Regio- and stereo-selectivities of the ortho and meta photocycloaddition reactions of ethylenes to benzene and its simple derivatives

The photoreactions of benzene, toluene, anisole, and benzonitrile with acrylonitrile, methacrylonitrile, and vinyl acetate, and of toluene and o- and p-xylene with maleic anhydride are described. The acrylonitriles do not react with benzonitrile but yield mixtures of ortho photocycloadducts with the other arenes. Contrary to previous findings both exo and endo stereoisomers of the ortho cycloadducts of benzene and acryloitrile are formed: the reaction is selective towards the exo isomer but the stereoisomers from methacrylonitrite and benzene are formed with approximately equal efficiencies. Complex mixtures of regio- and stereoisomers of the ortho cycloadducts are formed between toluene and the acrylonitriles but their addition to anisole is more selective and in acetonitrile essentially only 1,2-attack of the ethylene on the arene is observed. The 2:1 photoadducts of maleic anhydride with toluene and o- and p-xylene reflect formation of two regio ortho photocycloadducts in each case. The variation in the ratios of these isomers with temperature and light intensity is interpreted in terms of the differing photolabilities of the 1:1 adducts and their reactivities towards the thermal addition of the second molecule of maleic anhydride. Vinyl acetate undergoes 1,2-cycloaddition to benzonitrile but with the other arenes, meta cycloadducts are favoured. These latter additions are specifically 2,6- with respect to toluene and anisole but there is little regioselectivity with respect to the ethylene although the 7-endo acetate of the meta cycloadduct with benzene does constitute 60% of the reaction mixture.     

Antioxidant activity and phenolic compounds of buckwheat and barley by the data of spectrophotometry and HPLC

The antioxidant activity of buckwheat and barley extracts by reaction with 1,1-diphenyl-2-picrylhydrazyl and the total of phenolic compounds have been determined using the Folin-Ciocalteu reagent. It has been found that water-ethanol extracts of buckwheat are characterized by higher antioxidant activity (6.2 ± 0.5 μM-eq. of Trolox/g) and concentration of phenolic compounds (4.41 ± 0.07 mg-eq. of rutin/g) compared to barley extracts (4.2 ± 0.3 μM-eq. of Trolox/g and 2.4 ± 0.1 mg-eq. of rutin/g, respectively). A series of phenolic compounds have been identified by HPLC with UV detection and mass spectrometric detection with electrospray ionization. The main phenolic compounds-antioxidants in buckwheat extracts are rutin, catechin and epicatechin, 1-O-caffeoyl-O-rutinoside (m/z 487), and epicatechin-O-3,4-dimethylgallate (m/z 469), and in the barley extract, catechin, prodelphinidin B3 (m/z 593), procyanidin B3 (m/z 577), and procyanidin C2 (m/z 865).     

Synthesis and antibacterial properties of new phenothiazinyl- and phenyl-nitrones

The synthesis of new phenothiazinyl- and phenyl-nitrones under classical versus microwave heating conditions is described. Better yields were obtained under microwave irradiation in the condensation reactions of phenothiazyl-carbaldehyde with hydroxylamine derivatives. The structures of the new phenothiazinyl-nitrones were assigned on the basis of MS, FT–IR and NMR spectra. The new nitrones and some known phenyl-nitrones were screened for their antibacterial and antifungal activity against several Candida species, Gram negative bacteria, such as E. coli, Citrobacter spp, Morganella spp, Pseudomonas aeruginosa, Klebsiella pneumoniae (± ESBL), Proteus spp, Acinetobacter spp and the Gram positive bacterium Staphylococcus aureus, with moderate results.     

Evaluation of Nutritional Substances and Investigation of Antioxidant and Antimicrobial Potentials of Boerhavia diffusa with in Silico Molecular Docking

Boerhavia diffusa L. Nyctanginaceae (B. diffusa) is a medicinal herb commonly considered as a weed. The exploration of phytochemicals in different parts of B. diffusa with different solvents will create awareness, along with the suitable solvent and method for extraction of pharmaceutical compounds. Hence, the present study focuses on phytochemical analysis of B. diffusa leaves, stems, and roots in various solvents with hot and cold extraction. The decoctions performed well in most of the qualitative and quantitative tests, along with the DPPH assay. The aqueous extract showed a good result in the FRAP assay and ABTS assay. In the antimicrobial test, the B. diffusa root ethanol extract inhibited the growth of Pseudomonas aeruginosa and Staphylococcus aureus with zones of inhibition of about 8 mm and 20 mm at 200 µg concentration, respectively. Using a molecular docking approach, the top four ranked molecules from the crude extract of B. diffusa profiled from GC–MS spectroscopy in terms of growth inhibition of the pathogenic bacterium P. aeruginosa were selected; among them, 2-(1,2 dihydroxyethyl)-5-[[2,5,7,8-tetramethyl-2-(4,8,12-trimethyltridecyl)-3,4-dihydrochromen-6-yl]oxy]oxolane-3,4-diol exhibited the minimum binding score, revealing high affinity in complex. B. diffusa is highly nutritious, and the maceration and decoction extracts were similar except for the chloroform extract that was found to be weak.     

Structural and dynamical properties of aqueous mixtures of pectin and chitosan

In this study phase separation, structure, and dynamics of aqueous pectin-chitosan mixtures of different ratios and a pure aqueous pectin sample have been investigated under various conditions by turbidimetry, SANS and dynamic light scattering (DLS). Only the mixture with r = 0.75 gelled upon decreasing the temperature ((r ≡ m_pectin/(m_pectin + m_chitosan), where m denotes the mass of the considered component). The pure pectin sample (r = 1) did not gel and the decrease in temperature seemed to promote phase separation. The addition of chitosan reduced the tendency of pectin to phase separate in the mixtures of pectin and chitosan. The general trend when cooling the samples was that the turbidity and the growth of the turbidity became more pronounced as the amount of pectin in the mixture was increased. The wavelength dependence of the turbidity indicated a change of the conformation of pectin chains from an extended form to a more compact structure in pectin solutions without chitosan as the temperature decreased. This was not observed for the mixture of pectin and chitosan. SANS measurements revealed excess scattered intensity in the low wave vector area with the strongest upturn for the pure pectin sample (r = 1). DLS experiments showed longer slow relaxation times after a temperature quench for all samples, with the most pronounced effect for the mixture of pectin and chitosan with r = 0.75. The synergism between pectin and chitosan at high pectin contents (r = 0.75) generated large association complexes over time.     

Evaluation of the Membrane Damage Mechanism of Chlorogenic Acid against Yersinia enterocolitica and Enterobacter sakazakii and Its Application in the Preservation of Raw Pork and Skim Milk

Plant-derived antimicrobial agents have adequate antimicrobial effects on food-borne pathogens, which can be used as food preservatives. The purpose of this study was to evaluate the antibacterial mechanism of chlorogenic acid (CA) against Yersinia enterocolitica and Enterobacter sakazakii. The minimum inhibitory concentration (MIC) of CA was determined by employing the broth microdilution method. Then, the cell function and morphological changes of Y. enterocolitica and E. sakazakii treated with CA were characterized. Finally, the growth inhibition models of Y. enterocolitica in raw pork and E. sakazakii in skim milk were constructed through the response surface methodology. The results demonstrated that CA has a satisfactory inhibitory effect against Y. enterocolitica and E. sakazakii with a MIC of 2.5 mg/mL. In addition, CA inhibited the growth of Y. enterocolitica and E. sakazakii via cell membrane damage, such as depolarization of the cell membrane, reduction in intracellular adenosine triphosphate (ATP) and pH levels, and destruction of cell morphology. Moreover, CA reduced two log cycles of Y. enterocolitica in raw pork and E. sakazakii in skim milk at a certain temperature. According to the corresponding findings, CA has the potential to be developed as an effective preservative to control Y. enterocolitica and E. sakazakii-associated foodborne diseases.     

Localization of electrons and excitations

Electrons, electron holes, or excitations in finite or infinite ‘multimer systems’ may be localized or delocalized. In the theory of Hush, localization depends on the ratio Δ/λ (Δ/2 = coupling; λ = reorganization energy). The latter theory has been extended to the infinite system [S. Larsson, A. Klimkāns, Mol. Cryst. Liq. Cryst. 355 (2000) 217]. The metal/insulator transition often takes place abruptly as a function of Δ/λ. It is argued that localization in a system with un-filled bands cannot be determined on the basis of Mott–Hubbard U alone, but depends on the number of accessible valence states, reorganization energy λ and coupling Δ (=2t). In fact U = 0 does not necessarily imply delocalization. The analysis here shows that there are many different situations for an insulator to metal transition. Charge transfer in doped NiO is characterized by Ni²⁺ − Ni³⁺ exchange while charge transfer in pure NiO is characterized by a disproportionation 2Ni²⁺ → Ni⁺ + Ni³⁺. In spite of the great differences between these two cases, U has been applied without discrimination to both. The relevant localization parameters appear to be Δ and λ in the first case, with only two oxidation states, and U, Δ and λ in the second case with three oxidation states. The analysis is extended to insulator-metal transitions, giant magnetic resistance (GMR) and high T_c superconductivity (SC). λ and Δ can be determined quite accurately in quantum mechanical calculations involving only one and two monomers, respectively.     

Expedious synthesis of polyhydroxylated selena and thia-heterocycles via Se and S-ring closure of α,ω-dibromoalditols

The selena and thiaanhydro alditols (with xylo, ribo, d-arabino, erythro, d,l-threo and d-manno configuration) were easily and expeditiously synthesized in good to excellent yields by reaction of selenure and sulfur ions as binucleophiles with α,ω-dibromoalditols as bis-electrophilic substrates. With the 1,6-dibromo-d-glucitol derivative as substrate, only the corresponding thiepane derivative was obtained while the selenaheterocyclistation attempte led to complex mixture.     

Kinetics of heat-induced and photochemical transformations of quinonimines and their derivatives

Heat-induced transformations of N-[2,6-diisopropylphenyl]-3,5-di(tert-butyl)-, N-[2,6-diethylphenyl]-3,5-di(tert-butyl)-, and N-[2-methyl-6-ethylphenyl]-3,5-di(tert-butyl)-o-benzoquinonimines in nonane follow the first-order rate equation, whereas that of N-[2,5-di(tert-butyl)phenyl]-3,5-di(tert-butyl-o-benzoquinonimine obey the second-order rate equation. Kinetic parameters of these reactions have been determined. 4aH-Phenoxazine derivatives of quinonimines are intermediates of the heat-induced transformations following the first-order kinetics; under the irradiation with 405 nm light they undergo the ring opening to give the starting compounds with quantum yield close to unity.     

Synthesis and properties of BCOD-fused trithiasapphyrin and trithiabenzosapphyrins

Bicyclo[2.2.2]octadiene(BCOD)-fused trithiasapphyrin was prepared by 3+2 condensation of BCOD-fused thiatripyrrane with BCOD-fused bithiophene. The BCOD-fused trithiasapphyrin was successfully converted to pentabenzo[b,g,l,q,v]sapphyrin by the thermal retro-Diels-Alder reaction. In this case, trithiapentabenzo[b,g,l,q,v]- and trithiadibenzo[g,q]sapphyrins were selectively prepared by control of the temperature in the thermal retro-Diels-Alder reaction.     

Monte Carlo simulation of adsorption of binary and quaternary alkane isomers mixtures in zeolites: Effect of pore size and structure

Grand canonical Monte Carlo and configurational bias Monte Carlo techniques were employed to simulate the adsorption of binary mixtures of butane isomers and quaternary mixtures in nine zeolites at 300 K. For binary mixtures the results show there is a critical pore size, which is 10-membered-ring about 5.6 Å. The channel sizes of BEA, ISV, MOR and CFI are larger than this critical pore size, they prefer i-butane than n-butane, whereas TON with smaller channel size than critical pore size prefers n-butane than i-butane, but its selectivity decreases with pressure increasing. MFI, MEL and TER prefer i-butane than n-butane at low pressure, but with pressure increasing, the selectivity is reversed. BOG prefers i-butane than n-butane but the selectivity decreased with pressure increasing. It demonstrates that the adsorption and selectivity are controlled by both pore size and pore structure. The n-butane–i-butane–n-pentane–2-methylbutane quaternary mixtures adsorbed in these nine zeolites were studied, and the results show alkane chain length dependence at low pressure, but the adsorption is controlled by pore size and structure with pressure increasing in all the zeolites except for TON and BOG.     

Physical-Mechanical Behavior and Water-Barrier Properties of Biopolymers-Clay Nanocomposites

The preparation and characterization of biodegradable films based on starch-PVA-nanoclay by solvent casting are reported in this study. The films were prepared with a relation of 3:2 of starch:PVA and nanoclay (0.5, 1.0, and 1.5% w/v), and glycerol as plasticizer. The nanoclays before being incorporated in the filmogenic solution of starch-PVA were dispersed in two ways: by magnetic stirring and by sonication. The SEM results suggest that the sonication of nanoclay is necessary to reach a good dispersion along the polymeric matrix. FTIR results of films with 1.0 and 1.5% w/v of sonicated nanoclay suggest a strong interaction of hydrogen bond with the polymeric matrix of starch-PVA. However, the properties of WVP, tensile strength, percentage of elongation at break, and Young’s modulus improved to the film with sonicated nanoclay at 0.5% w/v, while in films with 1.0 and 1.5% w/w these properties were even worse than in film without nanoclay. Nanoclay concentrations higher than 1.0 w/v saturate the polymer matrix, affecting the physicochemical properties. Accordingly, the successful incorporation of nanoclays at 0.5% w/v into the matrix starch-PVA suggests that this film is a good candidate for use as biodegradable packaging.     

Syntheses and evaluation of the bioluminescent activity of (S)-Cypridina luciferin and its analogs

Cypridina luciferin is the substrate in the bioluminescence of a luminous ostracod Cypridina (Vargula) hilgendorfii. Cypridina luciferin contains a chiral center in the sec-butyl moiety. Here, we report a convenient method for the preparation of (S)-Cypridina luciferin by the condensation of (S)-1,1-diethoxy-3-methylpentan-2-one with ethioluciferin. The light yield of the synthesized (S)-luciferin in the presence of Cypridina luciferase was about 1.7 times as active as that of racemic form. Furthermore, several luciferin analogs prepared by the same condensation with different α-ketoacetal derivatives showed moderate light yield with Cypridina luciferase. These readily available Cypridina luciferin and analogs are applicable to the bioluminescent detection of Cypridina luciferase.     

Structures and syntheses of layered and framework amine-bearing uranyl phosphate and uranyl arsenates

Two hydrated uranyl arsenates and a uranyl phosphate were synthesized by hydrothermal methods in the presence of amine structure-directing agents and their structures determined: (N₂C₆H₁₄)[(UO₂)(AsO₄)]₂(H₂O)₃, DabcoUAs, {NH(C₂H₅)₃}[(UO₂)₂(AsO₄)(AsO₃OH)], TriethUAs, and (N₂C₄H₁₂)(UO₂)[(UO₂)(PO₄)]₄(H₂O)₂, PiperUP. Intensity data were collected at room temperature using MoKα X-radiation and a CCD-based area detector. The crystal structures were refined by full-matrix least-squares techniques on the basis of F² to agreement indices (DabcoUAs, TriethUAs, PiperUP) wR₂=5.6%, 8.3%, 7.2% for all data, and R₁=2.9%, 3.3%, 4.0%, calculated for 1777, 5822, 9119 unique observed reflections (|F_o|?4σ_F), respectively. DabcoUAs is monoclinic, space group C2/m, Z=2, a=18.581(1), b=7.1897(4), c=7.1909(4) Å, β=102.886(1)°, V=936.43(9) Å³, D_calc=3.50 g/cm³. TriethUAs is monoclinic, space group P2₁/n, Z=4, a=9.6359(4), b=18.4678(7), c=10.0708(4) Å, β=92.282(1)°, V=1790.7(1) Å³, D_calc=3.41 g/cm³. PiperUP is monoclinic, space group Pn, Z=2, a=9.3278(4), b=15.5529(7), c=9.6474(5) Å, β=93.266(1)°, V=1397.3(1) Å³, D_calc=4.41 g/cm³. The structure of DabcoUAs contains the autunite-type sheet formed by the sharing of vertices between uranyl square bipyramids and arsenate tetrahedra. The triethylenediammonium cations are located in the interlayer along with two H₂O groups and are disordered. Both TriethUAs and PiperUP contain sheets formed of uranyl pentagonal bipyramids and tetrahedra (arsenate and phosphate, respectively) with the uranophane sheet-anion topology. In TriethUAs, triethlyammonium cations are located in the interlayer. In PiperUP, the sheets are connected by a uranyl pentagonal bipyramid that shares corners with phosphate tetrahedra of adjacent sheets, resulting in a framework with piperazinium cations and H₂O groups in the cavities of the structure.     

Essential Oils from Residual Foliage of Forest Tree and Shrub Species: Yield and Antioxidant Capacity

Increasing applications and markets for essential oils could bring new opportunities for cost-effective and sustainable management of unused forestry biomass; however, better knowledge of the production and application of such essential oils is necessary. The objective of this work is to contribute to greater knowledge of the essential oil production on a pilot scale from foliage biomass of wild shrubs and tree residues produced in some forestry enhancement operations and to study their antioxidant capacity (ORAC—oxygen radical absorbance capacity). Fresh biomass (twigs) of seven species (E. globulus, E. nitens, P. pinaster, P. sylvestris, R. officinalis, C. ladanifer, and J. communis) was manually collected in Spain in two different periods and was ground at 30 mm and distilled in a 30 L stainless steel still with saturated steam. The essential oil components were identified by GC–MS and quantified by GC–FID, and their antioxidant activity was determined with the ORAC method. Promising results on essential oil yield were obtained with E. globulus, E. nitens, R. officinalis, and J. communis. All essential oils studied exhibited antioxidant capacity by the ORAC assay, particularly that from C. ladanifer. Moreover, oxygenated sesquiterpenes contents, one of the minor components of oils, were significantly correlated with ORAC values.     

Coupling and cycloaddition of ynamides: homo- and Negishi coupling of tosylynamides and intramolecular [4+2] cycloaddition of N-(o-ethynyl)phenyl ynamides and arylynamides

N,N′-aryl- and N,N′-alkyl-buta-1,3-diyne-1,4-ditosylamides have been synthesized for the first time, in good to excellent yields, by copper-catalyzed dimerization of the corresponding N-aryl or N-alkyl tosylynamides. Negishi coupling of N-ethynylzinc tosylamides derivatives with (hetero)aryl iodides in the presence of Pd₂dba₃ and triphenylphosphine affords N-aryl and N-alkyl arylynamides in yields of up to 90%. Intramolecular [4+2] cycloaddition reactions of N-ethynylphenyl ynamides and arylynamides allow the synthesis of carbazoles and benzannulated and heteroannulated carbazoles in moderate-to-good yields.     

Speeds of sound and isentropic compressibilities of binary mixtures containing trialkylamines with alkanes and mono-alkylamines at 303.15 and 313.15 K

Isentropic compressibilities κ_S, and excess isentropic compressibilities κ_S^E have been determined from measurements of speeds of sound u and densities ρ of 14 binary mixtures of triethylamine (TEA) and tri-n-butylamine (TBA) with n-hexane, n-octane, iso-octane, n-propylamine, n-butylamine, n-hexylamine and n-octylamine. The relative magnitude and sign of κ_S^E have been interpreted in terms of molecular interactions and interstitial accommodation. The values of κ_S^E for TEA + alkane are positive while for TBA + alkane are negative. The values of κ_S^E for TEA + primary amine become progressively less positive and eventually to negative with the increase in chain length of alkylamine. In case of TBA + primary amine, the values of κ_S^E increase from n-propylamine to n-butylamine, and then decrease with chain length of primary amine. The experimental speeds of sound u have been analyzed in terms of collision factor theory, free length theory and Prigogine–Flory–Patterson statistical theory of solutions.     

Novel and facile solution-phase synthesis of 2,5-diketopiperazines and O-glycosylated analogs

This work describes the synthesis in solution of a series of related diketopiperazines with potential biological activities: cyclo(l-Pro-l-Ser), cyclo(l-Phe-l-Ser), cyclo(d-Phe-l-Ser) and the corresponding glycosylated analogs of the latter, cyclo[d-Phe-l-Ser(αGlcNAc)] and cyclo[d-Phe-l-Ser(βGlcNAc)]. The synthetic approach involved coupling reactions of -OH or O-glycosylated serine benzyl esters with NFmoc-protected amino acids (Pro or Phe), followed by one-pot deprotection-cyclization reaction in the presence of 20% piperidine in DMF.     

Syntheses and reactions of terpene β-hydroxyselenides and β-hydroxydiselenides

A convenient method for the synthesis of optically active trans-hydroxyselenides and trans-hydroxydiselenides from the bicyclic terpene group based on the reactions of sodium selenide or sodium diselenide with cis- and trans-(+)-3-carane, trans-(+)-2-carane and (?)-β-pinane epoxides is described. The corresponding cis-hydroxy and cis-methoxydiselenides were obtained in the reaction of sodium diselenide with β-hydroxy- and β-methoxytosylates. The influence of a hydroxy group at the β-position on the diastereomeric ratio of the products of the asymmetric methoxyselenenylation of styrene has been established by composition of the products, crystal structure analyses, and theoretical calculations using a DFT method on the B3LYP level (6-311G(d)).