Preparation of polypyrrole (PPy)-derived polymer/ZrO2 nanocomposites

New polypyrrole (PPy)-derived polymer/ZrO₂ nanocomposite materials are prepared by single-step oxidative polymerization of pyrrole (Py) and/or N-methylpyrrole (mPy) in the presence of HCl-functionalized ZrO₂ nanoparticles and ammonium persulfate. The physicochemical features of the PPy–ZrO₂, poly(Py-co-mPy)–ZrO₂ and PmPy–ZrO₂ hybrids were analyzed by XPS, FTIR, XRD and UV–Vis techniques. To explore the advantages of these nanocomposites for potential applications, their thermal, conductive and electrochemical properties were investigated. The characterization reveals that a chemical bonding, based on electrostatic interactions, is established between the polymers and the ZrO₂ nanoparticles. Interestingly, it is found that the growth of polymer on the surface of Cl-functionalized ZrO₂ becomes more significant as the Py moiety (–NH– species) content in the polymer increases. The thermal stability and conductivity of the polymers increase by hybridization with the ZrO₂ nanoparticles. This is assigned to the affective interaction of the polymers with the ZrO₂ nanoparticles. Particularly, the resulting nanocomposites keep high conductivities, ranging between 0.323 and 0.929 S cm⁻¹. Finally, voltammetric characterization shows that the PPy–ZrO₂ and poly(Py-co-mPy)–ZrO₂ nanocomposites are electroactive, thus demonstrating their capability for electrochemical applications. These results highlight the great influence of the nanoparticle interface and the nature of monomer on the nanocomposite formation and properties.

     

One Dinuclear Copper(II) Polymer Based on <Emphasis Type="Italic">N</Emphasis>-(Pyridine-3-Sulfonyl Amino)-Acetate: Synthesis,Structure, and Magnetic Analysis

The reaction of CuCl₂ · 2H₂O with N-(pyridine-3-sulfonyl amino)-acetate (H₂L) in ethanol, water and 4,4′-Bipy under solvothermal conditions leads to the formation of a dinuclear copper polymer {[Cu₂(L)₂(4,4′-Bipy)(H₂O)₂] · H₂O · CH₃OH} _n (I). The polymer was characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, and X-ray single-crystal diffraction (CIF file CCDC no. 1543747). The results showed that polymer belongs to the triclinic system, \(P\bar 1\) space group. TG curve shows that polymer I first removes water molecules, and then the ligand split for polymers I, and the remained residue is CuO. The magnetic measurement reveals the N-(pyridine-3-sulfonyl amino)-acetate as bridge ligand can mediate the antiferromagnetic coupling interaction between magnetic centers.     

Solubility and transport of water vapor in some 6FDA-based polyimides

Permeability, diffusion, and solubility coefficients for H₂O vapor in four different 6FDA-based polyimides were determined at temperatures between 25 and 45°C and over a wide range of relative humidities. The solubility of H₂O vapor in some of the polyimides studied can be described by the “dual-mode sorption” model whereas in other polyimides it is represented by the Flory-Huggins equation, which suggests that the latter polymers are plasticized by H₂O. The solubility of H₂O vapor in the polyimides decreases as the temperature is raised and increases with increasing polarity of the polymer. The diffusion coefficients for H₂O in the polyimides studied either increase or pass through a weak maximum with increasing H₂O activity, or concentration in the polymers. The latter behavior is probably due to a clustering of H₂O molecules in the polyimides at higher H₂O activities or concentrations. The diffusion coefficients for H₂O decrease as the chain-packing density of the polyimides increases. The permeability coefficients for H₂O vapor in 6FDA-based polyimide membranes either increase slightly or are constant as the H₂O activity is increased. The experimental values of the permeability coefficients are consistent with the values determined from diffusion and solubility coefficients. The permeability of the polyimides to H₂O vapor appears to be controlled by the solubility of H₂O in the polymers. The polyimides studied exhibit a very high selectivity for H₂O vapor relative to CH_4, and therefore are potentially useful membrane materials for the dehydration of natural gas. ©1995 John Wiley & Sons, Inc.     

Polyamides with pendant 1,3,4-oxadiazole and pyridine moieties

A novel aromatic diamine,2-（5-（3,5-diaminophenyl）-l,3,4-oxadiazole-2-yl）pyridine（POBD）,containing a pyridine ring and a 1,3,4-oxadiazole moiety,was synthesized.It was used in a polycondensation with various aromatic and aliphatic diacid chlorides to generate a series of new aromatic polyamides with pendant 1,3,4-oxadiazole groups.The prepared polyamides were characterized by IR,elemental analysis and through the synthesis of model compounds.Thermophysical properties of the synthesized polyamides have been studied by DSC,TGA and inherent viscosity measurements. Relatively high inherent viscosity values（0.76-1.62 dL/g,in 0.125%H₂SO₄ at 25℃） were observed for these compounds. Number average molecular weight（M_n） of the polymers was measured by vapor phase osmometry（VPO）.The introduction of bulky side chains in the structure of aromatic polyamides led to increased solubility of these polymers in common polar and aprotic solvents,such as DMF,DMSO,NMP and DMAc,which allowed thin films to be cast from polymer solutions. The highest molecular weight（M_n = 51190） was observed for polymer（DC）,which was prepared from pyridine-2,6-dichlorocarbonyl.     

One Trinuclear Copper(II) Polymer Based on Pyridine-2,4,6-Tricarboxylic Acid: Synthesis,Structure, and Magnetic Analysis

The reaction of CuCl₂ · 2H₂O with pyridine-2,4,6-tricarboxylic acid (H₃Pyta) in ethanol and water under hydrothermal synthesis conditions leads to the formation of a trinuclear copper polymer {[Cu₃(Pyta^3–)₂(H₂O)₈] · 4H₂O}n (I) (C₁₆H₂₈N₂O₂₄Cu₃, Mr = 823.05, ρ_calcd = 1.955 g cm^–3). The polymer was characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, and X-ray single-crystal diffraction (СIF file CCDC no. 1525203). The result showed that I belongs to the monoclinic system, P2₁/c space group. TGA curve shows that polymer I first removes water molecules, and then the ligand split for polymer I, and the remained residue is CuO. The magnetic measurement reveals the pyridine-2,4,6-tricarboxylic acid as bridge ligand can mediate the antiferromagnetic coupling interaction between magnetic centers.     

Electric Double‐Layer Capacitor Based on an Ionic Clathrate Hydrate

Herein, we suggest a new approach to an electric double‐layer capacitor (EDLC) that is based on a proton‐conducting ionic clathrate hydrate (ICH). The ice‐like structures of clathrate hydrates, which are comprised of host water molecules and guest ions, make them suitable for applications in EDLC electrolytes, owing to their high proton conductivities and thermal stabilities. The carbon materials in the ICH Me₄NOH ? 5 H₂O show a high specific capacitance, reversible charge–discharge behavior, and a long cycle life. The ionic‐hydrate complex provides the following advantages in comparison with conventional aqueous and polymer electrolytes: 1) The ICH does not cause leakage problems under normal EDLC operating conditions. 2) The hydrate material can be utilized itself, without requiring any pre‐treatments or activation for proton conduction, thus shortening the preparation procedure of the EDLC. 3) The crystallization of the ICH makes it possible to tailor practical EDLC dimensions because of its fluidity as a liquid hydrate. 4) The hydrate solid electrolyte exhibits more‐favorable electrochemical stability than aqueous and polymer electrolytes. Therefore, ICH materials are expected to find practical applications in versatile energy devices that incorporate electrochemical systems.     

高分子/单链高分子纳米粒子复合体系中的界面性质

高分子与纳米粒子复合是改善高分子材料性能的有效途径.近20年来关于高分子/纳米粒子复合物的研究引起了学术界广泛的兴趣.然而由于此类体系中的影响因素复杂,虽然学者们在相关材料性能的研究方面取得了重要进展,但是相关理论的发展却相对滞后,其中一个重要原因是实验上表征手段的缺失,导致对体系中纳米粒子与本体高分子链相互作用规律的认识(尤其是两者界面性质的认识)不够.本文总结和阐述了我们近几年利用分子动力学模拟技术研究高分子/单链高分子纳米粒子复合体系的主要结果,并围绕此类复合体系中的界面结构及动力学性质,讨论并总结了纳米粒子对本体高分子链的作用范围及影响规律,指出单链纳米粒子对熔体链的作用范围与纳米粒子的自身尺寸相当,而与熔体高分子链的分子量没有直接的关系.该结论将为纳米复合体系高分子理论的发展提供重要参考.     

Photolysis of light-transforming polymer material

Light-transforming polymer materials activated with the compositions on the basis of the europium carboxylates with different ligands and anthranilic acid exhibiting the intense luminescence in the spectral range 400–700 nm are prepared. It is shown that light stability of polymer materials on the basis of the aboveprepared compositions is higher than of polymer materials activated with the europium salts. The photolysis of luminescent polymers was studied. For the compositions EuL₃C₁₃H₁₃N₃·xH₂O + anthranilic acid gradual increase in the luminescence intensity of the europium ion is marked.     

An Efficient Method for Chemoselective Reduction of Nitro Compounds Using Bimetallic Fe‐Ni NPs/H3PW12O40.×H2O System

The selective reduction of nitro compounds by treatment with bimetallic Fe‐Ni nanoparticles (NPs) and tungestophosphoric acid hydrate (H₃PW₁₂O₄₀.×H₂O) in H₂O is reported. The method has been applied to a broad range of nitro compounds with different sensitive functionalities, including halides, carbonyl, hydroxyl, aldehyde, methyl, acetyl, nitrile, and ester substituents with excellent yields. The reaction yielded single product in all cases with very high yield. The simple experimental procedure and easy purification make the protocol advantageous.     

Plasma polymerization of some organic compounds and properties of the polymers

Plasma polymerizations (under 13.5-MHz radiofrequency inductively coupled glow discharge) of some organic compounds are investigated by their properties (elemental analysis, surface energy, and infrared spectra) and their relations to the concentrations of free radicals in the polymers as detected by electron spin resonance (ESR) spectroscopy. Monomers that have been investigated are hexamethyldisiloxane, tetrafluoroethylene, acetylene, acetylene/N₂, acetylene/H₂O, acetylene/N₂/H₂O, allene, allene/N₂, allene/H₂O, allene/N₂/H₂O, ethylene, ethylene/N₂, ethylene oxide, propylamine, allylamine, propionitrile, and acrylonitrile. Plasma-polymerized polymers generally contain oxygen, even if the starting monomers do not contain oxygen. This oxygen incorporation is related to the free-radical concentration in the polymer. Molecular nitrogen copolymerizes with other organic monomers such as acetylene, allene, and ethylene, and their properties are very similar to those of plasma-polymerized polymers from nitrogen-containing compounds such as amines and nitriles. The addition of water to the monomer mixture reduces in a dramatic manner the concentration of free radicals in the polymer and consequently the oxygen-incorporation after the polymer is exposed to air. The concentrations of free radicals (by ESR) are directly correlated to the change of the properties of plasma-polymerized polymers with time of exposure to the atmosphere. These changes are primarily the introduction of carbonyl (and possibly hydroxyl) groups. The addition of water to the plasma introduces these groups during the polymerization.     

A Luminescent Zinc(II) Coordination Polymer for Selective Detection of Fe3+ and Cr2O72− in Water and Catalytic CO2 Fixation

Fluorescence-based detection technique using coordination polymer has been considered an attractive alternative over conventional approaches. Herein, a new luminescent zinc(II) coordination polymer, [Zn(4-ABPT)(NIPA)(H₂O)], SSICG-5 , is synthesized by using a Lewis acidic Zn(II) ion, aromatic nitro group containing ligand 5-nitroisophthalic acid (H₂NIPA), and basic −NH₂ rich ligand 3,5-di(pyridine-4-yl)-4H-1,2,4-triazol-4-amine (4-ABPT). SSICG-5 can detect Fe³⁺ and Cr₂O₇²⁻ selectively with a LOD of 0.16 μM and 1.94 μM, respectively. Additionally, carbon dioxide (CO₂) fixation via one-pot CO₂ cycloaddition reaction has significant importance for reduced waste formation, minimizing reaction time and lowering chemical usage. Zn metal centre of SSICG-5 possesses a replaceable coordinated water molecule. The active metal sites combined with the Lewis acidic and basic sites of the ligands make SSICG-5 an ideal bifunctional heterogeneous catalyst for efficient CO₂ cycloaddition reaction under room temperature (RT), solvent-free conditions. Notably, SSICG-5 exhibits near quantitative conversion (turnover number (TON) of 198) of propylene oxide to its carbonate compound under mild reaction conditions.     

A new 3-D microporous Ln(III)–Cu(I) framework constructed by pyridine-3,5-dicarboxylate

A new 3-D lanthanide-transition metal coordination polymer [LaCu(PDC)₂H₂O] _n (1) was hydrothermally synthesized from pyridine-3,5-dicarboxylic acid (H₂PDC) and characterized by single-crystal X-ray diffraction, IR spectroscopy, and thermal gravimetric analysis (TGA). The microporous framework of 1 can be viewed as constructed by planar binuclear Cu₂(PDC)₄ building blocks and La(III) chains, a new structural motif in 3d-4f heterometallic coordination polymers. The sample exhibits strong blue emission in the solid state and retains its framework integrity up to ca 380°C.     

Membrane structure control of BTDA-TDI/MDI (P84) co-polyimide asymmetric membranes by wet-phase inversion process

The formation process and morphology of BTDA-TDI/MDI co-polyimide (P84, CAS#: 58698-66-1) asymmetric flat sheet membranes have been studied. Experimental results indicated that the weight ratio of H₂O and N-methyl-2-pyrrolidone (NMP, CAS#: 872-50-4) at cloud point curve (above critical point) was a constant (7.66/92.34 (w/w)) for the P84/NMP/H₂O system. For two different casting solutions (21 wt.% P84 in pure NMP; 15 wt.% P84 in H₂O/NMP: 6.0/94.0 (w/w)), the approaching ratio α strongly dominated the formation of finger-like structure rather than the viscosity of casting solution. The formation of finger-like structure in P84 co-polyimide asymmetric membranes was due to the hydrodynamically unstable viscous fingering developed when the casting solution was displaced by a polymer-lean phase. Three types of membrane morphologies, finger-like structure, transition structure and sponge-like structure can be expected with various approaching ratio α of casting solutions. The critical approaching ratio α^* was initially defined to describe the sharp change of membrane morphology from finger-like to sponge-like structure. The casting temperature also influenced the membrane morphology. For some casting solutions (e.g. 15 wt.% P84 in H₂O/NMP: 6.4/93.6 (w/w)), the membrane morphology changed from sponge-like to finger-like structure with an increase in casting temperature. Meanwhile, the critical approaching ratio α^* also increased with an increase in casting temperature.     

Synthesis, crystal structure and properties of two 1D nano-chain coordination polymers constructed by lanthanide with pyridine-3,4-dicarboxylic acid and 1,10-phenanthroline

The hydrothermal reactions of LnCl₃·6H₂O (Ln=Eu, Tb), pyridine-3,4-dicarboxylic acid (3,4-pydaH₂), 1,10-phenthroline (phen) and NaOH in aqueous medium yield two metal-organic hybrid materials, [Eu₂(3,4-pyda)₃(phen)(H₂O)·H₂O]_n (1) and [Tb₂(3,4-pyda)₃(phen)(H₂O)·H₂O]_n (2), respectively. Both compounds have similar topology structure containing one-dimensional nano-chain, which is further assembled into a three-dimensional supramolecular network via π-π stacking interactions and hydrogen bonds. To the best of our knowledge, they represent the first example of nano-chain coordination polymers constructed by 3,4-pydaH₂ and chelate heterocylic ligand. Interestingly, the 3,4-pyda anion exhibits three kinds of coordination modes in these complexes. The coordination modes of 3,4-pyda in complexes 1 and 2 have not been observed in other coordination polymers containing 3,4-pyda ligands. Compounds 1 and 2 exhibit strong fluorescent emission bands in the solid state at room temperature. Their magnetic analyses show that they exhibit different magnetic interactions.     

Synthesis and Characterization of Nitrobenzoylthiourea Derivatives as Potential Conductive Biodegradable Thin Films

Abstract

The application of thiourea derivatives as conjugated molecular wire candidates in the field of material sciences has attracted great attention recently. To date, conjugated thiourea systems as molecular wires are surprisingly unexplored although the well-known rigid π-systems promise a wide range of electronic properties. Due to this matter, five novel thiourea derivatives A-ArC(O)NHC(S)NHAr-D with polar head and tail groups, namely NO₂ (acceptor A) and alkoxy with varying chain lengths (donor D = OC_nH_2n+1, n = 6, 7, 8, 9, 10), were successfully synthesized and characterized. All compounds were characterized by IR, UV-vis, ¹H and ¹³C NMR spectroscopy, and CHNS elemental microanalysis. The investigation of their potential as dopant systems in polymer conducting films has been accomplished by incorporating of chitosan via the solution casting technique. The conductivity values were obtained using impedance spectroscopy. They show that the ionic conductivities of the N-(4-alkoxyphenyl)-N’-(4-nitrobenzoyl)thioureas increase with increasing chain length of the alkoxy chain. The compounds exhibit great potential for the exploration of future applications as doping systems in conductive materials.     

Electrochemical Synthesis of MII Complexes with a Schiff Base containing an Amido Group. Crystal Structure of a Cobalt(II) Complex with a Reorganised Ligand

M(HL)(H₂O)_n complexes have been obtained by the electrochemical reaction of Fe, Co, Ni, Cu, Zn and Cd anodes with the potentially pentadentate and trianionic asymmetrical Schiff base 3‐aza‐N‐{2‐[1‐aza‐2‐(5‐nitro‐2‐hydroxylphenyl)‐vinyl]phenyl}‐4‐(5‐nitro‐2‐hydroxyphenyl)but‐3‐enamide (H₃L), containing a hard amido donor atom. The complexes have been characterized by elemental analysis, mass spectrometry, IR and ¹H NMR spectroscopies, magnetic measurements and molar conductivities. Co(HL)(H₂O) ( 2 ) has been found to rearrange in DMF solution into a crystallographically solved octahedral complex, CoL¹(H₂O)₂ ( 7 ) [where H₂L¹ is the symmetrical Schiff base ligand N,N′‐(1,2‐phenylene)‐bis(5‐nitro‐3‐hydroxysalicylidenimine)]. A hydrolysis mechanism is discussed to explain this rearrangement.     

Electrical conductivity of π-conjugated polymers with nitro substituents

π-Conjugated polymers bearing nitro substituent(s), e.g., poly(aryleneethynylene) (PAE) type polymers and poly(4,8-dinitroanthraquinone-1,5-diyl) P(4,8-NO₂-1,5-AQ), show semiconducting properties with electrical conductivities of an order of 10⁻⁷ to 10⁻⁶ S · cm⁻¹ at room temperature without special oxidation and reduction of the polymer. P(4,8-NO₂-1,5-AQ) shows a large shift of phase in alternating current (ac) measurements and a unique magnetism at low temperature.     

Synthesis,structure, photoluminescence and magnetic properties of lanthanide-pyridine-2,4,6-tricarboxylate coordination polymers

Two new lanthanide-pyridine-2,4,6-tricarboxylate coordination polymers [Pr(H₂O)₃(ptc)]⋅H₂O (1) and [Tb₂(H₂O)₉(ptc)₂]·3H₂O (2) (H₃ptc = pyridine-2,4,6-tricarboxylic acid) have been synthesized and structurally characterized by single crystal X-ray diffraction. The compound (1) crystallize as 2D layer, which are further engaged in hydrogen bonding leading to a novel 3D supramolecular architecture. Complex (2) exists as a centrosymmetric tetranuclear unit, which are assembled into a 3D supramolecular architecture via extensively hydrogen bonding interaction. The luminescence experiments show that Pr(III) and Tb(III) compounds exhibit typical luminescence in the visible region. Besides luminescence, the magnetic properties of (1) and (2) were investigated and indicate the anti-ferromagnetic couplings between the Ln(III) ions.     

Optical Polymer Having a High Refractive Index and High Abbe Number Prepared by Radical Polymerization Using 2,5-BiS(2-Thia-3-Butenyl)-1,4-Dithiane

Abstract

Novel poly(vinylsulfide)s were prepared by addition polymerization using 2,5-bis(2-thia-3-butenyl)-1,4-dithiane (TBD) with a radical initiator for an optical polymer having a high refractive index (n_D) and Abbe number (v). Homopolymerization of TBD (72.9% conversion) and copolymerization with acrylonitrile or acrylates having nonpolar groups (50.4–81.3% conversion according to the comonomers used) in a limited composition range yielded hard and transparent polymers suitable for application in optics. The methacrylates used yielded no polymeric product as a result of the copolymerization. The obtained polymers had T_g, n_D and v ranging between 41.0–124.0°C, 1.678–1.546 and 34.1–43.8, respectively, except that poly(TBD) did not exhibit T_g below 200°C, and it had the highest n_D Most of the polymers have higher n_D and v than those of other conventional optical polymers and moreover, their values are comparable to those of flint glasses. The copolymerizability of TBD and the group contribution to n_D and v are discussed based on the Q-e scheme and on the Lorentz-Lorenz equation, respectively. This work shows that TBD serves as a useful material for the preparation of polymers having high n_D and v along with a T_g of more than 100°C, and that the polymers thus obtained are promising optical materials.

     

Nanometrization of Lanthanide‐Based Coordination Polymers

Heteronuclear lanthanide‐based coordination polymers are microcrystalline powders, the luminescence properties of which can be precisely tuned by judicious choice of the rare‐earth ions. In this study, we demonstrate that such materials can also be obtained as stable solutions of nanoparticles in non‐toxic polyols. Bulk powders of the formula [Ln_2?2xLn′_2x(bdc)₃ ? 4 H₂O]_∞ (where H₂bdc denotes 1,4‐benzene‐dicarboxylic acid, 0≤x≤1, and Ln and Ln′ denote lanthanide ions of the series La to Tm plus Y) afford nanoparticles that have been characterized by dynamic light‐scattering (DLS) and transmission electron microscopy (TEM) measurements. Their luminescence properties are similar to those of the bulk materials. Stabilities versus time and versus dilution with another solvent have been studied. This study has revealed that it is possible to tune the size of the nanoparticles. This process offers a reliable means of synthesizing suspensions of nanoparticles with tunable luminescence properties and tunable size distributions in a green solvent (glycerol). The process is also extendable to other coordination polymers and other solvents (ethylene glycol, for example). It constitutes a new route for the facile solubilization of lanthanide‐based coordination polymers.