Analysis of the kinetics of diffraction efficiency during the holographic grating recording in azobenzene functionalized polymers

The laser-assisted holographic grating recording process in films of azobenzene functionalized polymers is usually studied by observation of the efficiency of light scattering on a developing in time diffraction grating. Various possible mechanisms contributing to grating formation as well as the bulk or surface origin (bulk refractive index and/or relief grating) of light scattering make the analysis of kinetics of grating recording, from the light scattering data only, difficult and ambiguous. To fully explain experimentally observed various and complex (frequently nonexponential) kinetics of the first-order light diffraction intensity, we considered a simple single-exponential growth of the two phase gratings in the same polymer film. In modeling we assumed that the bulk refractive index grating Deltan(t) and the surface relief grating Deltad(t) differ considerably in their growth rates and we allowed for a nonstationary phase shift Deltaphi(t) between them which was experimentally observed during the recording process. The origin of the nonstationary phase shift is a result of a slow shift of interference pattern due to delicate symmetry breaking in illumination conditions (e.g., difference in beam intensities and deviation of exact symmetrical beam incidence angles on the sample). Changing only such parameters as stationary amplitudes of refractive index and relief gratings for a span of phase shifts (0-pi) between them, we obtained a series of kinetic responses which we discuss and interpret. The various examples of temporal evolution of diffraction efficiency for the same grating formation kinetics, modeled in our work, supply evidence that great care must be taken to properly interpret the experimental results.     

Alignment control of liquid crystals on surface relief gratings

Liquid crystal alignment layers of a high T_g polymer containing an azobenzene moiety are prepared by photofabrication of a surface relief grating (SRG). The interference pattern of a circular and linearly polarized Ar⁺ laser beam generated the surface relief grating and the morphology was detected by atomic force microscope. The optical anisotropy of the films was investigated by polarizing optical microscopy. The orientation of the optical axis of the film mainly depends on the direction of the initial polarization plane. Nematic liquid crystals were aligned parallel to the direction of the grating, but the pretilt angles of the liquid crystals were nearly zero. Irradiation with homogeneous linearly polarized light could also align liquid crystals, but this alignment capability was weaker than that of the SRG film.     

Alignment control of liquid crystals on surface relief gratings

Liquid crystal alignment layers of a high T _g polymer containing an azobenzene moiety are prepared by photofabrication of a surface relief grating (SRG). The interference pattern of a circular and linearly polarized Ar⁺ laser beam generated the surface relief grating and the morphology was detected by atomic force microscope. The optical anisotropy of the films was investigated by polarizing optical microscopy. The orientation of the optical axis of the film mainly depends on the direction of the initial polarization plane. Nematic liquid crystals were aligned parallel to the direction of the grating, but the pretilt angles of the liquid crystals were nearly zero. Irradiation with homogeneous linearly polarized light could also align liquid crystals, but this alignment capability was weaker than that of the SRG film.     

A Rapid-Scanning Spectrometer with Wavelength Synchronization by a Laser Rotary Encoder for Versatile Applications to Atomic Emission Spectrometry

A rapid-scanning spectrometer was developed for versatile use in atomic emission spectroscopy. The sine bar was removed and a laser rotary encoder was fitted to the grating shaft for wavelength synchronization. The pulses produced by the encoder when the grating shaft was driven back and forth in sector movements were counted to detect the grating angle and the wavelength. The wavelength accuracy and precision obtained were ±0.26 and ±0.013 nm, respectively. The maximum scanning speed was limited below 4000 nm/s by a malfunction in wavelength synchronization. The rapid-scanning spectrometer was successfully used for multielement determinations, correction of background emission, and characterization of an inductively coupled plasma.     

可溶性聚酰亚胺类偶氮高分子的合成与表征

用聚合物的后重氮偶合方法合成了以可溶性聚酰亚胺为主链 ,偶氮生色团为侧基的新型偶氮高分子 ,并通过引入线性长链烷烃侧基来提高聚合物的溶解性 .采用红外光谱、氢核磁共振、紫外光谱和热分析等手段 ,对产物的结构、热性能及光学性能等进行了表征 .该聚合物膜在氩离子干涉激光的照射下形成正弦波形的表面起伏光栅 ,起伏深度可达 2 0 0nm .     

Distributed feedback grating fabricated from hybrid polymer precursor gel by employing short‐pulse laser interference for photopumped polymer laser applications

The application of hybrid polymer precursor gel for distributed feedback (DFB) grating laser fabricated by short‐pulse laser interference has been investigated. The precursor gel was prepared by sol–gel process from siloxane‐modified methacrylate monomer. The molecular structure characterization results show the formation of inorganic networks within the precursor gel, which further undergoes the formation of organic–inorganic polymer network by photopolymerization. The laser interference was performed by using the frequency‐tripled output of nanosecond Nd–YAG laser. The fabricated DFB gratings exhibit photopumped lasing actions with high consistency between the grating periodicity (between 380 and 1030 nm) and the lasing wavelength, which appears at the wavelength of the second‐order Bragg reflection. The atomic force microcopy measurements clearly show the formation of surface relief (corrugated) structure in those gratings. The mechanism of surface relief formation is attributed to a fast photo‐induced swelling process, which is unique property belonging to this kind of hybrid polymer precursor gel. Copyright © 2011 John Wiley & Sons, Ltd.     

Probing ultrafast dynamics in adenine with mid-UV four-wave mixing spectroscopies

Heterodyne-detected transient grating (TG) and two-dimensional photon echo (2DPE) spectroscopies are extended to the mid-UV spectral range in this investigation of photoinduced relaxation processes of adenine in aqueous solution. These experiments are the first to combine a new method for generating 25 fs laser pulses (at 263 nm) with the passive phase stability afforded by diffractive optics-based interferometry. We establish a set of conditions (e.g., laser power density, solute concentration) appropriate for the study of dynamics involving the neutral solute. Undesired solute photoionization is shown to take hold at higher peak powers of the laser pulses. Signatures of internal conversion and vibrational cooling dynamics are examined using TG measurements with signal-to-noise ratios as high as 350 at short delay times. In addition, 2DPE line shapes reveal correlations between excitation and emission frequencies in adenine, which reflect electronic and nuclear relaxation processes associated with particular tautomers. Overall, this study demonstrates the feasibility of techniques that will hold many advantages for the study of biomolecules whose lowest-energy electronic resonances are found in the mid-UV (e.g., DNA bases, amino acids).     

Refractive index‐modulated grating in two‐mode planar polymeric waveguide produced by two‐photon polymerization

A polymeric waveguide film was manufactured by spinning the materials on quartz substrate. Two‐photon‐initiated photopolymerization was carried out by tight‐focusing femtosecond laser pulses in the two‐mode planar waveguide. A typical index‐modulated grating of 2.5 × 2 mm areas without morphology was fabricated. The results show that peak‐to‐peak modulation depth of the surface profile of grating region was only about 7 nm. The diffraction efficiency (DE) of the grating with a spacing period 2 µm was 0.17% and the corresponding index modulation reached 5.7 × 10^?3. Copyright © 2007 John Wiley & Sons, Ltd.     

主链型偶氮聚酯的合成和光响应性研究

合成了一种主链含偶氮生色团的线性聚酯,用核磁共振、热分析、紫外-可见光谱、红外光谱、GPC等方法对其结构进行了表征.该聚合物膜在线偏振激光的作用下,光致取向形成的双折射各向异性Δn可达0.07.聚合物的旋涂膜经干涉的P偏振488nmAr⁺激光照射60min后,得到了规则的正弦表面起伏光栅,光栅的一级衍射效率约为18%.     

Design of combinatorial shadow masks for complete ternary-phase diagramming of solid state materials

We report on a novel mask design for the combinatorial synthesis of a ternary composition spreads library, which allows such libraries to be deposited through a series of simple masks on a rotatable mount. This eliminates the use of complicated actuation of a heated substrate. In our configuration, this design leads to a standard linear phase diagram by varying the growth rate of each constituent nearly linearly from 0 to 100% at a triangular area on the substrate. Film growth occurs as a series of cycles in which one molecular layer of the material is deposited over the entire area of the spread by a synchronization of the mask movement, target exchange, and laser pulses. The technique has been applied to the synthesis of photoluminescent TbCa(4)O(BO(3))(3)-ScCa(4)O(BO(3))(3)-PrCa(4)O(BO(3))(3), demonstrating its value for the mapping of direct relationship between composition and the light-emitting property.     

Phase separation dynamics of aqueous solutions of thermoresponsive polymers studied by a laser T-jump technique

Poly(N-isopropylacrylamide) and poly(vinyl methyl ether) are well-known thermoresponsive polymers. The aqueous solutions of these polymers exhibit a phase transition followed by phase separation with LCST approximately 305-310 K. In the present study, the dynamic behavior of the phase separation was analyzed by a laser T-jump method. Two different T-jump methodologies were employed: the first was a dye-photosensitized T-jump technique (indirect heating) using 532 nm laser pulses, while the other was a direct heating T-jump technique using 1.2 mum laser pulses. Both methods gave similar results. The time constants (tau) of the phase separation were systematically determined for 1-10 wt % aqueous solutions of the polymers, and a hydrodynamic radius (R) dependence for tau was clearly observed. The values of tau increased linearly with increasing square of R. The present behavior is interpretable in the framework of Tanaka's model for the volume phase transition of a gel, since each of the polymer chains are entangled in the present sample solutions, which can be regarded as approximating to a gel in solution.     

Applications of ultrashort shaped pulses in microscopy and for controlling chemical reactions

This article presents a new perspective on laser control based on insights into the effect of spectral phase on nonlinear optical processes. Gaining this understanding requires the systematic evaluation of the molecular response as a function of a series of pre-defined accurately shaped laser pulses. The effort required is rewarded with robust, highly reproducible, results. This approach is illustrated by results on selective two-photon excitation microscopy of biological samples, where higher signal and less photobleaching damage are achieved by accurate phase measurement and elimination of high-order phase distortions from the ultrashort laser pulses. A similar systematic approach applied to laser control of gas phase chemical reactions reveals surprising general trends. Molecular fragmentation pattern is found to be dependent on phase shaping. Differently shaped pulses with similar pulse duration have been found to produce similar fragmentation patterns. This implies that any single parameter that is proportional to the pulse duration, such as second harmonic generation intensity, allows us to predict the molecular fragmentation pattern within the experimental noise. This finding, is illustrated here for a series of isomers. Bond selectivity, coherent photochemistry and their applications are discussed in light of results from these systematic studies.     

Mass migration on a polymer surface caused by photoinduced molecular rotation

We demonstrated the formation of a photoinduced surface relief grating using thin films comprising a photochromic molecular motor, 9-(2-phenyl-2,3-dihydro-cyclopenta[a]naphthalen-1-ylidene)-9H-fluorene. Results show that mass migration occurred by patterned light irradiation prepared from interfered laser beams and a photomask.     

Small dosage of holographic exposure via a He-Ne laser to fabricate tunable liquid crystal phase gratings operated with low electric voltages

The fabrication processes of tunable liquid crystal (LC) phase gratings via small dosage of holographic exposure of a He-Ne laser beam were investigated. The initial LC cells were filled with various ratios of ingredients mainly including LCs and photocurable monomers. The fabricated LC phase gratings shown in the Raman–Nath regime possessed a maximum value of first-order diffraction efficiency close to 33.3% at 5.8 V_rms. Furthermore, optimised grating was demonstrated and used as an interference recorder in holography.     

Fabrication of photoprocessible azo polymer microwires through a soft lithographic approach

In this work, a soft lithographic approach has been developed to fabricate free-standing azo polymer microwires with unique photoprocessible characteristics. In the process, an epoxy-based azo polymer (BP-AZ-CA) was used to prepare both the soft lithographic masters and the microwires. The masters were prepared by photofabricating surface relief gratings on BP-AZ-CA thin films. Then the elastomeric stamps were prepared by replica molding of poly(dimethylsiloxane) prepolymer against the masters. With use of the stamps and a solution of BP-AZ-CA as "ink", the microwires were prepared by contact printing and wet etching. The microwires possessed a uniform sub-micrometer-scale transverse dimension and macroscopic longitudinal dimension. Those characteristic sizes depended on the adjustable features of the masters and stamps used in the process. The transverse dimension of the microwires could be altered after exposure to a linearly polarized Ar+ laser single beam with the polarization direction perpendicular to the longitudinal axes of the microwires. Upon irradiation of interfering p-polarized Ar+ laser beams, regular surface relief structures could be inscribed on the microwires along the longitudinal direction, which coincided with both the polarization direction of the laser beams and the grating vector direction of the interference pattern. The microwires with photoprocessible properties are potentially usable as sub-micrometer-scale materials in future miniaturized components and devices. The approach reported in this work can be further extended to the fabrication of nano-/microwires from other polymeric materials.     

The influence of laser field noise on controlled quantum dynamics

The influence of laser noise on the dynamics of simple quantum systems is analyzed. An anharmonic ladder is chosen for illustration and several pulses are obtained that optimize the yield of a quantum transition by constraining the laser parameters. The following models of laser noise are introduced: Amplitude white noise, phase white noise, frequency white noise and shot-to-shot static noise in the different pulse parameters. It is shown that the optimal pulses are robust to white amplitude noise, since the system acts as a dynamical filter. White phase noise affects the optimal pulses in a similar way by reducing the pulse area. This effect can be easily compensated for by pulse amplitude rescaling, up to a high level of noise. White frequency noise reduces the pulse area and induces spectral broadening, more strongly affecting the high frequency components. It can be partially compensated for by amplitude rescaling. The effects of static noise in the parameters cannot be easily corrected. It is shown that optimal pulses that drive n-photon transitions become more sensitive to noise in the amplitude and less sensitive to noise in the frequency as n increases. The effects of noise in the relative phase rapidly become constant for a large number of interfering pathways.