Catalytic polymerization and facile grafting of poly(furfuryl alcohol) to single-wall carbon nanotube: preparation of nanocomposite carbon

A nanocomposite carbon was prepared by grafting a carbonizable polymer, poly(furfuryl alcohol) (PFA), to a single-wall carbon nanotube (SWNT). The SWNT was first functionalized with arylsulfonic acid groups on the sidewall via a method using a diazonium reagent. Both Raman and FTIR spectroscopies were used to identify the functional groups on the nanotube surface. HRTEM imaging shows that the SWNT bundles are exfoliated after functionalization. Once this state of the SWNTs was accomplished, the PFA-functionalized SWNT (PFA-SWNT) was prepared by in situ polymerization of furfuryl alcohol (FA). The sulfonic acid groups on the surface of the SWNT acted as a catalyst for FA polymerization, and the resulting PFA then grafted to the SWNTs. The surfaces of the SWNTs converted from hydrophilic to hydrophobic when they were wrapped with PFA. The formation of the polymer and the attraction between it and the sulfonic acid groups were confirmed by IR spectra. A nanocomposite carbon was generated by heating the PFA-SWNT in argon at 600 degrees C, a process during which the PFA was transformed to nanoporous carbon (NPC) and the sulfonic acid groups were cleaved from the SWNT. Based upon the Raman spectra and HRTEM images of the composite, it is concluded that SWNTs survive this process and a continuous phase is formed between the NPC and the SWNT.     

Interactions of hydrogen with Pd and Pd/Ni alloy chain-functionalized single walled carbon nanotubes from density functional theory

Density functional theory is employed to study Pd and Pd/Ni alloy monatomic chain-functionalized metallic single walled carbon nanotubes (SWNT(6,6)) and semiconducting SWNT(10,0), and their interactions with hydrogen molecules. The stable geometries and binding energies have been determined for both isolated chains and chains on SWNT surfaces. We found that continuous Pd and Pd/Ni chains form on SWNTs with geometries close to stable geometries in the isolated chains. Ni alloying improves stability of the chains owing to a higher binding energy to both Pd and C atoms. The physical properties of SWNTs are significantly modified by chain functionalization. SWNT(10,0) is transformed to metal by either Pd or alloy chains, or to a smaller band gap semiconductor, depending on the Pd binding site. From calculations for H(2) interactions with the optimized chain-SWNT systems, the adsorption energy per H atom is found to be about 2.6 times larger for Pd/Ni chain-functionalized SWNTs than for pure Pd chain-functionalized SWNTs. Band structure calculations show that the SWNT(10,0) reverts back to semiconductor and SWNT(6,6) has reduced density of states at the Fermi level upon H(2) adsorption. This result is consistent with the experimentally observed increase of electrical resistance when Pd-coated SWNTs are used as H(2) sensing materials. Finally, our results suggest that Pd/Ni-SWNT materials are potentially good H(2)-sensing materials.     

Effect of Backbone Chemical Structure of Polymers on Selective (n,m)Single‐Walled Carbon Nanotube Recognition/Extraction Behavior

The development of a simple and facile method to extract single‐walled carbon nanotubes (SWNTs) with a specific chirality index is one of the most‐crucial issues in the fundamental study and applications of the SWNTs. We have compared the selective recognition/extraction of the SWNT chirality of poly(9,10‐dioctyl‐9,10‐dihydrophenanthrene‐2,7‐diyl) (2C8‐PPhO) to that of poly(9,9‐dioctyfluoreny1‐2,7‐diyl) (2C8‐PFO) that are able to extract specific semiconducting SWNTs free of any metallic SWNTs. Vis/NIR absorption, 2D photoluminescence, and Raman spectroscopy as well as molecular mechanical simulations were used to analyze and understand the obtained chiral selective solubilization behavior. We found that 2C8‐PPhO selectively extracts and enriches the (8,6), (8,7), and (9,7)SWNTs, whose behaviors are different from that of 2C8‐PFO, which preferentially extracts the (7,5), (7,6), (8,6), and (8,7)SWNTs. Our results indicate that 2C8‐PPhO preferably recognizes larger‐diameter SWNTs with higher chiral angles compared to those recognized by 2C8‐PFO. These findings demonstrate that the difference in the non‐aromatic ring numbers on the polymers results in different SWNT chirality recognition/extraction behaviors.     

Raman and IR spectroscopy of chemically processed single-walled carbon nanotubes

IR and Raman spectroscopy has been used to study the evolution of the vibrational spectrum of bundled single-walled carbon nanotubes (SWNTs) during the purification process needed to remove metal catalyst and amorphous carbon present in arc-derived SWNT soot. We have carried out a systematic study to define the different outcomes stemming from the purification protocol (e.g., DO, DO/HCl, DO/HNO(3), H(2)O(2), H(2)O(2)/HCl), where dry oxidation (DO) or refluxing in H(2)O(2) was used in a first purification step to remove amorphous carbon. The second step involves acid reflux (HCl or HNO(3)) to remove the residual growth catalyst (Ni-Y). During strong chemical processing, it appears possible to create additional defects where carbon atoms are eliminated, the ring structure is now open, localized C=C bonds are created, and O-containing groups can be added to this defect to stabilize the structure. Evolution of SWNT skeletal disorder obtained via chemical processing was studied by Raman scattering. Higher intensity ratios of R- and G-band (I(R)/I(G)) are more typically found in SWNT materials with low D-band intensity and narrow G-band components. Using IR transmission through thin films of nanotubes, we can resolve the structure due to functional groups that were present in the starting material or added through chemical processing. After high-temperature vacuum annealing of the purified material at 1100 degrees C, IR spectroscopy shows that most of the added functional groups can be removed and that the structure that remains is assigned to the one- and two-phonon modes of SWNTs.     

Covalent sidewall functionalization of single-walled carbon nanotubes by amino acids

Single-walled carbon nanotubes (SWNTs) with amino acids covalently attached to their side walls, viz., “nanotube-aminoacids,” have been prepared starting from colloidal solutions of fluorinated SWNTs (F-SWNTs) and amino acids in o-dichlorobenzene and heating at 80–150 °C in the presence of pyridine. The syntheses were carried out with the F-SWNTs of approximately 2: 1 (C: F) stoichiometry and several natural α-aino acids with both pro-tected and unprotected carboxyl groups, such as glycine ethyl ester hydrochloride, L-serine ethyl ester hydrochloride, l-cysteine, and trans-4-hydroxy-l-proline. The nanotube-aminoacids have been characterized by Raman and FTIR spectroscopy, atomic force, scanning, and transmission electron microscopies, and thermal gravimetric analysis (TGA). Based on TGA data, the degree of sidewall functionalization in the synthesized SWNT derivatives was estimated to be in the range from one of 32 to one of 8 carbon atoms, depending on the amino acid nature and reaction conditions used. The amino acid-functionalized SWNTs, prepared in this work by simple and inexpensive one-step method, can be valuable precursors for peptide synthesis and targeted drug delivery, design and fabrication of nanocomposites and fibers, and other biomedical and engineering applications. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1035–1043, May, 2008.     

Encapsulation of carbon chain molecules in single-walled carbon nanotubes

The vacuum space inside carbon nanotubes offers interesting possibilities for the inclusion, transportation, and functionalization of foreign molecules. Using first-principles density functional calculations, we show that linear carbon-based chain molecules, namely, polyynes (C(m)H(2), m = 4, 6, 10) and the dehydrogenated forms C(10)H and C(10), as well as hexane (C(6)H(14)), can be spontaneously encapsulated in open-ended single-walled carbon nanotubes (SWNTs) with edges that have dangling bonds or that are terminated with hydrogen atoms, as if they were drawn into a vacuum cleaner. The energy gains when C(10)H(2), C(10)H, C(10), C(6)H(2), C(4)H(2), and C(6)H(14) are encapsulated inside a (10,0) zigzag-shaped SWNT are 1.48, 2.04, 2.18, 1.05, 0.55, and 1.48 eV, respectively. When these molecules come inside a much wider (10,10) armchair SWNT along the tube axis, they experience neither an energy gain nor an energy barrier. They experience an energy gain when they approach the tube walls inside. Three hexane molecules can be encapsulated parallel to each other (i.e., nested) inside a (10,10) SWNT, and their energy gain is 1.98 eV. Three hexane molecules can exhibit a rotary motion. One reason for the stability of carbon chain molecules inside SWNTs is the large area of weak wave function overlap. Another reason concerns molecular dependence, that is, the quadrupole-quadrupole interaction in the case of the polyynes and electron charge transfer from the SWNT in the case of the dehydrogenated forms. The very flat potential surface inside an SWNT suggests that friction is quite low, and the space inside SWNTs serves as an ideal environment for the molecular transport of carbon chain molecules. The present theoretical results are certainly consistent with recent experimental results. Moreover, the encapsulation of C(10) makes an SWNT a (purely carbon-made) p-type acceptor. Another interesting possibility associated with the present system is the direction-controlled transport of C(10)H inside an SWNT under an external field. Because C(10)H has an electric dipole moment, it is expected to move under a gradient electric field. Finally, we derive the entropies of linear chain molecules inside and outside an open-ended SWNT to discuss the stability of including linear chain molecules inside an SWNT at finite temperatures.     

Water-soluble and optically pH-sensitive single-walled carbon nanotubes from surface modification

There is great interest in using single-walled carbon nanotubes (SWNTs) as nanoscale probes and sensors in biological electronics and optical devices because the electronic and optical properties of SWNTs are extremely sensitive to the surrounding environments. A well-controlled modification of SWNT surfaces may provide unique interfaces that are sensitive to the biological variables such as pH, glucose, various ions and proteins. In this paper, we report a facile chemical routine to prepare water-soluble SWNTs that still retain their van Hove singularities after acid oxidative treatment. The aqueous solutions (0.03-0.15 mg/mL) are stable for more than a month. The solubility in water for as-treated SWNTs with surfaces modified by carboxylate groups provides us with a unique opportunity to reveal the relationship of the SWNT electronic and optical properties with pH. Here we present the first observation that after surface modification with carboxylate groups, the optical absorption of the first interband transition of as-treated water-soluble semiconducting SWNTs reversibly responds to the pH change in aqueous solutions. Our results indicate that surface modification of SWNTs is a promising way for preparing chemically selective SWNT interfaces, which may open new exciting opportunities for various applications.     

New Multifunctional Porous Materials Based on Inorganic–Organic Hybrid Single‐Walled Carbon Nanotubes: Gas Storage and High‐Sensitive Detection of Pesticides

Single‐walled carbon nanotubes (SWNTs) that are covalently functionalized with benzoic acid (SWNT‐PhCOOH) can be integrated with transition‐metal ions to form 3D porous inorganic–organic hybrid frameworks (SWNT‐Zn). In particular, N₂‐adsorption analysis shows that the BET surface area increases notably from 645.3 to 1209.9 m² g^?1 for SWNTs and SWNT‐Zn, respectively. This remarkable enhancement in the surface area of SWNT‐Zn is presumably due to the microporous motifs from benzoates coordinated to intercalated zinc ions between the functionalized SWNTs; this assignment was also corroborated by NLDFT pore‐size distributions. In addition, the excess‐H₂‐uptake maximum of SWNT‐Zn reaches about 3.1 wt. % (12 bar, 77 K), which is almost three times that of the original SWNTs (1.2 wt. % at 12 bar, 77 K). Owing to its inherent conductivity and pore structure, as well as good dispersibility, SWNT‐Zn is an effective candidate as a sensitive electrochemical stripping voltammetric sensor for organophosphate pesticides (OPs): By using solid‐phase extraction (SPE) with SWNT‐Zn‐modified glassy carbon electrode, the detection limit of methyl parathion (MP) is 2.3 ng mL^?1.     

Selective synthesis combined with chemical separation of single-walled carbon nanotubes for chirality selection

Single-walled carbon nanotubes (SWNTs) are potential materials for future nanoelectronics. Since the electronic and optical properties of SWNTs strongly depend on tube diameter and chirality, obtaining SWNTs with narrow (n,m) chirality distribution by selective growth or chemical separation has been an active area of research. Here, we demonstrate that a new, bimetallic FeRu catalyst affords SWNT growth with narrow diameter and chirality distribution in methane CVD. At 600 degrees C, methane CVD on FeRu catalyst produced predominantly (6,5) SWNTs according to UV-vis-NIR absorption and photoluminescence excitation/emission (PLE) spectroscopic characterization. At 850 degrees C, the dominant semiconducting species produced are (8,4), (7,6), and (7,5) SWNTs, with much narrower distributions in diameter and chirality than materials grown by other catalysts. Further, we show that narrow diameter/chirality growth combined with chemical separation by ion exchange chromatography (IEC) greatly facilitates achieving single (m,n) SWNT samples, as demonstrated by obtaining highly enriched (8,4) SWNTs with near elimination of metallic SWNTs existing in the as-grown material.     

Chemical engineering of the single-walled carbon nanotube-nylon 6 interface

We report an approach to the chemical engineering of the single-walled carbon nanotube (SWNT)-polymer interfacial interaction in a nylon 6 graft copolymer composite which is based on the degree of SWNT functionality. Continuous fibers are drawn from composites fabricated from the in situ polymerization of caprolactam with SWNTs possessing a range of carboxylic acid (SWNT-COOH) and amide (SWNT-CONH(2)) functionalities. Mechanical performance evaluation of the composite fibers shows that a high concentration of the carboxylic acid functional groups leads to a stronger SWNT-nylon interfacial interaction, as reflected in greater values of the Young's modulus and mechanical strength. Replacement of the COOH group by CONH(2) in the SWNT starting material changes the grafting polymerization chemistry, thereby leading to the covalent attachment of longer graft copolymer chains to the SWNTs, and alters the composite morphology while increasing the composite flexibility and toughness.     

Phthalocyanine-pyrene conjugates: a powerful approach toward carbon nanotube solar cells

In the present work, a new family of pyrene (Py)-substituted phthalocyanines (Pcs), i.e., ZnPc-Py and H(2)Pc-Py, were designed, synthesized, and probed in light of their spectroscopic properties as well as their interactions with single-wall carbon nanotubes (SWNTs). The pyrene units provide the means for non-covalent functionalization of SWNTs via π-π interactions. Such a versatile approach ensures that the electronic properties of SWNTs are not impacted by the chemical modification of the carbon skeleton. The characterization of ZnPc-Py/SWNT and H(2)Pc-Py/SWNT has been performed in suspension and in thin films by means of different spectroscopic and photoelectrochemical techniques. Transient absorption experiments reveal photoinduced electron transfer between the photoactive components. ZnPc-Py/SWNT and H(2)Pc-Py/SWNT have been integrated into photoactive electrodes, revealing stable and reproducible photocurrents with monochromatic internal photoconversion efficiency values for H(2)Pc-Py/SWNT as large as 15 and 23% without and with an applied bias of +0.1 V.     

Enhanced dispersion stability of supramolecular complexes of single-walled carbon nanotubes with fluorene-based conjugated polymers

Supramolecular complexes of single-walled carbon nanotubes (SWNTs) with poly(9,9-didodecylfluorene-2,7-diyl) (PF) derivatives were prepared using a solution dispersion process. A series of novel conjugated PF polymers with carboxyl or hydroxyl end groups at both ends were synthesized by the Yamamoto-type coupling of 2,7-dibromo-9,9-didodecylfluorene using Ni(COD)₂ as a catalyst, and further end-capped with either 4-bromobenzoic acid or 4-bromobenzyl alcohol to obtain the end-functionalized PF with different terminal groups. An α-monocarboxy-ω-mono-methoxy poly(ethylene glycol) was connected to both ends of the PF-containing hydroxyl end groups to produce triblock copolymers of poly(ethylene glycol)-b-polyfluorene-b-poly(ethylene glycol) (PEO-b-PF-b-PEO). These SWNTs were completely wrapped with the conjugated polymers through π–π interactions, which enhanced the solubility of the SWNT complexes in organic media, and prevented the aggregation of the polymer–SWNT complexes into large bundles. This indicates that the dispersion stability of SWNTs is enhanced by the addition of the conjugated polymers.     

Simulation of adsorption of DNA on carbon nanotubes

We report molecular dynamics simulations of DNA adsorption on a single-walled carbon nanotube (SWNT) in an aqueous environment. We have modeled a DNA segment with 12 base pairs (Dickerson dodecamer) and a (8,8) SWNT in water, with counterions to maintain total charge neutrality. Simulations show that DNA binds to the external surface of an uncharged or positively charged SWNT on a time scale of a few hundred picoseconds. The hydrophobic end groups of DNA are attracted to the hydrophobic SWNT surface of uncharged SWNTs, while the hydrophilic backbone of DNA does not bind to the uncharged SWNT. The binding mode of DNA to charged SWNTs is qualitatively different from uncharged SWNTs. The phosphodiester groups of the DNA backbone are attracted to a positively charged SWNT surface while DNA does not adsorb on negatively charged SWNTs. There is no evidence for canonical double-stranded DNA wrapping around either charged or uncharged SWNTs on the very short time scales of the simulations. The adsorption process appears to have negligible effect on the internal stacking structure of the DNA molecule but significantly affects the A to B form conversion of A-DNA. The adsorption of A-DNA onto an uncharged SWNT inhibits the complete relaxation of A-DNA to B-DNA within the time scale of the simulations. In contrast, binding of the A-DNA onto a positively charged SWNT may promote slightly the A to B conversion.     

Rheological, thermal, and mechanical characterizations of polystyrene/single-walled carbon nanotube composites

For preparation of polystyrene (PS) composites, a polymeric dispersant, pyrene-capped polystyrene (PyPS), was applied for noncovalent functionalization of single-walled carbon nanotubes (SWNTs) to improve both dispersion quality and PS–SWNT interfacial interactions. To demonstrate the critical role of PyPS, the composites with the absence of PyPS (PS/SWNT) were also prepared for comparison. Rheological studies suggest that addition of SWNTs, particularly of PyPS-functionalized SWNTs, suppresses significantly large-scale relaxation of PS chains but has little effect on their short-range dynamics. Relative to PS, moderately improved thermal and mechanical properties took place on the composites with either pristine or PyPS-functionalized SWNTs. The PS/PyPS/SWNT composite usually presents better performance than the PS/SWNT one at a fixed SWNT content.     

Adsorption of spillover hydrogen atoms on single-wall carbon nanotubes

Spillover of hydrogen on nanostructured carbons is a phenomenon that is critical to understand in order to produce efficient hydrogen storage adsorbents for fuel cell applications. The spillover and interaction of atomic hydrogen with single-walled carbon nanotubes (SWNTs) is the focus of this combined theoretical and experimental work. To understand the spillover mechanism, very low occupancies (i.e., 1 and 2 H atoms adsorbed) on (5,0), (7,0), (9,0) zigzag (semiconducting) SWNTs and a (5,5) armchair (metallic) SWNT, with corresponding diameters of 3.9, 5.5, 7.0, and 6.8 A, were investigated. The adsorption binding energy of H atoms depends on H occupancy, tube diameter, and helicity (or chirality), as well as endohedral (interior) vs exohedral (exterior) binding. Exohedral binding energies are substantially higher than endohedral binding energies due to easier sp(2)-sp(3) transition in hybridization of carbon on exterior walls upon binding. A binding energy as low as -8.9 kcal/mol is obtained for 2H atoms on the exterior wall of a (5, 0) SWNT. The binding energies of H atoms on the metallic SWNT are significantly weaker (about 23 kcal/mol weaker) than that on the semiconductor SWNT, for both endohedral and exohedral adsorption. The binding energy is generally higher on SWNTs of larger diameters, while its dependence on H occupancy is relatively weak except at very low occupancies. Experimental results at 298 K and for pressures up to 10 MPa with a carbon-bridged composite material containing SWNTs demonstrate the presence of multiple adsorption sites based on desorption hysteresis for the spiltover H on SWNTs, and the experimental results were in qualitative agreement with the molecular orbital calculation results.     

Rectifying diodes from asymmetrically functionalized single-wall carbon nanotubes

Asymmetrically functionalized single-wall carbon nanotubes (SWNTs) have been prepared by a covalent reaction of an 11-mercaptoundecanol-modified Au surface with oxidized SWNT cylinders. While one end of the tubes is attached to gold substrate via ester groups, the free carboxylic substituents on the other end can be either ionized (CO2-) or esterified (CO2Et), creating a donor-acceptor asymmetric and acceptor-acceptor symmetric SWNT, respectively. Study of the SWNT monolayer conductance in Hg drop junction experiments reveals a pronounced diode-like behavior for donor-SWNT-acceptor junctions, while acceptor-SWNT-acceptor junctions are electrically symmetric.     

A density functional study of the 13C NMR chemical shifts in functionalized single-walled carbon nanotubes

The 13C NMR chemical shifts for functionalized (7,0), (8,0), (9,0), and (10,0) single-walled carbon nanotubes (SWNTs) have been studied computationally using gauge-including projector-augmented plane-wave (GIPAW) density functional theory (DFT). The functional groups NH, NCH3, NCH2OH, and CH2NHCH2 have been considered, and different sites where covalent addition or substitution may occur have been examined. The shifts of the carbons directly attached to the group are sensitive to the bond which has been functionalized and may, therefore, be used to identify whether the group has reacted with a parallel or a diagonal C-C bond. The addition of NH to a parallel bond renders the functionalized carbons formally sp3-hybridized, yielding shifts of around 44 ppm, independent of the SWNT radius. Reaction with a diagonal bond retains the formal sp2 hybridization of the substituted carbons, and their shifts are slightly lower or higher than those of the unsubstituted carbon atoms. The calculated 1H NMR shifts of protons in the functional groups are also dependent upon the SWNT-group interaction. Upon decreasing the degree of functionalization for the systems where the group is added to a parallel bond, the average chemical shift of the unfunctionalized carbons approaches that of the pristine tube. At the same time, the shifts of the functionalized carbons remain independent upon the degree of functionalization. For the SWNTs where N-R attaches to a parallel bond, the average shift of the sp2 carbons was found to be insensitive to the substituent R. Moreover, the shifts of the functionalized sp3 carbons, as well as of the carbons within the group itself, are independent of the SWNT radius. The results indicate that a wealth of knowledge may be obtained from the 13C NMR of functionalized SWNTs.     

Preparation of single-walled carbon nanotube (SWNT) gel composites using poly(ionic liquids)

This paper reports a new and practical route for synthesizing nanotube-polymeric ionic liquids gel by non-covalent functionalization of oxidized single-walled carbon nanotube (SWNT) surfaces with imidazolium-based poly(ionic liquids) (PILs), using in situ radical polymerization method. A black and homogeneous precipitate SWNTs was obtained as a gel form, which is well dispersed in aqueous solution without any aggregation. The formation of SWNT gels is explained by the electrostatic attractions or π-bonds between the SWNT surface and the PIL matrix. By anion-exchange reaction of PIL bound to SWNTs, hydrophilic anions in PIL were substituted with hydrophobic anions, resulting in an effective transfer of SWNT-PIL hydrogels to organogels. The result also showed that SWNTs can effectively improve the conductivity along with the thermal stability of nanocomposite gels.     

SWNTs as catalyst and/or support in the catalytic decomposition of hydrocarbons

Various SWNT samples as either catalyst or catalytic support were used in the chemical vapor deposition (CVD) method for the growth of MWNTs. Catalysts were prepared by the impregnation of SWNT soot with different transition metals. Decomposition of acetylene was investigated at different temperatures (650–720 °C). The quality of both original SWNTs and the newly formed carbon nanostructures was assessed by TEM. A significant difference was found between selectivities of original (known as metallic impurities in SWNT soot) and the posteriorly deposited metallic particles. In the presence of active catalyst SWNT ropes tend to disappear, absorbed into carbon fibers or MWNTs.     

Pyridine-functionalized single-walled carbon nanotubes as gelators for poly(acrylic acid) hydrogels

Pyridine-functionalized single-walled carbon nanotubes (SWNTs) are prepared from the addition of a pyridine diazonium salt to nanotubes. The location and distribution of the functional groups is determined by atomic force microscopy using electrostatic interactions with gold nanoparticles. The pyridine-functionalized SWNTs are able to act as cross-linkers and hydrogen bond to poly(acrylic acid) to form SWNT hydrogels. The pyridine-functionalized SWNTs are further characterized using Raman, FTIR, UV/vis-NIR, and X-ray photoelectron spectroscopy and thermogravimetric analysis-mass spectrometry.