Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006     

Antibacterial cotton fabric with in situ generated silver nanoparticles by one-step hydrothermal method

The cotton fabrics were immersed in 1–5?mM aqueous silver nitrate solutions maintained at 80°C for 24?h to in situ generate silver nanoparticles. The presence of silver nanoparticles in the nanocomposite films was proved by microscopic observation. Fourier transform infrared spectra indicated the role of hydroxyl and carboxyl groups of cotton fabric in reducing the silver salt to nanosilver. The nanocomposite cotton fabrics showed good antibacterial activity against Gram-negative and Gram-positive bacteria. The antibacterial cotton fabrics can be considered for medical applications such as surgical aprons, wound cleaning, and dressing.     

Silver Nanoparticle-Anchored Human Hair Kerateine/PEO/PVA Nanofibers for Antibacterial Application and Cell Proliferation

The main core of wound treatment is cell growth and anti-infection. To accelerate the proliferation of fibroblasts in the wound and prevent wound infections, various strategies have been tried. It remains a challenge to obtain good cell proliferation and antibacterial effects. Here, human hair kerateine (HHK)/poly(ethylene oxide) (PEO)/poly(vinyl alcohol) (PVA) nanofibers were prepared using cysteine-rich HHK, and then, silver nanoparticles (AgNPs) were in situ anchored in the sulfur-containing amino acid residues of HHK. After the ultrasonic degradation test, HHK/PEO/PVA nanofibrous mats treated with 0.005-M silver nitrate were selected due to their relatively complete structures. It was observed by TEM-EDS that the sulfur-containing amino acids in HHK were the main anchor points of AgNPs. The results of FTIR, XRD and the thermal analysis suggested that the hydrogen bonds between PEO and PVA were broken by HHK and, further, by AgNPs. AgNPs could act as a catalyst to promote the thermal degradation reaction of PVA, PEO and HHK, which was beneficial for silver recycling and medical waste treatment. The antibacterial properties of AgNP-HHK/PEO/PVA nanofibers were examined by the disk diffusion method, and it was observed that they had potential antibacterial capability against Gram-positive bacteria, Gram-negative bacteria and fungi. In addition, HHK in the nanofibrous mats significantly improved the cell proliferation of NIH3T3 cells. These results illustrated that the AgNP-HHK/PEO/PVA nanofibrous mats exhibited excellent antibacterial activity and the ability to promote the proliferation of fibroblasts, reaching our target applications.     

Antibacterial and wound healing properties of cellulose acetate electrospun nanofibers loaded with bioactive glass nanoparticles; in-vivo study

Bioactive glasses (BGs) have gained great attention owing to their versatile biological properties. Combining BG nanoparticles (BGNPs) with polymeric nanofibers produced nanocomposites of great performance in various biomedical applications especially in regenerative medicine. In this study, a novel nanocomposite nanofibrous system was developed and optimized from cellulose acetate (CA) electrospun nanofibers containing different concentrations of BGNPs. Morphology, IR and elemental analysis of the prepared electrospun nanofibers were determined using SEM, FT-IR and EDX respectively. Electrical conductivity and viscosity were also studied. Antibacterial properties were then investigated using agar well diffusion method. Moreover, biological wound healing capabilities for the prepared nanofiber dressing were assessed using in-vivo diabetic rat model with induced wounds. The fully characterized CA electrospun uniform nanofiber (100–200 nm) with incorporated BGNPs exhibited broad range of antimicrobial activity against gram negative and positive bacteria. The BGNP loaded CA nanofiber accelerated wound closure efficiently by the 10th day. The remaining wound areas for treated rats were 95.7?±?1.8, 36.4?±?3.2, 6.3?±?1.5 and 0.8?±?0.9 on 1st, 5th, 10th and 15th days respectively. Therefore, the newly prepared BGNP CA nanocomposite nanofiber could be used as a promising antibacterial and wound healing dressing for rapid and efficient recovery.

     

Durable antibacterial Ag/polyacrylonitrile (Ag/PAN) hybrid nanofibers prepared by atmospheric plasma treatment and electrospinning

Durable antibacterial Ag/polyacrylonitrile (Ag/PAN) hybrid nanofibers were prepared by atmospheric plasma treatment and electrospinning. Atmospheric helium plasma treatment was first used to reduce the AgNO₃ precursor in pre-electrospinning solutions into metallic silver nanoparticles, followed by electrospinning into continuous and smooth nanofibers with Ag nanoparticles embedded in the matrix. SEM, TEM, and EDX spectra were used to study the structure and surface elemental composition of the nanofibers. Silver nanoparticles, with diameters ranging between 3 and 6 nm, were found to be uniformly dispersed in the nanofiber matrix. The Ag/PAN nanofibers exhibited slow and long-lasting silver ion release, which provided robust antibacterial activity against both Gram-positive Bacillus cereus and Gram-negative Escherichia coli microorganisms.     

Hyaluronic Acid (HA)‐Based Silk Fibroin/Zinc Oxide Core–Shell Electrospun Dressing for Burn Wound Management

Burn injuries represent a major life‐threatening event that impacts the quality of life of patients, and places enormous demands on the global healthcare systems. This study introduces the fabrication and characterization of a novel wound dressing made of core–shell hyaluronic acid–silk fibroin/zinc oxide (ZO) nanofibers for treatment of burn injuries. The core–shell configuration enables loading ZO—an antibacterial agent—in the core of nanofibers, which in return improves the sustained release of the drug and maintains its bioactivity. Successful formation of core–shell nanofibers and loading of zinc oxide are confirmed by transmission electron microscopy, Fourier‐transform infrared spectroscopy, and energy dispersive X‐ray. The antibacterial activity of the dressings are examined against Escherichia coli and Staphylococcus aureus and it is shown that addition of ZO improves the antibacterial property of the dressing in a dose‐dependent fashion. However, in vitro cytotoxicity studies show that high concentration of ZO (>3 wt%) is toxic to the cells. In vivo studies indicate that the wound dressings loaded with ZO (3 wt%) substantially improves the wound healing procedure and significantly reduces the inflammatory response at the wound site. Overall, the dressing introduced herein holds great promise for the management of burn injuries.     

Antibacterial cotton fabrics with in situ generated silver and copper bimetallic nanoparticles using red sanders powder extract as reducing agent

Using aqueous extraction of red sanders powder as a reducing agent, silver and copper bimetallic nanoparticles were in situ generated in cotton fabrics. Silver and copper nanoparticles were also generated separately for comparison. The resulted nanocomposite cotton fabrics (NCFs) were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and antibacterial tests. SEM analysis indicated the generation of more number of nanoparticles when bimetallic source solutions were used. Further, the size range of the generated bimetallic nanoparticles was found to be lower than when individual metal nanoparticles were generated in NCFs. XRD analysis confirmed the in situ generation of silver and copper nanoparticles when equimolar bimetallic salt source solutions were utilized. The NCFs with bimetallic nanoparticles exhibited higher antibacterial activity against both Gram-negative and Gram-positive bacteria and hence can be considered for applications as antibacterial bed and dressing materials.     

Electrospun PVA Nanofibrous Membranes Reinforced with Silver Nanoparticles Impregnated Cellulosic Fibers: Morphology and Antibacterial Property

To enhance the mechanical and antibacterial properties of silver nanoparticle impregnated cellulosic fibers, carboxy-cellulose nanocrystals(CCNs) were grafted with chitooligosaccharide(COS), which was used as a stabilizer for silver nanoparticles (AgNPs). Nanofibrous membranes reinforced with silver nanoparticle impregnated cellulosic fibers(CCN-COS-AgNP) were prepared via electrospinning using polyvinyl alcohol(PVA) as a matrix. The effects of CCN-COS-AgNP contents on the morphology, surface composition, mechanical properties, and antibacterial performances of the prepared CCN-COS-AgNP/PVA membranes were examined. The addition of CCN-COS-AgNP certainly improved the mechanical properties and antibacterial performances of the PVA nanofibers. The tensile strength was significantly increased from 4.40 MPa to 8.60 MPa when 8% CCN-COS-AgNP(mass ratio) was introduced. When 10%(mass ratio) CCN-COS-AgNP was added, the nanofibers showed an excellent antibacterial activity for S. aureus(Staphylococcus aureus) and E. coli(Escherichia coli), with the maximum inhibition zones of 2.30 and 1.60 cm, respectively. Moreover, the 2%(mass ratio) CCN-COS-AgNP/PVA fibrous membrane showed 126% cell viability for mg63 human osteoblasts. The electrospun PVA membrane has great potential application in biomedical field.     

Janus hydrogel with dual antibacterial and angiogenesis functions for enhanced diabetic wound healing

Anti-infection and neovascularization at the wound site are two vital factors that accelerate diabetic wound healing. However, for a wound healing dressing, the two functions need to work at different sites(inner and outer), giving big challenges for dressing design. In this study, we fabricated a novel sodium alginate/chitosan(SA/CS) Janus hydrogel dressing by the assembly of SA hydrogel loaded with silver nanoparticles(Ag NPs) and CS hydrogel impregnated with L-arginine loaded sodium alginate ...     

Preparation and Application of Quaternized Chitosan- and AgNPs-Base Synergistic Antibacterial Hydrogel for Burn Wound Healing

Infection is the major reason that people die from burns; however, traditional medical dressings such as gauze cannot restrain bacterial growth and enhance the healing process. Herein, an organic- and inorganic-base hydrogel with antibacterial activities was designed and prepared to treat burn wounds. Oxidized dextran (ODex) and adipic dihydrazide grafted hyaluronic acid (HA-ADH) were prepared, mixed with quaternized chitosan (HACC) and silver nanoparticles to fabricate Ag@ODex/HA-ADH/HACC hydrogel. The hydrogel, composed of nature biomaterials, has a good cytocompatibility and biodegradability. Moreover, the hydrogel has an excellent antibacterial ability and presents fast healing for burn wounds compared with commercial Ag dressings. The Ag@ODex/HA-ADH/HACC hydrogel will be a promising wound dressing to repair burn wounds and will significantly decrease the possibility of bacterial infection.     

Fabrication and characterization of a novel wound scaffold based on polyurethane added with Channa striatus for wound dressing applications

Abstract

Wound healing is a complex process and it involves restoration of damaged skin tissues. Several wound dressings comprising naturally made substances are constantly investigated to assist wound healing. In this research, a new wound dressing based on polyurethane (PU) supplemented with essence of Channa striatus (CS) fish oil was made by electrospinning. Morphological study depicted the reduction in fiber diameter than PU with the addition of fish oil (0.552?±?0.109?μm for 8:1 v/v% and 0.519?±?0.196?μm 7:2 v/v%) than the pristine PU (0.971?±?0.205?µm). Fourier transform infrared spectroscopy (FTIR) analysis revealed the presence of fish oil in the composite as identified through increasing peak intensity. Fish oil resulted in the hydrophilic behavior (88?±?3 (8:1 v/v) and 70?±?6 (7:2 v/v)) as revealed in the contact angle analysis. Thermal gravimetric analysis (TGA) showed the superior thermal behavior of the wound dressing patch compared to the PU. Atomic force microscopy (AFM) analysis insinuated a decrease in the surface roughness of the pristine polyurethane with the added fish oil. Coagulation assays signified the delay in the blood clotting time portraying its anti-thrombogenic behavior. Hemolytic assay revealed the less toxic nature of the developed nanocomposites with the red blood cells (RBC’s) depicting its safety with blood. Hence, polyurethane nanofibers supplemented with fish oil made them as deserving candidates for wound dressing application.     

Functionalization of nanofibrillated cellulose with silver nanoclusters: fluorescence and antibacterial activity

Native cellulose nanofibers are functionalized using luminescent metal nanoclusters to form a novel type of functional nanocellulose/nanocluster composite. Previously, various types of cellulose fibers have been functionalized with large, non-luminescent metal nanoparticles. Here, mechanically strong native cellulose nanofibers, also called nanofibrillatedcellulose (NFC), microfibrillatedcellulose (MFC) ornanocellulose, disintegrated from macroscopic cellulose pulp fibers are used as support for small and fluorescent silver nanoclusters. The functionalization occurs in a supramolecular manner, mediated by poly(methacrylic acid) that protects nanoclusters while it allows hydrogen bonding with cellulose, leading to composites with fluorescence and antibacterial activity.     

Ag nanoparticle-embedded one-dimensional β-CD/PVP composite nanofibers prepared via electrospinning for use in antibacterial material

Ag nanoparticle-embedded one-dimensional β-CD (β-cyclodextrin)/PVP composite nanofibers were prepared using a one-step electrospinning technique. Ag nanoparticles were obtained in the AgNO₃/β-CD/DMF solution, in which silver nitrate been introduced as the precursor, DMF as solvent, β-CD as reducing and capping agent. After electrospinning of the composite solution at room temperature, the β-CD/PVP nanofibers containing Ag nanoparticles were obtained. The electrospun composite solution containning Ag nsnopsrticles were confirmed by UV-visible absorption spectra; the resulting composite nanofibers were characterized by scanning electron microscopy , transmission electron microscopy, and X-ray diffraction. Ag-β-CD/PVP nanofiber exhibits good antibacterial property for Escherichia coli and Staphylococcus aureus. Consequently, we propose that these Ag nanoparticle-embedded 1D-nanostructures prepared via electrospinning may be used as antibacterial material.     

A TRILAYER DERMAL EQUIVALENT CONTAINING SILVER NANOPARTICLES WITH ENHANCED ANTIBACTERIAL PROPERTY

A dermal equivalent having a trilayered structure was designed by combining a silver nanoparticles incorporated chitosan film with a bilayer collagen-chitosan/silicon membrane dermal equivalent(BDE).The silver nanoparticles prepared at different conditions were characterized by UV-Vis and transmission electron microscopy(TEM).The macroscopic sharp and the microstructure of the trilayer dermal equivalent(TDE) were also studied.Then,the in vitro antibacterial property of TDE was evaluated by the antibacter...     

A novel and convenient preparation of antibacterial polyacrylonitrile nanofibers via post-modification using nitrile click chemistry and electrospinning

An efficient, novel and convenient method for the synthesis of modified polyacrylonitrile (PAN) with antibacterial property is reported. The modification of PAN was prepared by a nitrile click chemistry reaction with sodium azide (NaN₃) and silver nitrate (AgNO₃) as catalyst to yield antibacterial polymeric materials with 5-vinyltetrazole units. The results showed that 5-vinyltetrazole units had coordinated with silver ion (Ag⁺). Through the electrostatic spinning technology, the post-modification PAN nanofibers (PAN–Ag⁺ nanofibers) were prepared and the fibers were tested for their antimicrobial properties by the bacterial infection experiment. Afterwards, the antibacterial and stable performance of different proportions of silver ions in PAN nanofibers has been compared. The PAN–Ag⁺ nanofibers are characterized for mechanical and thermomechanical properties, structural analysis, appearance characteristics, as well as the antibacterial properties. And the nanofibers exhibit marvelous chemical stability according to the thermogravimetric analysis. When at 800 °C, the PAN decomposed about 60%, while the decomposition of the PAN–Ag⁺s was 40%. Based on the bacterial infection experiment, PAN–Ag⁺ nanofibers’ antibacterial properties were stronger with the increase of silver ions, such as the number of bacteria clone was smaller and the bacteriostatic ring was larger. Hence, with combination of silver ions, the final polymers show strong antimicrobial properties.     

Investigation of amine and polyol functionality in extracts of polyurethane wound management dressings using MALDI-MS

Polyurethane (PU) foams used in wound management are produced by a reaction between aromatic diisocyanates and polyether polyols. There is concern that residues of these starting materials, which may contain aromatic amine functionality, may leach from the finished polymer during in vivo applications. Furthermore, oligomers and additives may be leached from the PU system after the polymerization process is complete. Finished polymers have, therefore, been extracted with a range of solvents, such as water, diethyl ether and dilute HCl. The extracts were subjected to MALDI-MS (matrix-assisted laser desorption ionization mass spectrometry) analysis in an attempt to determine the amine and polyol functionality. Direct MALDI-MS analysis of the wound dressing extracts indicated the presence of components based on the polyols [corrected] used in the formulation of the foam. The spacing between the peaks identified the base monomer used in the polyol. MALDI-MS analysis of the fluorescamine derivatives of model amine compounds has demonstrated the anticipated increase in mass (278 for monoamines and 278 and 556 for diamines). Similar results were obtained from the derivatization of model polyols with phenyl isocyanate, where the mass shift (n x 119) was a direct measure of the number of active hydroxyl groups. Fluorescamine labelling of PU foams shows the colour change which could be [corrected] indicative of the presence of an amine, but the subsequent MALDI-MS analysis was unable to demonstrate the anticipated increase in mass.     

Formation of functional nanofibrous electrospun polyurethane and murivenna oil with improved haemocompatibility for wound healing

Electrospinning is an emerging tool and promising method to fabricate polymer nanofibers. The aim of this work was to fabricate electrospun polyurethane mats reinforced with murivenna oil for wound dressings. The scanning electron microscopy (SEM) micrographs showed the fiber diameter of nanocomposites in the range of 740 ± 160 nm and found to be decreased compared to pure polyurethane. Surface of nanocomposites was analyzed by Fourier transform infrared spectroscopy (FTIR) insinuated the interactions between PU and murivenna oil by the formation of hydrogen bond and changes in the characteristics peaks. Contact angle of the PU incorporated murivenna oil showed a decrease in its value compared to pure PU indicating the increased wettability and hydrophilic nature. The thermal degradation and stability of fabricated composites was found be enhanced compared to pure PU. The surface morphology through atomic force microscopy (AFM) analysis showed a change in surface roughness due to presence of murivenna oil in the polymer matrix. In blood compatibility results, both activated partial thromboplastin time (APTT) and prothrombin time (PT) were delayed due to improved surface properties and the addition of murivenna oil in the PU matrix. Compared to pure PU, the hemolysis assay of the PU incorporated murivenna oil showed a significant decrease in the percentage of lysis of red blood cells indicating better blood compatibility. Following the results, it was confirmed that fabricated novel scaffolds having better physicochemical and enhanced blood compatibility properties may be utilized for wound dressing.     

Effect of sunlight on the preparation and properties of cellulose/silver nanoparticle composite films by in situ method using Ocimum sanctum leaf extract as a reducing agent

Cellulose/silver nanoparticle composite films with in situ-generated silver nanoparticles (AgNPs) were prepared using Ocimum sanctum leaf extract as a reducing agent in the absence and presence of sunlight and were characterized by SEM, FTIR, XRD, and antibacterial tests. Sunlight hastened up the preparation of these composite films. The average size of the in situ-generated AgNPs was reduced by the sunlight. The antibacterial activity and other properties of the composites were enhanced by the sunlight. The cellulose/AgNP composite films with improved properties by sunlight can be considered for medical purpose as antibacterial dressing materials.     

In vitro and in vivo evaluations of nanofibrous nanocomposite based on carboxymethyl cellulose/polycaprolactone/cobalt-doped hydroxyapatite as the wound dressing materials

These days, Ophthalmic wound treatment is a major problem; due to its nature, bio/materials are the best choices as wound dressing materials. The main objective of the current survey is to develop and investigate effective wound dressing materials for skin care applications. In these ways, we combined the good biological properties of Cobalt-doped hydroxyapatite particles (CoHAp) with the structural properties of Polycaprolactone (PCL)/ carboxymethyl cellulose (CMC) nanofibers. Electrospinning and co-precipitation methods were used to synthesize nanofibers and CoHAp particles, respectively. Nanocomposites were synthesized in the absence and different percentages of CoHAp. The PCL/CMC, PCL/CMC/CoHA 5 %, PCL/CMC/CoHA 10 %, and PCL/CMC/CoHA 15 % formulated nanocomposites have the diameter of 383 ± 50, 391 ± 84, 441 ± 65, and 495 ± 99 nm, respectively. The synthesized nanofibrous wound dressing porosity and water absorption capacity were in the range of 40 to 60 % and 32 to 63 %, respectively. Hemo and cytocompatibility of the nanofibrous wound dressing were analyzed by in vitro evaluation, and the results were satisfactory and the structures were fully biocompatible. The PCL/CMC/CoHA 10 % wound dressing, were selected as the best nanocomposites for wound healing based on our animal studies on the healing outcomes. The results showed that the PCL/CMC nanofibers-Cobalt-doped HAp wound dressing is an effective bioactive nano-biomaterials for the wound healing process.     

Application of micellar electrokinetic chromatography for detection of silver nanoparticles released from wound dressing

The recent emergence of nanotechnology has provided a new therapeutic modality in case of silver nanoparticles. Dressings containing silver form the basis for the treatment of burns and wounds, either acute or chronic ones. The aim of the study was to examine silver release from the different wound dressings: commercially available (Atrauman Ag, Aquacel Ag) and experimental (FKDP‐AgNPs) using MEKC. In order to characterize prepared keratin based wound dressing before and after its modification with AgNPs, a compositional analysis was conducted using energy dispersive X‐ray spectroscopy. Nanosilver toxicity was evaluated with the 3‐(4,5‐dimethylthiazol‐2‐yl)‐5‐(3‐carboxymethoxyphenyl)‐2‐(4 sulfophenyl)‐2H‐tetrazolium test. Silver release from wound dressings was assessed using MEKC. The best separation was observed for MEKC in 20 mM borate buffer at pH 9 with 20 mM SDS addition. In vitro studies showed silver at higher concentration than 10 ppm exerted a toxic effect on fibroblasts isolated from diabetic mice versus. NIH/3T3 and BJ cell lines (p < 0.05). We observed silver was released more gradually from experimental FKDP‐AgNPs wound dressing, in compare to commercially available wound dressings. The fast and low‐cost method utilizing MEKC can be used in clinical practice to detect silver release from the wound dressings.