Efficient π‐conjugated interrupted host polymer by metal‐free polymerization for blue/green phosphorescent light‐emitting diodes

A new aromatic host polymer poly{[1,4‐bis(9‐decylcarbazole‐3‐yl)‐2,3,5,6‐tetrafluorobenzene‐3,3′‐diyl]‐alt‐[N‐methylisatin‐2‐one‐3,3‐diyl]} (PICzFB) containing carbazole–tetrafluorinebeneze–carbazole moiety in the π‐conjugated interrupted polymer backbone was synthesized by superacid‐catalyzed metal‐free polyhydroxyalkylation. The resulted copolymer PICzFB showed a comparatively wide band gap up to 3.32 eV and high triplet energy (E_T) of 2.73 eV due to confined conjugation by the δ? C bond interrupted polymer backbone. Blue and green light‐emitting devices with PICzFB as host, FIrpic and Ir(mppy)₃ as phosphorescent dopants showed the maximum luminous efficiencies of 5.0 and 27.6 cd/A, respectively. The results suggested that the strategy of incorporating bipolar unit into the π‐conjugated interrupted polymer backbone can be a promising approach to obtain host polymer with high triplet level for solution‐processed blue and green phosphorescent polymer light‐emitting diodes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1037–1046     

Acceptor–acceptor conjugated copolymers based on perylenediimide and benzothiadiazole for all‐polymer solar cells

Donor–acceptor (D–A) conjugated copolymers are one of known classes of organic optoelectronic materials and have been well developed. However, less attention has been paid on acceptor–acceptor (A–A) conjugated analogs. In this work, two types of A–A conjugated copolymers, namely P1‐Cn and P2‐Cn (n is the carbon number of their alkyl side chains), were designed and synthesized based on perylenediimide ( PDI ) and 2,1,3‐benzothiadiazole ( BT ). Different from P1‐Cn , P2‐Cn polymers have additional acetylene π‐spacers between PDI and BT and thus hold a more planar backbone configuration. Property studies revealed that P2‐Cn polymers possess a much red‐extended UV–vis absorption spectrum, stronger π–π interchain interactions, and one‐order larger electron mobility in their neat film state than P1‐Cn . However, all‐polymer solar cells using P1‐Cn as acceptor component and poly(3‐hexyl thiophene) or poly(2,7‐(9,9‐didodecyl‐fluoene)‐alt?5,5′‐(4,7‐dithienyl‐2‐yl‐2,1,3‐benzothiadiazole) as donor component exhibited much better performance than those based on P2‐Cn . Apart from their backbone chemical structure, the side chains were found to have little influence on the photophysical, electrochemical, and photovoltaic properties for both P1‐Cn and P2‐Cn polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1200–1215     

A comparative study of fluorine substituents for enhanced stability of flexible and ITO‐free high‐performance polymer solar cells

Two low‐band gap polymer series based on benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and dithienylbenzothiadiazole, with different numbers of fluorine substituents on the 2,3,1‐benzothiadiazole unit, have been synthesized and explored in a comparative study of the photochemical stability and operational lifetime in flexible large area roll‐coated bulk heterojunction solar cells. The two polymer series have different side chains on the BDT unit, namely 2‐hexyldecyloxy (BDT_HDO) ( P1–P3 ) or 2‐hexyldecylthiophene (BDT_THD) ( P4–P6 ). The photochemical stability clearly shows that the stability enhances along with the number of fluorine atoms incorporated on the polymer backbone. Fabrication of the polymer solar cells based on the materials was carried out in ambient atmosphere on a roll coating/printing machine employing flexible and indium‐tin‐oxide‐free plastic substrates. Solar cells based on the P4–P6 series showed the best performance, reaching efficiencies up to 3.8% for an active area of 1 cm², due to an enhanced current compared to P1–P3 . Lifetime measurements, carried out according to international summit on OPV stability (ISOS), of encapsulated devices reveals an initial fast decay for P1–P6 in the performance followed by a much slower decay rate, still retaining 40–55% of their initial performance after 250 h of testing under ISOS‐L‐1 conditions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 893–899     

A novel low‐bandgap conjugated polymer based on Ru(II) bis(acetylide) complex and BODIPY moieties

A novel conjugated polymer P‐1 incorporating Ru(II) bis(acetylide) complex and borondipyrromethene (BODIPY) moieties in the main chain was synthesized by Pd‐catalyzed Sonogashira coupling reaction of diethynyl substituted BODIPY derivative ( M‐1 ) and Ru(II) bis(acetylide) complex ( M‐2 ), and the reference polymer P‐2 was obtained from the same method as preparation of P‐1 . Compared with P‐2 , Ru(II)‐containing polymer P‐1 shows low‐bandgap as 0.87 eV from cyclic voltammetry, and obvious redshifts in both UV–vis absorption and fluorescence spectra. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1686–1692     

Chiral sensing of Eu(III)‐containing achiral polymer complex from chiral amino acids coordination induction

The β‐diketonate‐based achiral polymer P‐1 could be synthesized by the polymerization of 3,7‐dibromo‐2,8‐dimethoxy‐5,5‐dioctyl‐5H‐dibenzo[b,d]silole ( M1 ) with (Z)?1,3‐bis(4‐ethynylphenyl)?3‐hydroxyprop‐en‐1‐one ( M2 ) via typical Sonogashira coupling reaction. The β‐diketonate unit in the main chain backbone of P‐1 can further coordinate with Eu(TTA)_x [TTA^? = 4,4,4‐trifluoro‐1‐(thiophen‐2‐yl)butane‐1,3‐dionate anion, X = 1, 2, 3] to afford corresponding Eu(III)‐containing polymer complexes. The resulting achiral polymer complex P‐2 (X = 2) can exhibit strong circular dichroism (CD) response toward both N‐Boc‐l and d‐ proline enantiomers. The CD signal was preliminarily attributed to coordination induction between chiral N‐Boc‐proline and the Eu(III) complex moiety. The linear regression analysis of CD sensing shows a good agreement between the magnitude of molar ellipticity and concentration of chiral N‐Boc‐l or d‐ proline, which indicates this kind Eu(III)‐containing achiral polymer complex can be used as a chiral probe for enantioselective recognition of N‐Boc‐l or d‐ proline enantiomers based on Cotton effect of CD spectra. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3080–3086     

Conjugated polymers for the fluorescent detection of nitroaromatics: Influence of side‐chain sterics and π‐system electronics

A series of eight poly(p‐phenylene vinylene) (PPV) and poly(p‐phenylene ethynylene) (PPE) ( P1–P8 ) derivatives were tested for their ability to detect the nitroaromatic explosive 2,4,6‐trinitrotoluene (TNT) and its model compound 2,6‐dinitrotoluene (DNT). The polymers P1–P8 represent five structural classes that have not been examined for nitroaromatic sensing. These new motifs include PPE derivatives with a main‐chain m‐terphenyl unit ( P1 ) or oxacyclophane canopy‐like structure ( P2 ) and PPV derivatives with 2,6‐mesitylenephenylene repeats ( P3 and P4 ), 9,9‐dialkyl‐1,4‐fluorenylene repeats ( P5 and P6 ), or m‐phenylene units that periodically disrupt π‐conjugation along the backbone of the polymer ( P7 and P8 ). The time‐dependent photoluminescent response of films to TNT and DNT and the solution‐phase Stern‐Volmer quenching constants for both TNT and DNT were determined. The results are rationalized in terms of side‐chain sterics and π‐system electronics and are discussed relative to known conjugated polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1487–1492     

First principle studies of charge transport in PPV polymer under conformational deformation

We consider the inclusion of torsional deformations in the structure of an infinite chain of poly‐p‐phenylene vinylene and study the consequences on charge transport along the polymer length. Calculations of the electronic transport are performed with density functional theory combined with Keldysh nonequilibrium Green's function method. Deformations are modeled either as a sharp rotation of the polymer backbone about a single chemical bond or as a continuous twist extending along various monomer units. We study current‐voltage (I‐V) characteristics in a two probe configuration as a function of angle and degree of torsional sharpness and demonstrate that when the backbone torsion is abrupt a barrier to electron transport builds up that becomes maximum at an angle of 100°. The outcome of our calculations is that the abrupt twist of the polymer backbone creates two virtually disconnected segments, which validates models that treat a real polymer as distribution of chains of different sizes and conjugation lengths. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 578–586     

Hyperbranched Polyfluorinated benzyl ether polymers: Mechanism,kinetics, and optimization

Highly fluorinated, hyperbranched polymers were synthesized from the polycondensation of AB₂ monomers, 3,5‐bis[(pentafluorobenzyl)oxy]benzyl alcohol and 3,5‐bis[(pentafluorobenzyl)‐oxy]phenol with potassium carbonate base, and 18‐crown‐6 phase transfer agent in a variety of polar aprotic solvents. The regioselectivity of the polymerization was optimized and was found to be temperature dependent. The new polymerization technique produced higher molecular weight polymer using safer conditions than earlier methods. The resulting optimization was used to control substitution of oxygen‐bearing nucleophiles along nonactivated fluoroaryl systems in high yield. Water was found to induce side reactions that generate a highly conjugated fluoroaryl phenol with lowered reactivity. The removal of a methylene spacer in the polymer backbone of the hyperbranched polymer produced a polymer with greater thermal stability. The reaction conditions for polymerization were found to be general for nucleophile‐bearing perfluorinated systems. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 985–994     

Synthesis and self‐assembly of polyhydroxylated and electropolymerizable block copolymers

A facile synthetic strategy for preparing hydroxylated polymethacrylate amphiphilic block copolymers (PCzMMA‐b‐PBMMA, PFlMMA‐b‐PBMMA) incorporated with primary and secondary hydroxyl groups and electroactive moieties along the polymer backbone is reported. Full characterization, structure‐property relationship and self‐assembly of these polymers are discussed. Due to interplay of hydrophobic/hydrophilic interactions, PCzMMA‐b‐PBMMA formed a layered lattice and PFlMMA‐b‐PBMMA showed a vesicular morphology. Electropolymerization of the electroactive units led to the formation of cross‐conjugated polymer network in solution and in thin films. The network structure was characterized with a range of spectroscopic techniques. Such highly processable polymers may be of interest to applications in which a conducting amphiphilic films with strong adhesion to various substrates are required. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2217–2227     

Intramolecular donor–acceptor copolymers containing side‐chain‐tethered perylenebis(dicarboximide) moieties for panchromatic solar cells

A series of side‐chain‐tethered copolymers containing the N‐(2‐ethylhexyl)‐N′‐(thiophene‐3‐yl)‐3,4:9,10‐perylenebis(dicarboximide) (thiophene‐PDI) moieties and 4,4‐diethylhexyl‐cyclopenta[2,1‐b:3,4‐b′]dithiophene unit were synthesized via Grignard metathesis polymerizations. With the incorporation of pendent perylenebis(dicarboximide) (PDI) moieties as acceptor side chains and thiophene as the donor backbone, the copolymers exhibited the intramolecular donor–acceptor characteristic and displayed a panchromatic absorption ranging from 290 to 1100 nm and ideal bandgaps of 1.49 to 1.52 eV. Due to the coplanarity of PDI moieties, the charge separation and transfer process were more effective and enhanced after photoexcitation. When increased the weight ratio of PC₆₁BM:polymer to 3, the J_sc could be raised significantly. The value of bandgap decreased slightly, and both V_oc and J_sc showed an upward trend with the increase of molar ratio of thiophene‐PDI unit from 50% (the copolymer P11) to 75% (the copolymer P13). The polymer/PC₆₁BM devices have shown a significant improvement from 0.45 to 1.66% with a judicious modulation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1978–1988     

Quinoxaline‐based D‐A conjugated polymers for organic solar cells: Probing the effect of quinoxaline side chains and fluorine substitution on the power conversion efficiency

We describe the successful synthesis of four novel donor‐acceptor (D‐A) type copolymers, referred to as PQxBT , PQxFBT , TQxBT , and TQxFBT . The effects of using a fluorinated bithiophene (FBT) and varying the side‐chain moieties tethered to the quinoxaline (Qx) unit (electron‐withdrawing group in the polymer backbone) on the physical properties and photovoltaic performance were investigated. Specifically, the four polymers were synthesized using either alkoxyphenyl (P) or alkylthiophene (T) units anchored to the quinoxaline in the polymer backbone. The FBT‐bearing polymers, PQxFBT and TQxFBT , displayed more redshifted absorption spectra and higher crystallinity owing to the greater planarity of their polymer backbone as compared to the non‐fluorinated polymers. The TQxFBT copolymer, equipped with both the alkylthiophene side chains and FBT, exhibited face‐on orientation in film state and a well‐mixed nanophase morphology in TQxFBT :PC₇₁BM blend films. The photovoltaic device fabricated from TQxFBT :PC₇₁BM exhibited the highest power conversion efficiency of 4.18%. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1209–1218     

Synthesis and characterization of an ionic conjugated polymer: Poly[2‐ethynyl‐N‐(2‐thiophenecarbonyl) pyridinium chloride]

The activated polymerization of 2‐ethynylpyridine by using 2‐thiophenecarbonyl chloride yielded the corresponding conjugated ionic polymer, poly[2‐ethynyl‐N‐(2‐thiophenecarbonyl)pyridinium chloride] (PETCPC). The polymerization proceeded well to give high yield of polymer without any additional initiator or catalyst. The instrumental analysis data on polymer structure indicated that the present ionic polymer have a conjugated polymer backbone system having N‐(2‐thiophenecarbonyl)pyridinium chloride as substituents. The photoluminescence maximum peak of PETCPC was located at 573 nm, which corresponds to the photon energy of 2.16 eV. The aromatic functional substituents in the conjugated backbone system shift PL maximum values because it makes different molecule arrangement. The cyclovoltamograms of PETCPC exhibited the electrochemically stable window at ?1.24 to 1.80 V region. It was found that the kinetics of the redox process of polymer might be controlled by the reactant diffusion process from the experiment of the oxidation current density of polymer versus the scan rate. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6153–6162, 2009     

A wide band gap polymer derived from 3,6‐carbazole and tetraphenylsilane as host for green and blue phosphorescent complexes

We have synthesized a novel wide band gap polymer P36HCTPSi derived from 3,6‐carbazole and tetraphenylsilane by palladium‐catalyzed Suzuki coupling reaction. The resultant polymer shows a high glass transition temperature (217 °C) and good thermal stability. The conjugation length of P36HCTPSi is effectively confined because of the δ‐Si interrupted polymer backbone. The polymer exhibits a violet emission with a peak at 392 nm in solution, and the band gap estimated from the onset of its absorption is 3.26 eV. The high energy emission and wide band gap of P36HCTPSi make it appropriate host for green and blue emission phosphorescent materials. Efficient energy transfers from P36HCTPSi to both fac‐tris[2‐(2‐pyridyl‐kN)‐5‐methylphenyl]iridium(III) (green emission) and bis[(4,6‐difluorophenyl)pyridinato‐N,C²]‐(picolinato)iridium(III) (blue emission) were observed in photoluminescence (PL) spectra. Highly efficient phosphorescent polymer light‐emitting devices were realized by using P36HCTPSi as the host for iridium complexes, the maximum luminous efficiencies for green and blue devices were 27.6 and 3.4 cd/A, respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4784–4792, 2009     

Design and synthesis of dithieno[3,2‐b:2′3′‐d]pyrrole‐based conjugated polymers for photovoltaic applications: consensus between low bandgap and low HOMO energy level

A strategy of the fine‐tuning of the degree of intrachain charge transfer and aromaticity of polymer backbone was adopted to design and synthesize new polymers applicable in photovoltaics. Three conjugated polymers P1 , P2 , and P3 were synthesized by alternating the electron‐donating dithieno[3,2‐b:2′3′‐d]pyrrole (D) and three different electron‐accepting (A) segments ( P1 : N‐(2‐ethylhexyl)phthalimide; P2 : 1,4‐diketo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole; and P3 : thiophene‐3‐hexyl formate) in the polymer main chain. Among the three polymers, P2 possessed the broadest absorption band ranging from 300 to 760 nm, the lowest bandgap (1.63 eV), and enough low HOMO energy level (?5.27 eV) because of the strong intrachain charge transfer from D to A units and the appropriate extent of quinoid state in the main chain of P2 , which was convinced by the theoretical simulation of molecular geometry and front orbits. Photovoltaic study of solar cells based on the blends of P1 – P3 and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) demonstrated that P2 :PCBM exhibited the best performance: a power conversion efficiency of 1.22% with a high open‐circuit voltage (V_OC) of 0.70 V and a large short‐circuit current (I_SC) of 5.02 mA/cm² were achieved. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of N‐methyl amide linkage on hydrogen bonding behavior and water transport properties of partially N‐methylated random aromatic copolyamides

The synthesis, conformational preferences, hydrogen bonding behaviors, and membrane properties of new partially N‐methylated random aromatic copolyamides were reported. These copolyamides were prepared by the low temperature polycondensations of isophthaloyl chloride with 3,5‐diaminobenzoic acid, N,N'‐dimethyl‐4,4'‐diaminodiphenyl ether (MDAE), and 4,4'‐diaminodiphenyl ether. The incorporation of the N‐methyl amide linkages into the polymer backbone decreased the contents of the cis conformation in the N‐methyl amide linkages and suppressed the hydrogen bondings among the amide linkages. Furthermore, the surface hydrophilicity of the copolyamides evaluated by water contact angle measurements decreased with increasing the MDAE unit in the polymer backbone. These experimental results indicated that the suppression of the hydrogen bonding and the existence of the tertiary amide linkage in the cis conformation induced the loose packing of the polymer chains. As a result, the incorporation of the N‐methyl amide linkage increased water flux and decreased salt rejection. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3453–3462     

A reduction sensitive cascade biodegradable linear polymer

Cascade degradable linear polymers offer the potential for a high degree of control over the degradation process. They comprise a backbone that is stable in the presence of an end cap, but upon removal of the end cap a cascade of intramolecular reactions is initiated that leads of depolymerization of the polymer backbone. Reported here is a new polymer backbone based on N,N′‐dimethylethylenediamine and 2‐mercaptoethanol linked by carbamates and thiocarbamates. A disulfide end cap was incorporated such that its cleavage under reducing conditions revealed the thiol of 2‐mercaptoethanol, leading to alternating cyclizations of the 2‐mercaptoethanol and N,N′‐dimethylethylenediamine moieties to provide 1,3‐oxathiolan‐2‐one and N,N′‐dimethylimidazolidinone, respectively. The degradation was monitored by ¹H NMR and GPC. The expected products were observed, along with a portion of nondegradable polymer that was likely cyclic species. Overall, the results demonstrate the promise of this new class of polymers to degrade selectively in reducing environments such as hypoxic tumor tissue or the intracellular compartments of cells. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3977–3985, 2010     

Thiophene π bridge effect on bulky side‐chained benzodithiophene‐based photovoltaic polymers

Recently, we have used terthiophene side chain to modify benzo[1,2‐b:4,5‐b′]dithiophene (BDT) to form novel building block for BDT polymers. In this paper, this building block is used to copolymerized with thieno[3,4‐c]pyrrole‐4,6‐dione (TPD) and thieno[3,4‐b]thiophene (TT). This building block and TPD‐ or TT‐based polymers (P1 and P3) show high open circuit voltage (V_OC) (ca. 0.9–0.95 V) and low energy loss (E_g–eV_OC) in solar cells devices compared with similar polymers without bulky side chain. We further introduce thiophene π bridge into these polymers backbone to form two other polymers (P2 and P4). We find this thiophene π bridge does contribute to this bulky side chained benzodithiophene polymer photovoltaic performances, especially for power conversion efficiencies (PCEs). The polymer solar cells (PSCs) performances are moderate in this article due to the serious aggregation in the PSCs active layer. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1615–1622     

Synthesis and FET characterization of novel ambipolar and low‐bandgap naphthalene‐diimide‐based semiconducting polymers

A novel series of naphthalene‐diimide‐based semiconducting polymers ( P1–P4 ) containing benzodithiophene or dithienopyrrole were successfully synthesized for ambipolar semiconducting materials showing near infrared absorptions. The incorporation of a 3‐hexylthiophene (3HT) spacer extended the intramolecular charge‐transfer (ICT) peak from λ_onset = 739 nm ( P1 ) to 785 nm ( P3 ). Moreover, about 250 nm red‐shift of the ICT peaks was observed in P2 and P4 compared to P1 and P3 due to the increased high‐lying HOMO energy levels. The grazing incidence X‐ray scattering of the P3 and P4 films proved the slightly improved crystalline order in the π?π stacking direction, indicating that the planar backbone is probably due to the introduced 3HT. The P1–P4 ‐based field‐effect transistor showed n‐type dominant ambipolar characteristics. The P2 and P4 showed higher electron mobilities up to 1.5 × 10^?2 cm² V^?1 s^?1 than P1 and P3 , which might be influenced by the orientation of the polymer backbone and the intermolecular orbital overlap. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 359–367     

Aza‐Michael addition reaction: Post‐polymerization modification and preparation of PEI/PEG‐based polyester hydrogels from enzymatically synthesized reactive polymers

The utility of aza‐Michael addition chemistry for post‐polymerization functionalization of enzymatically prepared polyesters is established. For this, itaconate ester and oligoethylene glycol are selected as monomers. A Candida Antarctica lipase B catalyzed polycondensation reaction between the two monomers provides the polyesters, which carry an activated carbon‐carbon double bond in the polymer backbone. These electron deficient alkenes represent suitable aza‐Michael acceptors and can be engaged in a nucleophilic addition reaction with small molecular mono‐amines (aza‐Michael donors) to yield functionalized linear polyesters. Employing a poly‐amine as the aza‐Michael donor, on the other hand, results in the formation of hydrophilic polymer networks. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 745–749     

From single‐chain folding to polymer nanoparticles via intramolecular quadruple hydrogen‐bonding interaction

Single‐chain folding via intramolecular noncovalent interaction is regarded as a facile mimicry of biomacromolecules. Single‐chain folding and intramolecular crosslinking is also an effective method to prepare polymer nanoparticles. In this study, poly(methyl methacrylate‐co?2‐ureido‐5‐deazapterines functionalized ethylene methacrylate) (P(MMA‐co‐EMA‐DeAP)) is synthesized via free radical polymerization. The single‐chain folding of P(MMA‐co‐EMA‐DeAP) and the formation of the nanoparticles in diluted solution (concentration <0.005 mg/mL) are achieved via supramolecular interaction and intramolecular collapsing during the disruption‐reformation process of the hydrogen bonding triggered by water. The size and the morphology of the nanoparticles are characterized by dynamic light scattering, transmission electron microscope, and atomic force microscope. The results show that the size of the nanoparticles depends on the molecular weight of the polymer and the loading of 2‐ureido‐5‐deazapterines functionalized ethylene methacrylate (EMA‐DeAP) on the polymer backbone. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1832–1840