THE EFFECT OF CHAIN LENGTH OF POLYETHYLENE GLYCOL ON PROPERTIES OF CASTOR OIL BASED POLYURETHANE ELASTOMERS

ABSTRACT

Polyurethane (PU) elastomers from castor oil based polyol, polyethylene glycol (PEG) of various molecular weight (200, 400, and 600) and toluene diisocyanate were prepared in the form of transparent sheets. The sorption, mechanical and thermal properties have been studied. The solubility parameter, molecular weight between two crosslinks and degree of crosslinking of PU samples were calculated from equilibrium swelling experiments. The kinetic study of swelling revealed that sorption is anomalous in nature in all the samples. Diffusion coefficient (D) and sorption coefficient (S) were found to decrease with an increase in chain length of PEG. The stress-strain data showed that the elastomers obtained using PEG-200 gave the best mechanical properties. The thermal degradation of all elastomers starts at ～250°C, regardless of the PEG chain length. The values of activation energy of degradation were in the range of 60–72 kJ/mole.     

Mechanical and thermo‐mechanical studies of double networks based on thermoplastic elastomers

A new approach to prepare and characterize double network elastomeric systems was investigated. A styrene‐ethylene‐co‐butylene‐styrene (SEBS) triblock copolymer system containing physical crosslinks was used to achieve a double network by additional crosslinking using ultra‐violet (UV) light. An ethylene–propylene–diene monomer (EPDM) terpolymer system containing chemical crosslinks was used to achieve a conventional double network using UV crosslinking. Properties from conventional monotonic tensile tests, dynamic mechanical analysis, and thermomechanical properties were investigated. These double network elastomers show a transition between competitive and collaborative behavior in their mechanical properties and lower coefficients of thermal expansion arising from a competition of the networks. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 778–789, 2010     

Interpenetrating Polymer Networks of Uralkyd Resin Based on Hydrogenated Castor Oil and Poly(Butyl Acrylate)

Abstract

Semi‐ and full‐interpenetrating polymer networks (IPNs) of uralkyd (UA) resin based on hydrogenated castor oil and poly(butyl acrylate) (PBA) were prepared by the sequential mode of synthesis. These IPNs were characterized for their resistance to thermal behavior, swelling (%), and mechanical properties. The morphology of the IPNs was studied by scanning electron microscopy (SEM). The effect of the variations of the blend ratios on the above‐mentioned properties was examined. The mechanical properties significantly enhanced by increasing UA component in the blend. Full‐IPNs exhibited higher apparent densities, mechanical properties, and thermal stability than the corresponding semi‐IPNs.     

Novel polycarbonate-based polyurethane elastomers: Composition–property relationship

Novel all-aliphatic polycarbonate-based polyurethane (PC-PU) elastomers, as well as PC-PU nanocomposites filled with organic-modified clays were synthesized, characterized and studied. It was found that they have very attractive mechanical properties (e.g., elongation at break between 600% and 800%). The prepared PC-PUs possess a distinctly segmented structure, which is the key prerequisite for their behavior as strong physical rubbery networks. All synthesized materials melt at elevated temperatures (between 110 and 200 °C) and hence can be processed like normal thermoplastics. The dispersion of the clay nanofiller was achieved by its one day swelling in the alcohol and a brief successive stirring. This procedure is very successful and leads to a partial exfoliation of the clay (documented by X-ray diffraction and TEM). The best nanocomposites with very good tensile properties, particularly with significantly increased moduli were obtained using the bentonite nanofiller. The study shows that the nanofiller interacts strongly with the hard domains and influences their melting temperature (DMTA and DSC), but it does not affect the glass transition temperature of soft domains. While Cloisite 15A was found to interact preferentially with the hard domains, the organic modified bentonite shows a strong interaction with both soft and hard segments, behaving as a blending agent. Hard domains in neat matrices, formed by hydrogen bonding of hard segments, were practically invisible by X-ray or TEM, but were successfully detected by AFM. Besides excellent mechanical properties, the prepared elastomers and their nanocomposites showed an interesting phase behavior (which was studied by combining DMTA and modulated DSC).     

Synthesis and properties of biodegradable elastomeric epoxy modified polyurethanes based on poly(ε-caprolactone) and poly(ethylene glycol)

Biodegradable polyurethane elastomers with potential for applications in medical implants with tunable degradation rate and physical properties were synthesized from reaction of epoxy terminated polyurethanes (EUP) with 1,6-hexamethylene diamine (HMDA) as curing agent. Poly(ε-caprolactone) (PCL) and poly(ethylene glycol) (PEG) as well as 1,6-hexamethylene diisocyanate (HDI) were used for preparation of isocyanate terminated polyurethanes which were subsequently blocked with glycidol to prepare EUPs. All materials were characterized by conventional methods, and their properties were studied fully. Results showed that elastomers based on PEG exhibit superior degradation rate and inferior mechanical properties in comparison to elastomers based on PCL. Optimum degradation rate and mechanical properties were obtained from elastomers made from mixture of PCL and PEG base EUPs.     

Sulfonation of metallocene‐based polyolefinic elastomers and its influence on physicomechanical properties: Effect of reaction parameters,styrene grafting,and pendant chain length

Direct sulfonation and styrene‐mediated sulfonation were carried out onto metallocene‐based poly(ethylene‐co‐octene) (POE) and poly(ethylene‐co‐butene) (PBE) elastomers to impart polarity on the completely nonpolar rubbery matrices and to prepare a new class of elastomer. The influence of styrene‐grafting and pendant chain length on the degree of sulfonation was also studied. The effects of sulfonation, styrene grafting and styrene‐mediated sulfonation at their optimized levels on various physicomechanical properties were thoroughly investigated, and the resultant properties were correlated with structures of the modified elastomers. Higher extent of sulfonic acid groups were introduced through direct sulfonation in comparison with the styrene‐mediated sulfonation, whereas better thermal and mechanical properties were obtained through styrene‐mediated sulfonation in comparison with the direct sulfonation process. PBE had shown higher degree of sulfonation and percentage grafting than POE. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8023–8040, 2008     

The swelling behaviour of siloxane elastomers in relation to their microscopic structure

Swelling experiments have been performed in order to characterize elastomer networks. The value of the interaction parameter χ of the Flory‐Rehner equation has been evaluated. We were particularly interested in equilibrium swelling and the kinetics of swelling when the solvent was of the same nature as the network polymer; a siloxane fluid in a siloxane elastomer. Now, the swelling capacity of elastomers can easily be predicted and this is of particular importance in relation to their formulation. The swelling experiments also revealed a more complex kinetics than expected. We relate this kinetics to the self‐bleeding process and give an interpretation based on the network microstructure. Finally, some data from electron microscopy in relation to light and neutron scattering and also results of a thermoporometry study of the elastomers are discussed.     

PEGylated poly(ester amide) elastomer scaffolds for soft tissue engineering

Biodegradable synthetic elastomers with tunable mechanical and physicochemical properties remain attractive materials for soft tissue engineering. We have recently synthesized novel poly(1,3‐diamino‐2‐hydroxypropane‐co‐glycerol sebacate)‐co‐poly(ethylene glycol) (APS‐co‐PEG) biodegradable elastomers. This class of PEGylated elastomers has widely tunable mechanical and degradation properties compared wtih currently available biodegradable elastomers. To further investigate the biological application of this class of elastomers, we fabricated hybrid APS‐co‐PEG/polycaprolactone (PCL) porous scaffolds by electrospinning. The fiber morphology, chemical composition, mechanical properties, degradability, and cytocompatibility of hybrid APS‐co‐PEG/PCL electrospun scaffolds were characterized. These scaffolds exhibited a wide range of mechanical properties and similar cytocompatibility to PCL scaffolds. Importantly, PEGylation inhibited platelet adhesion on all APS‐co‐PEG/PCL electrospun scaffolds when compared with PCL and APS/PCL scaffolds, suggesting a potential role in mitigating thrombogenicity in vivo. Additionally, APS‐25PEG/PCL scaffolds were found to be mechanically analogous to human heart valve leaflet and supported attachment of human aortic valve cells. These results reveal that hybrid APS‐co‐PEG/PCL scaffolds may serve as promising constructs for soft tissue engineering, especially heart valve tissue engineering. Copyright © 2017 John Wiley & Sons, Ltd.     

Semi‐interpenetrating polymer networks composed of poly(N‐isopropyl acrylamide) and polyacrylamide hydrogels

Three series of semi‐interpenetrating polymer networks, based on crosslinked poly(N‐isopropyl acrylamide) (PNIPA) and 1 wt % nonionic or ionic (cationic and anionic) linear polyacrylamide (PAAm), were synthesized to improve the mechanical properties of PNIPA gels. The effect of the incorporation of linear polymers into responsive networks on the temperature‐induced transition, swelling behavior, and mechanical properties was studied. Polymer networks with four different crosslinking densities were prepared with various molar ratios (25:1 to 100:1) of the monomer (N‐isopropyl acrylamide) to the crosslinker (methylenebisacrylamide). The hydrogels were characterized by the determination of the equilibrium degree of swelling at 25 °C, the compression modulus, and the effective crosslinking density, as well as the ultimate hydrogel properties, such as the tensile strength and elongation at break. The introduction of cationic and anionic linear hydrophilic PAAm into PNIPA networks increased the rate of swelling, whereas the presence of nonionic PAAm diminished it. Transition temperatures were significantly affected by both the crosslinking density and the presence of linear PAAm in the hydrogel networks. Although anionic PAAm had the greatest influence on increasing the transition temperature, the presence of nonionic PAAm caused the highest dimensional change. Semi‐interpenetrating polymer networks reinforced with cationic and nonionic PAAm exhibited higher tensile strengths and elongations at break than PNIPA hydrogels, whereas the presence of anionic PAAm caused a reduction in the mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3987–3999, 2004     

Synthesis and characterization of poly(dimethylsiloxane‐urethane) elastomers: Effect of hard segments of polyurethane on morphological and mechanical properties

A series of poly(dimethylsiloxane‐urethane) elastomers based on hexamethylenediisocyanate, toluenediisocyanate, or 4,4′‐methylenediphenyldiisocyanate hard segment and polydimethylsiloxane (PDMS) soft segment were synthesized. In this study, a new type of soft‐segmented PDMS crosslinker was synthesized by hydrosilylation reaction of 2‐allyloxyethanol with polyhydromethylsiloxane, using Karstedt's catalyst. The synthesized soft‐segmented crosslinker was characterized by FT‐IR, ¹H, and ¹³C NMR spectroscopic techniques. The mechanical and thermal properties of elastomers were characterized using tensile testing, thermogravimetric analysis, differential scanning calorimetry (DSC), and dynamical mechanical analysis measurements. The molecular structure of poly(dimethylsiloxane‐urethane) membranes was characterized by ATR‐FTIR spectroscopic techniques. Infrared spectra indicated the formation of urethane/urea aggregates and hydrogen bonding between the hard and soft domains. Better mechanical and thermal properties of the elastomers were observed. The restriction of chain mobility has been shown by the formation of hydrogen bonding in the soft and hard segment domains, resulting in the increase in the glass‐transition temperature of soft segments. DSC analysis indicates the phase separation of the hard and soft domains. The storage modulus (E′) of the elastomers was increasing with increase in the number of urethane connections between the hard and soft segments. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2980–2989, 2006     

A new strategy to characterize the extent of reaction of thermoset elastomers

A new method for determining the extent of reaction of thermoset elastomers was developed based on equilibrium swelling and dynamic mechanical analysis (DMA). The extent of reaction was defined based on the molecular weight between crosslinks (M_c) of a polymer sample in relation to M_c at the onset of gelation and at complete reaction. The molecular weight between crosslinks was measured using equilibrium swelling, whereas rheology and DMA were used to determine the exact point of gelation and reaction completion, respectively. The extent of reaction of poly(1,8‐octanediol‐co‐citrate) at various polymerization conditions was investigated and this method was used to study the relationship between mechanical properties, molecular weight between crosslinks, and extent of reaction. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1318–1328, 2008     

The compatibilizing effect of epoxy resin (EP) on polypropylene (PP)/recycled acrylonitrile butadiene rubber (NBRr) blends

A new method was used to prepare thermoplastic elastomers based on polypropylene (PP)/recycled acrylonitrile butadiene rubber (NBRr) with improved mechanical properties. An epoxy resin (EP) was used as a compatibilizing agent. The effect of EP on mechanical properties, swelling percentage and morphological characteristics of the blends was investigated with different blend compositions. The results showed that the incorporation of EP has improved the tensile strength, Young's modulus and elongation at break of PP/NBRr-EP blends compared with PP/NBRr blends. The enhancement of tensile properties of PP/NBRr-EP blends is due to the better adhesion between the two phases with the incorporation of EP. This is quite evident by scanning electron microscopy of tensile fractured surfaces. PP/NBRr-EP blend exhibits lower stabilization torque and swelling percentage than PP/NBRr blends. The lower stabilization torque is an indication of better processing characteristics.     

Microstructural PALS study of regulated dimethacrylates: Thiol‐ versus β‐allyl sulfone‐based networks

Radical photocuring of multifunctional (meth)acrylates is lacking control over the irregular chain growth process yielding highly crosslinked, inhomogeneous networks. Chain transfer agents (CTAs, e.g., thiols or β‐allyl sulfones) have been widely used to modify this curing process, thus reducing shrinkage stress and increasing the toughness of the formed photopolymers. Resulting photopolymer networks exhibit higher bulk density, lower crosslinking density, and narrow glass transitions. Consequently, a more homogeneous network structure was postulated for those networks. Whereas macroscopic properties of the modified final materials have already been studied, herein the microstructural arrangement of such modified networks has also been evaluated with the help of positron annihilation lifetime spectroscopy (PALS). A more homogenous network structure with a decreased average free‐volume void size was confirmed for CTA‐based dimethacrylate networks. A sharper distribution of the ortho‐positronium (o‐Ps) lifetime, mainly for the β‐allyl sulfone‐based photopolymers, hints toward a more regulated network structure. Moreover, the combination of PALS, DMTA, density and swelling experiments elucidates relations between void formation, crosslinking density and macroscopic characteristics such as shrinkage stress and mechanical properties. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2476–2484     

New developments and directions in the area of elastomers and rubberlike elasticity

There are number of important developments in the area of elastomeric polymers, including (i) network chains of controlled stiffness, (ii) model elastomers (including dangling-chain networks), (iii) fluorosiloxane elastomers, (iv) new thermoplastic elastomers, (v) other new elastomers, (v) bimodal network chain-length distributions, (vi) cross linking in solution or in a state of deformation, and (vii) gel collapse. Interesting elastomeric composites include those with (i) in-situ generated ceramic-like particles, (ii) ellipsoidal fillers, (iii) clay-like layered fillers, (iv) polyhedral oligomeric silsesquioxane (POSS) particles, (v) porous fillers, (vi) elastomeric domains modifying ceramics, and (vii) controlled interfaces. New characterization techniques are being developed for elastomers, and there have been new developments in elasticity theory and in elastomer processing. Some examples of societal aspects of relevance are (i) synthesis of elastomers in environmentally-friendly solvents, (ii) biosynthesis, (iii), recyclability, (iv) improved adhesion to tire cords, and (v) better barrier properties in anti-terrorism clothing. Educational topics include curriculum development, and mobile laboratories for elastomer experiments and demonstrations.     

A facile and controllable synthesis of dual‐crosslinked elastomers based on linear bifunctional polydimethylsiloxane oligomers

Dual‐crosslinked supramolecular elastomers with the hybrid network consisting of hydrogen bonds and covalent bonds combine the reversibility of hydrogen bond and mechanical properties of covalent crosslinking network. In this article, isocyanate mixture is used as curing agent to prepare dual‐crosslinked elastomer based on bifunctional polydimethylsiloxane under mild condition. This method can effectively build up a hybrid network with the designed structure. A series of elastomers with same hydrogen bond density and variable covalent crosslinking degree are obtained. Swelling measurements and ¹H‐NMR spectra confirm the feasibility and controllability of curing method, the increasing of bifunctional isocyanate give rise to higher covalent crosslinking degree, improving the solvent resistance. The studies on viscoelastic property show that the introduction of an irreversible covalent crosslinking network stabilize the hybrid network, restrain the chain movement. The mechanical and self‐healing property studies reveal that the covalent crosslink significantly reinforce the whole network, while the reparable strength seems to mainly depend on the hydrogen bond density. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3760–3768     

Effect of Sodium Alginate on the Properties of Thermosensitive Hydrogels

Sodium alginate (SA ) was combined with poly(N ‐isopropylacrylamide) (PNIPAAm ) to prepare thermosensitive hydrogels through semi‐interpenetrating polymer network (semi‐IPN ) and fully interpenetrating polymer network (full‐IPN ). The thermosensitive, swelling, mechanical, and thermal properties of pure PNIPAAm , SA /PNIPAAm semi‐IPN , and Ca‐alginate/PNIPAAm full‐IPN hydrogels were investigated. The formation of semi‐IPN and full‐IPN significantly improved the hydrogels’ swelling capability and mechanical properties without altering their thermosensitivity. 5‐Fluorouracil (5‐Fu) was selected as a model drug to study the release behaviors of the hydrogels. It was found that in vitro controlled drug release from semi‐IPN hydrogels showed an initial release burst, followed by a slower and sustained release, before reaching equilibrium. Full‐IPN hydrogels showed slow and sustained release during the whole process. Temperature and pH were found to affect the rate of drug release. Ca‐alginate/PNIPAAm full‐IPN hydrogels have potential application as drug delivery matrices in controlled drug release.     

Photochromic Inorganic/Organic Thermoplastic Elastomers

Photochromic materials are an important class of “smart materials” and are broadly utilized in technological devices. However, most photochromic materials reported so far are composed of inorganic compounds that are challenging to process and suffer from poor mechanical performance, severely limiting their applications in various markets. In this paper, inorganic photochromic tungsten trioxide (WO₃) nanocrystals are conveniently grafted with polymers to hurdle the deficiency in processability and mechanical properties. This new type of photochromic material can be thermally processed into desired geometries like disks and dog‐bone specimens. Fully reversible photochromic response under UV light is also achieved for WO₃‐graft polymers, exhibiting tunable response rate, outperforming the pristine WO₃ nanocrystals. Notably, the resulted graft polymers show extraordinary mechanical performance with excellent ductility (≈800% breaking strain) and relatively high breaking strength (≈2 MPa). These discoveries elucidate an effective pathway to design smart inorganic/organic hybrid thermoplastic elastomers endowed with outstanding photochromic and mechanical properties as well as exceptional processability.     

Supramolecular Silicone Elastomers with Healable and Hydrophobic Properties Crosslinked by “Salt‐Forming Vulcanization”

In this article, supramolecular silicone elastomers with self‐healing function were first prepared by simple and controllable “salt‐forming vulcanization” of polyaminopropylmethylsiloxane with acids. Their structures and micrographs were verified by Fourier transform infrared spectra, Small‐angle X‐ray scattering experiments and atomic force microscope. The experimental results showed that the ion‐association complexes were formed during vulcanization, and the obtained elastomers displayed self‐healing and good mechanical properties even if the cross‐linking agent was excessed. The thermogravimetric analysis showed that the elastomers crosslinked by inorganic acid were stable under high temperature. Unexpectedly, bionic structures were observed in the elastomers, which further changed the hydrophobicity of the surfaces of the elastomers physically. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 903–911     

Synthesis and characterization of a series of side chain chiral smectic liquid crystalline elastomers

A series of new chiral smectic liquid crystalline elastomers was prepared by graft polymerization of a nematic monomer with a chiral and non‐mesogenic crosslinking agent, using polymethylhydrosiloxane as backbone. The chemical structures of the monomers and polymers obtained were confirmed by FTIR and ¹H NMR. The mesomorphic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy and X‐ray diffraction. Monomer M ₁ showed a nematic phase during heating and cooling. Polymer P ₀ exhibited a smectic B phase; elastomers P ₁–P ₃ showed the smectic A phase, P ₄–P ₆ showed a chiral smectic C(SmC*), and P ₇ displayed stress‐induced birefringence. Elastomers containing less than 15?mol?% M ₂ displayed elasticity, reversible phase transitions with wide mesophase temperature ranges, and high thermal stability. With increasing content of the crosslinking unit, glass transition temperatures first increased, then fell, then increased again; isotropization temperatures and mesophase temperature ranges steadily decreased.     

BODIPY: A Highly Versatile Platform for the Design of Bimodal Imaging Probes

In molecular imaging, multimodal imaging agents can provide complementary information, for improving the accuracy of disease diagnosis or enhancing patient management. In particular, optical/nuclear imaging may find important preclinical and clinical applications. To simplify the preparation of dual‐labeled imaging agents, we prepared versatile monomolecular multimodal imaging probe (MOMIP) platforms containing both a fluorescent dye (BODIPY) and a metal chelator (polyazamacrocycle). One of the MOMIP was conjugated to a cyclopeptide (i.e., octreotide) and radiolabeled with ¹¹¹In. In vitro and in vivo studies of the resulting bioconjugate were conducted, highlighting the potential of these BODIPY‐based bimodal probes. This work also confirmed that the biovector and/or the bimodal probes must be chosen carefully, due to the impact of the MOMIP on the overall properties of the resulting imaging agent.