Thermodynamic properties of quinoxaline-1,4-dioxide derivatives: a combined experimental and computational study

The mean (N-O) bond dissociation enthalpies were derived for three 2-methyl-3-(R)-quinoxaline 1,4-dioxide (1) derivatives, with R = methyl (1a), ethoxycarbonyl (1b), and benzyl (1c). The standard molar enthalpies of formation in the gaseous state at T = 298.15 K for the three 1 derivatives were determined from the enthalpies of combustion of the crystalline solids and their enthalpies of sublimation. In parallel, accurate density functional theory-based calculations were carried out in order to estimate the gas-phase enthalpies of formation for the corresponding quinoxaline derivatives. Also, theoretical calculations were used to obtain the first and second N-O dissociation enthalpies. These dissociation enthalpies are in excellent agreement with the experimental results herewith reported.     

Combined experimental and computational study of the thermochemistry of the fluoroaniline isomers

The standard (p degrees = 0.1 MPa) molar enthalpies of formation in the condensed phase of all the fluoroanilines, with the exception of the 2,3,5-trifluoroaniline compound, were derived from the standard molar energies of combustion in oxygen at T = 298.15 K, measured by rotating bomb combustion calorimetry. Calvet high-temperature vacuum sublimation experiments were performed to measure their enthalpies of vaporization or sublimation. These experiments allowed the determination of the standard molar enthalpies of formation in the gaseous phase and at T = 298.15 K. These values are also compared with estimates based on G3MP2B3 and BP86/6-31+G(d) computations, which have been extended also to the fluoroaniline that was not studied experimentally. The results are in close agreement with a mean deviation of approximately 3 kJ.mol-1. The largest difference between experimental and G3MP2B3 values is found for the pentafluoroaniline (-7.0 kJ.mol-1). For the three monofluoroanilines, the composite approach has been used also to compute gas-phase acidities, electron and proton affinities, ionization enthalpies and N-H bond dissociation enthalpies. The computed values compare well with available experimental results supporting the new computed data.     

Calorimetric and computational study of the thermochemistry of phenoxyphenols

Thermodynamic properties of 3- and 4-phenoxyphenol have been determined by using a combination of calorimetric and effusion techniques as well as by high-level ab initio molecular orbital calculations. The standard (p° = 0.1 MPa) molar enthalpies of formation in the condensed and gas states, Δ(f)H(m)°(cr or l) and Δ(f)H(m)°(g), at T = 298.15 K, of 3- and 4-phenoxyphenol were derived from their energies of combustion in oxygen, measured by a static bomb calorimeter, and from the enthalpies of vaporization or sublimation derived respectively by Calvet microcalorimetry for the 3-phenoxyphenol and by Knudsen effusion technique for the 4-phenoxyphenol. The theoretically estimated gas-phase enthalpies of formation were calculated from high-level ab initio molecular orbital calculations at the G3(MP2)//B3LYP level of theory. Furthermore, this composite approach was also used to obtain information about the gas-phase acidities, gas-phase basicities, proton and electron affinities, adiabatic ionization enthalpies, and, finally, O?H bond dissociation enthalpies. The good agreement between the G3MP2B3-derived values and the experimental gas-phase enthalpies of formation for the 3- and 4-phenoxyphenol gives confidence to the estimate concerning the 2-phenoxyphenol isomer, which was not experimentally studied, and to the estimates concerning the radical and the anion. Additionally, the experimental values of gas-phase enthalpies of formation were also compared with estimates based on the empirical scheme developed by Cox.     

Experimental and computational investigation of the energetics of the three isomers of monochloroaniline

The standard (p degrees = 0.1 MPa) molar enthalpies of formation of 2-, 3-, and 4-chloroaniline were derived from the standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by rotating bomb combustion calorimetry. The Calvet high-temperature vacuum sublimation technique was used to measure the enthalpies of vaporization or sublimation of the three isomers. These two thermodynamic parameters yielded the standard molar enthalpies of formation of the three isomers of chloroaniline, in the gaseous phase, at T = 298.15 K, as 53.4 +/- 3.1 kJ.mol(-1) for 2-chloroaniline, 53.0 +/- 2.8 kJ.mol(-1) for 3-chloroaniline, and 59.7 +/- 2.3 kJ.mol(-1) for 4-chloroaniline. These values, which correct previously published data, were used to test the computational methodologies used. Therewith, gas-phase acidities, proton affinities, electron donor capacities, and N-H bond dissociation enthalpies were calculated and found to compare well with available experimental data for these parameters.     

Thermochemistry of 2-amino-3-quinoxalinecarbonitrile-1,4-dioxide. Evaluation of the mean dissociation enthalpy of the (N-O) bond

The standard enthalpy of formation of the 2-amino-3-quinoxalinecarbonitrile-1,4-dioxide compound in the gas-phase was derived from the enthalpies of combustion of the crystalline solid measured by static bomb combustion calorimetry and its enthalpy of sublimation determined by Knudsen mass-loss effusion at T= 298.15 K. This value is (383.8 +/- 5.4) kJ mol(-1) and was subsequently combined with the experimental gas-phase enthalpy of formation of atomic oxygen and with the computed gas-phase enthalpy of formation of 2-amino-3-quinoxalinecarbonitrile, (382.0 +/- 6.3) kJ mol(-1), in order to estimate the mean (N-O) bond dissociation enthalpy in the gas-phase of 2-amino-3-quinoxalinecarbonitrile-1,4-dioxide. The result obtained is (248.3 +/- 8.3) kJ mol(-1), which is in excellent agreement with the B3LYP/6-311+G(2d,2p)//B3LYP/6-31G(d) computed value.     

Thermolyses of O-phenyl oxime ethers. A new source of iminyl radicals and a new source of aryloxyl radicals

Six O-phenyl ketoxime ethers, RR'C=NOPh 1-6, with RR' = diaryl, dialkyl, and arylalkyl, together with N-phenoxybenzimidic acid phenyl ether, PhO(Ph)C=NOPh, 7, have been shown to thermolyze at moderate temperatures with "clean" N-O bond homolyses to yield iminyl and phenoxyl radicals, RR'C=N(*) and PhO(*). Since 1-6 can be synthesized at room temperature, these compounds provide a new and potentially useful source of iminyls for syntheses. The iminyl from 7 undergoes a competition between beta-scission, to PhCN and PhO(*), and cyclization to an oxazole. Rate constants, 10(6) k/s(-1), at 90 degrees C for 1-6 range from 4.2 (RR' = 9-fluorenyl) to 180 (RR' = 9-bicyclononanyl), and that for 7 is 0.61. The estimated activation enthalpies for N-O bond scission are in satisfactory agreement with the results of DFT calculations of N-O bond dissociation enthalpies, BDEs, and represent the first thermochemical data for any reaction yielding iminyl radicals. The small range in k (N-O homolyses) is consistent with the known sigma structure of these radicals, and the variations in k and N-O BDEs with changes in RR' are rationalized in terms of iminyl radical stabilization by hyperconjugation: RR'C=N(*) <--> R(*)R'C[triple bond]N. Calculated N-H BDEs in the corresponding RR'C=NH are also presented.     

Bond dissociation energies in nitramines

The enthalpies of formation in the standard state and in the gas phase were recommended for a series of secondary nitramines and n-butyldinitramine on the basis of the experimental enthalpies of combustion and vaporization and literature data. An analysis of the main thermochemical values (the enthalpies of formation in the gas phase and the enthalpies of atomization) showed that the energy properties of the nitramine group are independent of the structure of the molecules studied and of the number of functional groups in them. The enthalpies of formation of the alkylnitramine radicals were determined. The values obtained make it possible to calculate the bond dissociation energies in the nitramines and their radicals of different structures.     

Molecular energetics of cytosine revisited: a joint computational and experimental study

A static bomb calorimeter has been used to measure the standard molar energy of combustion, in oxygen, at T = 298.15 K, of a commercial sample of cytosine. From this energy, the standard (p degrees = 0.1 MPa) molar enthalpy of formation in the crystalline state was derived as -(221.9 +/- 1.7) kJ.mol(-1). This value confirms one experimental value already published in the literature but differs from another literature value by 13.5 kJ.mol(-1). Using the present standard molar enthalpy of formation in the condensed phase and the enthalpy of sublimation due to Burkinshaw and Mortimer [J. Chem. Soc., Dalton Trans. 1984, 75], (155.0 +/- 3.0) kJ.mol(-1), results in a value for the gas-phase standard molar enthalpy of formation for cytosine of -66.9 kJ.mol(-1). A similar value, -65.1 kJ.mol(-1), has been estimated after G3MP2B3 calculations combined with the reaction of atomization on three different tautomers of cytosine. In agreement with experimental evidence, the hydroxy-amino tautomer is the most stable form of cytosine in the gas phase. The enthalpies of formation of the other two tautomers were also estimated as -60.7 kJ.mol(-1) and -57.2 kJ.mol(-1) for the oxo-amino and oxo-imino tautomers, respectively. The same composite approach was also used to compute other thermochemical data, which is difficult to be measured experimentally, such as C-H, N-H, and O-H bond dissociation enthalpies, gas-phase acidities, and ionization enthalpies.     

Theoretical study of the nitroalkane thermolysis. 1. Computation of the formation enthalpy of the nitroalkanes, their isomers and radical products

The gas phase enthalpies of formation of mono-, di-, tri-, tetranitromethane and nitroethane, as well as of their nitrite and aci-form isomers were calculated using different multilevel (G2, G3, G2M(CC5)) and density functional theory (DFT)-based (B3LYP, MPW1B95 and MPWB1K) techniques. The enthalpies of the C-N bond dissociation and isomerization of these nitroalkanes were also calculated. The calculated values of the formation and reaction enthalpies were compared with the experimental data when these data were available. It was found that only the G3 procedure gave accurate (within 1 kcal/mol) results for the formation enthalpy of nitroalkanes, their isomers, and radical products. The G3 procedure and two new hybrid meta DFT methods proposed by Truhlar's group (Zhao, Y.; Truhlar, D. J. Phys. Chem. A 2004, 108, 6908) showed good results for the reaction enthalpies of the nitromethane isomerization and the C-N bond dissociation. Our calculation results were used to analyze thermodynamics of the dissociation and isomerization reactions of the poly nitro-substituted methanes.     

Calorimetric and computational study of 3-buten-1-ol and 3-butyn-1-ol. Estimation of the enthalpies of formation of 1-alkenols and 1-alkynols

The enthalpies of combustion and vaporization of 3-buten-1-ol and 3-butyn-1-ol have been measured by static bomb combustion calorimetry and correlation gas chromatography techniques, respectively, and the gas-phase enthalpies of formation, Delta(f)H degrees (m)(g), have been determined, the values being -147.3 +/- 1.8 and 16.7 +/- 1.6 kJ mol(-1), for 3-buten-1-ol and 3-butyn-1-ol, respectively. High level calculations at the G2 and G3 levels have also been carried out. Relationships between the enthalpies of formation of 1-alkanols, 1-alkenols and 1-alkynols and with the corresponding hydrocarbons have been discussed. From the calculated contributions to Delta(f)H degrees (m)(g) for the substitutions of CH(3) by CH(2)OH, CH(3)CH(2) by CH(2)=CH and CH(3)CH(2) by CH triple bond C, we have estimated the Delta(f)H degrees (m)(g) values for 3-buten-1-ol and 3-butyn-1-ol, in excellent agreement with the experimental ones. Delta(f)H degrees (m)(g) values for 1-alkenols and 1-alkynols up to 10 carbon atoms have also been estimated.     

Thermochemical Study of the Cyanophenol Isomers

The standard (p° = 0.1MPa) molar enthalpies of formation for 2-, 3- and 4-cyanophenol in the gaseous phase were derived from the standard molar enthalpies of combustion in oxygen at T = 298.15 K, measured by static bomb combustion calorimetry, and the standard molar enthalpies of sublimation at 298.15 K, measured by Calvet microcalorimetry: 2-cyanophenol, (32.8 ± 2.1) kJ-mol^–1; 3-cyanophenol, (37.8 ± 2.2) kJ-mol^–1; 4-cyanophenol, (35.1 ± 2.5)-kJ-mol^–1. Ab initio geometry optimizations of the three cyanophenols and respective phenoxyl radicals and phenoxide anions were performed using the 6-31G* basis sets. Single-point MP2 and DFT energy calculations allowed the estimation of the enthalpies of formation in the gaseous phase, the O—H bond dissociation energies, and the gas-phase acidities of the three cyanophenols. The theoretical results are generally in good agreement with the experimental findings.     

Bond energies and the enthalpies of formation of mono- and polyradicals in nitroalkanes 2. Nitro derivatives of ethane and propane

Based on the experimental results and the published data, the enthalpies of formation of ethane and propane nitro derivatives were obtained for both the standard state and gas phase. The bond dissociation energies of the ethane and propane nitro derivatives were calculated using the enthalpies of atomization and the energies of nonvalent interactions of nitro groups. The calculated values were compared with the kinetic data on thermal decomposition. The bond dissociation energies in radicals of the ethane and propane nitro derivatives were also calculated using the enthalpies of atomization and the energies of nonvalent interactions of nitro groups. Regularities of changes in the bond dissociation energies of the ethane and propane nitro derivatives and their radicals were established.     

Experimental and computational study of the thermochemistry of the fluoromethylaniline isomers

The standard (po = 0.1 MPa) molar enthalpies of formation in the condensed phase of seven isomers of fluoromethylaniline were derived from the standard molar energies of combustion, in oxygen, to yield CO2(g), N2(g) and HF.10H2O(l), at T = 298.15 K, measured by rotating bomb combustion calorimetry. The standard molar enthalpies of vaporization or sublimation of these compounds, also at T = 298.15 K, were determined using Calvet microcalorimetry, while the enthalpies of fusion of the solid compounds were determined by differential scanning calorimetry. The standard molar enthalpies of formation in the gaseous phase, at T = 298.15 K, were derived from the former two experimental quantities. G3MP2//B3LYP calculations were performed for all possible fluoromethylanilines allowing the estimation of data for the isomers that were not studied experimentally. The Cox scheme was applied with two different approaches for the estimation of the standard molar enthalpies of formation of all the isomers studied, and this led to the conclusion that the literature values for the enthalpies of formation of the meta and para isomers of methylaniline seem to be not reliable. Further G3MP2//B3LYPs calculations on the methylaniline isomers yielded new values for the standard molar enthalpies of formation of the isomers of methylaniline, which have been tested under the Cox scheme, resulting in better estimates.     

Calorimetric and computational study of indanones

Condensed phase standard (p degrees = 0.1 MPa) molar enthalpies of formation for 1-indanone, 2-indanone, and 1,3-indandione were derived from the standard molar enthalpies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The standard molar enthalpies of sublimation for 1-indanone and 2-indanone, at T = 298.15 K, were measured both by correlation-gas chromatography and by Calvet microcalorimetry leading to a mean value for each compound. For 1,3-indandione, the standard molar enthalpy of sublimation was derived from the vapor pressure dependence on temperature. The following enthalpies of formation in gas phase, at T = 298.15 K, were then derived: 1-indanone, -64.0 +/- 3.8 kJ mol(-1); 2-indanone, -56.6 +/- 4.8 kJ mol(-1); 1,3-indandione, -165.0 +/- 2.6 kJ mol(-1). The vaporization and fusion enthalpies of the indanones studied are also reported. In addition, theoretical calculations using the density functional theory with the B3LYP and MPW1B95 energy functionals and the 6-311G** and cc-pVTZ basis sets have been performed for these molecules and the corresponding one-ring species to obtain the most stable geometries and to access their energetic stabilities.     

Validation of the M-C/H-C bond enthalpy relationship through application of density functional theory

Density functional theory has been used to calculate H-C and M-C bond dissociation enthalpies in order to evaluate the feasibility of correlating relative M-C bond enthalpies Delta H(M-C)rel with H-C bond enthalpies Delta H(H-C) via computational methods. This approach has been tested against two experimental correlations: a study of (a) Rh(H)(R)(Tp')(CNCH2CMe3) [R = hydrocarbyl, Tp' = HB(3,5-dimethylpyrazolyl)3] (Wick, D. D.; Jones, W. D. Organometallics 1999, 18, 495) and (b) Ti(R)(silox)2(NHSit-Bu3) (silox = OSit-Bu3) (Bennett, J. L.; Wolczanski, P. T. J. Am. Chem. Soc. 1997, 119, 10696). We show that the observation that M-C bond enthalpies increase more rapidly with different substituents than H-C bond enthalpies is reproduced by theory. Quantitative slopes of the correlation lines are reproduced within 4% of the experimental values with a B3PW91 functional and with very similar correlation coefficients. Absolute bond enthalpies are reproduced within 6% for H-C bonds, and relative bond enthalpies for M-C bonds are reproduced within 30 kJ mol(-1) for Rh-C bonds and within 19 kJ mol(-1) for Ti-C bonds. Values are also calculated with the BP86 functional.     

Molecular energetics of alkyl substituted pyridine <Emphasis Type="Italic">N</Emphasis>-oxides

The standard (p° = 0.1 MPa) energies of combustion in oxygen, at T = 298.15 K, for the solid compounds 2-methylpyridine-N-oxide (2-MePyNO), 3-methylpyridine-N-oxide (3-MePyNO) and 3,5-dimethylpyridine-N-oxide (3,5-DMePyNO) were measured by static-bomb calorimetry, from which the respective standard molar enthalpies of formation in the condensed phase were derived. The standard molar enthalpies of sublimation, at the same temperature, were measured by Calvet microcalorimetry. From the standard molar enthalpy of formation in gaseous phase, the molar dissociation enthalpies of the N–O bonds were derived, and compared with values of the dissociation enthalpies of other N–O bonds available for other pyridine-N-oxide derivatives.     

Thermochemical study of three dimethylpyrazine derivatives

The standard (p ⁰=0.1 MPa) molar enthalpies of formation, in the gaseous phase, at T-298.15 K, for 2,5-dimethylpyrazine (2,5-DMePz) and for the two dimethylpyrazine-N,N′-dioxide derivatives, 2,3-dimethylpyrazine-1,4-dioxide (2,3-DMePzDO) and 2,5-dimethylpyrazine-1,4-dioxide (2,5-DMePzDO), were derived from the measurements of standard massic energies of combustion, using a static bomb calorimeter, and from the standard molar enthalpies of vaporization or sublimation, measured by Calvet microcalorimetry. The mean values for the molar dissociation enthalpy of the nitrogen-oxygen bonds, 〈DH _m⁰〉(N-O), were derived for both N,N′-dioxide compounds. These values are discussed in terms of the molecular structure of the two N,N′-dioxide derivatives and compared with 〈DH _m⁰〉(N-O) values previously obtained for other N-oxide derivatives.     

Bonding situation and N-O-bond strengths in amine-N-oxides--a combined experimental and theoretical study

The bonding situation and energetics of the N-O bond in a series of amine-N-oxides, Ph(x)(CH(3))(3-x)N-O, where x = 0-3, were analyzed experimentally and theoretically. There is a notable nearly linear decrease of the N-O bond dissociation energies (BDEs) for this series with an increasing number of phenyl groups x. This was investigated experimentally by X-ray high angle multipole refinement techniques in combination with subsequent topological analysis of the electron density for the representative (CH(3))(2)PhN-O, 2, and complementary theoretical calculations at the DFT and multireference CASSCF and MR-perturbation theory (MCQDPT2) levels. Both the theoretical and experimental results unambiguously revealed a polar covalent σ-bond for the N-O bond with an essentially identical bonding situation for all amine-N-oxides studied. This apparent disparity between the bonding situation and the trend of BDEs is attributed to the large differences of the relaxation energies of the corresponding amines Ph(x)(CH(3))(3-x)N, (x = 0-3), respectively, the required preparation energies (ΔE(prep)) for the reverse N-O bond forming process. The detailed theoretical analysis of the amines allowed us to trace the trend of larger values of ΔE(prep) for a higher number of phenyl groups x to an increase of n(N) → π*(C-C) delocalization interactions.     

Enthalpies of formation, bond dissociation energies, and molecular structures of the n-aldehydes (acetaldehyde, propanal, butanal, pentanal, hexanal, and heptanal) and their radicals

Aldehydes are important intermediates and products in a variety of combustion and gas-phase oxidation processes, such as in low-temperature combustion, in the atmosphere, and in interstellar media. Despite their importance, the enthalpies of formation and bond dissociation energies (BDEs) for the aldehydes are not accurately known. We have determined enthalpies of formation for acetaldehyde, propanal, and butanal from thermodynamic cycles, using experimentally measured reaction and formation enthalpies. All enthalpy values used for reference molecules and reactions were first verified to be accurate to within around 1 kcal mol-1 using high-level ab initio calculations. Enthalpies of formation were found to be -39.72 +/- 0.16 kcal mol-1 for acetaldehyde, -45.18 +/- 1.1 kcal mol-1 for propanal, and -49.27 +/- 0.16 kcal mol-1 for butanal. Enthalpies of formation for these three aldehydes, as well as for pentanal, hexanal, and heptanal, were calculated using the G3, G3B3, and CBS-APNO theoretical methods, in conjunction with bond-isodesmic work reactions. On the basis of the results of our thermodynamic cycles, theoretical calculations using isodesmic work reactions, and existing experimental measurements, we suggest that the best available formation enthalpies for the aldehydes acetaldehyde, propanal, butanal, pentanal, hexanal, and heptanal are -39.72, -45.18, -50.0, -54.61, -59.37, and -64.2 kcal mol-1, respectively. Our calculations also identify that the literature enthalpy of formation of crotonaldehyde is in error by as much as 1 kcal mol-1, and we suggest a value of -25.1 kcal mol-1, which we calculate using isodesmic work reactions. Bond energies for each of the bonds in the aldehydes up to pentanal were calculated at the CBS-APNO level. Analysis of the BDEs reveals the R-CH(2)CH=O to be the weakest bond in all aldehydes larger than acetaldehyde, due to formation of the resonantly stabilized vinoxy radical (vinyloxy radical/formyl methyl radical). It is proposed that the vinoxy radical as well as the more commonly considered formyl and acetyl radicals are important products of aldehyde combustion and oxidation, and the reaction pathways of the vinoxy, formyl, and acetyl radicals are discussed. Group additivity values for the carbon-oxygen-hydrogen groups common to the aldehydes are also determined. Internal rotor profiles and electrostatic potential surfaces are used to study the dipole induced dipole-dipole interaction in the synperiplanar conformation of propanal. It is proposed that the loss of this dipole-dipole interaction in RC(.-)HCH(2)CH=O radicals causes a ca. 1-2 kcal mol-1 decrease in the aldehyde C-H and C-C bond energies corresponding to RC(.-)HCH(2)CH=O radical formation.     

Experimental and computational bridgehead C-H bond dissociation enthalpies

Bridgehead C-H bond dissociation enthalpies of 105.7 ± 2.0, 102.9 ± 1.7, and 102.4 ± 1.9 kcal mol(-1) for bicyclo[2.2.1]heptane, bicyclo[2.2.2]octane, and adamantane, respectively, were determined in the gas phase by making use of a thermodynamic cycle (i.e., BDE(R-H) = ΔH°(acid)(H-X) - IE(H(·)) + EA(X(·))). These results are in good accord with high-level G3 theory calculations, and the experimental values along with G3 predictions for bicyclo[1.1.1]pentane, bicyclo[2.1.1]hexane, bicyclo[3.1.1]heptane, and bicyclo[4.2.1]nonane were found to correlate with the flexibility of the ring system. Rare examples of alkyl anions in the gas phase are also provided.