System constants for the bis(cyanopropylsiloxane)-co-methylsilarylene HP-88 and poly(siloxane) Rtx-440 stationary phases

The solvation parameter model is used to characterize the retention properties of the bis(cyanopropylsiloxane)-co-methylsilarylene, HP-88, and poly(siloxane), Rtx-440, stationary phases over the temperature range 60-140 degrees C. HP-88 is among the most cohesive, dipolar/polarizable and hydrogen-bond basic of stationary phases for open-tubular column gas chromatography. It has no hydrogen-bond acidity or capacity for electron lone pair interactions. It exhibits similar selectivity to the poly(cyanopropylsiloxane) stationary phase SP-2340. Rtx-440 is a low-polarity, low-cohesion stationary phase with a moderate capacity for dipolar/polarizable and hydrogen-bond base interactions. It has no hydrogen-bond acidity and possesses weak electron lone pair interactions. It has unique selectivity when compared against a system constants database for 28 common stationary phase compositions. Cluster analysis indicated that the poly(cyanopropylphenyldimethylsiloxane) stationary phase containing 6% cyanopropylphenylsiloxane monomer, DB-1301, the poly(dimethyldiphenylsiloxane) stationary phase containing 20% diphenylsiloxane monomer, Rtx-20, the poly(siloxane) stationary phase of unknown composition, DB-624, and DX-1 [a mixture of poly(dimethylsiloxane) and poly(ethylene glycol) 9:1] are the closest selectivity matches in the database. The selectivity of DB-1301 and Rtx-440 are very similar for solutes with weak hydrogen-bond acidity allowing one stationary phase to be substituted for the other with likely success. For strong hydrogen-bond acids, such as phenols, DB-1301 and Rtx-440 exhibit different selectivity.     

Chromatographic resolution of dipeptide enantiomers and diastereomers on chiral stationary phases from poly-( -leucine) or poly( -phenylalanine)

Two types of chiral stationary phase, polymer-bonded and non-bonded, containing poly( -leucine) and poly( -phenylalanine) were prepared. These stationary phases gave higher enantioselectivity for the optical resolution of various derivatives of leucylphenylalanine methyl ester by liquid chromatography than did poly( -alanine) and poly( -glutamate).     

Adjusting the chromatographic properties of poly(ionic liquid)‐modified stationary phases by substitution on the imidazolium cation

Poly(ionic liquid)‐modified stationary phases can have multiple interactions with solutes. However, in most stationary phases, separation selectivity is adjusted by changing the poly(ionic liquid) anions. In this work, two poly(ionic liquid)‐modified silica stationary phases were prepared by introducing the cyano or tetrazolyl group on the pendant imidazolium cation on the polymer chains. Various analytes were selected to investigate their mechanism of retention in the stationary phases using different mobile phases. Two poly(ionic liquid)‐modified stationary phases can provide various interactions toward solutes. Compared to the cyano‐functionalized poly(ionic liquid) stationary phase, the tetrazolyl‐functionalized poly(ionic liquid) stationary phase provides additional cation‐exchange and π‐π interactions, resulting in different separation selectivity toward analytes. Finally, applicability of the developed stationary phases was demonstrated by the efficient separation of nonsteroidal anti‐inflammatory drugs.     

Chromatographic properties and polarity evaluation of poly(1-trimethylsilyl-1-propyne) and poly(1-phenyl-1-propyne)

The chromatographic properties of poly(1-trimethylsilyl-1-propyne) (PTMSP) and poly(1-phenyl-1-propyne) (PPP) were studied by gas chromatography using packed columns. The selectivity and efficiency of columns packed with PTMSP and PPP were compared to the data obtained for columns with other known adsorbents and stationary phases. The McReynolds and Rohrschneider constants, on the basis of which the polarity of the new phases was evaluated, were calculated. The results of the investigation of chromatographic properties allow PTMSP to be brought in line with the polymeric adsorbents Porapak Q, Porapak QS, and Chromosorb 106, while PPP, with the methyphenylsilicon phases SE-52 and OV-3.     

Chromatographic characteristics of poly(1-vinylimidazole)-grafted silica in normal-phase HPLC

A stationary phase based on poly(1-vinylimidazole)-grafted silica has been prepared by the surface radical chain-transfer reaction. The stationary phase was characterized by infrared spectra, X-ray photoelectron spectroscopy and elemental analysis. Chromatographic characteristics of the stationary phase were investigated in normal-phase HPLC. The results showed that both weak polar compounds (polycyclic aromatic hydrocarbons, dialkyl phthalates) and polar compounds (anilines, phenols) could be successfully separated on this stationary phase, implying better separation performance than blank silica and conventional aminopropyl-bonded silica under the same conditions. The excellent performance can be attributed to multiple interactions between surface modifier and the analytes that might include dipole, hydrogen bonding, H-π, electrostatic and inductive interactions.     

Syntheses and polymerizations of novel chiral poly(acrylamide) macromonomers and their chiral recognition abilities

Chiral poly(acrylamide) macromonomers (PMB‐1, PMB‐2, PPAE‐1, and PPAE‐2) were synthesized from 2‐methacryloyloxyethyl isocyanate and prepolymers, that is, poly[(S)‐methylbenzyl acrylamide] or poly(L ‐phenylalanine ethylester acrylamide with a terminal carboxylic acid or hydroxy group. Radical homopolymerizations of poly(acrylamide) macromonomers were carried out under several conditions to obtain the corresponding optically active polymers. A strong temperature dependence on the specific optical rotation was observed for poly(PPAE‐2) in comparison with that for the corresponding prepolymer. This might have resulted from a change in the conformation caused by hydrogen bonds between polymer‐graft branches in the polymacromonomer. Radical copolymerizations of poly(acrylamide) macromonomers with styrene and methyl methacrylate were performed with azobisisobutyronitrile in tetrahydrofuran at 60 °C. Chiroptical properties of the copolymers were slightly influenced by comonomer units. Chiral stationary phases were prepared by the radical polymerization of poly(acrylamide) macromonomers in the presence of silica gel containing vinyl groups on the surface. Some racemic compounds such as menthol and mandelic acid were resolved on the chiral stationary phases for high‐performance liquid chromatography. The conformation based on hydrogen bonds between polymer‐graft branches in the polymacromonomers may play an important role in chiral discrimination. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1726–1741, 2002     

聚N-异丙基丙烯酰胺硅胶键合固定相的制备与评价

以3-巯丙基三甲氧基硅烷为偶联剂,将聚N-异丙基丙烯酰胺(PNIPAM)键合到硅胶上,制得了键合固定相（SI-PNIPAM）填料,并用元素分析、红外光谱等对其进行了表征。以甲醇-水为二元流动相,用多环芳烃、碱性物质对该固定相进行了色谱评价,并考察了该固定相的适用pH范围及水解稳定性。结果表明:该固定相具有较好的色谱性能与温敏特性,并且在pH 2.5～7.5时稳定性良好。     

Selectivity of some basic solutes on a poly(methyltetradecylsiloxane)-silica stationary phase

Complex analyses of polar compounds, especially basic ones, require more selective stationary phases. The present paper describes a stationary phase prepared by thermal immobilization of poly(methyltetradecylsiloxane) onto chromatographic silica (PMTDS-SiO(2)). This stationary phase presents hydrophobic and ion-exchange interactions that confer both high retention and unique selectivities for basic solutes. The influence of ion-exchange interactions is confirmed by the increase in retention factors of basic solutes when the mobile-phase pH changes from acidic to neutral and by the decrease in retention factors when the mobile-phase pH changes from neutral to alkaline. The ion-exchange properties of the stationary phase are enriched in neutral mobile phase (pH 7-7.5) using soft Lewis bases such as tricine and tris as buffers but are suppressed in both acidic (pH 2.5-6) and highly alkaline mobile phases (pH≤10). Increasing both temperature and flow rate permits more rapid separations while maintaining the selectivity. The stability of the stationary phase is evaluated with acid, neutral and alkaline mobile phases.     

Preparation of poly(fumaric acid) from poly(di-t-butyl fumarate) and poly(di-trimethylsilyl fumarate)

Polymerization conditions of di-t-butyl fumarate and di-trimethylsilyl fumarate were studied in detail. They cannot be polymerized by either anionic or coordination initiators, but radical and radiation polymerizations are successful. Characterization of poly(di-t-butyl fumarate), obtained thereby, with ¹H-NMR spectrum suggests that the backbone of the chain is stiff. From analysis of thermal properties of poly(di-t-butyl fumarate), it is found to be completely converted to poly(fumaric acid) by pyrolysis around 200°C. Poly(di-trimethylsilyl fumarate), on the other hand, can be quantitatively hydrolyzed with acid to the same polyacid, too. The preliminary measurement of the dissociation behaviors of poly(fumaric acid) was done by potentiometric titration, which shows that the titration curves of poly(fumaric acid) are different from those of poly(acrylic acid) and poly(maleic acid).     

Selectivity equivalence of poly(ethylene glycol) stationary phases for gas chromatography

The solvation parameter model is used to study differences in selectivity for poly(ethylene glycol) stationary phases for packed column (Carbowax 20M) and fused-silica, open-tubular column (HP-20M, AT-Wax, HP-INNOWax and DB-FFAP) gas chromatography. All phases are dipolar, strongly hydrogen-bond basic with no hydrogen-bond acidity and of moderate cohesion. No two phases are exactly alike, however, and selectivity differences identified with cavity formation and dispersion interactions, n- and pi-electron pair interactions, dipole-type interactions and hydrogen-bond interactions are quantified by differences in the system constants at a fixed temperature where retention occurs solely by gas-liquid partitioning. The system constants vary linearly with temperature over the range 60-140 degrees C (except for n- and pi-electron pair interactions which are temperature invariant) facilitating a general comparison of the importance of temperature on selectivity differences for compared phases. From a mechanistic point of view it is demonstrated that selectivity differences can result from chemical differences between the poly(ethylene glycol) stationary phases and from differences in the relative contribution of interfacial adsorption to the retention mechanism. The latter depends on both system properties and solute characteristics.     

System constants of synthesized poly(methyl-3,3,3-trifluoropropyl) siloxanes

The method of solvation model has been applied to five poly (methyl-trifluoropropyl) siloxanes (TFPSXX) prepared in our laboratories, at five trifluoropropyl (TFP) group contents, XX = 0, 11.5, 26.3, 35.5 and 50.0%, at 80, 100, 120 and 140 degrees C. Previously, specific retention volumes of 60-odd solutes of varied polarities were measured upon each of these stationary phases within the above temperature range. Constant s prevails over all other constants, TFPSXX stationary phases showing strong dipole/induced dipole forces with the solutes, moderate acidity and no basicity at all. Constant e is zero in the stationary phase without TFP groups, but has negative low-medium values for the other fluorine contents, XX from 11.5 to 50.0%, hinting at repulsive forces, as expected. Normal values for constant l, decreasing from the less cohesive TFPS00 to the more cohesive TFPS50, were found. For each TFP content constants s, a and l show a negative temperature dependence, while constant e increases as temperature increases. Constant c also decreases with increasing temperature. At each temperature, constants s and a increase with increasing %TFP (or increasing stationary phase polarity), whereas constants e and l show the opposite trend, diminishing with increasing polarity of the stationary phase. Principal component analysis shows that the five stationary phases presented in this work conform a group with other earlier synthesized trifluoropropyl siloxanes and other fluorinated stationary phases taken from literature: VB-210, QF-1, DB-200, DB-210 and PFS6, showing the same selectivity which only the fluorine atom confers. A dendrogram of 38 stationary phases supports these results.     

Column packing for gas chromatography containing immobilized poly(ethylene glycol) stationary phase

Summary Carbowax 20M poly(ethylene glycol) stationary phase was immobilized on Chromosorb W by cross-linking with pluriisocyanate. The properties of the prepared packing material were investigated. Column efficiencies of 10,960 and 7,510 theoretical plates/meter were obtained for n-pentadecane and 1-heptanol, respectively.     

Sulfonated poly(pyromellitimides) and poly(naphthylimides)

A comparative synthesis of poly(imides) based on benzidine-2,2′-disulfonic acid and dianhydrides of pyromellitic and naphthalene-1,4,5,8-tetracarboxylic acids via the high-temperature polycyclocondensation in m-cresol in the presence of triethylamine has been performed for the purpose of designing proton-exchange membranes for fuel cells. The polymers are shown to be water-soluble with poly(naphthylimide) showing by a much higher hydrolytic stability than poly(pyromellitimide). To render poly(naphthylimide) insoluble in water, copoly(naphthylimide) has been synthesized using 4,4′-bis(4-aminophenoxy)diphehyl sulfone as a comonomer. Copoly(naphthylimides) combine solubility in organic solvents with insolubility in water. These polymers demonstrate high viscosity characteristics and excellent film-forming behavior. They combine excellent thermal stability and hydrolytic resistance with proton conductivity, which is higher than the proton conductivity of Nafion commercial membranes in wide temperature and relative conductivity ranges.     

Plasma surface modification of poly (l-lactic acid) and poly (lactic-co-glycolic acid) films for improvement of nerve cells adhesion

Radio frequency (RF) plasma treatment in O₂ was applied to modify the surface of poly (l-lactic acid) (PLLA) and poly (d,l-lactic acid-coglycolic acid) (PLGA) as biodegradable polymers. The surface structure, morphology, wettability and surface chemistry of treated films were characterized by water drop contact angle measurement, scanning electron microscope (SEM), optical invert microscope, differential scanning calorimetry (DSC) and ATIR–FTIR spectroscopy. The cell affinity of the oxygen plasma treated film was evaluated by nervous tissue B65 cell culture in stationary conditions. The results showed that the hydrophilicity increased greatly after O₂ plasma treatment. The results showed that improved cell adhesion was attributed to the combination of surface chemistry and surface wettability during plasma treatment. Cell culture results showed that B65 nervous cell attachment and growth on the plasma treated PLLA was much higher than an unmodified sample and PLGA. Surface hydrophilicity and chemical functional groups with high polar component play an important role in enhancing cell attachment and growth.     

Chromatographic evaluation of some stationary phases based on poly(methyloctylsiloxane) immobilized onto silica

Several stationary phases were prepared by thermal immobilization of poly(methyloctylsiloxane) onto a silica surface using different amounts of poly(methyloctylsiloaxane), and different times and temperatures of immobilization to provide different carbon contents for the phases. The chromatographic properties were evaluated using the Tanaka test. Comparison of the results obtained with literature data using hierarchical cluster analysis showed dissimilarity with most of the commercial phases. Some basic pharmaceuticals, including six benzodiazepines were separated on one of the better PMOS phases.     

咪唑侧基功能化聚离子液体修饰的混合模式色谱固定相的制备及其色谱性能

该文合成了咪唑侧基功能化的离子液体单体1-(4-乙烯基苄基)-3-氰甲基溴化咪唑盐,通过表面引发原子转移自由基聚合将该单体接枝到硅胶表面,制备了一种新型混合模式色谱固定相。采用红外光谱、元素分析及热重分析对其结构进行表征。该色谱固定相具有良好的分离能力。通过研究流动相pH对物质保留的影响,验证了物质在该固定相上存在反相-离子交换保留机理。通过与十八烷基硅烷键合硅胶固定相比较,证实了该聚离子液体固定相对物质保留提供了π-π作用。结果表明,对咪唑侧基功能化是制备新型离子液体固定相的可行方法。     

Nanostructured latex films from poly(butyl methacrylate) latex cross-linked with poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) triblock macro-cross-linker

Biphasic polymer latexes were synthesized by a seeded swelling and polymerization method. The latexes were composed of a poly(butyl methacrylate) core and a poly(ethylene oxide) rich shell cross-linked with poly(ethylene oxide)-poly (propylene oxide)-poly(ethylene oxide) triblock diol diacrylate macro-cross-linker. Nanostructured films were obtained by annealing the biphasic polymer latexes at a temperature between the glass-transition temperatures of the core latex and the cross-linked poly(ethylene oxide) based shell. Atomic force microscope images of the latex film revealed that the poly(butyl methacrylate) core phase is confined in the poly(ethylene oxide)-rich continuous phase with the form of separate nanosized spheres.     

Fluorescence and viscometry study of complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide)

Interpolymer complexation of poly(acrylic acid) with poly(acrylamide) and hydrolysed poly(acrylamide) was studied by fluorescence spectroscopy and viscometry in dilute aqueous solutions. Changes in chain conformation and flexibility due to the interpolymer association are reflected in the intramolecular excimer fluorescence of pyrene groups covalently attached to the polymer chain. Both poly(acrylamide) and hydrolysed poly(acrylamide) form stable complexes with poly(acrylic acid) at low pH. The molecular weight of poly(acrylic acid) and solution properties such as pH and ionic strength were found to influence the stability and the structure of the complexes. In addition, the polymer solutions mixing time showed an effect on the mean stoichiometry of the complex. The intrinsic viscosity of the solutions of mixed polymers at low pH suggested a compact polymer structure for the complex.     

Preparation of poly(vinyltetrazole) chain-grafted poly(glycidymethacrylate-co-ethylenedimethacrylate) beads by surface-initiated atom transfer radical polymerization for the use in weak cation exchange and hydrophilic interaction chromatography

A novel stationary phase for weak cation exchange (WCX) and hydrophilic interaction chromatography (HILIC) was prepared with surface-initiated atom transfer radical polymerization (SI-ATRP). Vinyltetrazole was grafted onto the surface of the beads in water medium with the polyglycidylmethacrylate beads (P_GMA/EDMA) previously modified with 2-bromoisobutryl bromide as the macromolecule initiators and CuCl as catalyst. The poly(vinyltetrazole)-grafted beads obtained with different atom transfer radical polymerization (ATRP) formulations were tried as chromatographic packings in ion-exchange chromatography. The results showed that the prepared columns could separate the tested proteins with high efficiency and high capacity, and the retention time of protein had a positive relationship with increasing the chain lengths of the grafted poly(vinyltetrazole) (PVT). The prepared column was also found to be able to separate nucleosides by hydrophilic interaction chromatographic mode.