UV‐induced transformations of matrix‐isolated 1,3,4‐thiadiazole‐2‐thiones

Monomers of 5‐mercapto‐1,3,4‐thiadiazole‐2‐thione (bismuthiol) were studied using an experimental matrix‐isolation technique as well as by carrying out theoretical quantum chemical calculations. The calculations, performed using the quadratic configuration interaction method with single and double excitations (QCISD)/6‐31++G(d,p)//DFT(B3LYP)/6‐311++G(2d,p), predict that the thione–thiol tautomer of bismuthiol should be significantly (by more than 19 kJ mol^?1) more stable than other tautomeric forms. Accordingly, only the signatures of the thione–thiol tautomer were observed in the FT‐IR spectrum of bismuthiol, recorded directly after deposition of an Ar matrix. UV (λ > 320 nm) irradiation induced the conversion of the thione–thiol tautomer into the dithiol form. Analogous investigations were carried out for two related compounds: 5‐methyl‐1,3,4‐thiadiazole‐2‐thione and 5‐methylthio‐1,3,4‐thiadiazole‐2‐thione. For these two species, only the thione tautomeric forms were observed after deposition of Ar matrices. These tautomers were predicted (by QCISD calculations) to be more stable (by at least 19 kJ mol^?1) than other tautomeric forms. Upon UV irradiation, the most stable thione forms of these compounds were transformed into the corresponding thiol tautomers. Direct observation of the thione → thiol phototautomeric processes provides a clear proof that intramolecular proton transfer reaction can occur in molecules, such as bismuthiol, in spite of the increased NH···S distance, in comparison to other phototautomerizing species studied so far. All the isomers of the studied compounds (substrates and products of the photoreactions) were identified by comparison of their IR spectra with the spectra calculated at the DFT(B3LYP)/6‐311++G(2d,p) level of theory for possible isomeric structures. Copyright © 2009 John Wiley & Sons, Ltd.     

Formation of pyrazol‐1,3,4‐thiadiazoles through 1,3‐dipolar cycloadditions of 3‐thioxo‐[1,2,4]‐triazepin‐5‐one with nitrilimines: an experimental and computational study

In this work the experimental results and the computational study of the title compounds and some ancillary compounds are reported. Two bicyclic pyrazol‐1,3,4‐thiadiazole derivatives were synthezised by reaction between 6‐dimethylaminomethylene‐3‐thioxo‐[1,2,4]‐triazepin‐5‐one 1 and several nitrilimines 2a–f to give corresponding spirocycloadducts 3a–f , which undergo a rapid rearrangement leading to the new bicyclic compounds, 4a–f and 5a–f . These obtained bicyclic products were characterized by ¹H and ¹³C NMR spectroscopy and finally by X‐ray crystallography. Theoretical calculations have been carried out using DFT methods to rationalize the formation of the two new bicyclic compounds. Two reaction types are involved in the formation of the compounds 4a–f and 5a–f . The first one is a 1,3‐dipolar cycloaddition (13DC) reaction between 1 acting as dipolarophile and 2a–f as dipoles. The results indicate that the cycloaddition between 1 and 2g , as model of 2a–c , takes place via a high asynchronous bond‐formation process. The regioselectivity obtained from the calculations is in complete agreement with the formation of the unique spirocycloadducts 3a–f . The second reaction leading to the formation of the final products is a domino process that is initiated by the quick and irreversible cleavage in a catalytic acid environment of triazepenic ring. Copyright © 2008 John Wiley & Sons, Ltd.     

Theoretical studies on the electronic and optical properties of arene‐ versus fluoroarene‐thiophene co‐oligomer

A series of regiochemically varied and core size extension‐modulated arene‐ and fluoroarene‐thiophene co‐oligomers and the unsubstituted sexithiophene α6T were investigated theoretically to explore their electronic and optical properties. These phenylene‐thiophene oligomers show great potential for application in organic light‐emitting diodes (OLEDs), organic diode lasers, and organic thin‐film transistors (OTFTs) because of their feasible tuning of optical and electronic properties by the various structural tunings. Density functional theory (DFT) and the ab initio HF were employed to investigate the geometric and electronic structures of the oligomers in the ground state, and the singles configuration interaction (CIS) methods were used to study the lowest singlet excited state. The lowest excitation energies (E_gs), the radiative lifetime τ, and the maximal absorption/emission wavelength of the oligomers were studied within time‐dependent DFT (TDDFT). All calculations were performed using the 6‐31G(d) basis set. The results show that the HOMOs, LUMOs, energy gaps, ionization potentials (IPs), electron affinities (EAs), and reorganization energies are significantly affected by the various structural tunings in these co‐oligomers, which is important for the improvement of the hole and electron injection into OLEDs. Interestingly, the LUMO energy of 1b , 2b , and 3b is lower than that of α6T and 1a , 2a , 3a by about 0.12 ～ 0.47 eV, indicating that the fluorophenyl‐substitution has significantly improved the electron injection properties of the oligomers. Copyright © 2008 John Wiley & Sons, Ltd.     

Theoretical studies on 2‐(5‐amino‐3‐nitro‐1,2,4‐triazolyl)‐3,5‐dinitropyridine (PRAN) and its derivatives

In this work, a set of derivatives of 2‐(5‐amino‐3‐nitro‐1,2,4‐triazolyl)‐3,5‐dinitropyridine (PRAN) with different energetic substituents (?N₃, –NO₂, –NH₂, –NF₂) have been studied at the Becke, three‐parameter, Lee–Yang–Parr/aug‐cc‐pvdz, Becke, three‐parameter, Lee–Yang–Parr/6‐31G(d), Becke, three‐parameter, Perdew 86/6‐31G(d), and Becke three‐parameter, Perdew–Wang 91/6‐31G(d,p) levels of density functional theory. The gas‐phase heats of formation were predicted with isodesmic reactions and the condensed‐phase HOFs were estimated with the Politzer approach. The effects of different functionals and basis sets were analyzed. –N₃ and –NO₂ greatly increase while –NH₂ and –NF₂ slightly decrease heats of formation. An analysis of the bond dissociation energies and impact sensitivity shows that all compounds have good stability. The crystal densities (1.82–2.00 g/cm³) computed from molecular packing calculations are big for all compounds and that of the –NF₂ derivative is the largest. All derivatives have higher detonation velocity and detonation pressure than PRAN. Compounds 3 and 4 (R = NO₂ and NF₂) have better performance than hexahydro‐1,3,5‐trinitro‐1,3,5‐trizine and the performance of 4 is quite close to that of 1,3,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane, they are promising candidates of high energy compounds and worth further investigations. Copyright © 2012 John Wiley & Sons, Ltd.     

Conformational analysis of 4,4‐dimethyl‐1‐(trifluoromethylsulfonyl)‐1,4‐azasilinane and 2,2,6,6‐tetramethyl‐4‐(trifluoromethylsulfonyl)‐1,4,2,6‐oxazadisilinane

4,4‐Dimethyl‐1‐(trifluoromethylsulfonyl)‐1,4‐azasilinane 1 and 2,2,6,6‐tetramethyl‐4‐(trifluoromethylsulfonyl)‐1,4,2,6‐oxazadisilinane 2 were studied by variable temperature dynamic ¹H, ¹³C, ¹⁹F NMR spectroscopy and theoretical calculations at the DFT (density functional theory) and MP2 (Møller‐Plesset 2) levels of theory. Both kinetic (barriers to ring inversion) and thermodynamic data (frozen conformational equilibria) could be obtained for the two compounds. The computations revealed two minima on the potential energy surface for molecules 1 and 2 corresponding to the rotamers with the CF₃SO₂ group directed ‘inward’ and ‘outward’ the ring, the latter being 0.2–0.4 kcal/mol (for 1 ) and 1.1 kcal/mol (for 2 ) more stable than the former. The vibrational calculations at the DFT and MP2 levels of theory give the values of the free energy difference ΔG^o for the ‘inward’ ‘outward’ equilibrium consistent with those determined from the experimentally measured ratio of the rotamers. The structure of crystalline compound 2 was ascertained by X‐ray diffraction analysis. Copyright © 2011 John Wiley & Sons, Ltd.     

Structure and properties of α‐cyclo[N]thiophenes as potential electronic materials – a theoretical study

Density functional theory (DFT) calculations of ring‐shaped α‐cyclo[N]thiophenes with N = 2 to N = 18 have been performed for ideal structures of high symmetry (point groups C_nv and D_nh) and for optimum energy structures of lower symmetry (D_2d, C_s, C_2v, C_i or C₁). Whereas the first three members of the series behave exceptionally the higher members are typical cyclothiophenes consisting of weakly interacting thiophene rings. In contrast to neutral compounds, cations and dications of cyclothiophenes with N ≥5 exhibit pronounced electron delocalizations along the carbon backbone. However, if the functional B3LYP is replaced by BH cations of large ring‐size cations show polaron‐type charge defects. According to broken symmetry DFT calculations dications with N = 14 and N = 18 have biradical character. These structures correspond to two‐polaron‐type structures rather than to dipolarons. The calculated vertical ionization energies of cyclo[N]thiophene are comparable with those of oligo[N]thiophenes of the same number of thiophene rings but the calculated absolute energies are probably too low at large ring size. Cyclothiophenes absorb light of lower energies than the related oligothiophenes. Cyclothiophenes belong to the strongly absorbing organic chromophores. In case of high molecular symmetry some of the excited states of cyclothiophenes are degenerate. The degeneracy is lifted with lower symmetries but the general absorption feature remains. The theoretical results are discussed with respect to recent experimental findings. Copyright © 2007 John Wiley & Sons, Ltd.     

Unusual conformational preferences of 1,3‐dimethyl‐3‐isopropoxy‐3‐silapiperidine

The conformational analysis of the first representative of the Si‐alkoxy substituted six‐membered Si,N‐heterocycles, 1,3‐dimethyl‐3‐isopropoxy‐3‐silapiperidine, was performed by low‐temperature ¹H and ¹³C NMR spectroscopy and DFT theoretical calculations. In contrast to the expectations from the conformational energies of methyl and alkoxy substituents, the Me_axi‐PrO_eq conformer was found to predominate in the conformational equilibrium in the ratio Me_axi‐PrO_eq : Me_eqi‐PrO_ax of ca. 2 : 1 as from the ¹H and ¹³C NMR study. The thermodynamic parameters obtained by the complete line shape analysis showed that the main contribution to the barrier to ring inversion originates from the entropy term of the free energy of activation. Copyright © 2012 John Wiley & Sons, Ltd.     

Theoretical investigation on the excited‐state intramolecular proton transfer mechanism of 2‐(2′‐benzofuryl)‐3‐hydroxychromone

Spectroscopic studies on excited‐state proton transfer of a new chromophore 2‐(2′‐benzofuryl)‐3‐hydroxychromone (BFHC) have been reported recently. In the present work, based on the time‐dependent density functional theory (TD‐DFT), the excited‐state intramolecular proton transfer (ESIPT) of BFHC is investigated theoretically. The calculated primary bond lengths and angles involved in hydrogen bond demonstrate that the intramolecular hydrogen bond is strengthened. In addition, the phenomenon of hydrogen bond reinforce has also been testified based on infrared (IR) vibrational spectra as well as the calculated hydrogen bonding energies. Further, hydrogen bonding strengthening manifests the tendency of excited state proton transfer. Our calculated results reproduced absorbance and fluorescence emission spectra of experiment, which verifies that the TD‐DFT theory we used is reasonable and effective. The calculated Frontier Molecular Orbitals (MOs) further demonstrate that the excited state proton transfer is likely to occur. According to the calculated results of potential energy curves along O―H coordinate, the potential energy barrier of about 14.5 kcal/mol is discovered in the S₀ state. However, a lower potential energy barrier of 5.4 kcal/mol is found in the S₁ state, which demonstrates that the proton transfer process is more likely to happen in the S₁ state than the S₀ state. In other words, the proton transfer reaction can be facilitated based on the photo‐excitation effectively. Moreover, the phenomenon of fluorescence quenching could be explained based on the ESIPT mechanism. Copyright © 2015 John Wiley & Sons, Ltd.     

5‐Phenyl‐1,3,4‐oxadiazole‐2‐thiol/polyamide‐montmorillonite microbicides nanocomposites as drug delivery system

The preparation and structural characterization of polymeric microbicides consisting of 5‐phenyl‐1,3,4‐oxadiazole‐2‐thiol covalently bound to polyamide based on diethyl‐2,3‐dihydroxysuccinate and polyoxypropylenetriamine Jeffamine (T₄₀₃) are described. Two different mole ratios of 5‐phenyl‐1,3,4‐oxadiazole‐2‐thiol was reacted with chloroacetylated diethyl‐2,3‐dihydroxysuccinate followed by polycondensation with Jeffamine (T₄₀₃). The nanocomposites were prepared by modification of microbicide polyamides to yield polymers with phosphonium salt or amine hydrochloride salt followed by ion exchange process between the phosphonium salt or amine hydrochloride of the polyamides and the intermellar sodium cation of the clay mineral montmorillonite. The monomers were characterized by mass spectrum, proton nuclear magnetic resonance. The polymers showed good or moderate antimicrobial activities. Nanocomposites were characterized by Fourier transformed infrared spectroscopy, X‐ray diffraction, thermal gravimetric analysis, and transmission electron microscope. The swelling behavior and release of 5‐phenyl‐1,3,4‐oxadiazole‐2‐thiol in different pH values (2.3, 5.8, and 7.4) were studied. A slow release, ranging from 12% to 28% after 50 hours was recorded from nanocomposites. However, the release profile reached almost 70% from polyamides. The antimicrobial activity of the polyamides was studied against gram‐negative bacteria, gram‐positive bacteria, yeast, and the filamentous fungi by well diffusion method. The polyamides showed better antimicrobial activities than 5‐phenyl‐1,3,4‐oxadiazole‐2‐thiol.     

Kinetics and mechanism for the oxidation of anilines by ClO2: a combined experimental and computational study

The oxidation of para‐substituted anilines (X–C₆H₄NH₂, X = –CH₃, –H, –Cl, –NO₂) with chlorine dioxide was studied as a means of eliminating these pollutants. The oxidation rate decreases from that for 4‐methylaniline to that for 4‐nitroanilinem in agreement with the Hammett plot; the oxidation kinetics is second order in aniline and first order in ClO₂, for which a possible mechanism is proposed. Liquid chromatography and gas chromatography mass spectrometry results show that benzoquinone is formed as the major intermediate in aniline/ClO₂ oxidation, and the reaction is pH‐dependent as the rate constant increases with increasing pH. To further support our proposed mechanism, Density Functional Theory (DFT) computations at both B3LYP/6‐311 + G(d,p) level with the polarizable continuum model with an integral equation formalism solvation model (i.e., with water) were carried out, showing that activation energy barriers predict the same reactivity trend as shown by the kinetics experiments. Copyright © 2014 John Wiley & Sons, Ltd.     

Composition dependent self‐regenerative property of perovskite‐type oxides

The self‐regenerative property of LaCo_{1–x –y}Pd_x Zn_y O_3±δ and LaFe_{1–x –y}Pd_x Zn_y O_3±δ solid solutions with monometallic Pd or bimetallic Pd/Zn substituents for Co or Fe is studied under a redox cycle by high angular annular dark‐field scanning transmission electron microscopy (STEM‐HAADF) and energy dispersive X‐ray spectroscopy (EDX) and X‐ray diffraction (XRD). These results reveal that the composition of perovskites determines the self‐regenerative property that occurs largely in LaCo_{1–x –y}Pd_x Zn_y O_3±δ but is limited greatly in LaFe_{1–x –y}Pd_x Zn_y O_3±δ. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Theoretical investigations on 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole derivatives as potential nitrogen‐rich high energy materials

The ―NH₂, ―NO₂, ―NHNO₂, ―C(NO₂)₃ and ―CF(NO₂)₂ substitution derivatives of 4,4′,5,5′‐tetranitro‐2,2′‐1H,1′H‐2,2′‐biimidazole were studied at B3LYP/aug‐cc‐pVDZ level of density functional theory. The crystal structures were obtained by molecular mechanics (MM) methods. Detonation properties were evaluated using Kamlet–Jacobs equations based on the calculated density and heat of formation. The thermal stability of the title compounds was investigated via the energy gaps (?E_{LUMO ? HOMO}) predicted. Results show that molecules T5 (D = 10.85 km·s^?1, P = 57.94 GPa) and T6 (D = 9.22 km·s^?1, P = 39.21 GPa) with zero or positive oxygen balance are excellent candidates for high energy density oxidizers (HEDOs). All of them appear to be potential explosives compared with the famous ones, octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetraazocane (HMX, D = 8.96 km·s^?1, P = 35.96 GPa) and hexanitrohexaazaisowurtzitane (CL‐20, D = 9.38 km·s^?1, P = 42.00 GPa). In addition, bond dissociation energy calculation indicates that T5 and T6 are also the most thermally stable ones among the title compounds. Copyright © 2014 John Wiley & Sons, Ltd.     

Conformational flexibility of xanthene‐based covalently linked dimers

The conformational flexibility of three covalently linked dimers consisting of two xanthene‐based moieties connected by a diphenyl ether linker was studied using NMR spectroscopy, X‐ray crystallography, and density functional theory (DFT) calculations. The three dimers interconvert as a function of pH: the doubly cationic dimer (Xan⁺)₂ exists in acidic solutions (pH < 0.5), the mono‐alcohol monocation Xan⁺–Xan‐OH at intermediate pH values (pH = 1–3), and the neutral diol at the highest pH‐values (pH > 3). Each dimer exhibits conformational degrees of freedom associated with rotations of either the xanthene moiety or of the diphenyl ether (DPE) linker. The barriers for rotation of the xanthylium moiety were evaluated using DFT calculations, yielding values of 23 kcal/mol for (Xan⁺)₂ and 11 kcal/mol for (Xan‐OH)₂, respectively. The rotational barrier for the diphenyl ether linker in Xan⁺–Xan‐OH (15 kcal/mol) was experimentally determined using variable temperature NMR measurements. The relative orientation of the two –OH groups in (Xan‐OH)₂ diol was investigated in solution and the solid state using NMR spectroscopy and X‐ray crystallography. The conformer observed in the solid state was found to be the In–Out conformer, while free rotation of the xanthenol units is thought to occur on the NMR timescale at room temperature. These studies are relevant for the design of linkers for efficient water oxidation catalysts. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of irradiation on ethyl 2‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carboxylate: an ESR study

Ethyl 2‐amino‐4,5,6,7‐tetrahydrobenzo[b]thiophene‐3‐carboxylate [C₁₁H₁₅NO₂S] was synthesized by the Gewald method. Its single crystals were grown from an alcohol/ethyl acetate solution at 15 °C and characterized using IR and ¹H‐NMR. These single crystals were irradiated for 72 h at 298 K by a ⁶⁰Co gamma source with a dose speed of 0.864 kGy/h. After irradiation, electron spin resonance (ESR) measurements were carried out to study radiation‐induced radicals in the temperature range from 120 to 450 K. Additionally, for the single crystal, ESR angular dependencies were measured in the xy, xz and yz planes of the substance. This irradiated single crystal was analyzed based on the ESR spectra. Analysis of the spectra revealed that the radical was formed by a C–H bond fission at the carbon end of the substance. It was also observed that the color of the sample changed after irradiation. The hyperfine and g parameters were determined from the experimental spectra. It was inferred from these results that the hyperfine parameters and g value exhibited anisotropic behavior. The average values of these parameters were calculated as follows: g = 2.0088, A_H1=H2 = 20.70 G, A_H3=H4 = 10.80 G, A_Ha = 4.59 G, A_Hb = 3.24 G and, A_N = 6.10 G. Copyright © 2011 John Wiley & Sons, Ltd.     

Understanding halogen‐substituent assistance in H‐atom abstraction‐based reactions of CHCl•− with CH4 − nXn (X = H,F, Cl; n = 0–3)

The effect of halogen‐substituent on hydrogen abstraction mechanisms was studied by applying density functional theory functional calculations to the gas‐phase reactions between CHCl^?? and CH_{4 ? n}X_n (X = H, F, Cl; n = 0–3), and it is found that a heavier X substituent in the substrate results in a greater stabilization of corresponding complex, a lower activation energy, a faster H‐abstraction reaction, and greater exothermicity. However, CH₄– reaction is more reactive than CH₃F– reaction under the same condition because of dominant π‐donation from the electronegative F atom. We also explored the reactivity difference for the seven reactions in terms of factors derived from bond order, second‐order perturbative energy, and activation strain model analysis. The rate constants are evaluated over a wide temperature range of 298–1000 K by the conventional transition state theory. Copyright © 2014 John Wiley & Sons, Ltd.     

Calculated polar substituent effects on the stability of 3‐substituted(X) bicyclo[1.1.1]pent‐1‐yl cations and 4‐substituted(X) bicyclo[2.2.1]hept‐1‐yl cations: a DFT study

The effects of substituents on the stability of 3‐substituted(X) bicyclo[1.1.1]pent‐1‐yl cations (3) and 4‐substituted(X) bicyclo[2.2.1]hept‐1‐yl cations (4), for a set of substituents (X = H, NO₂, CN, NC, CF₃, CHO, COOH , F, Cl, HO, NH₂, CH₃, SiH₃, Si(CH₃)₃, Li, O^?, and NH₃⁺) covering a wide range of electronic substituent effects were calculated using the DFT theoretical model at the B3LYP/6‐311 + G(2d,p) and B3LYP/6‐31 + G (d) levels of theory, respectively. Linear regression analysis was employed to explore the relationship between the calculated relative hydride affinities (ΔE, kcal/mol) of the appropriate isodesmic reactions for 3/4 and polar field/group electronegativity substituent constants (σ_F and σ_χ, respectively). The analysis reveals that the ΔE values for both systems are best described by a combination of both substituent constants. The result highlights the importance of the σ_χ dependency of charge delocalization in these systems. Copyright © 2012 John Wiley & Sons, Ltd.     

Enols of 2‐nitro‐ and related 2‐substituted malonamides

The structures of 2‐substituted malonamides, YCH(CONR¹R²)CONR³R⁴ (Y = Br, SO₂Me, CONH₂, COMe, and NO₂) were investigated. When Y = Br, R¹R² = R³R⁴ = HEt; Y = SO₂Me, R¹–R⁴ = H and for Y = CONH₂ or CONHPh, R¹–R⁴ = Me, the structure in solution is that of the amide tautomer. X‐ray crystallography shows solid‐state amide structures for Y = SO₂Me or CONH₂, R¹–R⁴ = H. Nitromalonamide displays an enol structure in the solid state with a strong hydrogen bond (O^…O distance = 2.3730 Å at 100 K) and d(OH) ≠ d(O^…H). An apparently symmetric enol was observed in solution, even in appreciable percentages in highly polar solvents such as DMSO‐d₆, but K_enol values decrease on increasing the solvent polarity. The N,N′‐dimethyl derivative is less enolic. Acetylmalonamides display a mixture of enol on the acetyl group and amide in non‐polar solvents, and only the amide in DMSO‐d₆. DFT calculations gave the following order of pK_enol values for Y: H > CONH₂ > COMe ≥ COMe (on acetyl) ≥ MeSO₂ > CN > NO₂ in the gas phase, CHCl₃, and DMSO. The enol on the C?O group is preferred to the aci‐nitro compound, and the N? O? H^…O?C is less favored than the C?O? H^…O?C hydrogen bond. Copyright © 2009 John Wiley & Sons, Ltd.     

Thermolysis and photolysis of 2‐ethyl‐4‐nitro‐1(2H)‐isoquinolinium hydroperoxide

The thermal and light‐induced O ? O bond breaking of 2‐ethyl‐4‐nitro‐1(2H)‐isoquinolinium hydroperoxide (IQOOH) were studied using ¹H NMR, steady‐state UV/vis spectroscopy, femtosecond UV/vis transient absorption (fs TA) and time‐dependent density functional theory (TD DFT) calculations. Thermal O ? O bond breaking occurs at room temperature to generate water and the corresponding amide. The rate of this reaction, k = 5.4 · 10^?6 s^?1, is higher than the analogous rates of simple alkyl and aryl hydroperoxides; however, the rate significantly decreases in the presence of small amounts of methanol. The calculated structure of the transition state suggests that the thermolysis is facilitated by a 1,2 proton shift. The photochemical process yields the same products, as confirmed using NMR and UV/vis spectroscopy. However, the quantum yield for the photolysis is low (Φ = 0.7%). Fs TA studies provide additional detail of the photochemical process and suggest that the S₁ state of IQOOH undergoes fast internal conversion to the ground state, and this process competes with the excited‐state O ? O bond breaking. This result was supported by the fact that the model compound IQOH exhibits similar excited‐state decay lifetimes as IQOOH, which is assigned to the S₁ → S₀ internal conversion. Copyright © 2013 John Wiley & Sons, Ltd.     

Investigation of cation–anion interaction in 1‐(2‐hydroxyethyl)‐3‐methylimidazolium‐based ion pairs by density functional theory calculations and experiments

Gas‐phase structure, hydrogen bonding, and cation–anion interactions of a series of 1‐(2‐hydroxyethyl)‐3‐methylimidazolium ([HOEMIm]⁺)‐based ionic liquids (hereafter called hydroxyl ILs) with different anions (X = [NTf₂]^–, [PF₆]^–, [ClO₄]^–, [BF₄]^–, [DCA]^–, [NO₃]^–, [AC]^– and [Cl]^–), as well as 1‐ethyl‐3‐methylimizolium ([EMIm]⁺)‐based ionic liquids (hereafter called nonhydroxyl ILs), were investigated by density functional theory calculations and experiments. Electrostatic potential surfaces and optimized structures of isolated ions, and ion pairs of all ILs have been obtained through calculations at the Becke, three‐parameter, Lee–Yang–Parr/6‐31 + G(d,p) level and their hydrogen bonding behavior was further studied by the polarity and Kamlet–Taft Parameters, and ¹H‐NMR analysis. In [EMIm]⁺‐based nonhydroxyl ILs, hydrogen bonding preferred to be formed between anions and C2–H on the imidazolium ring, while in [HOEMIm]⁺‐based hydroxyl ILs, it was replaced by a much stronger one that preferably formed between anions and OH. The O–H···X hydrogen bonding is much more anion‐dependent than the C2–H···X, and it is weakened when the anion is changed from [AC]^– to [NTf₂]^–. The different interaction between [HOEMIm]⁺ and variable anion involving O–H···X hydrogen bonding resulted in significant effect on their bulk phase properties such as ¹H‐NMR shift, polarity and hydrogen‐bond donor ability (acidity, α). Copyright © 2011 John Wiley & Sons, Ltd.     

Conformational analysis of 3‐methyl‐3‐silathiane and 3‐fluoro‐3‐methyl‐3‐silathiane

The conformational equilibria of 3‐methyl‐3‐silathiane 5 , 3‐fluoro‐3‐methyl‐3‐silathiane 6 and 1‐fluoro‐1‐methyl‐1‐silacyclohexane 7 have been studied using low temperature ¹³C NMR spectroscopy and theoretical calculations. The conformer ratio at 103 K was measured to be about 5 _ax: 5 _eq = 15:85, 6 _ax: 6 _eq = 50:50 and 7 _ax: 7 _eq = 25:75. The equatorial preference of the methyl group in 5 (0.35 kcal mol^?1) is much less than in 3‐methylthiane 9 (1.40 kcal mol^?1) but somewhat greater than in 1‐methyl‐1‐silacyclohexane 1 (0.23 kcal mol^?1). Compounds 5–7 have low barriers to ring inversion: 5.65 (ax → eq) and 6.0 (eq → ax) kcal mol^?1 ( 5 ), 4.6 ( 6 ), 5.1 (Me_ax → Me_eq) and 5.4 (Me_eq → Me_ax) kcal mol^?1 ( 7 ). Steric effects cannot explain the observed conformational preferences, like equal population of the two conformers of 6 , or different conformer ratio for 5 and 7 . Actually, by employing the NBO analysis, in particular, considering the second order perturbation energies, vicinal stereoelectronic interactions between the Si–X and adjacent C–H, C–S, and C–C bonds proved responsible. Copyright © 2010 John Wiley & Sons, Ltd.