Comparative studies of various run buffers for chiral capillary electrophoresis using chiral crown ether as a chiral selector

In the capillary electrophoretic separation of primary amine enantiomers using (+)-(18-crown-6)-tetracarboxylic acid (18C6H4) as a chiral selector, the presence of run buffer constituents such as tris(hydroxymethyl)aminomethane (Tris) or Na+ competing with analytes for 18C6H4, diminishes the effectiveness of 18C6H4. In order to determine appropriate buffer systems for 18C6H4, various run buffer cationic components including Tris, 1,3-bis[tris(hydroxymethyl)methylamino]propane, bis(2-hydroxyethyl)iminotris(hydroxymethyl)methane, triethanolamine, tetramethylammonium, and Na+ were compared. Quantitative studies of the effects of the competitive constituents were carried out by measuring the electrophoretic mobilities of histidine as a function of the 18C6H4 concentration. We also derived a simple equation to estimate the optimal chiral selector concentration for a maximum mobility difference in the presence of a competitive inhibitor.     

Chiral counter-current chromatography of gemifloxacin guided by capillary electrophoresis using (+)-(18-crown-6)-tetracarboxylic acid as a chiral selector

(+)-(18-crown-6)-tetracarboxylic acid (18C6H4) has been known as a highly efficient chiral selector for resolving primary amine enantiomers in capillary electrophoresis (CE). We investigated the chiral separation of gemifloxacin using 18C6H4 in analytical counter-current chromatography (CCC). The separation conditions for CE, including the binding constant, pH, and run buffer constituents, provided a helpful guideline for chiral CCC. A successful separation of gemifloxacin enantiomers could be achieved using a two-phase solvent system composed of 1-butanol-ethyl-acetate-bis(2-hydroxyethyl)aminotris(hydroxymethyl)methane acetate buffer with a small amount of 18C6H4. The hydrophobicity of the solvent system and the 18C6H4 concentration were varied to optimize the chiral separation.     

Chiral separation of gemifloxacin in sodium-containing media using chiral crown ether as a chiral selector by capillary and microchip electrophoresis

Chiral crown ether, (+)-(18-crown-6)-tetracarboxylic acid (18C6H(4)), is an effective chiral selector for resolving enantiomeric primary amines owing to the difference in affinities between 18C6H(4) and each of the amine enantiomers. In addition to the destacking effect of sodium ion in the sample solution, the strong affinity of sodium ion to the polyether ring of crown ether is unfavorable to chiral capillary electrophoresis using 18C6H(4) as a chiral selector. In this report, the chiral separation of gemifloxacin dissolved in a saline sample matrix using 18C6H(4) was investigated. Adding a chelating agent, ethylenediaminetetraacetic acid (EDTA), to the run buffer greatly improved the separation efficiencies and peak shapes. The successful chiral separation of gemifloxacin in a urinary solution was demonstrated for both capillary and microchip electrophoresis.     

Structural scaffold of 18-crown-6 tetracarboxylic acid for optical resolution of chiral amino acid: X-ray crystal analyses and energy calculations of complexes of D- and L-isomers of tyrosine, isoleucine, methionine and phenylglycine

To clarify the structural scaffold of (+)-18-crown-6 tetracarboxylic acid ((+)-18C6H4) for the optical resolution of a chiral amino acid, the crystal structures of its equimolar complexes with L- and D-isomers of tyrosine (Tyr), isoleucine (Ile), methionine (Met) and phenylglycine (PheG) were analysed by X-ray diffraction methods. (+)-18C6H4 took very similar conformations for all complexes. Although the chemical structure of (+)-18C6H4 is C2-symmetric, it took a similar asymmetric ring conformation of radius ca. 6.0 A. In all complexes, the amino group of chiral amino acids was located near the center of the ring and formed three hydrogen bonds and five electrostatic interactions with eight oxygen atoms of the ether ring and carboxyl groups. Also, the Calpha atom of chiral amino acids participated in Calpha-H...O interaction with the oxygen atom of (+)-18C6H4. In contrast, the carboxyl group of chiral amino acids did not directly interact with (+)-18C6H4. These results indicate that the structural scaffold of (+)-18C6H4 for the optical resolution of chiral amino acids is mainly based on the mode of interaction of (+)-18C6H4 with the amino and Calpha-H groups of chiral amino acids. The differences in interaction pattern and binding energy between the L- and D-isomers of each amino acid are discussed in relation to the chiral recognition of (+)-18C6H4.     

Separation of enantiomers by capillary electrophoresis-mass spectrometry employing a partial filling technique with a chiral crown ether

Enantiomer separations were performed by capillary electrophoresis-mass spectrometry (CE-MS) with (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid (18C6H4) as a chiral selector. In order to prevent the introduction of the nonvolatile chiral, selector, 18C6H4, into the nozzle of the CE-MS interface and/or the orifice plate, a partial filling technique was employed in this study. By the partial filling technique, the contamination caused by the nonvolatile chiral selector was avoided not only during the analysis but also during the washing of capillary with the separation solution prior to the run. Several racemic compounds having a primary amino group were successfully separated. Racemic 3-aminopyrrolidine and racemic alpha-amino-epsilon-caprolactam have no strong UV absorption, but such compounds were detected with a high sensitivity by MS detection. In this paper, the effects of the length of separation zone and those of the 18C6H4 concentration were described. As the length of the separation zone was longer or as the concentration of 18C6H4 was higher, the enantiomer resolution was enhanced more and more. However, the optimization of 18C6H4 concentration was practically enough to obtain the baseline separation.     

6-O-(2-hydroxybutyl)-β-CD as a chiral selector for nonaqueous capillary electrophoretic separation of chiral drugs

6-O-(2-hydroxybutyl)-β-CD, as a new β-cyclodextrin (β-CD) derivative, was successfully synthesized. It was used as a chiral selector to separate six chiral drugs, including propranolol, anisodamine, promethazine, ketoconazole, benzhexol, and fenfluramine in nonaqueous capillary electrophoresis (NACE). The effects of the organic solvent, the electrolytes, the concentrations of cyclodextrin derivatives, and the pH of the buffer on the chiral resolution (Rs) were investigated. The baseline separation of enantiomers, including propranolol (Rs = 2.26), anisodamine (Rs = 2.31), promethazine (Rs = 2.42), ketoconazole (Rs = 2.56), benzhexol (Rs = 3.38), and fenfluramine (Rs = 3.04), could be achieved using a buffer of 100 mmol · L^t−1 citric acid and 50 mmol · L^t−1 Tris (hydroxymethyl) aminomethane (Tris) at pH 4.6 containing 100 mmol · L^t−1 6-O-(2-hydroxybutyl)-β-CD in formamide (FA).     

Resorcinarene-based cavitands with chiral amino acid substituents for chiral amine recognition

Resorcinarene-based deep cavitands alanine methyl resorcinarene acid (), alanine undecyl resorcinarene acid () and glycine undecyl resorcinarene acid (), which contain chiral amino acids, have been synthesized. The upper rim of the resorcinarene host is elongated with four identical substituents topped with alanine and glycine groups. The structures of the new resorcinarenes were elucidated by nuclear magnetic resonance (NMR), mass spectrometry (MS) and the sustained off-resonance irradiation collision induced dissociation (SORI-CID) technique in FTICR-MS. These studies revealed that eight water molecules associate to the cavitand, two for each alanine group. The alanine substituent groups are proposed to form a kite-like structure around the resorcinarene scaffold. The binding of , , and with chiral R- and S-methyl benzyl amines was studied by (1)H NMR titration, and compared to that of a binary l-tartaric acid and the monoacid phthalyl alanine (). The results show that these compounds interact with amine guests; however, with four carboxylic acid groups, they bind several amine molecules strongly while the binary l-tartaric acid only binds one amine guest strongly. The simple compound , which contains one carboxylic group, shows weak binding to the amines. The (1)H NMR titration of with primary, secondary, and tertiary chiral amines showed that it can discriminate between these three types of amines and showed chiral discrimination for chiral secondary amines.     

Stereoisomeric separation of pharmaceutical compounds using CE with a chiral crown ether

Optical pure (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid, a chiral crown ether, was successfully used as a chiral selector for the stereoisomeric separation of numerous real pharmaceutical compounds. Both practical and mechanistic aspects were described. Effects of chiral selector concentration under different pH values of BGE were discussed. Chiral recognition for the enantiomeric compounds with (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was investigated through model compounds using CE and infrared spectroscopic techniques. Relations between the enantioselectivity of the chiral crown ether and the structural features of the studied compounds were also investigated. Unusual resolutions of compound-p and its enantiomer as well as compound-o and its 2b epimer were described. These compounds contained only tertiary amine, believed to be nonbinding with crown ethers in general. The possible mechanisms for the interaction between compound-o and the chiral crown ether were investigated using CE, electrospray MS (ESI-MS), and proton ((1)H) NMR spectroscopy. All experiments provided clear evidence that binding between compound-o and the chiral crown ether had occurred. ESI-MS spectra indicated that the complexes had a 1:1 stoichiometric ratio. The advantages and disadvantages of using chiral crown ether for stereoisomeric separations were compared with those using sulfated CDs.     

Computational modeling of capillary electrophoretic behavior of primary amines using dual system of 18-crown-6 and β-cyclodextrin

Using capillary electrophoresis (CE) three chiral primary amine compounds 1-aminoindan (AI), 1-(1-naphthyl)ethylamine (NEA) and 1,2,3,4-tetrahydro-1-naphthylamine (THAN), exhibited only partial or no separation when β-cyclodextrin (βCD) was used as chiral selector. The use of 18-crown-6 (18C6) as a second additive with βCD resulted in an enhanced separation. A molecular modeling study, using molecular mechanics and the semiempirical PM6 calculations, was used to help explaining the mechanism of the enantiodifferentiation and to predict the separation process. Optimization of the structures of the complexes by the PM6 method indicate that the poor separation obtained in the presence of the βCD chiral selector alone is due to the small binding energy differences (ΔΔE) of 4.7, 1.1 and 1.2 kcal mol(-1) for AI, NEA and THAN, respectively. In the presence of 18C6 it was suggested that a sandwich compound between 18C6, amine and βCD is formed. Theoretical calculations show that a significant increase in the binding energy is obtained for the sandwich compounds indicating strong hydrophobic and van der Waals interactions that show enhanced enantiodifferentiation.     

Separation of enantiomers in capillary electrophoresis with contactless conductivity detection

Contactless conductivity detection is successfully demonstrated for the enantiomeric separation of basic drugs and amino acids in capillary electrophoresis (CE). Derivatization of the compounds or the addition of a visualization agent as for indirect optical detection schemes were not needed. Non-charged chiral selectors were employed, hydroxypropylated cyclodextrin (CD) for the more lipophilic basic drugs and 18-crown-6-tetracarboxylic acid (18C6H4) for the amino acids. Acidic buffer solutions based on lactic or citric acid were used. The detection limits were determined as 0.3 microM for pseudoephedrine as an example of a basic drug and were in the range from 2.5 to 20 microM for the amino acids.     

Comparison of highly sulfated alpha-, beta-, and gamma-cyclodextrins and 18-crown-6-tetracarboxylic acid for the enantiomeric separation of some amino acids and derivatives by capillary electrophoresis.

18-Crown-6-tetracarboxylic acid (18C6H4) and highly sulfated cyclodextrins (HS-alpha-, beta-, gamma-CDs) are highly selective chiral selectors for the enantioseparation of solutes bearing the primary amino function. Excellent resolutions were obtained for all solutes on HS-gamma-CD and on 18C6H4. The former, however, is by far the best chiral selector for the solutes studied in this work because the highest resolution is obtained with the shortest migration times. The reversal of the D- and L-migration order on HS-CDs compared to 18C6H4 is an interesting feature for the determination of enantiomeric excess.     

Interaction between 18-crown-6-tetracarboxylic acid and positional substituents of enantiomers and simultaneous separation of positional enantiomers of methyl-DL-tryptophans by capillary electrophoresis

18-Crown-6-tetracarboxylic acid (18C6H4) is a chiral selector with high selectivity for the enantioseparation of solutes bearing the primary amine function. This work presents the simultaneous separation of positional enantiomers of methyl-DL-tryptophans by using 18C6H4 as an additive to the background electrolyte. Separation conditions such as pH, the concentration of 18C6H4, and the applied voltages have critical inference on the simultaneous separation. The addition of cyclodextrins as anionic surfactants to the background electrolyte did not improve the separation. The selector-selectand interactions between 18C6H4 and the positional enantiomers have been investigated. It was observed that both the position and type of substituents contribute to the enantioselectivity. The migration order and resolution depended on the distance from the substituents to the asymmetric carbon of the enantiomers.     

Structural scaffold of 18-crown-6 tetracarboxylic Acid for optical resolution of chiral amino acid: x-ray crystal analyses of complexes of D- and L-isomers of serine and glutamic acid

(+)-18-crown-6 tetracarboxylic acid (18C6H4) has been used as a chiral selector for D/L-amino acids in HPLC, where L-isomer is usually eluted prior to D-isomer, except for the case of serine. To clarify why serine exhibits the reverse order for the elusion, the chiral interactions of D- and L-serines with (+)-18C6H4 were investigated by the X-ray single crystal analyses, together with the case of D- and L-glutamic acids, which exhibit the usual elution order in HPLC. The backbone structures (amino, Calpha-H and carboxyl groups) of these four amino acids showed the nearly same interaction with (+)-18C6H4 despite their different chirality. In contrast, the hydroxyl group of L-serine side chain formed a hydrogen bond with the carboxyl group of (+)-18C6H4, whereas such a interaction was not formed for the side chain of D-serine and D- and L-glutamic acids. Thus, it was shown that the exception of D/L-serine from the first elution rule of L-isomer in HPLC is due to the presence and absence of a hydrogen bond formation of its side chain OH group.     

Enantiomeric separation of 1-phenylethylamine and 1-cyclohexylethylamine in capillary electrophoresis with contactless conductivity detection

Contactless conductivity detection was employed for the detection of the enantiomers of 1-phenylethylamine and 1-cyclohexylethylamine which were separated in capillary electrophoresis with unprecedented high resolutions R(s) of 2.3 and 3.3, respectively, by using a combination of dimethyl-beta-cyclodextrin and the chiral crown ether 18C6H4 as chiral selectors in a citric acid buffer of pH 2.4. The conductivity measurement enabled the direct detection, i.e. without having to derivatize or resort to indirect methods, of all species including the non-UV-absorbing enantiomers of cyclohexylamine. Detection limits of 0.5 microM were achieved and the determination of enantiomeric ratios of up to 99:1 was found possible.     

Phospholipid-lysozyme coating for chiral separation in capillary electrophoresis

A phospholipid coating with lysozyme as chiral recognition reagent permeated into the phospholipid membrane was developed for the chiral capillary electrophoretic (CE) separation of D- and L-tryptophan. As a kind of carriers, coated as phospholipid membranes onto the inner wall of a fused-silica capillary, liposomes are able to interact with basic proteins such as lysozyme, which may reside on the surface of the phospholipid membrane or permeate into the middle of the membrane. The interaction results in strong immobilization of lysozyme in the capillary. Coatings prepared with liposomes alone did not allow stable immobilization of lysozyme into the phospholipid membranes, as seen from the poor repeatability of the chiral separation. When 1-(4-iodobutyl)-1,4-dimethylpiperazin-1-ium iodide (M1C4) was applied as a first coating layer in the capillary, the electroosmotic flow (EOF) was effectively suppressed, the phospholipid coating was stabilized, and the lysozyme immobilization was much improved. The liposome composition, the running buffer, and the capillary inner diameter all affected the chiral separation of D- and L-tryptophan. Coating with 4 mM M1C4 and then 1 mM phosphatidylcholine (PC)/phosphatidylserine (PS) (80:20 mol%), with 20 mM (ionic strength) Tris at pH 7.4 as the running buffer, resulted in optimal chiral separation with good separation efficiency and resolution. Since lysozyme was strongly permeated into the membrane of the phospholipids on the capillary surface, the chiral separation of D- and L-tryptophan was achieved without lysozyme in the running buffer. The effects of different coating procedures and separation conditions on separation were evaluated, and the M1C4-liposome and liposome-lysozyme interactions were elucidated. The usefulness of protein immobilized into phospholipid membranes as a chiral selector in CE is demonstrated for the first time.     

Synthesis and characterization of some new C2 symmetric chiral bisamide ligands derived from chiral Feist's acid

The hemilabile chiral C2 symmetrical bidentate substituted amide ligands (1R,2R)-5(a-d) and (1S,2S)-6(a-d) were synthesized in quantitative yield from (1R,2R)-(+)-3-methylenecyclo-propane-1,2-dicarboxylic acid (1R,2R)-3 and (1S,2S)-(-)-3-methylene-cyclopropane-1,2-dicarboxylic acid (1S,2S)-3, in two steps, respectively. The chiral Feist's acids (1R,2R)-3 and (1S,2S)-3 were obtained in good isomeric purity by resolution of trans-(±)-3-methylene-cyclopropane-1,2-dicarboxylic acid from an 8:2 mixture of tert-butanol and water, using (R)-(+)-α-methylbenzyl amine as a chiral reagent. This process is reproducible on a large scale. All these new synthesized chiral ligands were characterized by 1H-NMR, 13C-NMR, IR, and mass spectrometry, as well as elemental analysis and their specific rotations were measured. These new classes of C2 symmetric chiral bisamide ligands could be of special interest in asymmetric transformations.     

Enantiomeric separation of gemfibrozil chiral analogues by capillary electrophoresis with heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin as chiral selector

The enantiomeric separation of gemfibrozil chiral analogues was performed by capillary zone electrophoresis (CZE). Resolution of the enantiomers was achieved using heptakis(2,3,6-tri-O-methyl)-beta-cyclodextrin (TM-beta-CD) as chiral selector dissolved into a buffer solution. In order to optimize the separation conditions, type, pH and concentration of running buffer and chiral selector concentration were varied. For each pH value, the optimum chiral selector concentration that produced the resolution of the isomers was found. The migration order of labile diastereoisomers formed was valued at the optimum experimental conditions by adding a pure optical isomer to the racemic mixture. Data from 1H NMR studies confirmed host-guest interaction between TM-beta-CD and 5-(2,5-dimethylphenoxy)-2-ethylpentanoic acid sodium salt. The hypothesized stoichiometry host:guest was 1:1. An apparent equilibrium constant (Ka) was estimated monitoring the chemical shift variation as a function of TM-beta-CD concentration. Salt effect on complexation equilibrium constant was also investigated.     

Synthesis of phosphoryl-tethered beta-cyclodextrins and their molecular and chiral recognition thermodynamics

Two novel phosphoryl-bridged bis- and tris(beta-cyclodextrin)s of different tether lengths, i.e., bis[m-(N-(6-cyclodextryl)-2-aminoethylaminosulfonyl)phenyl]-m-(chlorosulfonyl)phenylphosphine oxide (5) and tris[m-(N-(6-cyclodextryl)-8-amino-3,6-diazaoctylaminosulfonyl)phenyl]phosphine oxide (6), have been synthesized by reactions of 6-oligo(ethylenediamino)-6-deoxy-beta-cyclodextrins with tris[m-(chlorosulfonyl)phenyl]phosphine oxide. The complex stability constants (K(S)), standard molar enthalpy (Delta H degrees ), and entropy changes (Delta S degrees ) were determined at 25 degrees C for the inclusion complexation of phosphoryl-modified bis- and tris-cyclodextrins (5 and 6, respectively), mono[6-O-(ethoxyhydroxyphosphoryl)]-beta-cyclodextrin (2), mono[6-O-(diethylamino-ethoxyphosphoryl)]-beta-cyclodextrin (3), and mono[6-O-(diphenoxyphosphoryl)]-beta-cyclodextrin (4) with representative alicyclic and N-Cbz-D/L-alanine guests in 0.1 M phosphate buffer solution at pH 7.2 by means of titration microcalorimetry. The thermodynamic parameters obtained indicate that the charge-dipole interaction between the phosphoryl moiety and the negatively charged guests, as well as the conformational difference of modified beta-cyclodextrins in aqueous solution, significantly contribute to the inclusion complexation and the enhanced chiral discrimination. The interactions and binding modes between the hosts and chiral guests were further studied by two-dimensional NMR spectroscopy to elucidate the influence of the structural features of hosts on their increased chiral recognition ability and to establish the correlation between the conformation of the resulting complexes and the thermodynamic parameters obtained.     

Enantioseparation of nuarimol by affinity electrokinetic chromatography-partial filling technique using human serum albumin as chiral selector

The present paper deals with the enantiomeric separation of nuarimol enantiomers by affinity EKC-partial filling technique using HSA as chiral selector. Firstly, a study of nuarimol interactions with HSA by CE-frontal analysis was performed. The binding parameters obtained for the first site of interaction were n(1) = 0.84; K(1) = 9.7 +/- 0.3x10(3 )M(-1) and the protein binding percentage of nuarimol at physiological concentration of HSA was 75.2 +/- 0.2%. Due to the moderate affinity of nuarimol towards HSA the possibility of using this protein as chiral selector for the separation of nuarimol using the partial filling technique was evaluated. A multivariate optimization approach of the most critical experimental variables in enantioresolution, running pH, HSA concentration and plug length was carried out. Separation of nuarimol enantiomers was obtained under the following selected conditions: electrophoretic buffer composed of 50 mM Tris at pH 7.3; 160 muM HSA solution applied at 50 mbar for 156 s as chiral selector; nuarimol solutions in the range of 2-8x10(-4) M injected hydrodynamically at 30 mbar for 2 s and the electrophoretic runs performed at 30 degrees C applying 15 kV voltage. Resolution, accuracy, reproducibility speed and cost of the proposed method make it suitable for quality control of the enantiomeric composition of nuarimol in formulations and for further toxicological studies. The results showed a different affinity between nuarimol enantiomers towards HSA.     

Nuclear magnetic resonance studies for the chiral recognition of the novel chiral stationary phase derived from 18-crown-6 tetracarboxylic acid

Enantioselectivities observed in high-performance liquid chromatography (HPLC) with the novel chiral stationary phase (CSP-18C6I) derived from (+)-18-crown-6 tetracarboxylic acid (18C6H₄) were investigated by using nuclear magnetic resonance (NMR) spectrometry. The elution orders in CSP-18C6I, that is, the S-enantiomer of 1-(1-naphthyl)ethylamine (1-NEA) and the

Full-size image

-enantiomer (S-form) of alanine-β-naphthylamide (Ala-β-NA) eluted prior to each corresponding enantiomer, were successfully explained on the basis of the apparent binding constants (K_a) of the enantiomers to the CSP moiety which were calculated from ¹H-NMR experiments. Detailed HPLC and NMR studies for the chiral recognition of racemic amino compounds with 18C6H₄ hosts showed that ¹H-NMR spectrometry is a useful technique for the investigation of the chiral recognition mechanism in HPLC. Additionally, it was found 18C6H₄ can be recommended as a useful chiral shift reagent for the enantiomeric excess determination by ¹H-NMR.