Preparation of new poly(ester triazole) and poly(amide triazole) by “click chemistry”

New dialkynyl monomers containing furan and ester or amide units were prepared via three step reactions from ethyl furan-2-carboxylate. Their click polymerization with either poly(ethylene glycol) diazide or poly(tetrahydrofuran) diazide catalyzed by Cu(I) led to corresponding amorphous poly(ester triazole) and poly(amide triazole) with molecular weights in the range of (7–11) × 10³ and with glass transition temperatures in the range of ?35 and ?19°C. The temperature at 5% wt loss (T ₁₀), determined from TGA of polyazomethines were in the range 345–365°C indicating their good thermal stability.     

Synthesis and characterization of aromatic polyazomethines bearing pendant pentadecyl chains

Aromatic diamine monomer viz., 4-(4′-aminophenoxy)-2-pentadecylbenzenamine containing pendant pentadecyl chain was synthesized starting from cashew nut shell liquid - a renewable resource material and was characterized by FTIR, ¹H and ¹³C NMR spectroscopy. A series of new (co) polyazomethines containing pendant pentadecyl chains and flexibilizing ether linkages was synthesized by polycondensation of 4-(4′-aminophenoxy)-2-pentadecyl benzenamine with commercially available aromatic dialdehydes viz., terephthaldehyde (TPA), isophthaldehyde (IPA) and varying mixture of TPA and IPA. Inherent viscosities and number average molecular weights of (co) polyazomethines were in the range 0.50-0.70 dL/g and 10,490-40-800 (GPC, polystyrene standard), respectively indicating formation of medium to reasonably high molecular weight polymers. (Co) polyazomethines containing pendant pentadecyl chains were found to be soluble in common organic solvents such as chloroform, dichloromethane, tetrahydrofuran, pyridine, m-cresol and could be cast into transparent and stretchable films from their solution in chloroform. (Co) polyazomethines were essentially amorphous in nature and the formation of loosely-developed layered structure was observed arising from the packing of pendant pentadecyl chains. Polyazomethines exhibited glass transition temperatures (T_g) in the range 21-48 °C. The observed depression of glass transition temperature could be ascribed to the “internal plasticization” effect of pentadecyl chains. The temperature at 10% wt loss (T₁₀), determined from TGA in nitrogen atmosphere of polyazomethines were in the range 434-441 °C indicating their good thermal stability.     

Synthesis and Characterization of Soluble Polyester Based on Calixarene Dicarboxylic Acid with Tertiary Butyl Pendant Groups

A series of new polycalixesters(PCES) were synthesized by polyesterification of calixarene dicarboxylic acid derivatives having tertiary butyl pendant groups at the upper rim using five different diols. All polyesters were readily soluble in polar solvents such as NMP(N-methylpyrrolidone), DMF(dimethylformamide), DMSO(dimethylsulfoxide), pyridine, THF(tetrahydrofurane), HMPA(hexamethylenephosphoramide) and DMAC(dimethylacetamide). The PCES were also partially soluble in TCE(tetrachloroethane) and ethanol and they were unsoluble in aceton. The glass transition temperatures of polyesters were between 80-184 °C, the crystallinity temperatures of polyesters were between 130–212 °C and the melting temperatures of polyesters were between 185–234 °C, as determined by differential scanning calorimeter(DSC). The inherent viscosities of polyesters were obtained from 0.55 dL/mg to 0.61 dL/mg. The temperatures at 10% weight loss of polyesters ranged from 182 °C to 237 °C. The temperatures at 25% weight loss of polyesters ranged from 258 °C to 331 °C. The half weight loss(50%) temperatures of polyesters were among 315 °C to 371 °C and the char yields at 600 °C were determined within 13% to 22.3% in N2 atmosphere, as determined by thermo gravimetric analysis(TGA). The polyester, PES3, has the higher melting point(234 °C) and higher inherent viscosity(molecular weight) than the other polyesters.     

Synthesis,Characterization and Thermal Properties of Imide-Containing Phthalonitrile Polymers

A series of novel imide-containing phthalonitrile polymers with flexible aryl ether units have been synthesized and characterized. Bisphenol monomers were synthesized by a multi-step synthesis involving a condensation reaction between aromatic aldehydes and 2,6-dimethyl phenol, respectively. The bisphenols obtained were reacted with 4-nitrophthalonitrile to form aryl ether linkage containing bisphthalonitriles. These products were hydrolyzed to tetra carboxylic acid, which were subsequently converted into corresponding dianhydrides. The obtained dianhydrides were reacted with synthesized 4-(4′-aminophenoxy) phthalonitrile by thermal imidization leading to the formation of imide-containing phthalonitrile monomers. The synthesized monomers were cured with 3.5 wt% of aromatic diamine, 4,4′-diaminodiphenylsulphone(DDS). The structure and properties of all compounds synthesized were confirmed by using elemental analysis, FT-IR, ¹H-NMR, ¹³C-NMR, DSC, TGA and rheometric studies. The cure temperatures are found to be in the range of 283–302°C, the temperature of 5% and 10% weight loss from TGA are in the range of 433–492°C in N₂ and 424–478°C in air, char yield at 800°C is 40–51%.     

Optically transparent,organosoluble poly(ether-amide)s bearing triptycene unit; synthesis and characterization

Abstract

Aromatic polyamides are famous high performance polymeric materials for their excellent thermal, mechanical, electrical properties, which now a days became a dominant platform for modern polymer chemistry area. Triptycene unit like structures in polymer directly affects the physiochemical properties of polymer, thus polyamides especially with triptycene unit in their backbone with aryl ether linkage imparts combination of properties such as better solubility, melts processing characteristics, and better thermal stability in contrast with those of polymers without an aryl-ether linkageNew triptycene-containing bis(ether amine), 1,4-bis(4-aminophenoxy), 2, 3-benzotriptycene (4a) was synthesized from nucleophilic displacement reactions of P-fluoronitrobenzene with 1,4-dihydroxytriptycene, followed by reduction, and elucidated by FTIR, ^1?H, ^13?C NMR spectroscopy and HRMS. A series of new polyamides containing pendant triptycene group and flexibilizing ether linkages was synthesized by polycondensation of diamine with commercially available aromatic diacischlorides viz., terephthalylchloride (TPC), isophthalylchloride (IPC) and varying molar mixture of TPC and IPC accordingly. Synthesized Poly(ether-amide)s were found soluble in common organic solvents such as chloroform, dichloromethane, tetrahydrofuran, DMF, DMAc, DMSO also could be cast into excellent transperent thin films. Inherent viscosities of polyamides were in the range 0.44–0.57 dL/g. Polyamides exhibited initial decomposition temperature (T_i), glass transition temperatures (T_g) and temperature at 10% wt loss (t₁₀), which was determined by TGA were noted in the range 212?°C–305?°C, 295?°C –309?°C and 587?°C–631?°C respectively with 24%–54% char yeild at 900?°C under nitrogen atmosphere, indicating its better thermal stability and moderate glass transition temperature.     

NEW MATERIALS DERIVED FROM POLY(4-HYDROXYSTYRENE) AS LITHIUM BATTERY CELL COMPONENTS

A new class of polyethers has been prepared by the Mitsunobu coupling of poly(4-vinyl phenol), P4VP, with low molecular weight poly(ethylene glycol)methyl ether. These comb-like polymers, having ca. 20–30% residual phenols, were characterized by IR, DSC, and TGA. Results of thermal analysis on the polymers suggest thermal stability to at least 300°C and a glass transition temperature in the range ?30 to ?40°C. Complexes with LiPF₆ gave conductivities of ca. 1 × 10^?5 S/cm at room temperature. The polymers were blended with plasticized poly(vinylidene fluoride) (PVDF) to prepare porous films and subsequently infiltrated with lithium salts and ethylene and ethyl methyl carbonate. Ionic conductivities of these hybrid films were measured from ?20°C to 40°C. Conductivities as high as 2.4 × 10^?3 S/cm are observed at room temperature. The electrochemical stability of hybrid materials was studied by cyclic voltammetry.     

Kinetics of anhydride formation in poly(acrylic acid) and its effect on the properties of a PAA-alumina composite

The kinetics of anhydride formation of poly(acrylic acid) (PAA) in porous PAA–alumina composites have been investigated by using a thermogravimetric technique (TGA). Three distinct reaction peaks at 200°C (I), 250°C (II), and 390°C (III) were identified in the dynamic TGA thermogram. These peaks were attributed to bound water removal (I), anhydride formation (II), and polymer degradation (III). The kinetics of the anhydride reaction were studied in a temperature range of 220–240°C and found to follow a second-order mechanism with an activation energy of approximately 38 kcal/mole. In addition, the bound water was found to inhibit the onset of anhydride formation. The degree of conversion to anhydride was correlated with the equilibrium swelling level attained by the composite in water.     

Influence of HZSM-5 content on behavior of CoMo/HZSM5-HMS composite catalysts in hydrodesulphurization of dibenzothiophene

CoMo-supported micro/mesoporous catalysts (CoMo/HZSM5(x)-HMS) were synthesized by varying the weight percent of zeolite (10, 20, 30 and 40 wt%). Catalytic functionalities were investigated for hydrodesulphurization reaction of dibenzothiophene over a wide temperature range of 250–400 °C. Characterization methods as XRD, XRF, FT-IR, UV–Vis DRS, NH₃-TPD, H₂-chemisorption, nitrogen adsorption–desorption and TGA confirmed the obtained results from these catalysts. A significant enhancement of the catalytic activity was observed for the catalysts supported on CoMo/HZSM5(20)-HMS at T = 350 °C (>97%).     

Synthesis and characterization of new,soluble polyazomethines bearing fluorene and carbazole units in the backbone and solubility‐improving moieties in the side group

A series of novel, soluble polyazomethines bearing fluorene and carbazole moieties in the main chain and solubility‐improving moieties in the side group (dibutyl, ethylhexyl, thienylethyloxy, furyl, and fluorenyl) were synthesized. Good‐quality films of these polymers were prepared through the conventional solution‐casting and drying processes. Depending on the polymer structure, some polymers showed a glass‐transition temperature (107–167 °C) and others showed a melting temperature (285–341 °C). The temperature of 5% weight loss under nitrogen atmosphere of the polymers ranged from 370 to 464 °C. The results indicated that the side groups incorporated into the polyazomethine structure in this work improved the polymer solubility without sacrificing thermal stability. Depending on the polymer structure, some of the polymers were crystalline whereas others were amorphous. All the polyazomethines were solution‐processable and thermally stable, making them potential candidate materials for applications in microelectronics and aerospace. Moreover, the features in the UV–visible spectra of the polyazomethines were redshifted as compared with those of the monomers from which the polymers were synthesized, indicating that these polymers, if combined with an appropriate doping agent to improve the light‐emitting and conducting abilities, may be good candidate materials for optoelectronic devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 825–834, 2004     

New thermally stable condensation polymers containing central ketal moieties derived from malonaldehydetetramethyl acetal and dihydroxyaromatic compounds

Abstract

A number of new condensation polymers with acetal units in the main chain and having linear and ladder-form structure and high thermal stability were synthesized by solution polycondensation of dihydroxyaromatic compounds with malonaldehydetetramethyl acetal as a reactive protected 1,3-dicarbonyl compound. Optimal conditions for polycondensation were obtained via study of the model compounds. In order to obtain high molecular weight polymers, general investigations on the influence of reaction conditions, such as monomer concentration and reaction temperature were carried out. All polymers were obtained in high yields and moderate inherent viscosity ranging from 0.25 to 0.41?dL/g. The proposed chemical structures of condensation polymers were confirmed by ¹H-NMR, ¹³C-NMR, FTIR spectroscopies, TGA, and DSC. Thermal analysis indicated that these polymers are stable up to 360?°C, and a 10% weight loss (T₁₀) were recorded on the TG curves in the temperature range of 381–411?°C in nitrogen atmosphere, indicating their good thermal stability.     

Development of Oligomeric Phthalonitrile Resins for Advanced Composite Applications

Phthalonitrile endcapped oligomers containing aromatic ether and imide linkages have been synthesized and characterized. The phthalonitrile terminated oligomers were prepared in two step (one spot) method by the reaction of an excess amount of pyromellitc dianhydride (PMDA) with aromatic diamines, in a N,N-dimethylacetamide (DMAc)/toluene solvent mixture to form anhydride terminated oligomeric intermediate that was terminated by the reaction with 4-(aminophenoxy) phthaloitrile. The average molecular weights of the prepared oligomers were determined by GPC analysis. The oligomeric phthalonitrile monomers have been converted to network polymers using 4,4'-diaminodiphenyl sulfone (DDS) (5.0 wt %) curing additive at elevated temperatures. Differential scanning calorimetric (DSC) analysis was used to follow the polymerization as the oligomeric phthalonitrile/diamine mixtures and prepolymers. An isothermal rheometric analysis was conducted to determine the complex viscosity of the prepolymers during polymerization reaction. Viscosity increases as a function of time due to crosslinking, which depends upon the concentration and reactivity of the curing agent. The TGA analysis of cured resins showed superior thermal and thermo-oxidative stability. The temperature of 10% weight loss from TGA are in the range of 498-511 °C in N₂ and 448–461 °C in air atmosphere. Char yield at 800 °C is 41.7–50.2% in air and 70.6–83.1% in N_2.     

Synthesis,characterization and kinetic computations of fullerene (C60)–CuO on the mechanism decomposition of ammonium perchlorate

CuO, C₆₀–CuO, and Al/C₆₀–CuO nanostructures were synthesized and characterized by scanning electron microscope (SEM)/energy dispersive spectrometer (EDS), X-ray diffraction (XRD) and fourier transform infrared spectroscopy (FTIR). differential scanning calorimetry (DSC)/thermogravimetric analysis (TGA) measurements were performed to study the influence of these additives on ammonium percolate (AP) thermal decomposition. From the comparison of DSC and TGA plots, the catalytic effect of CuO and C₆₀–CuO has been clearly noticed in which the lower temperature decomposition of AP was decreased from 331 °C to 315 °C, 310 °C, and 303 °C (in the presence of CuO, C₆₀–CuO, and Al/C₆₀–CuO, respectively) and the HTD was dropped from 430 °C (pure AP) to 352 °C, 335 °C, and 317 °C (for the compounds AP/CuO, AP/C₆₀–CuO, and AP/Al/C₆₀–CuO, respectively). The kinetics of the samples were investigated by isoconversional models and compared with an iterative procedure. The results of pure AP indicated a complex decomposition process involving three decomposition steps with specific reaction mechanism. The nanocatalysts incorporated in the AP have clearly affected its decomposition process in which the reaction mechanism and the number of stages were changed.     

Novel copolyesters containing naphthalene structure. I. From bis(hydroxyalkyl)naphthalate and bis[4-(2-hydroxyethoxy)aryl] compounds

Copolyesters containing naphthalene structure were synthesized from bis(hydroxyethyl)naphthalate (BHEN) or bis(hydroxybutyl)naphthalate (BHBN) and various aralkyloxy diols. The starting bis[4-(2-hydroxyethoxy)aryl] compounds were derived from a nucleophilic substitution of various bisphenols with ethylene carbonate in the presence of KI. Copolyesters having intrinsic viscosities of 0.45–0.60 dL/g were obtained by the melt polycondensation in the presence of metallic catalysts. The effect of reaction temperature and time on the formation of copolyesters were investigated to obtain an optimum condition for copolyesters manufacturing. Most copolyesters have better solubilities than polyethylene naphthalate (PEN) or polybutylene naphthalate (PBN) in aprotic solvents, such as N-methyl-2-pyrrolidone or m-cresol. The thermal properties of the copolyesters were investigated by the differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). Glass transition temperatures (T_g) of copolyesters result from BHEN were in the range of 90–141°C, and 10% weight loss in nitrogen were all above 460°C. Another series of copolyesters result from BHBN have T_g in the range of 75–135°C, and 10% weight loss in nitrogen of over 420°C. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(butylene terephthalates) modified by hydroquinone bis(2-hydroxyethyl)ether

A series of thermoplastic poly(butylene-co-hydroquinone bis(2-hydroxyethyl)ether terephthalates) (PBHT), with different molar ratios of hydroquinone bis(2-hydroxyethyl)ether (HQEE)/1,4-butanediol 9/91, 18/82 and 27/73, were synthesized via melt polycondensation. The compositions, thermodynamics and crystallization properties of the obtained copolyesters were characterized in detail by ¹H NMR, differential scanning calorimeters (DSC), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). These results showed that the PBHTs were successfully synthesized, and the incorporation of the HQEE group significantly improved thermal properties of the polymers. However, HQEE did not change the crystal structure of PBT. The T_m values of the copolymers decreased (from 208?°C to 174?°C) with increasing content of HQEE segments, on the contrary, T_g values increased (from 37?°C to 43?°C). The temperatures for 5% weight loss did not decrease and appeared at a range of 373–377?°C.     

Aqueous polymerization of acrylamide

The polymerization of acrylamide (I) initiated by a potassium bromate—thioglycollic acid (TGA) redox pair has been studied in aqueous media at 30°C in a nitrogen atmosphere. The reaction order related to the catalyst concentration (KBrO₃) was 0.501, which indicated a bimolecular mechanism for the termination reaction in the range of 1.0?3.0 × 10^?3 mole/liter. The polymerization rate varied linearly with monomer (I) concentration over the range of 1.0?5.0 × 10^?2 mole/liter. A typical behavior is observed, however, by changing the thioglycollic acid concentration. The initial rate of polymerization (Ri), as well as the maximum conversion, increases by increasing the temperature to 30°C, but the initial rate and the maximum conversion falls as the temperature rises above 30°C. The overall energy of activation is 6.218 kcal in the temperature range of 20–40°C. Water-miscible organic solvents, namely, CH₃OH and C₂H₅OH, depress the rate of polymerization.     

o-Carborane-Containing Poly(siloxane-arylacetylene)s With Thermal and Thermo-Oxidative Stabilities

A series of poly(siloxane-arylacetylene)s with o-carborane in the backbone (CB-PSOA)s were prepared by the coupling reaction between poly(siloxane-arylacetylene) (PSOA) and decaborane (B₁₀H₁₄) in the presence of CH₃CN. CB-PSOAs were characterized by Fourier-transform infrared (FT-IR) spectroscopy, nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and Pyrolysis–gas chromatography–mass spectrometry (Py–GC–MS). The results show that the average amount of carborane units in a CB-PSOA chain could be raised when the molar ratio of B₁₀H₁₄ to PSOA is increased from 0.6 to 2.4. The crosslinking reaction could be carried on at above 140°C for CB-PSOAs. The CB-PSOA thermosets show excellent thermo oxidative stability with over 85% residue yield at 1000°C in air.     

Synthesis and characterization of phthalazinone‐based poly(aryl ether ketone) derived from 4,4′‐dichlorobenzophenone

As distinguished from the conventional preparation of poly(aryl ether ketone)s utilizing 4,4′‐difluorobenzophenone, a novel synthetic method of high molecular weight poly(phthalazinone ether ketone) derived from 4,4′‐dichlorobenzophenone was studied. Reaction conditions to get high molecular weight polymer were investigated in details. Experimentally, sulfolane was chosen as the reaction media and high molecular weight polymer could be obtained in 7–8 hr at 210°C. The cyclic oligomers in the polymer product reduced to below 3.0% when the concentration of the reactant is 1.6–1.7 g/ml. Fourier transform infrared (FT‐IR), ¹H NMR, and elemental analysis were used to confirm the structure of the obtained polymer. The amorphous polymer showed reasonable solubility in selective solvent, such as chloroform and N‐methyl‐2‐pyrrolidone, and tough, flexible, and transparent thin film can be readily prepared from their N‐methyl‐2‐pyrrolidone solution. The obtained polymer showed high glass transition temperature (T_g) up to 261°C detected by differential scanning calorimetry (DSC), and the temperature of 5% weight loss under nitrogen higher than 500°C detected by thermal gravimetric analysis (TGA), indicating its excellent thermal stability. Copyright © 2011 John Wiley & Sons, Ltd.     

Structural and Electrical Properties of Sol–Gel-processed CdTiO3 Powders and Films

Cadmium titanate, CdTiO₃, was prepared by the sol–gel technique in bulk and in thin film form. The thermal evolution of the gels and the phase changes were studied by thermo- gravimetric analysis (TGA), X-ray diffractometry (XRD) and Raman and energy-dispersive (EDS) spectroscopies. The morphology of the samples was observed using scanning electron microscopy (SEM). Gels heated to 800 °C gave rise to powders with only the ilmenite-like phase. The orthorhombic perovskite phase is the only crystalline phase observed after a 4 h heat-treatment at 1100 °C. With respect to the conventional preparation method by solid-state reaction, by the sol–gel method it is possible to prepare the ilmenite phase at lower temperatures and the perovskite phase in a shorter time. Clear, homogeneous thin films were obtained by the dip-coating method. The refraction index and the thickness of the films were measured using ellipsometry. The humidity-sensitive electrical properties were measured for thin films deposited on alumina substrates with comb-type gold electrodes, heated to 200 °C and 450 °C. The films heated to 200 °C, which still contained organics, showed a variation of the resistance of six orders of magnitude in the relative humidity (RH) range tested (4–87% RH). The films heated to 450 °C, made of ilmenite-type CdTiO₃, were nearly insensitive to RH. © 1997 by John Wiley & Sons, Ltd.     

Grafting of styrene onto low molecular weight polymers and copolymers of butadiene

The grafting of styrene onto low molecular weight polybutadienes and butadiene–styrene co-polymers was studied. A mathematical method was used for the design of experiments and for the determination of the optimum grafting conditions with respect to the conversion of styrene and the efficiency of grafting. The reaction parameters were temperature (65–105°C), time (2–10 hr), concentration of the initiator, polymer to monomer ratio (10/90–90/10) and dilution by solvent (toluene). The optimum grafting conditions were chosen under which 50–60 wt-% of styrene was grafted onto backbone polymer at a high conversion of the monomer. It was found that the reactions producing graft copolymer prevailed over the styrene homopolymerization when the temperatures employed were lower (65–85°C), and the reaction time (8–10 hr), backbone polymer/monomer ratio, and the dilution by solvent were higher. The efficiency, density, and degree of grafting were found to increase with the increase in the molecular weight of the backbone polymer. The efficiencies and densities of grafting onto low molecular weight polybutedienes were higher than those of grafting onto low molecular weight butadiene–styrene copolymers. Grafting efficiencies and grafting densities were in the ranges 37.8–61.6 wt % and 0.06–0.26, respectively, in the studied range of number-average molecular weights (M?_n = 2400–6000).     

Synthesis and characterization of thermally stable poly(ether-azomethine)s derived from 1,1-bis[4-(4-benzaldehyde oxy)-3-methyl phenyl] cyclopentane

A new dialdehyde 1,1-bis[4-(4-benzaldehyde oxy)-3-methyl phenyl] cyclopentane (BBMPC) was synthesized starting from cyclopentanone and O-cresol to give 1,1-bis(4-hydroxy-3-methyl phenyl)cyclopentane (BHMPC); followed by reaction with 4-fluorobenzaldehyde in N, N-dimethyl formamide (DMF), containing anhydrous potassium carbonate. New series of poly(ether-azomethine)s were synthesized from (BBMPC) with different diamines such as 4,4′- diamino diphenyl ether (ODA); 4,4′-diaminodiphenyl methane (MDA); 4-aminophenyl sulfone (SDA); p-phenylene diamines (p-PDA), etc. in N, N’- dimethyl acetamide (DMAc) with 5 wt% LiCl by the solution polycondensation method. Inherent viscosities of these polymers were in the range 0.20 to 0.38 dL/g indicating formation of moderate molecular weights. These polymers exhibited good solubility in various polar aprotic solvents such as N-methyl-2-pyrrolidone (NMP), DMAc, DMF, etc. However some polymers showed partial solubility in DMF and DMAc. X-Ray diffraction pattern of polymers showed amorphous nature. Thermal stability was assessed by 10% weight loss temperature and the degradation temperature of the resultant polymers falls in the ranges from 444-501°C in nitrogen. The glass transition temperature was in the range of 155-205°C. The structure-property correlation among these polyazomethines were studied; in view of their potential applications as high performance polymers.