (Ln = Pr,Nd, Sm) at T = 298.2 K and atmospheric pressure,thermal and fluorescent properties of Cs2LnBr5·10H2O

The (solid + liquid) phase equilibria of the ternary systems (CsBr + LnBr₃ + H₂O) (Ln = Pr, Nd, Sm) at T = 298.2 K were studied by the isothermal solubility method. The solid phases formed in the systems were determined by the Schreinemakers wet residues technique, and the corresponding phase diagrams were constructed based on the measured data. Each of the phase diagrams, with two invariant points, three univariant curves, and three crystallization regions corresponding to CsBr, Cs₂LnBr₅·10H₂O and LnBr₃·nH₂O (n = 6, 7), respectively, belongs to the same category. The new solid phase compounds Cs₂LnBr₅·10H₂O are incongruently soluble in water, and they were characterized by chemical analysis, XRD and TG-DTG techniques. The standard molar enthalpies of solution of Cs₂PrBr₅·10H₂O, Cs₂NdBr₅·10H₂O and Cs₂SmBr₅·10H₂O in water were measured to be (52.49 ± 0.48) kJ · mol⁻¹, (49.64 ± 0.49) kJ · mol⁻¹ and (50.17 ± 0.48) kJ · mol⁻¹ by microcalorimetry under the condition of infinite dilution, respectively, and their standard molar enthalpies of formation were determined as being −(4739.7 ± 1.4) kJ · mol⁻¹, −(4728.4 ± 1.4) kJ · mol⁻¹ and −(4724.4 ± 1.4) kJ · mol⁻¹, respectively. The fluorescence excitation and emission spectra of Cs₂PrBr₅·10H₂O, Cs₂NdBr₅·10H₂O and Cs₂SmBr₅·10H₂O were measured. The results show that the upconversion spectra of the three new solid phase compounds all exhibit a peak at 524 nm when excited at 785 nm.     

Volumetric behaviour of the (2,2,4-trimethylpentane + methylbenzene + butan-1-ol) ternary system and its binary sub-systems within the temperature range (298.15–328.15) K

Densities and speeds of sound of the (2,2,4-trimethylpentane + methylbenzene + butan-1-ol) ternary system as well as all its binary sub-systems were measured at four temperatures, namely 298.15 K, 308.15 K, 318.15 K, and 328.15 K at atmospheric pressure by a vibrating-tube densimeter DSA 5000. The binary (isooctane + toluene) system was studied previously. Excess quantities (molar volume, adiabatic compressibility, and isobaric thermal expansivity) of the mixtures studied were calculated from the experimental densities and speed of sounds. The excess molar volume data were correlated using the Redlich–Kister equation. Both the positive and S-shaped excess molar volume curves were found for the systems studied. The excess molar volumes versus concentration of binary systems differed in the shape and temperature dependence. The experimental binary data were compared with literature data. The experimental excess molar volumes were analyzed by means of the Extended Real Associated Solution (ERAS) model. The experimental data and the ERAS model can help to estimate real behaviour of the systems studied.     

The (p, ρ, T) properties and apparent molar volumes Vϕ of (ZnBr2 + C2H5OH)

The (p, ρ, T) properties and apparent molar volumes V_? of ZnBr₂ in ethanol at temperatures (293.15 to 393.15) K and pressures up to p = 40 MPa are reported. The measurements were made with a recently developed vibration-tube densimeter. The system was calibrated using double-distilled water, methanol, ethanol, and aqueous NaCl solutions. The experiments were carried out at molalities of m = (0.05681, 0.16958, 0.30426, 0.43835, 0.93055, 1.49016, and 1.88723) mol · kg^?1 using zinc bromide. An empirical correlation for the density of (ZnBr₂ + C₂H₅OH) with pressure, temperature, and molality has been derived. This equation of state was used to calculate other volumetric properties such as isothermal compressibility, isobaric thermal expansibility, the differences in specific heat capacities at constant pressures and volumes, apparent molar volumes of ZnBr₂ in ethanol, and partial molar volumes of both components.     

P, ρ, and T measurements of the (limonene + β-pinene) mixtures

The density, ρ, and two derived properties, isothermal compressibility, κ_T, and the coefficient of cubic expansion, α_P, were obtained for the mixtures of 1-methyl-4-(1-methylethenyl)-cyclohexene, known as limonene, and (1S,5S)-6,6-dimethyl-2-methylenebibyclo[3.1.1]heptane, known as β-pinene, for nine different compositions and the pure components at five pressures from 20 MPa to 40 MPa and six temperatures from 283.15 K to 358.15 K. The experimental uncertainty for ρ, κ_T, and α_P were respectively ±0.5 kg · m⁻³, ±14 TPa⁻¹, and ±0.005k K⁻¹, with k = 2 for all of them. Density behaviour with temperature and pressure was as expected. The values of α_P and κ_T increase with temperature and decrease with increasing pressure. Two different equations of state, conventional SAFT and PC-SAFT, were applied to predict the densities of the mixture. The best predictions were achieved with PC-SAFT.     

Solubilities,densities and refractive indices for the ternary systems ethylene glycol + MCl + H2O (M = Na,K, Rb,Cs) at (15 and 35) °C

The solubilities, densities and refractive indices data for the four ternary systems ethylene glycol + MCl + H₂O (M = Na, K, Rb, Cs) at different temperatures were measured, with mass fractions of ethylene glycol in the range of 0 to 1.0. In all cases, the presence of ethylene glycol significantly reduces the solubility of the salts in aqueous solution. The experimental data of density, refractive index and solubility of saturated solutions for these systems were correlated using polynomial equations as a function of the mass fraction of ethylene glycol. On the other hand, the refractive index and density of unsaturated solutions was also determined for the four ternary systems with varied unsaturated salt concentrations. Values for both the properties were correlated with the salt concentrations and proportions of ethylene glycol in the solutions.     

Phase behaviour of the ternary system {poly(ε-caprolactone) + carbon dioxide + dichloromethane}

Recently, production of biocompatible and biodegradable polymer microparticles has been a matter of growing interest in pharmaceutical and food areas such as drug or active compounds delivery. To conduct production of microparticles, polymeric particle coating, impregnation of active compounds in polymeric films, the knowledge of phase behaviour involving the biodegradable polymer in supercritical carbon dioxide in the presence of a modifier may be needed to allow developing new industrial applications. In this sense, the aim of this work was to investigate the phase behaviour of the ternary system formed by the biodegradable polymer poly(ε-caprolactone) in (carbon dioxide + dichloromethane). Experimental phase transition (bubble and cloud point) values were obtained by applying the static-synthetic method using a variable-volume view cell over the temperature range of (303 to 343) K and pressures up to 21 MPa, in the CO₂ overall composition range of (25–46) wt%, while polymer concentrations studied were (1, 3, 5, and 7) wt%. For the system investigated, depending on the polymer concentration, vapour–liquid, liquid–liquid, and vapour–liquid–liquid phase transitions were verified.     

Ternary (liquid + liquid) equilibria for (water + 2-propanol + α-pinene,or β-pinene) mixtures at four temperatures

Ternary (liquid + liquid) equilibria date for the (water + 2-propanol + α-pinene, or β-pinene) systems were measured at T = (293.15, 298.15, 303.15, and 308.15) K under atmospheric pressure. The experimental results were correlated using the extended and modified UNIQUAC models. The calculated results obtained from the modified UNIQUAC model successfully represent the experimental tie-line data. The temperature influence on liquid-phase equilibria was studied.     

Thermodynamics of the O2/O2− redox couple in molten (LiCl + KCl + Li2O) systems

Activity coefficients of oxide ion were determined by the measurements of the standard formal potential of O₂/O^2? with a boron-doped diamond (BDD) electrode in molten (LiCl + KCl): LiCl:KCl = {58.5:41.5 (eutectic), 65:35, 70:30, 75:25} mol% at T = (673 to 803) K. The activity coefficient decreases with the increase of the LiCl content in the melt: (18.7 ± 1.5, 7.7 ± 1.0, 4.1 ± 0.4, and 1.6 ± 0.1), respectively, at T = 773 K in each melt. The result is explained by the attractive force between Li⁺ and O^2? which is stronger than that between K⁺ and O^2?.     

(Ternary liquid + liquid) equilibria for (water + acetone + α-pinene,or β-pinene,or limonene) mixtures

(Ternary liquid + liquid) equilibria (tie-lines) of (water + acetone + α-pinene) at T = (288.15, 298.15, and 308.15) K and (water + acetone + β-pinene, or limonene) at T = 298.15 K have been measured. The experimental (ternary liquid + liquid) equilibrium data have been correlated successfully by the original UNIQUAC and modified UNIQUAC models. The modified UNIQUAC model reproduced accurately the experimental results for the (water + acetone + α-pinene) system at all the temperatures but fairly agreed with the experimental data for the (water + acetone + β-pinene, or limonene) systems.     

Synthesis,characterization and thermochemistry of Cs(ASP) · nH2O (n = 0, 1)

New compounds of aspartic acid Cs(ASP) · nH₂O (n = 0, 1) have been synthesized and characterized by XRD, IR and Raman spectroscopy as well as TG. The structural formula of this new compound was Cs(ASP) · nH₂O (n = 0, 1). The enthalpy of solution of Cs(ASP) · nH₂O (n = 0, 1) in water were determined. With the incorporation of the standard molar enthalpies of formation of CsOH(aq) and ASP(s), the standard molar enthalpy of formation of −(1202.9 ± 0.2) kJ · mol⁻¹ of Cs(ASP) and −(1490.7 ± 0.2) kJ · mol⁻¹ of Cs(ASP) · H₂O were obtained.