Bismuth Trichloride–Catalyzed C‐Alkylation of Pyrroles with Electron‐Deficient Olefins

The BiCl₃‐catalyzed reaction of pyrroles with electron‐deficient olefins generated the corresponding Michael adducts in high yields.     

The Preparation and Application of Bismuth (III) Ion‐Selective Electrode Based on Nanoparticles of Bismuth Sulfide

Abstract

Nanoparticles of bismuth sulfide were prepared in the organic phase and the optimum synthesis conditions for the nanoparticles were studied in detail. Transmission electron microscope (TEM) results indicated that the size distribution of the nanoparticles was proportional with an average diameter of 46.4 nm. A novel bismuth ion‐selective electrode (ISE) was prepared by dispersing the bismuth sulfide nanoparticles in polyvinylchloride (PVC) membrane. The linear range was 1.00×10^?8～1.00×10^?4 mol L^?1 and the detection limit was 8.10×10^?9 mol L^?1. The response of the electrode was fast with quite reasonable reproducibility and stability. It was used to determine bismuth in three kinds of stomach medicines and the results were in good agreement with the flame atomic absorption spectrometry (FAAS) method.     

Bismuth(III) Chloride–Catalyzed Three‐Component Coupling: Synthesis of α‐Amino Phosphonates

A simple and efficient method has been developed for the one‐pot synthesis of α‐amino phosphonates from the reaction of a carbonyl compound, amine, and dialkyl phosphite. The highly catalytic nature of bismuth(III) chloride and the fact that it is relatively nontoxic, low cost, easy to handle, and insensitive to small amounts of air and moisture make this method especially attractive for large‐scale synthesis.     

Two‐Step Novel Synthesis of 2‐Amino‐6‐(1,3‐dioxo‐2,3‐dihydro‐1H‐inden‐2‐yl)‐4,7‐diphenyloxepine‐3‐carbonitrile and 5‐(1,3‐Dioxo‐2,3‐dihydro‐1H‐inden‐2‐yl)‐2‐imino‐6‐phenyl‐2H‐pyran‐3‐carbonitrile

Starting from indan‐1,3‐dione, a novel two‐step synthesis of the oxepine derivatives 5a,b and the pyran derivatives 7 and 8 under very simple reaction conditions is described.     

Application of the Bismuth Film Electrode for Catalytic Adsorptive Stripping Potentiometric Determination of Cobalt in Dimethylglyoxime‐Nitrite System

Abstract

The application of bismuth film electrodes to the determination of cobalt by constant current adsorptive stripping potentiometry with exploitation of a catalytic effect is presented. The addition of NaNO₂ to the solution containing ammonia buffer and dimethylglyoxime results in a 25‐fold enhancement of the adsorptive stripping potentiometric cobalt signal. Several key parameters of the potentiometric stripping mode were optimized, including the composition of the supporting electrolyte, the stripping current, the accumulation potential, and the accumulation time. The optimized procedure yields favorable and highly stable stripping responses with good precision (RSD=1.4% for a Co concentration of 2 µg L^?1), low detection limit (0.07 µg L^?1), and good linearity (up to 10 µg L^?1, R²=0.998) with a deposition time of 60 s and a stripping current of 10 µA. The method enables the determination of Co in the presence of high excesses of Ni or Zn.     

Synthesis of C‐Nucleoside Analogues Starting from 1‐(Methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl)‐4‐phenyl‐but‐3‐yn‐2‐one

Abstract

1‐(Methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl)‐4‐phenyl‐but‐3‐yn‐2‐one (4) was synthesized by the reaction of (methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl)ethanal (2) with lithium phenylethynide and following oxidation. Compound 4 and hydrazine hydrate provided the 3(5)‐(methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl‐methyl)‐5(3)‐phenyl‐1H‐pyrazole (5). The reactions of 4 with amidinium salts and a S‐methyl‐isothiouronium salt, respectively, furnished the pyrimidine C‐nucleoside analogues 6a–6c. Treatment of 4 with 2‐aminobenzimidazole afforded 2‐(methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐ylmethyl)‐4‐phenyl‐benzo [4,5]imidazo[1,2‐a]pyrimidine (7a). Compound 4 and sodium azide yielded 2‐(methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl)‐1‐[5(4)‐phenyl‐1H(2H)‐1,2,3‐triazole‐4(5)‐yl]ethanone (8).     

Efficient Preparation of ((3‐Chloro‐2‐fluoro‐phenyl)‐[7‐methoxy‐8‐(3‐morpholin‐4‐yl‐propoxy)‐10,11‐dihydro‐5‐oxa‐2,4,11‐triaza‐dibenzo(a,d)cyclohepten‐1‐yl]‐amine) for In‐Vivo Study

An improved route for the preparation of highly functionalized 5,6‐dihydro‐pyrimido[4,5‐b][1,4]oxazepine 1a in multigram quantities was developed. This new methodology was highlighted by the proper methoxy disposition via a regioselective methylation of 2,4,5‐trihydroxy‐benzaldehyde followed by a magnesium sulfate–promoted cyclization.     

Flow Injection On‐line Preconcentration Coupled with Hydride Generation Atomic Fluorescence Spectrometry for Ultra‐Trace Amounts of Bismuth Determination in Biological and Environmental Water Samples

Abstract

A simple and sensitive flow injection on line separation and preconcentration system coupled to hydride generation atomic fluorescence spectrometry (HG‐AFS) was developed for ultra‐trace bismuth determination in water and urine samples. The preconcentration of bismuth on a nylon fiber‐packed microcolumn was carried out based on the retention of bismuth complex with Bismuthiol I. A 15% (v/v) HCl was introduced to elute the retained analyte complex and merge with KBH₄ solution for HG‐AFS detection. Under the optimal experimental conditions, an enhancement factor of 20 was obtained at a sample frequency of 24/h with a sample consumption of 13.0 ml. The limit of detection was 2.8 ng/l and the precision (RSD) for 11 replicate measurements of 0.1 µg/l Bi was 4.4%.     

Bromination of 4‐Dichloromethyl‐4‐methylcyclohexa‐2,5‐dien‐1‐ones

Bromination of 4‐dichloromethyl‐4‐methylcyclohexa‐2,5‐dien‐1‐one and 4‐dichloromethyl‐3,4‐dimethylcyclohexa‐2,5‐dien‐1‐one has been studied. The reaction conditions required for the formation of mono‐, di‐, and tribrominated products have been optimized.     

Facile One‐Pot Synthesis of 3‐{2‐[5‐Hydroxy‐4‐(2‐hydroxy‐ethyl)‐3‐methyl‐pyrazol‐1‐yl]‐thiazol‐4‐yl}‐chromen‐2‐ones via a Three‐Component Reaction

Reaction of 3‐(2‐bromo‐acetyl)‐chromen‐2‐one with thiosemicarbazide and 2‐acetylbutyro lactone in anhydrous ethanol gave 3‐{2‐[5‐hydroxy‐4‐(2‐hydroxy‐ethyl)‐3‐methyl‐pyrazol‐1‐yl]‐thiazol‐4‐yl}‐chromen‐2‐one in good yields.     

Efficient Synthesis of Trialkyl (E)‐3‐{3‐Oxo‐2‐3,4‐dihydro‐2‐(1H)‐quinoxalinylidene}‐prop‐1‐ene‐1,2,3‐tricarboxylates

The reaction of dialkyl acetylenedicarboxylates with alkyl 2‐[3‐oxo‐3,4‐dihydro‐2(1H)‐quinoxadinylidene]ethanoates in the presence of triphenylphosphine leads to trialkyl (E)‐3‐{3‐oxo‐2‐3,4‐dihydro‐2‐(1H)‐quinoxalinylidene}‐prop‐1‐ene‐1,2,3‐tricarboxylates in good yields.     

Structure of 2,4,4,5,5‐pentamethyl‐2‐imidazoline‐1‐oxyl‐3‐oxide

The crystal and molecular structures of the stable nitroxide radical 2,4,4,5,5pentamethyl2imidazoline1oxyl3oxide was determined. The N—O bond lengths are 1.279(2) and 1.280(2), respectively. The O^-—N⁺=C—N— O fragment is nearly planar with carbon atoms of the ethyl fragment that deviated from the O—N⁺=C—N—O plane by –0.204(5) and +0.176(5). The minimum intermolecular distance between the oxygen atoms of NO groups is 4.094.     

Facile Synthesis of 2‐Alkylthio‐3‐alkyl‐5‐phenylmethylidene‐4H‐imidazol‐4‐ones

2‐Alkylthio‐3‐alkyl‐5‐phenylmethylidene‐4H‐imidazol‐4‐ones 6 were synthesized by N‐alkylation and S‐alkylation of 2‐thioxo‐5‐phenylmethylidene‐4‐imidazolidinone 5, which was obtained via cyclization of vinyl isothiocyanate 4 with excess ammonium hydroxide (28% NH₃ in water).     

Facile Synthesis of 2‐Alkylthio‐5,5‐dimethyl‐4H‐imidazol‐4‐ones

The isothiocyanate 3, obtained from aza‐Wittig reaction of iminophosphorane 2 with CS₂, reacts with phenylhydrazine to give thiosemicarbazide 4. Reactions of 4 with alkyl halides in the presence of K₂CO₃ directly provided 2‐alkylthio‐4H‐imidazol‐4‐ones 6 in good yields.     

Microwave‐Promoted Efficient Synthesis of 3‐(5‐Arylfuran‐2‐yl)‐6‐aryl/aryloxymethylene‐1,2,4‐s‐Triazolo[3,4‐b]‐1,3,4‐thiadiazoles

A simple, rapid, and efficient method for the synthesis of substituted 1,2,4‐s‐triazolo[3,4‐b]‐1,3,4‐thiadiazoles under microwave irradiation conditions is reported, and a series of 3‐(5′‐aryl‐2′‐furyl)‐6‐aryl/aryloxymethylene‐1,2,4‐s‐triazolo[3,4‐b]‐1,3,4‐thiadiazoles was synthesized via this method.     

Synthesis of Novel Anellated Pyranosides as Precursors of C‐Nucleoside Analogues Using Isopropyl 6‐O‐Acetyl‐3‐deoxy‐4‐S‐ethyl‐4‐thio‐α‐D‐threo‐hexopyranosid‐2‐ulose

Abstract

Isopropyl 6‐O‐acetyl‐3‐deoxy‐4‐S‐ethyl‐4‐thio‐α‐D‐threo‐hexopyranosid‐2‐ulose (3) was converted to the corresponding 3‐[bis(methylthio)methylene] derivative 4 with a push–pull activated C–C double bond. Treatment of 4 with hydrazine and methylhydrazine afforded the pyrano[3,4‐c]pyrazol‐5‐ylmethyl acetates 5a and 5b, respectively. Desulfurization of compound 4 with sodium boron hydride yielded the 3‐[(methylthio)methylene]hexopyranosid‐2‐ulose 7. Compound 7 was reacted with amines to furnish 3‐aminomethylene‐hexopyranosid‐2‐uloses 8, 9. Reaction of 7 with hydrazine hydrate, hydrazines, hydroxylamine, and benzamidine afforded the pyrazolo, isoxazalo, and pyrimido anellated pyranosides (10–13).     

Synthesis and Structure of 2‐Hydroxy‐2‐Methyl‐1,3‐Bis‐(Methyl 3′,4′,6′‐Tri‐O‐Acetyl‐β‐D‐Glucopyranosid‐2‐yl)‐Imidazolidine‐4,5‐Dione

The title compound was synthesized starting from methyl 3,4,6‐tri‐O‐acetyl‐2‐acetamido‐2‐deoxy‐β‐D‐glucopyranoside, oxalyl chloride, and methyl 3,4,6‐tri‐O‐acetyl‐2‐amino‐2‐deoxy‐β‐D‐glucopyranoside. The crystal and molecular structure of the obtained imidazolidine‐4,5‐dione have been determined by X‐ray analysis as well as ¹H and ¹³C NMR spectroscopy.     

Synthesis of the Potassium Channel Opener (3S,4R)‐3,4‐Dihydro‐4‐(2,3‐dihydro‐2‐methyl‐3‐oxo‐pyridazin‐6‐Yl)oxy‐3‐hydroxy‐6‐(3‐hydroxyphenyl)sulphonyl‐2,2,3‐trimethyl‐2H‐benzo[b]pyran

The preparation of the potassium channel opener (3S,4R)‐3,4‐dihydro‐4‐(2,3‐dihydro‐2‐methyl‐3‐oxo‐pyridazin‐6‐yl)oxy‐3‐hydroxy‐6‐(3‐hydroxyphenyl)sulphonyl‐2,2,3‐trimethyl‐2H‐benzo[b]pyran (1) as a single enantiomer is reported. Considerable improvements have been implemented with respect to the original synthesis that allow for the preparation of multigram quantities of the final target compound. The optimized synthesis consists of a six‐step linear sequence whose key step is an asymmetric epoxidation protocol through the use of Jacobsen's (S,S)‐(+)‐N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediaminomanganese(III) chloride catalyst.     

Novel Synthetic Route of (2S)‐6‐Fluoro‐4‐oxo‐3,4‐dihydro‐2H‐chromene‐2‐carboxylic Acid

(2S)‐6‐Fluoro‐4‐oxo‐3,4‐dihydro‐2H‐chromene‐2‐carboxylic acid, a key intermediate of Fidarestat, was synthesized from natural chiral pool D‐mannitol. Its structure was confirmed by optical analyses, elemental analyses, and IR, ¹H NMR, and ESI‐MS spectra.