贮箱漏率正压检测方法

氦质谱检漏技术是目前国内外应用较多的一种先进的检漏技术。"贮箱漏率正压检测方法"是为适应航天贮箱结构复杂、漏率要求严格等特点而开发的一种氦质谱检漏方法。被检容器充正压,外部集气容器保持常压或抽成真空,实现正压差累积法检漏和压力真空检漏,消除了人为及环境因素影响,具有检测效率高、结果精确、安全可靠等优点。经测算该检测方法较传统方法可降低成本30%。     

基于应变式压力传感器的高精度网络化称重系统研究

H30A型国产应变电阻式压力传感器的高精度网络化叉车称重系统由四部分组成:即压力传感器、微弱信号检测模块、人机交互模块以及无线通信模块。其量程为1吨,综合精度达到0.02%,处于国际先进水平。此外,该称重系统具有网络化通信功能,实现了一对一,一对多,多对多的网络化通信功能。为工业柔性生产,智能化管理,提供了强有力的技术支持,为迎接物联网时代的到来提供了可能的技术基础。     

霍尔效应在直流电压隔离传送中的应用

应用基于霍尔效应的磁平衡原理设计了直流电压高精度隔离传送传感器,并与光耦传感器进行了比较,结果表明:在温度变化的环境中,该传感器隔离传送直流电压的精度优于光耦传感器28倍.     

光纤应变、温度、振动同时测量新技术的研究

本文介绍了集成式Bragg光纤光栅(FBG)和非本征型Fabry-Perot干涉腔(EFPI)复合传感器的结构及应用该传感器同时测量静态应变、温度和振动的原理.利用FBG、EFPI和低相干性干涉信号解调方法实现了用一个传感器同时测量三个参量.实验结果表明温度精度达±1℃,应变精度为±20με,振幅分辨率达1nm,测量重复性好.     

光纤应变、温度、振动同时测量新技术的研究

本文介绍了集成式 Bragg光纤光栅 ( FBG)和非本征型 Fabry-Perot干涉腔 ( EFPI)复合传感器的结构及应用该传感器同时测量静态应变、温度和振动的原理 .利用 FBG、EFPI和低相干性干涉信号解调方法实现了用一个传感器同时测量三个参量 .实验结果表明温度精度达± 1℃ ,应变精度为± 2 0 με,振幅分辨率达 1 nm,测量重复性好     

活塞式菱形结构光纤布喇格光栅渗压传感器

为了适应矿井、大坝对渗压监测的需要,提出一种活塞和菱形传压结构相结合的光纤布喇格光栅渗压传感器,活塞把测试压力传递到菱形传压结构,菱形传压结构拉动其上下对称连接的弹性钢片,导致粘贴在弹性钢片上的光纤布喇格光栅中心波长产生变化.利用有限元方法在500kPa的测试环境中对顶角分别为90°、110°、130°、150°情况下菱形传压结构的应力特性进行分析,根据仿真参量研制了渗压传感器,并对该传感器进行了压力标定试验和温度补偿试验.实验结果表明:传感器对渗压的灵敏度为2.04nm/MPa,拟合度为0.997,重复性为0.9%,两个测压光栅温度灵敏度分别为0.023 33nm/℃、0.021 68nm/℃,温补光栅为0.009 916nm/℃.     

基于TEC的小型快速高精度恒温系统设计

为研究半导体器件的瞬态热学特性,研制了基于半导体加热制冷片(TEC)的小型快速高精度恒温系统;论述了基于STM32F103RBT6的加热制冷恒温系统设计,系统以微控制器STM32F103RBT6,恒温驱动电路,TEC和温度采集电路为硬件,用数字PID(proportion integration differentiation)算法实时调整输出脉宽调制信号PWM(pulse-width modulation),直到温度在预设精度范围内,从而实现恒温控制;系统采用H桥电路实现快速加热制冷,恒温驱动电路采用无源滤波器和有源滤波器构成的混合滤波器大大降低了电流纹波,提高了系统控温精度;实验结果表明,恒温系统工作稳定可靠,控制精度高,可快速加热制冷,在微小型恒温系统研制方面有一定的实用和推广价值。     

半导体激光器温度控制的研究

本文研究了半导体激光器的温度特性；提出了半导体激光器的高精度温度控制方法和保证温度信号检测、传输精度的方法；研制了半导体致冷的半导体激光器温度控制系统．     

基于DSP的光纤光栅应变传感器信号检测实验研究

针对光纤光栅应变传感器接收信号弱且信噪比低这一问题,提出了应用DSP技术来抑制噪声,提高Bragg峰值波长检测精度的方法.实验结果表明所设计的498阶Kaiser窗低通FIR数字滤波器能够显著提高光纤光栅应变传感器的信号检测精度.采用DSP技术可以较好地解决光纤光栅传感器的波长解调这一技术难题.     

Honeywell PPT压力传感器测控程序设计

针对Honeywell PPT压力传感器模拟输出方式需要数据采集设备才能实现与计算机通信,以及其数字输出精度高于模拟输出精度的情况,为了方便快速地实现PPT的工程应用,利用传感器串口通信特性,基于C[HT6"]++ Builder编程,设计了简单实用的测控程序;可通过数字的方式完成对压力传感器信号的测量及常用参数的更改,并能图形化显示传感器的实时测量,通过高精度标准压力输出设备测试,该程序响应速度快,测试结果准确,可完全在个人电脑上操作,成本低廉,易于实现。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.