Synthesis of Star‐Shaped Poly(ϵ‐caprolactone)‐b‐Poly(styrene) Block Copolymer by Combining Ring‐Opening Polymerization and Atom Transfer Radical Polymerization

Newly designed star‐shaped block copolymers made of poly(?‐caprolactone) (PCL) and polystyrene (PS) were synthesized by combining ring‐opening polymerization (ROP) of ?‐caprolactone (CL) and atom transfer radical polymerization (ATRP) of styrene (St). The switch from the first to the second mechanism was obtained by selective transformation of “living” radical sites. First, tri‐ and tetrafunctional initiators were used as an initiator for the “living” ring opening polymerization (ROP) of ?‐caprolactone producing a hydroxyl terminated three or four arm star‐shaped polymer. Next, the OH end groups of PCL star branches were derivatized into 2‐bromoisobutyrate groups which gave rise to the corresponding tri‐ and tetrabromoester ended‐PCL stars; the latter served as macroinitiators for the ATRP of styrene at 110°C in the presence of CuBr/2,2‐bipyridine (Bipy) catalyst system affording star‐shaped block copolymers PCL_n‐b‐PS_n (n=3 or 4). The samples obtained were characterizated by ¹H‐NMR spectroscopy and GPC (gel permeation chromatograph). These copolymers exhibited the expected structure. The crystallization of star‐shaped block copolymers was studied by DSC (differential scanning calorimetry). The results show that when the content of the PS block increased, the T_m of the star‐shaped block copolymer decreased.     

Thermal decomposition and kinetics studies on the 2,2-dinitropropyl acrylate–styrene copolymer and 2,2-dinitropropyl acrylate–vinyl acetate copolymer

In the present work, kinetics of thermal decomposition of 2,2-dinitropropyl acrylate–styrene copolymer (DNPA/St) and 2,2-dinitropropyl acrylate–vinyl acetate copolymer (DNPA/VAc) was investigated by differential scanning calorimetry (DSC). The influence of the heating rate (5, 10, 15, and 20 °C min^?1) on the DSC behavior of the copolymer was verified. The results showed that, as the heating rate was increased, decomposition temperature of the copolymer was increased. Also, the kinetic parameters such as activation energy and frequency factor of the copolymer were obtained from the DSC data by the isoconversional methods proposed by Kissinger–Akahira–Sunose (KAS) and Flynn–Wall–Ozawa (FWO). Average activation energy obtained by KAS and FWO methods for the thermal decomposition reaction of DNPA/St and DNPA/VAc are 157.38 ± 0.27 and 147.67 ± 0.57 kJ mol^?1, respectively. The rate constants for thermal decomposition calculated from the activation parameters showed the structural dependency. The relative stability of two copolymers under 50 °C was in this order: DNPA/St > DNPA/VAc. The results of thermogravimetry (TG) analysis revealed that the main mass changes for DNPA/St and DNPA/VAc occurred in the temperature ranges of 200–270 °C. The DSC-FTIR analysis of DNPA/St indicates that the band intensity of nitro and other groups increased haphazardly from 230 °C due to thermal decomposition.     

Synthesis of Thiazolo[2,3‐c]‐s‐triazoles Using Poly[(4‐diacetoxyiodo)styrene]

Abstract

Arenecarbaldehyde‐4‐arylthiazol‐2‐ylhydrazones underwent ring closure with poly[(4‐diacetoxyiodo)styrene] (PSDIB) to 3,5‐diarylthiazolo[2,3‐c]‐s‐triazoles in dichloromethane.     

Synthesis and Characterization of Poly(methyl methacrylate‐co‐hydroxyethyl methacrylate)‐b‐polyisobutylene‐b‐poly(methyl methacrylate‐co‐hydroxyethyl Methacrylate) Triblock Copolymers

The synthesis of poly[(methyl methacrylate‐co‐hydroxyethyl methacrylate)‐b‐isobutylene‐b‐(methyl methacrylate‐co‐hydroxyethyl methacrylate)] P(MMA‐co‐HEMA)‐b‐PIB‐b‐P(MMA‐co‐HEMA) triblock copolymers with different HEMA/MMA ratios has been accomplished by the combination of living cationic and anionic polymerizations. P(MMA‐co‐HEMA)‐b‐PIB‐b‐P(MMA‐co‐HEMA) triblock copolymers with different compositions were prepared by a synthetic methodology involving the transformation from living cationic to anionic polymerization. First, 1,1‐diphenylethylene end‐functionalized PIB (DPE‐PIB‐DPE) was prepared by the reaction of living difunctional PIB and 1,4‐bis(1‐phenylethenyl)benzene (PDDPE), followed by the methylation of the resulting diphenyl carbenium ion with dimethylzinc (Zn(CH₃)₂). The DPE ends were quantitatively metalated with n‐butyllithium in tetrahydrofuran, and the resulting macroanion initiated the polymerization of methacrylates yielding triblock copolymers with high blocking efficiency. Microphase separation of the thus prepared triblock copolymers was evidenced by the two glass transitions at ?64 and +120°C observed by differential scanning calorimetry. These new block copolymers exhibit typical stress‐strain behavior of thermoplastic elastomers. Surface characterization of the samples was accomplished by angle‐resolved X‐ray photoelectron spectroscopy (XPS), which revealed that the surface is richer in PIB compared to the bulk. However, a substantial amount of P(MMA‐co‐HEMA) remains at the surface. The presence of hydroxyl functionality at the surface provides an opportunity for further modification.     

Preparation and Stereochemistry of the Isopropylidene Derivatives of 1,2‐Dihydronaphtho[2,1‐b]Furan‐1,2‐Diol and 1,2,9,10‐Tetrahydronaphtho[2,1‐b:7,8‐b′] Difuran‐1,2,9,10‐Tetraol in Comparison with the Corresponding Acetyl Derivatives

Abstract

1,2‐Dihydronaphtho[2,1‐b]furan‐1,2‐diol and 1,2,9,10‐tetrahydronaphtho[2,1‐b:7,8‐b′]difuran‐1,2,9,10‐tetraol were transformed into the corresponding isopropylidene derivatives, which were studied mainly by ¹H NMR and chiral HPLC analyses in terms of a possible transformation mechanism and stereochemistry in comparison with their corresponding acetyl derivatives.     

Studies in Thio‐Claisen Rearrangement: Regioselective Synthesis of Thiopyrano[2,3‐b]pyran‐2‐ones and Thieno[2,3‐b]pyran‐2‐ones

Abstract

4‐Mercapto‐6‐methyl‐2‐pyrone was alkylated with different allylic and propargylic halides under phase transfer catalyzed condition in the presence of TBAB or BTEAC catalyst in chloroform–aqueous NaOH (1%) at room temperature. The S‐alkylated thiopyran‐2‐ones were then refluxed in quinoline or in chlorobenzene to give 4‐chloromethylthiopyrano[2,3‐b]pyran‐2‐one and 4‐hydroxymethylthiopyrano[2,3‐b]pyran‐2‐one or several thieno[2,3‐b]pyran‐2‐ones.     

Living Cationic Sequential Block Copolymerization of Isobutylene with 4‐tert‐Butoxystyrene: Synthesis and Characterization of Poly(p‐hydroxystyrene‐b‐isobutylene‐b‐p‐hydroxystyrene) Triblock Copolymers

The living polymerization of p‐tert‐butoxystyrene (tBuOS) was studied in methylcyclohexane (MeChx)/methylchloride (MeCl) 60/40 v/v solvent mixture at –80°C. The model initiator 1,1,‐ditolylethylene (DTE) capped 2‐chloro‐2,4,4‐trimethylpentane (TMPCl) was formed in situ in conjunction with TiCl₄. Lowering the Lewis acidity by the addition of Ti(OIp)₄ was necessary to induce a rapid and controlled polymerization of tBuOS. Well‐defined polymers with controlled molecular weights, however, were only obtained at a narrow [Ti(OIp)₄]/[TiCl₄]=0.83–0.86 ratio. Above this ratio, the polymerization of tBuOS was slow and became absent at [Ti(OIp)₄]/[TiCl₄]≥1.18. At ratios lower than 0.83, the polymerization was too rapid and the initiator efficiency was lower than 100%. The living polymerization of tBuOS was also studied with SnBr₄ as Lewis acid. After capping TMPCl with DTE, Ti(OIp)₄ was added to reach [Ti(OIp)₄]/[TiCl₄]=1.2, followed by the addition of tBuOS and SnBr₄. SnBr₄ induced a well‐controlled living polymerization approximately first order in [SnBr₄], and the polymers exhibited close to theoretical M _ns and low polydispersity indices (PDI<1.2). The success of the method was also demonstrated by the clean synthesis of poly(isobutylene‐b‐p‐tert‐butoxystyrene) PIB‐b‐PtBuOS diblock copolymers. PtBuOS‐b‐PIB‐b‐PtBuOS triblock copolymer thermoplastic elastomers were prepared by employing 5‐tert‐butyl‐1,3‐bis(1‐methoxy‐1‐methylethyl)benzene (DCE) as a difunctional initiator for the living polymerization of IB followed by capping with DTE and substitution of TiCl₄ with SnBr₄ for the polymerization of tBuOS. Deprotection of the triblock copolymer in the presence of catalytic amount of HCl yielded poly(p‐hydroxystyrene‐b‐isobutylene‐b‐p‐hydroxystyrene) (PHOS‐b‐PIB‐b‐PHOS). PHOS‐b‐PIB‐b‐PHOS with 39.3 wt% p‐hydroxystyrene content exhibited typical characteristic of a thermoplastic elastomers (TPEs) with tensile strength of 18 MPa and ultimate elongation of 300%.     

Synthesis of 7‐Sulfamoyl‐substituted 2‐Oxo‐2,3,4,5‐tetrahydro‐1H‐benzo[b]azepines

Sulfochlorination of 2‐оxo‐2,3,4,5‐tetrahydro‐1H‐benzo[b]azepine led to regioselective formation of the corresponding 7‐chlorosulfonyl derivative. Starting from this reagent, a large number of substituted 2‐oxo‐7‐sulfamoyl‐2,3,4,5‐tetrahydro‐1H‐benzo[b]azepines were obtained. This approach is amenable to combinatorial production of the title compounds, which possess promising therapeutic potential.     

Synthesis of 2‐Spironaphtho[2,3‐b]pyranoquinones

A convenient procedure for the synthesis of 2‐spirobenzopyranoquinone 5 and its application to the preparation of spironaphtho[2,3‐b]pyranoquinones 6 and 7 is described.     

Improvements in morphological and electro‐optical properties of polymer‐dispersed liquid crystal grating using a highly fluorine‐substituted acrylate monomer

To improve the morphological and electro‐optical properties of a polymer‐dispersed liquid crystal (PDLC) grating, a type of highly fluorine‐substituted acrylate monomer was added to the prepolymer mixture. The morphologies of the PDLC gratings were investigated using atom force microscopy and scanning electron microscopy. The grating had a very clear polymer/LC interface after addition of 3.9 wt % of fluorine‐substituted monomer. The LC droplets in this case were much larger than the sample without fluorinated monomer. This phenomenon indicated that an almost complete phase separation had occurred. However, as the content of fluorine‐substituted monomer increased, the morphologies of gratings became less defined and the volumes of LC droplets were smaller. The diffraction efficiency (DE) decreased with increasing of fluoride content and the V ₉₀ increased simultaneously, which may be ascribed to the blurry interface and the small LC droplets. The highest DE (90%) and lowest V ₉₀ (70 V) were obtained simultaneously under the condition of 3.9 wt % fluoride added in the prepolymer. In addition, it was also found that the fluorine‐substituted monomer may disorder the alignment of LCs in the grating.     

Novel and Efficient Solid‐State Synthesis of 3‐Alkyl‐6‐Aryl‐s‐triazolo[3,4‐b]‐1,3,4‐thiadiazine Derivatives

A novel and efficient solid‐state synthesis of s‐triazolo[3,4‐b]‐1,3,4‐thiadiazine derivatives has been reported. Twelve 3‐alkyl‐6‐aryl‐s‐triazolo[3,4‐b]‐1,3,4‐thiadiazine derivatives have been synthesized in excellent yields with short reaction time.     

Microwave‐Promoted Efficient Synthesis of 3‐(5‐Arylfuran‐2‐yl)‐6‐aryl/aryloxymethylene‐1,2,4‐s‐Triazolo[3,4‐b]‐1,3,4‐thiadiazoles

A simple, rapid, and efficient method for the synthesis of substituted 1,2,4‐s‐triazolo[3,4‐b]‐1,3,4‐thiadiazoles under microwave irradiation conditions is reported, and a series of 3‐(5′‐aryl‐2′‐furyl)‐6‐aryl/aryloxymethylene‐1,2,4‐s‐triazolo[3,4‐b]‐1,3,4‐thiadiazoles was synthesized via this method.     

Synthesis of 9‐Methyl‐11H‐pyrido[2,1‐b]quinazolin‐11‐one Using the Ullmann Condensation

The Ullmann condensation between 2‐chlorobenzoic acid and 2‐amino‐6‐methyl pyridine in DMF as solvent yielded 2‐[(6‐methyl‐2‐pyridinyl)amino] benzoic acid. The cyclization of this acid gave two isomers, the 9‐methyl‐11H‐pyrido[2,1‐b]quinazolin‐11‐one and, in a minor quantity, 2‐methylbenzo[b][1,8]naphtyridin‐5(10H)‐one. Using ultrasound irradiation the pyridoquinazolin‐11‐one was obtained as the sole product.     

Copolymerization of （10-oxo- 10-hydro-9-oxa- 10λ^5-phosphaphenanthrene-lO-yl）-methyl acrylate with styrene

A phosphorus-containing monomer (10-oxo-10-hydro-9-oxa-10λ⁵-phospha-phenanthrene-10-yl)-methyl acrylate (M₁) was copolymerized with styrene to give a potential flame retardant copolymer of high thermal stability. The structures of monomer and copolymer were characterized by FT-IR and ¹H NMR measurements. The reactivity ratios for free-radical of the monomer (M₁) and styrene (M₂) were studied. The calculated results are as follows:r₁=0.225, r₂=0.503; Q₁=0.413, e₁=0.476; azeotropic point=0.37. TGA and DTG curves indicated that M₁ is a potential flame retarding monomer for styrenic polymers.     

One‐Pot and Convenient Conversion of 5‐Azidopyrazole‐4‐carboxaldehyde to Pyrazolo[3,4‐b]pyridines

A one‐pot and convenient synthesis of multisubstituted pyrazolo[3,4‐b]pyridines in moderate to high yields has been achieved by a two‐step reaction: diazo‐transfer of 5‐azido‐1‐phenylpyrazole‐4‐carboxaldehydes to ketones in ethanolic KOH to give 5‐amino‐1‐phenylpyrazole‐4‐carboxaldehyde and subsequent Friedlaender reaction of 5‐amino‐1‐phenylpyrazole‐4‐carboxaldehyde with ketones.     

Synthesis of 1,4‐Bis[(3‐Aryl)‐s‐triazolo(3,4‐b)‐(1,3,4)thiadiazole‐6‐yl]benzenes

Some 1,4‐bis[(3‐aryl)‐s‐triazolo[3,4‐b]‐[1,3,4]thiadiazole‐6‐yl]benzenes are readily accessible in high yields by reaction of 3‐aryl 4‐amino‐5‐mercapto‐1,2,4‐triazole with p‐phthalic acid.     

A Convenient Approach to the Synthesis of Dialkyl 5‐Oxo‐1,2‐dihydro‐5H‐chromeno [4,3‐b]pyridine‐2,3‐dicarboxylates

Coumarin and its analogs are considered privileged scaffolds in the current synthetic and pharmacological research. The chemical behavior of enaminocarbaldehydes of the coumarin moiety under intramolecular Wittig reaction conditions in the presence of triphenylphosphine and dimethyl or diethyl acetylenedicarboxylates has been studied, resulting in the isolation of a series of dimethyl and diethyl 5‐oxo‐1,2‐dihydro‐5H‐chromeno[4,3‐b]pyridine‐2,3‐dicarboxylates in good to high yields.     

A Neat and Rapid Synthesis of 2‐Aryloxymethylene‐6‐Arylimidazo[2,1‐b]‐1,3,4‐Thiadiazole Under Microwave Irradiation

A neat and rapid procedure is reported for the synthesis of a variety of 2‐aryloxymethylene‐6‐arylimidazo[2,1‐b]‐1,3,4‐thiadiazole (3a–3r) by condensation reaction of 2‐amino‐5‐aryloxymethylene‐1,3,4‐thiadiazole (1a–1f) with ω‐bromoacetophenone (2a–2c) in ethanol solvent under microwave irradiation, which yielded a series of novel compounds. The yields are good to excellent. The procedure is simple and does not need any added catalyst or dehydrating reagent. Moreover, the crystals do not require further purification to give the products.     

Novel Method for the Synthesis of 6,12‐Dihydro‐2‐Methylindolo[2,3‐ b]Carbazol‐6‐Ones

A novel method for the synthesis of 6,12‐dihydro‐2‐methylindolo[2,3‐b]carbazol‐6‐ones was developed from 1‐oxo‐2,3,4,9‐tetrahydro‐1H‐carbazol‐1‐one through methyl 6‐methyl‐2‐(1‐oxo‐2,3,4,9‐tetrahydro‐1H‐carbazol‐2‐yl)oxoacetate in good yields. This method provides an alternative path for the synthesis of this product using 2‐hydroxy methylene‐2,3,4,9‐tetrahydro‐1H‐carbazol‐1‐one.     

Green Procedure for the Synthesis of Phthalazino[2,3‐b]phthalazine‐5,7,12,14‐tetraones

Different novel phthalazino[2,3‐b]phthalazine‐5,7,12,14‐tetraones were synthesized in a simple and environmentally benign method from the reaction of phthalic anhydrides with semicarbazide or thiosemicarbazide using montmorillonite K‐10 clay as solid heterogeneous acidic catalyst and microwaves under solvent‐free conditions in good yields and short reaction times. Products were characterized by the elemental analysis, IR, NMR, and mass spectrometry.