Characterization of Ascentis RP-Amide column: Lipophilicity measurement and linear solvation energy relationships

This study investigates lipophilicity determination by chromatographic measurements using the polar embedded Ascentis RP-Amide stationary phase. As a new generation of amide-functionalized silica stationary phase, the Ascentis RP-Amide column is evaluated as a possible substitution to the n  -octanol/water partitioning system for lipophilicity measurements. For this evaluation, extrapolated retention factors, log k^′_w$\text{log}{k^{\prime }}_w$, of a set of diverse compounds were determined using different methanol contents in the mobile phase. The use of n-octanol enriched mobile phase enhances the relationship between the slope (S  ) of the extrapolation lines and the extrapolated log k^′_w$\text{log}{k^{\prime }}_w$ (the intercept of the extrapolation), as well as the correlation between log P   values and the extrapolated log k^′_w$\text{log}{k^{\prime }}_w$ (1:1 correlation, r² = 0.966). In addition, the use of isocratic retention factors, at 40% methanol in the mobile phase, provides a rapid tool for lipophilicity determination. The intermolecular interactions that contribute to the retention process in the Ascentis RP-Amide phase are characterized using the solvation parameter model of Abraham. The LSER system constants for the column are very similar to the LSER constants of the n-octanol/water extraction system. Tanaka radar plots are used for quick visual comparison of the system constants of the Ascentis RP-Amide column and the n-octanol/water extraction system. The results all indicate that the Ascentis RP-Amide stationary phase can provide reliable lipophilic data.     

Lipophilicity data for some preservatives estimated by reversed-phase liquid chromatography and different computation methods

The chromatographic behavior of some preservatives was performed by reversed-phase high-performance liquid chromatography on C18 (LiChroCART, Purosphere RP-18e), C8 (Zorbax, Eclipse XDB-C8), CN100 (Säulentechnik, Lichrosphere) and NH₂ (Supelcosil LC-NH₂) columns. The lipophilicity estimated for the first time on the first three columns are comparable and very well correlated. The mobile phase was a mixture of methanol–water (0.1% formic acid) in different volume proportions from 40% to 60% (v/v) for RP-C18, RP-C8 and RP-CN100 column (exception for parabens on RP-C8 column—the methanol concentrations being from 55% to 65%) and from 30% to 50% (v/v) for RP-NH₂. Highly significant correlations were obtained between different experimental indices of lipophilicity (log k_w, S, φ₀, mean of k and log k, and scores of k and log k corresponding to the first principal component) and computed log P values, and C8 column seems to be more suited for estimating the lipophilicity of the investigated compounds. These direct correlations offer a very good opportunity to derive powerful predictive models via Collander-type equations. The reliability of scores values as lipophilic indices is shown by their high correlation with the log K_ow obtained using classical “shake-flask” technique, log k_w and also some of the computed log P values. In addition, the results obtained applying PCA to the retention data may be used in interpreting the molecular mechanism of interactions between eluents and stationary phases with different polarity and to explain the chromatographic behavior of compounds. Finally, the “congeneric lipophilicity chart” described by the scores corresponding to the first principal component has the effect of separating compounds from each other more effectively from congeneric ((dis)similarity) point of view. The parabens and tert-butylhydroquinone appeared to be the most lipophilic preservatives.     

Application of perfluorinated acids as ion-pairing reagents for reversed-phase chromatography and retention-hydrophobicity relationships studies of selected β-blockers

The addition of the homologous series of perfluorinated acids-trifluoroacetic acid (TFAA), pentafluoropropionic acid (PFPA), heptafluorobutyric acid (HFBA) to mobile phases for reversed-phase high-performance liquid chromatography (RP-HPLC) of β-blockers was tested. Acidic modifiers were responsible for acidification of mobile phase (pH 3) ensuring the protonation of the β-blockers and further ion pairs creation. The effect of the type and concentration of mobile phase additives on retention parameters, the efficiency of the peaks, their symmetry and separation selectivity of the β-blockers mixture were all studied. It appeared that at increasing acid concentration, the retention factor, for all compounds investigated, increased to varying degrees. It should be stressed that the presence of acids more significantly affected the retention of the most hydrophobic β-blockers. Differences in hydrophobicity of drugs can be maximized through variation of the hydrophobicity of additives. Thus, the relative increase in the retention depends on either concentration and hydrophobicity of the anionic mobile phase additive or hydrophobicity of analytes. According to QSRR (quantitative structure retention relationship) methodology, chromatographic lipophilicity parameters: isocratic log k and log k_w values (extrapolated retention to pure water) were correlated with the molecular (log P_o/w) and apparent (log P_app) octanol–water partition coefficients obtained experimentally by countercurrent chromatography (CCC) or predicted by Pallas software. The obtained, satisfactory retention-hydrophobicity correlations indicate that, in the case of the basic drugs examined in RP-HPLC systems modified with perfluorinated acids, the retention is mainly governed by their hydrophobicity.     

Improvement of the high-speed log D assay using an injection marker for the water plug aspiration/injection method

An improved method for the high-speed assay for log D (HSLogD) employing an injection marker is described. The critical process of HSLogD is automated sampling of the water phase, which prevents contamination from the octanol phase. However, deployment of HSLogD sometimes produces incorrect and inaccurate values compared with data from closely related methods due to low solubility of compounds or instrument problems. Therefore, careful manual inspection of data is needed to confirm the results obtained by this method. To solve this problem, compounds were screened for suitability as injection markers and 2-(4-methoxyphenoxy)-4,8-dimethylquinoline was the most suitable compound examined. Introduction of the injection marker into the process successfully eliminated the need for the tedious and time-consuming manual inspection process.     

Frozen water phase method for logD measurement using a 96-well plate

In this study, a frozen water phase method for log D measurement using a 96-well plate was developed. In the case of log D measurement of compounds, the problem of octanol contamination often occurs; in lipophilic compounds, the concentration of the octanol phase is much higher than that of the water phase. When the water phase is separated from the octanol phase, a small amount of octanol phase contamination could strongly influence the concentration of the water phase. To avoid this problem, the frozen water phase method was developed. The water phase was frozen in liquid nitrogen and then the unfrozen octanol phase was removed. To remove the portion of the octanol remaining on the frozen water phase, the surface of the frozen water phase was washed with octanol and water/ethanol (50/50, v/v). The validity of the method was confirmed by results of commercially available drugs at the log D range from 0 to 4. Further, it was found that this method had the ability to evaluate the pH-log D profile of compounds in the range from pH 2 to pH 12. As a result, we developed the convenient and accurate method that is effective in preventing contamination with a wide dynamic range.     

Synthesis, characterization and intercalation property of layered zirconium benzylamino-N,N-dimethylphosphonate phosphate materials

Layered zirconium benzylamino-N,N-dimethylphosphonate phosphate (ZBMPA) was prepared by the reaction of zirconyl chloride with benzylamino-N,N-dimethylphosphonic acid (H₂BMPA) and phosphoric acid in the presence of hydrofluoric acid. The intercalation of n-alkylamines (n-butylamine, n-heptylamine and n-decylamine) into ZBMPA was primarily investigated at room temperature. These materials were characterized by elemental analysis, ICP, XRD, SEM, FT-IR, Raman spectra, TG and DSC. The composition of ZBMPA is Zr(HPO₄)(C₆H₅CH₂N(CH₂PO₃)₂)_0.5 · 2.0H₂O. The interlayer distance of ZBMPA, n-butylamine, n-heptylamine and n-decylamine intercalation compounds is 2.03, 2.58, 2.52 and 3.17 nm, respectively. ZBMPA and the n-alkylamine intercalation compounds are different in the morphology and vibration spectra. Thermogravimetries of all materials obtained reveal three step mass losses at temperatures of up to 1000 °C. These results indicate that n-alkylamines are intercalated into the galleries of host ZBMPA.     

Study of the lipophilicity of selenium species

In this work the lipophilicity of different selenium species occurring in environmental matrices and food, Se(IV), Se(VI), selenomethionine (Se-Met), selenocystamine (Se-CM), selenocystine (Se-Cyst), and dimethyl diselenide (CH₃)₂Se₂, was investigated in the octanol–water system, using the shaking flask method and detection with inductively coupled plasma–atomic emission spectrometry (ICP–AES), in order to assess their environmental fate and tendency to bioaccumulate. Polarography was also used for the electrochemically active Se species, Se(IV), Se-Cyst, Se-CM and (CH₃)₂Se₂, and the results were compared with those measured by ICP–AES. Furthermore, the influence of pH was studied by determining the logarithm of the distribution coefficient, log D, at three pH values, 5, 7, and 9, as was the impact of the marine environment on the lipophilicity profile of the six investigated Se species. The results were compared with those estimated approximately by use of PrologD software, based on the Ghose-Crippen log P (P: partition coefficient) calculation system, the only system which incorporates values—even though approximate—for the atom type of Se. Finally, from our experimental data an indicative value of the Se–Se fragment for log P prediction, for use in drug design, was estimated.     

Separation of organoselenium compounds and their electrochemical detection

A simplified procedure based on ion-exchange separation of selenourea (Se-U) and selenocystamine (Se-CM), which have very close half-wave potential when they are simultaneously analyzed by voltammetric techniques, has been developed and optimized. Thus, selenocystamine remains in the cation exchanger Purolite C 100 H, whereas selenourea is found in the effluent and is determined by square wave cathodic stripping voltammetry using Na₂CO₃ as electrolyte. Selenocystamine is then eluted from the cation exchanger using 4 M HCl and analyzed by square wave cathodic stripping voltammetry in the HCl solution. For each voltammetric determination the corresponding parameters were investigated and optimized; the obtained detection limits were 0.3 ng Se mL^–1 for Se-CM and 2 ng Se mL^–1 for Se-U. A flow sheet for the separation of inorganic (Se(IV) and Se(VI)) and organoselenium compounds (Se-U, Se-CM, (CH₃)₂Se₂, and (CH₃)₂Se) developed for their electrochemical detection is presented and it was successfully applied to a certified reference material, an environmental soil sample, and a urine sample.     

A new generation of cyanide ion-selective membranes for flow injection application: part II. Comparative study of cyanide flow-injection detectors based on thin electroplated silver chalcogenide membranes

Using induced cathodic electrodeposition a number of silver chalcogenide thin layer membranes of non-trivial composition have been synthesized and their performance as ion-selective flow-injection potentiometric detectors (FIPDs) for free cyanide has been critically estimated in the context of the stringent requirements for toxic cyanide environmental monitoring. AgSCN/Ag₂S, Ag₂S, Ag_2+δSe, Ag_2+δSe_1−xTe_x (0 < δ < 0.25 and x ≈ 0.13), Ag₂Se and Ag₂Se_1−xTe_x electroplated membranes were selected for the present performance-based comparative study in order to obtain a feedback information about the effect of membrane composition. Both silver selenide and Te-doped silver selenide membranes, irrespective of their stoichiometry with respect to silver, exhibit the lowest detection limit for CN⁻ (52 ppb) with linear double-Nernstian response down to 130 ppb. The type of chalcogene anion in the membrane composition proves to exert dominant effect on the general performance characteristics of the newly developed FIPDs. The silver stoichiometry (intrinsic defects factor) and the inclusion of Te-dopant (extrinsic defects factor) have more pronounced effect on the profile of the output signal and exert moderate control on the detectors selectivity and baseline stability. This new generation of CN⁻—ion-selective membranes for FIPDs exhibits high selectivity against the common interferents present in cyanide effluents such as SCN⁻, S₂O₃²⁻, Cl⁻ and do not get poisoned in the presence of S²⁻. Moreover, their long-term stability and signal reproducibility, which make redundant the regular day-to-day calibration, coupled with the cost-effective technology for membranes preparation and easy re-generation make them attractive candidates for incorporation into automated in-field devices for in situ cyanide toxic species monitoring.     

Are closed clusters expected from the (n + 1) skeletal electron pairs rule in alanes and gallanes? A DFT structural study of AnHn + 2 (A = Al, Ga, and n = 4-6)

It has been suggested recently that the alanes Al_nH_n + 2 can be treated by the polyhedral skeletal electron pair theory (PSEPT) of Wade and Mingos (W-M) as it was successful for their borane congeners such as B_nH_n + 2, well known as the deprotonated B_nH_n²⁻. To do so, the neutral Al_nH_n + 2 have been considered as Al_nH_n²⁻ + 2H⁺. The additional hydrogens donate their electrons to the Al_nH_n polyhedral framework and according to the n + 1 electron pairs rule; these clusters should have closo-polyhedral structures. In this work the homologous gallanes, the structures and stabilities of Ga_nH_n + 2 are studied at high levels of calculational theory and we investigated the applicability of the W-M rule to the alanes and gallanes A_nH_n + 2 (n = 4-6; A = Al, Ga). It will be shown that the presence of bridging hydrogen atoms reduces the compactness of the corresponding polyhedron and so these species do not have the closed structures. The computations were performed at B3LYP/6-311+G(d,p), BPW91/6-311G(d,p) and B3LYP/6-311+G(3df,2p) levels of theory. Our interest in these compounds includes their potential use as hydrogen storage species and future clean sources of energy.     

Retention of structurally diverse drugs in human serum albumin chromatography and its potential to simulate plasma protein binding

The retention behavior of 39 structurally diverse neutral, basic and acidic drugs was investigated on an HSA stationary phase using PBS buffer (pH 7.0) and acetonitrile or 2-propanol as organic modifiers. Extrapolated or directly measured log k_w values as well as isocratic retention factors were correlated with plasma protein binding data taken from the literature. Retention factors determined in the presence of 10% acetonitrile led to high quality 1:1 correlation with apparent log K_HSA values. The derived reference equation was successfully validated using a secondary set of 24 drugs. Further analysis of HSA retention into more fundamental properties revealed the involvement of anionic species in solute-stationary phase interactions, expressed by the negatively charged fraction, besides the partitioning mechanism which was reflected by lipophilicity. Protonation of basic drugs, although less important, may also influence retention, leading to reduced partitioning into the HSA surface as a net effect, while it seems to have no effect on HSA binding. The above results were further confirmed by linear solvation energy relationships (LSER).     

High dielectric constant PrYxOy sensing films electrolyte-insulator-semiconductor pH-sensor for the detection of urea

In this paper, we describe the structural and sensing properties of high-k PrY_xO_y sensing films deposited on Si substrates through reactive co-sputtering. Secondary ion mass spectrometry and atomic force microscopy were employed to analyze the compositional and morphological features of these films after annealing at various temperatures. The electrolyte-insulator-semiconductor (EIS) device incorporating a PrY_xO_y sensing membrane that had been annealed at 800 °C exhibited good sensing characteristics, including a high sensitivity (59.07 mV pH⁻¹ in solutions from pH 2 to 12), a low hysteresis voltage (2.4 mV in the pH loop 7 → 4 → 7 → 10 → 7), and a small drift rate (0.62 mV h⁻¹ in the buffer solution at pH 7). The PrY_xO_y EIS device also showed a high selective response towards H⁺. This improvement can be attributed to the small number of crystal defects and the large surface roughness. In addition, the enzymatic EIS-based urea biosensor incorporating a high-k PrY_xO_y sensing film annealed at 800 °C allowed the potentiometric analysis of urea, at concentrations ranging from 1 to 16 mM, with a sensitivity of 9.59 mV mM⁻¹.     

Ionothermal synthesis of β-NH4AlF4 and the determination by single crystal X-ray diffraction of its room temperature and low temperature phases

β-NH₄AlF₄ has been synthesised ionothermally using 1-ethyl-3-methylimidazolium hexafluorophosphate as solvent and template provider. β-NH₄AlF₄ crystals were produced which were suitable for single crystal X-ray diffraction analysis. A phase transition occurs between room temperature (298 K) and low temperature (93 K) data collections. At 298 K the space group=I4/mcm (no. 140), α=11.642(5), c=12.661(5) Å, Z=2 (10NH₄AlF₄), wR(F²)=0.1278, R(F)=0.0453. At 93 K the space group=P4₂/ncm (no. 138), α=11.616(3), c=12.677(3) Å, Z=2 (10NH₄AlF₄), wR(F²)=0.1387, R(F)=0.0443. The single crystal X-ray diffraction study of β-NH₄AlF₄ shows the presence of two different polymorphs at low and room temperature, indicative of a phase transition. The [AlF_4/2F₂]⁻ layers are undisturbed except for a small tilting of the AlF₆ octahedra in the c-axis direction.     

Determination of pKa values of some antihypertensive drugs by liquid chromatography and simultaneous assay of lercanidipine and enalapril in their binary mixtures

In this study, pK_a values were determined using the dependence of the retention factor on the pH of the mobile phase for three ionizable substances, namely, enalapril, lercanidipine and ramipril (IS). The effect of the mobile phase composition on the ionization constant was studied by measuring the pK_a at different methanol-water mixtures, ranging between 50 and 65% (v/v), using LC-DAD method. Two simple, accurate, precise and fully validated analytical methods for the simultaneous determination of enalapril and lercanidipine in combined dosage forms have been developed. Separation was performed on an X-Terra RP-18 column (250 mm × 4.60 mm ID × 5 μm) at 40 °C with the mobile phase of methanol-water 55:45 (v/v) adjusted to pH 2.7 with 15 mM orthophosphoric acid. Isocratic elution was performed in less than 12 min with a flow rate of 1.2 mL min⁻¹. Good sensitivity for the analytes was observed with DAD detection. The LC method allowed quantitation over the 0.50-20.00 μg mL⁻¹ range for enalapril and lercanidipine. The second method depends on first derivative of the ratio-spectra by measurements of the amplitudes at 219.7 nm for enalapril and 233.0 nm for lercanidipine. Calibration graphs were established for 1-20 μg mL⁻¹ for enalapril and 1-16 μg mL⁻¹ lercanidipine, using first derivative of the ratio spectrophotometric method. Both methods have been extensively validated. These methods allow a number of cost and time saving benefits. The described methods can be readily utilized for analysis of pharmaceutical formulations. The methods have been applied, without any interference from excipients, for the simultaneous determination of these compounds in tablets. There was no significant difference between the performance of the proposed methods regarding the mean values and standard deviations.