Catalytic Activity of Polymer-Supported Neodymium Complexes in the Polymerization of Butadiene

The IR spectra of neodymium complexes supported on styrene-acrylic acid copolymer were investigated. The complexes possess a bidentate carboxylate structure, and the Nd?O bond in the complexes is highly covalent. The effect of the nature and constitution of the supported neodymium complexes on their activity in butadiene polymerization was studied. The copolymer was prepared in THF or dioxane was better for the synthesis of highly active supported complexes. Polymer-supported neodymium complexes containing about 12 wt% of -COOH gave optimum catalytic activity at a Nd/?COOH mole ratio of 0.20.     

Effect of electrolytes on the surface behavior of rhamnolipids R1 and R2

The surface behavior of solutions of the rhamnolipids, R1 and R2, were investigated in the absence and presence of an electrolyte (NaCl) through surface tension measurements and optical microscopy at pH 6.8. The NaCl concentrations studied are 0.05, 0.5 and 1 M. Electrolytes directly affect the carboxylate groups of the rhamnolipids. The solution/air interface has a net negative charge due to the dissociated carboxylate ions at pH 6.8 with strong repulsive electrostatic forces between the rhamnolipid molecules. This negative charge is shielded by the Na⁺ ions in the electrical double layer in the presence of NaCl, causing the formation of a close-packed monolayer, and a decrease in CMC, and surface tension values. The maximum compaction is observed at 0.5 M NaCl concentrations for R1 and R2 monolayers, with the R1 monolayer more compact than R2. The larger spaces left below the hydrophobic tails of R1 with respect to that of R2, due to the missing second rhamnosyl groups are thought to be responsible for the higher compaction. The rigidity of both R1 and R2 monolayers increases with the electrolyte concentration. The rigidity of the R1 monolayer is greater than that of R2 at all NaCl concentrations due to the lower hydrophilic character of R1. The variation of CMC values as a function of NaCl concentration obtained from the surface tension measurements and critical packing parameter (CPP) calculations show that spherical micelles, bilayer and rod like micelles are formed in the rhamnolipid solutions as a function of the NaCl concentration. The results of optical microscopy supported these aggregation states indicating lamellar nematic liquid crystal, cubic lamellar and hexagonal liquid crystal phases in R1 and R2 solutions depending on the NaCl concentration.     

Effect of support on the synergy in HDS of thiophene and HDN of pyridine over Mo sulfide catalysts promoted by Rh

The effect of support (SiO₂-Al₂O₃, Al₂O₃,MgO) of the Rh-Mo(S) sulfide catalysts on the synergy in hydrodesulfurization (HDS) of thiophene and hydrodenitrogenation (HDN) of pyridine was studied. The synergy in HDS was between 7–10 regardless of the kind of support used. The synergy in HDN varied from none over the MgO supported sample to about 3 over SiO₂-Al₂O₃ supported catalyst, in accord with the positive effect of increasing support acidities. This revised version was published online in June 2006 with corrections to the Cover Date.     

Investigation of the Interactions in Complexes of Low Molecular Weight Chitosan with Ibuprofen

Complexation between ibuprofen and low molecular weight chitosan (LMWC) was studied. LMWC was prepared from high molecular weight chitosan using the acid hydrolysis method. The complexes were investigated by using DSC, FT-IR and liquid-state ¹H-NMR. Molecular mechanics (MM) calculations were used to give insight into the stoichiometry of the interaction of chitosan with ibuprofen. The results showed that complexation of ibuprofen with LMWC involves ionic interaction between the ammonium group of LMWC and the carboxylate anion of ibuprofen. It was also shown that it is more efficient to prepare the complexes using lower concentration solutions of the polymer. These results were supported by molecular mechanics calculations. The experimental results may explain the discrepancies in the literature where, in many studies, the concentration of chitosan and its low average molecular weight were not considered to be important factors in the complexation process.     

负载铂催化剂中沸石载体酸性对甲烷两步转化的影响

考察了具有相同金属分散度的Pt/NaY、Pt/HNaY、 Pt/HY、Pt/NaBeta和Pt/HBeta催化剂中沸石载体的酸性对在低温下（≤250 ℃）甲烷两步等温转化反应以及由甲烷解离吸附产生的表面碳物种分布的影响。由甲烷等温两步转化生成的C2+烃类产物的总量随着载体酸性的增加而明显增加;C2～C6产物的分布也发生了变化。由表面碳物种的程序升温加氢结果表明,在各种催化剂上碳物种的形式是相似的,其总量和具有活性的Cα物种的量均因载体酸性增加而增加,反应性也增大。这种因沸石载体酸性变化而引起的载体效应是由金属和载体的相互作用造成负载在酸性载体上铂粒子的贫电子性而引起,即由金属粒子电子性质的变化而引起的催化性质的变化。     

Support Effect in the Thermal Decomposition of Some Catalyst Precursors

The thermal decompositions of ammonium metavanadate, molybdic acid and ammonium phosphomolybdate supported on carborundum or silica were subjected to non-isothermal kinetic study. The compensation effect is discussed in connection with the quantitative estimation of the support effect. This revised version was published online in July 2006 with corrections to the Cover Date.     

Propyne and 1,3-butadiene adsorption and co-adsorption over palladium catalysts

The adsorption of propyne, 1,3-butadiene and the co-adsorption of propyne and 1,3-butadiene has been studied over a series of palladium catalysts. The adsorption of propyne shows a “secondary” adsorption region typical of hydrocarbon adsorption over supported metal catalysts. Hydrogenation occurs via the hydrogen associated with the β-palladium hydride formed during reduction. A support effect is seen with the titania support reducing the stability of the palladium hydride resulting in a lower hydrogen concentration in the titania supported hydrides. The behaviour of 1,3-butadiene is similar to that found with propyne. The catalyst with the lowest dispersion, as measured by carbon monoxide adsorption, has the highest butadiene adsorption and vice versa, whereas propyne adsorption followed the same trend as carbon monoxide. This behaviour is linked to the mode of adsorption and site requirements. Sequential adsorption revealed that the catalysts had sites that were specific to each adsorbate. Co-adsorption revealed a reduction in adsorption for both gases but with a larger reduction for 1,3-butadiene due to site requirements.     

Characterization of anthraquinone-2-carbonyl chloride as an alcohol derivatization reagent for negative ion chemical ionization mass spectrometry

Anthraquinone-2-carbonyl chloride has been utilized as a derivatization reagent for alcohols to impart electron affinity and aid in transport via a particle beam liquid chromatography-mass spectrometry (LC/MS) interface. In addition, the gas chromatographic-mass spectrometry, UV, fluorescence, and electrochemical characteristics of the derivatives were determined. A series of model compounds, 2-phenylethanol (phenethyl alcohol), 1-phenyl-2-propanol, 2-methyl-l-phenyl-2-propanol, hexanol, and methyl 2-methylglycerate, were used as analytes. The particle beam LC/MS properties of the resultant anthraquinone carboxylate esters were determined in electron impact (EI) and negative ion chemical ionization (NCI) modes. The NCI responses of these anthraquinone carboxylate esters were compared with the corresponding 3,5-dinitrobenzoate esters. The anthraquinone carboxylate esters exhibited an NCI to EI sensitivity enhancement of 113 and were detected in NCI at a tenfold lower concentration than the corresponding 3,5-dinitrobenzoate esters. A detection limit of 26 pg injected on column was achieved for phenethyl anthraquinone carboxylate in NCI by using selected ion monitoring.     

Mg-Al类水滑石负载金催化醇选择氧化中Mg/Al比例的影响

为研究Mg/Al比例对Mg-Al类水滑石(LDH)负载Au催化醇选择氧化的影响,采用共沉淀—水热晶化法合成了不同Mg/Al比的y Mg-Al LDH,采用液相还原法负载纳米Au颗粒.对样品进行XRD、N_2物理吸附、ICP-AES、AAS、TEM、CO_2-TPD、CO_2-In-situ DRIFTS和XPS等表征.在无附加碱条件下,Au/yMg-Al LDH催化剂催化1-苯乙醇选择氧化的催化活性随Mg/Al比增大呈现递增趋势,Au/4Mg-Al LDH活性最佳.载体表面弱碱性强度随Mg/Al比增大变化不大,弱碱位略有增多,对醇羟基脱氢有促进作用.载体层板Mg_3OH基团随Mg/Al比增大而增多有利于Au在层板边缘沉积,二者可形成有效协同,促进醇氧化过程进行.     

负载钨催化剂的载体效应及其表面酸性

运用BET、XRD、FT-Raman以及微量吸附量热等手段对由浸渍三种晶型氧化锆及其前体氢氧化锆制备的负载钨催化剂的结构及其表面酸性进行了研究。结果表明起始原料和制备条件对氧化锆的结构有显著影响。浸渍在氢氧化锆上的钨物种会使氢氧化锆转变为四方晶型氧化锆。但浸渍于氧化锆上的钨物种使氧化锆发生晶型转变相对较难。负载钨催化剂表面强酸位的形成与载体晶型、表面钨物种WO_x以及WO_x与载体氧化锆之间的相互作用有关。催化剂上的强酸位可因残留的Na⁺离子所毒化或阻抑。少量Y³⁺离子对表面酸性则无明显影响。     

负载Pd密偶催化剂的载体效应

采用尿素水解法或吸附沉淀法制备了金属氧化物载体,并用浸渍法负载0.5%Pd制得了Pd/Sn0.4Zr0.6O2,Pd/ZrO2,Pd/SnO2,Pd/SnO2-Al2O3和Pd/Al2O3催化剂.采用原位漫反射红外光谱、拉曼光谱、X射线光电子能谱和程序升温还原等方法对催化剂结构进行了表征,探讨了不同载体对表面PdOx物种化学吸附性质和氧化还原性能的影响,并与样品的丙烷氧化活性相关联.漫反射红外光谱表明,在Pd/SnO2-Al2O3中,Sn对Al2O3表面的Pd原子簇起到稀释作用,促进了Pd的分散,使得其CO线式吸附强度明显高于Pd/Al2O3,但Pd过高的分散度不仅减少了表面Pd-PdO活性位对的数目,而且使反应中间物种Pd-OH之间脱水困难,因而阻塞了活性位,降低了其循环氧化还原活性;而在Sn0.4Zr0.6O2复合氧化物载体中,SnO2有效地阻止了四方晶相ZrO2向稳态单斜晶相转变,且复合载体的比表面积较ZrO2和SnO2有所增加,其表面PdOx物种的分散度适中.此外,Sn0.4Zr0.6O2复合氧化物负载的Pd的价态介于Pd0与Pd2 之间,表面氧空位较多,促进了丙烷中C-H键的活化,使比表面积较低的Pd/Sn0.4Zr0.6O2具有最好的催化丙烷氧化能力,相反比表面积较高的Pd/SnO2-Al2O3活性很差,说明分散度适中且具有较低氧化态的PdOx(0相似文献   

Comparative Analysis of Conjugated Alkynyl Chromophore–Triazacyclononane Ligands for Sensitized Emission of Europium and Terbium

A series of europium and terbium complexes based on a functionalized triazacyclononane carboxylate or phosphinate macrocyclic ligand is described. The influence of the anionic group, that is, carboxylate, methylphosphinate, or phenylphosphinate, on the photophysical properties was studied and rationalized on the basis of DFT calculated structures. The nature, number, and position of electron‐donating or electron‐withdrawing aryl substituents were varied systematically within the same phenylethynyl scaffold in order to optimize the brightness of the corresponding europium complexes and investigate their two‐photon absorption properties. Finally, the europium complexes were examined in cell‐imaging applications, and selected terbium complexes were studied as potential oxygen sensors.     

Zinc(II) binding ability of tri-, tetra- and penta-peptides containing two or three histidyl residues

Macroscopic and microscopic protonation processes and zinc(II) complexes of a series of multihistidine peptides (Ac-HGH-OH, Ac-HGH-NHMe, Ac-HHGH-OH, Ac-HHGH-NHMe, Ac-HVGDH-NH(2), Ac-HHVGD-NH(2), Ac-HVHAH-NH(2), Ac-HAHVH-NH(2), Ac-HPHAH-NH(2) and Ac-HAHPH-NH(2)) were studied by potentiometric, NMR and ESI-MS spectroscopic techniques. Protonations of histidyl imidazole-N donor functions were not much affected by the number and location of histidyl residues, but the presence of C-terminal carboxylate groups had a significant impact on the basicities of the neighbouring histidyl sites. The formation of 2N(im) and 3N(im) macrochelates with the stoichiometry of [ZnL] was the major process in the complexation reactions of all peptides followed by the formation of hydroxo or amide bonded species. Thermodynamic stabilities of the zinc(II) complexes were primarily determined by the number of histidyl residues, but the presence of C-terminal carboxylate functions has also a significant contribution to metal binding. The stabilizing effect of the aspartyl beta-carboxylate group was also observed, but its extent is much weaker than that of the C-terminal carboxylate with a neighbouring histidyl residue. Zinc(II) promoted peptide amide deprotonation and co-ordination was observed only in the zinc(II)-Ac-HHVGD-NH(2) system above pH 8.     

Corrosion inhibition of steel in molar HCl by triphenyltin2–thiophene carboxylate

The effect of triphenyltin2–thiophene carboxylate (TTC) on the corrosion of steel in hydrochloric acid medium was studied using gravimetric, electrochemical polarisation and electrochemical impedance spectroscopy (EIS) measurements. The percentage inhibition efficiency was found to increase with increasing concentration of inhibitor to reach 97% at 10^?3 M. Polarisation study shows that TTC is an efficient inhibitor and acts as a mixed-type inhibitor. EIS results indicate the increase of resistance transfer (R_T) and the decrease of double layer capacitance (C_dl) with TTC concentration. Triphenyltin2–thiophene carboxylate molecules lead to the formation of a protective layer on the surface of steel. The inhibitor is adsorbed on the steel surface according to Langmuir isotherm.     

Role of copper grid mesh in the catalytic oxidation of CO over one-step synthesized Cu-Fe-Co ternary oxides thin film

The effective valuation of catalyst supports in the catalytic oxidation makes the contribution to understand the support effect of great interest. Here, the role of active substrate in the performance and stability of Cu-Fe-Co ternary oxides was studied towards the complete catalytic oxidation of CO. The Cu-Fe-Co oxide thin films were deposited on copper grid mesh (CUGM) using one-step pulsed-spray evaporation chemical vapor deposition method. Crystalline structure and morphology analyses revealed nano-crystallite sizes and dome-top-like morphology. Synergistic effects between Cu, Fe and Co, which affect the surface Cu²⁺, Fe³⁺, Co³⁺ and chemisorbed oxygen species (O²⁻ and OH⁻) of thin films over the active support and thus result in better reducibility. The thin film catalysts supported on CUGM exhibited attractive catalytic activity compared to the ternary oxides supported on inert grid mesh at a high gas hourly space velocity. Moreover, the stability in time-on-stream of the ternary oxides on CUGM was evaluated in the CO oxidation for 30 h. The adopted deposition strategy of ternary oxides on CUGM presents an excessive amount of adsorbed active oxygen species that play an important role in the complete CO oxidation. The catalysts supported on CUGM showed better catalytic conversion than that on inert grid mesh and some literature-reported noble metal oxides as well as transition metal oxides counterparts, revealing the beneficial effect of the CUGM support in the improvement of the catalytic performance.     

Anion Complexation and The Hofmeister Effect

The ¹H NMR spectroscopic analysis of the binding of the ClO₄^? anion to the hydrophobic, concave binding site of a deep‐cavity cavitand is presented. The strength of association between the host and the ClO₄^? anion is controlled by both the nature and concentration of co‐salts in a manner that follows the Hofmeister series. A model that partitions this trend into the competitive binding of the co‐salt anion to the hydrophobic pocket of the host and counterion binding to its external carboxylate groups successfully accounts for the observed changes in ClO₄^? affinity.     

Catalysis of aryl ester hydrolysis in the presence of metallomicelles containing a copper(II) diethylenetriamine derivative

The novel metallosurfactant Cu(II)-1-tetradecyldiethylenetriamine (Cu(II)TDET) was prepared, and the hydrolyses of 2-acetoxy-5-nitrobenzoic acid (1), 4-acetoxy-3-nitrobenzoic acid (2), 4-nitrophenyl acetate (3), and 2-nitrophenyl acetate (4) in the presence of micellar Cu(II)TDET were examined. The rate of ester hydrolysis for the series followed the order 1 approximately 2>3>4. The larger observed rate (kpsi) for 1 and 2 was attributed to (i) electrostatic interaction between the carboxylate anion and the cationic metallomicelle surface and (ii) the formation of a ternary complex metal:surfactant ligand:substrate (MLnS). The position of the carboxylate anion in the substrate did not significantly affect catalysis. Similar rates were observed when the carboxylate anion was ortho to the acyl ester 1 or para to the reaction center 2. The absence of a significant difference may be associated with the ternary complex coordination geometry, which unfavorably aligned the ligated substrate and the metal-bound hydroxyl. Mixed micellar solutions containing Cu(II)TDET and MTAB or Triton X-100 were examined. Added cosurfactants have a pronounced effect on the catalytic activity of Cu(II)TDET. At a low concentration of Cu(II)TDET the addition of MTAB or Triton X-100 increased the pseudo-first-order rate constant (kpsi) for the hydrolysis of 1 and 3 relative to the rate in pure Cu(II)TDET. The addition of a cosurfactant increased the total micellar volume (VM), promoting substrate incorporation within the pseudophase. At higher metallosurfactant concentration, the rate enhancement was smaller due to the dilution of the substrate within the co-micellar pseudophase.     

Zn-Co bimetallic supported ZSM-5 catalyst for phosgene-free synthesis of hexamethylene–1,6–diisocyanate by thermal decomposition of hexamethylene–1,6–dicarbamate

A set of mono-and bimetallic(Zn-Co) supported ZSM-5 catalysts was first prepared by PEG-additive method. The physicochemical properties of the catalysts were investigated by FTIR, XPS, XRD, N_2adsorption-desorption measurements, SEM, EDS and NH3-TPD techniques. The physicochemical properties showed that the Zn Co_2O_4 spinel oxide was formed on the ZSM-5 support and provided effectual synergetic effect between Zn and Co species for the bimetallic catalyst. Furthermore, bimetallic supported ZSM-5 catalyst exhibited weak, moderate and strong acidic sites, while the monometallic supported ZSM-5 catalyst showed only weak and moderate or strong acidic sites. Their catalytic performances for thermal decomposition of hexamethylene–1,6–dicarbamate(HDC) to hexamethylene–1,6–diisocyanate(HDI) were then studied. It was found that the bimetallic supported ZSM-5 catalysts,especially Zn-2Co/ZSM-5 catalyst showed excellent catalytic performance due to the good synergetic effect between Co and Zn species, which provided a suitable contribution of acidic sites. HDC conversion of 100% with HDI selectivity of 91.2% and by-products selectivity of 1.3% could be achieved within short reaction time of 2.5 h over Zn-2Co/ZSM-5 catalyst.     

New Data on the Ability of Alumina–Platinum Systems to Catalyze the Methane Aromatization Reaction under Nonoxidizing Conditions

The state and size of the metal on the surface of aluminum oxide and the acidic properties of the support depending on the concentration of supported platinum were studied in this work. The effect of the Pt content of the alumina–platinum catalyst on the activation (chemisorption) of methane was investigated, and the composition of hydrocarbon fragments formed in this case was calculated. The sample most active in a reaction of the joint conversion of methane with n-pentane, which was performed for the production of aromatic hydrocarbons under nonoxidizing conditions, was established. The effect of the temperature of n-pentane supply to the reaction atmosphere was studied for the 0.6%Pt/Al₂O₃ catalyst. The degree of enrichment of the resulting aromatic hydrocarbons and the quantity of incorporated methane activated on the catalyst surface were determined with the use of isotope mass spectrometry.     

Extraction of Uranium(VI) using D2EHPA/TOPO based supported liquid membrane

This work concerns the extraction of U(VI) using supported liquid membrane (SLM) by di-(2-ethylhexyl) phosphoric acid (D2EHPA) and tri-n-octyl phosphine oxide (TOPO) with polyvinylidene difluoride (PVDF) as a membrane support. The influence of ionic strength (S), stirring rate (V) and extraction time (t) were studied. The effect of membrane thickness on the permeability and extraction yield of uranium was investigated. A comparative study was carried out using a 2³ full factorial design between SLMs with one membrane and two membranes, and to achieve the best conditions of recovery procedure, obtaining the mutual interaction among variables and optimizing these variables. The recovery of U(VI) is almost quantitative, and the supported liquid membrane with two membranes in series is effective.