European ring exercise on water toxicity using different bioluminescence inhibition tests based on Vibrio fischeri, in support to the implementation of the water framework directive

An inter-laboratory comparison exercise was conducted under the European Union funded project entitled: Screening Methods for Water Data Information in Support of the Implementation of the Water Framework Directive (SWIFT-WFD) and coordinated by the Consejo Superior de Investigaciones Científicas (CSIC), in order to evaluate the reproducibility of different toxicity tests based on the bioluminescence inhibition of Vibrio fischeri, for the rapid water toxicity assessment.For the first time, this type of exercise has been organized in Europe, and using different tests based on the same principle. In this exercise, 10 laboratories from 8 countries (Austria, Cyprus, Germany, Greece, Italy, Portugal, Romania, and Spain) took place, and a total number of 360 samples were distributed.During the exercise, six series of six samples were analyzed along 5 months. Every batch of samples was composed by three real samples and three standard solutions. The real samples were: a raw influent and the effluent of a wastewater treatment plant (WWTP), and a sample from a first settlement of the WWTP spiked with a mixture of toxicant standards.A final number of 330 (91.7%) samples was analyzed, 3300 values in duplicate were collected, and the results for each sample were expressed as the 50% effective concentration (EC₅₀) values calculated through five points of dilution inhibition curves, after 5 and 15 min of incubation times.A statistical study was initiated using 660 results. The mean values, standard deviations (σ), variances (σ²), and upper and lower warning limits (UWL and LWL) were obtained, using the EC₅₀ values calculated with the result from the participating laboratories.The main objectives of this toxicity ring study were to evaluate the repeatability (r) and reproducibility (R) when different laboratories conduct the test, the influence of complex matrix samples, the variability between different tests based on the same principle, and to determine the rate at which participating laboratories successfully completed tests initiated.In this exercise, the 3.93% toxicity values were outliers according with the Z-score values and the Dixon test. The samples with the greater number of outliers were those with the smallest variability coefficient, corresponding to the greater and the smaller toxicity level.No relation was found through the cluster analysis, between the final results and the different commercial devices involved. Testing by multiple commercial devices did not appear to reduce the precision of the results, and the variability coefficient for the exercise was nearby to the average value for past editions carried out at national level, where the different participants used the same commercial device.Stability of samples was also followed during the exercise. While statistical significance differences were not found for the greater part of samples, for the sample from the WWTP influent, a significant decrease of the toxicity value was found along this study. Nevertheless, this was a type of sample with a high toxicity level during all the exercise.On the other hand, in order to obtain the chemical characterization of real samples, those were analyzed by chromatographic techniques, using different sequential solid phase extraction (SSPE) procedures, followed by liquid chromatography coupled with mass spectrometry (LC-MS), and gas chromatography-mass spectrometry (GC-MS). Good agreement was found between the chemical analysis results and the toxicity level of the samples.     

Solid-phase extraction of organic compounds in atmospheric aerosol particles collected with the particle-into-liquid sampler and analysis by liquid chromatography-mass spectrometry

Atmospheric aerosol particles, collected with the particle-into-liquid sampler at SMEARII station in Finland in mid-August 2007, were analysed for biogenic acids. The sample pretreatment method, comprising solid-phase extraction with anion exchange and hydrophilic-lipophilic balance materials, was optimized. Extraction efficiencies of solid-phase extraction from 10 and 20 ml samples were about 100%, with average relative standard deviation of 8.9%, in concentration range from 12.5 to 50 ng/ml of the acid. Extraction of aldehydes was less successful, with efficiencies from 69 to 163% and average 10% deviation. Pretreated samples were analysed by reversed phase high performance liquid chromatography with ion trap mass spectrometric detection. Limits of detection achieved for organic acids with the analytical procedure developed ranged from 9 to 27 μg/l of extracted sample, while limits of quantitation were from 31 to 90 μg/l. Oxidation with ozone was used for the preparation of the acid of β-caryophyllene (β-caryophyllinic acid), which was also studied in aerosol samples. MS² experiments were used to confirm the identification of trans-pinic, trans-pinonic and β-caryophyllinic acids. Azelaic, hexadecanoic, cis-pinonic, and cis- and trans-pinic acids were quantitated in the samples with use of authentic standards, while the concentrations of trans-pinonic and β-caryophyllinic acids were determined with cis-pinonic acid as surrogate. Also, the contribution of β-caryophyllene oxidation products to aerosol organic carbon was evaluated. Aldehydes could not be analysed in real samples due to the insufficient extraction. The particle-into-liquid sampler proved to be suitable for the collection of aerosol particles for the elucidation of daily and diurnal variation of selected species. The optimized sample pretreatment, together with the analysis method, offer a promising approach for the study of aerosol chemical composition, where artifact formation is minimal and time resolution is good.     

Ultraviolet resonance Raman spectroscopy as a robust spectroscopic tool for in situ sunscreen analysis

Current techniques being used for sunscreen analysis are incapable of direct determination of the active ingredients in sunscreen formulations. Therefore, the development of methodologies for rapid in situ analysis of sunscreens is desirable. This paper describes the application of ultraviolet resonance Raman spectroscopy (UVRRS) to the direct in situ analysis of sunscreen formulations. High-quality UV resonance Raman spectra were obtained for five sunscreen active ingredients (AIs), mixtures of the AIs and real sunscreen formulation samples. The spectra from the sunscreen formulations gave distinct spectral signatures indicative of the sunscreen AIs in each sample, with essentially no interference from the complex sunscreen matrix. Also, despite the fact that many of the AIs are fluorescent, no fluorescence interferences in the resonance Raman spectra were observed. Excitation wavelength-dependent studies throughout the 244-275 nm region demonstrate that the best discrimination of the AIs was achieved at an excitation wavelength of 244 nm. Thus, by tuning the excitation wavelength within the absorption bands of the AIs, complete identification of these analytes can be achieved in situ without any sample pretreatment or separation. The limit of detection found for a common AI in situ with this technique is 0.23% (w/w), the limit of quantitation is 0.78% (w/w), while the dynamic range is between 0.8% and 50% (w/w). The technique is fast, robust, lacks any major interference, and can be adapted for routine online quality control.     

Rapid quality assessment of Radix Aconiti Preparata using direct analysis in real time mass spectrometry

This study presents a novel and rapid method to identify chemical markers for the quality control of Radix Aconiti Preparata, a world widely used traditional herbal medicine. In the method, the samples with a fast extraction procedure were analyzed using direct analysis in real time mass spectrometry (DART MS) combined with multivariate data analysis. At present, the quality assessment approach of Radix Aconiti Preparata was based on the two processing methods recorded in Chinese Pharmacopoeia for the purpose of reducing the toxicity of Radix Aconiti and ensuring its clinical therapeutic efficacy. In order to ensure the safety and effectivity in clinical use, the processing degree of Radix Aconiti should be well controlled and assessed. In the paper, hierarchical cluster analysis and principal component analysis were performed to evaluate the DART MS data of Radix Aconiti Preparata samples in different processing times. The results showed that the well processed Radix Aconiti Preparata, unqualified processed and the raw Radix Aconiti could be clustered reasonably corresponding to their constituents. The loading plot shows that the main chemical markers having the most influence on the discrimination amongst the qualified and unqualified samples were mainly some monoester diterpenoid aconitines and diester diterpenoid aconitines, i.e. benzoylmesaconine, hypaconitine, mesaconitine, neoline, benzoylhypaconine, benzoylaconine, fuziline, aconitine and 10-OH-mesaconitine. The established DART MS approach in combination with multivariate data analysis provides a very flexible and reliable method for quality assessment of toxic herbal medicine.     

Using the cationic surfactants N-cetyl-N-methylpyrrolidinium bromide and 1-cetyl-3-methylimidazolium bromide for sweeping–micellar electrokinetic chromatography

This paper describes a sweeping–micellar electrokinetic chromatography (sweeping–MEKC) technique for the determination of seven benzodiazepines, using, as sweeping carriers, the ionic liquid-type cationic surfactants 1-cetyl-3-methylimidazolium bromide (C₁₆MIMBr) and N-cetyl-N-methylpyrrolidinium bromide (C₁₆MPYB). These surfactants resemble the commonly employed cationic surfactant cetyltrimethylammonium bromide (CTAB), but they provide different separation efficiencies. We optimized the separation and sweeping conditions, including the pH, the concentrations of organic modifier and surfactant, and the sample injection volume. Adding C₁₆MIMBr or C₁₆MPYB to the background electrolyte enhanced the separation efficiency and detection sensitivity during the sweeping–MEKC analyses of the benzodiazepines. C₁₆MIMBr enhanced the sensitivity for each benzodiazepine 31–59-fold; C₁₆MPYB, 86–165-fold. In the presence of C₁₆MPYB, the limits of detection for the seven analytes ranged from 4.68 to 9.75 ng/mL. We adopted the sweeping–MEKC conditions optimized for C₁₆MPYB to satisfactorily analyze a human urine sample spiked with the seven benzodiazepines. To minimize the matrix effects, we subjected this urine sample to off-line solid phase extraction (SPE) prior to analysis. The recoveries of the analytes after SPE were satisfactory (ca. 77.0–88.3%). Our experimental results reveal that the cationic surfactant C₁₆MPYB exhibits superior sweeping power relative to those of C₁₆MIMBr and CTAB and that it can be applied in sweeping–MEKC analyses for the on-line concentrating and analyzing of benzodiazepines present in real samples at nanogram-per-milliliter concentrations.     

In vivo solid phase microextraction sampling of human saliva for non-invasive and on-site monitoring

On-site sample preparation is an analytical approach based on direct sampling from the system under investigation. It has the advantage of combining sampling and sample preparation into a single step, thus generally is fast, minimizes the potential sources of error and eliminates the risks for analytes instability. For such analysis solid phase microextraction in thin film geometry (TF-SPME) can provide robust and convenient in vivo sampling, offering in the same time faster analysis and higher extraction recovery (i.e., better sensitivity) due to large surface to volume ratio.     

A novel electrochemical sensing strategy for rapid and ultrasensitive detection of Salmonella by rolling circle amplification and DNA–AuNPs probe

A novel electrochemical sensing strategy was developed for ultrasensitive and rapid detection of Salmonella by combining the rolling circle amplification with DNA–AuNPs probe. The target DNA could be specifically captured by probe 1 on the sensing interface. Then the circularization mixture was added to form a typical sandwich structure. In the presence of dNTPs and phi29 DNA polymerase, the RCA was initiated to produce micrometer-long single-strand DNA. Finally, the detection probe (DNA–AuNPs) could recognize RCA product to produce enzymatic electrochemical signal. Under optimal conditions, the calibration curve of synthetic target DNA had good linearity from 10 aM to 10 pM with a detection limit of 6.76 aM (S/N = 3). The developed method had been successfully applied to detect Salmonella as low as 6 CFU mL⁻¹ in real milk sample. This proposed strategy showed great potential for clinical diagnosis, food safety and environmental monitoring.     

A determination method of pristine multiwall carbon nanotubes in rat lungs after intratracheal instillation exposure by combustive oxidation-nondispersive infrared analysis

This paper describes a method for determination of multiwall carbon nanotubes (MWCNTs) in rat lungs after intratracheal instillation exposure. The MWCNTs were quantitatively decomposed to CO₂ by combustive oxidation and were then determined by non-dispersive infrared analysis. Samples were pretreated by acid digestion, muffle ashing and in situ preheating to remove interferences due to coexisting biological carbon from the lung tissue sample, while preserving the MWCNTs as in its their original form. The preservation was confirmed by transmission electron microscopic observation of the pretreated samples of exposed lung tissues and by the fact that the recoveries of MWCNTs spiked to the lung tissues were close to 100%. The detection limit for MWCNTs obtained by the proposed method was 0.30 μg and the repeatability as expressed by the relative standard deviation was 5.6% (n = 4). The method was sufficiently sensitive and precise to apply to real samples of rat lung to investigate the in vivo persistence of intratracheally instilled MWCNTs. To our knowledge, this is the first report of this type of sample pretreatment and direct determination of pristine MWCNTs without modification or tagging. Conventional indirect methods use tagging with other compounds or metal impurities in the CNTs for detection, and the detachment of these tags can increase uncertainties in the determination of the CNTs. The tags can also change how the CNTs persist in vivo, which can lead to an incorrect understanding of the persistence of pristine CNTs in vivo.     

N-Methylimidazolium modified magnetic particles-assisted highly sensitive Escherichia coli detection based on polymerase chain reaction and capillary electrophoresis

Effective bacteria detection and quantification are essential prerequisite for the prevention and treatment of infectious diseases. Herein, we report a method for the detection and quantification of Escherichia coli (E. coli).N-Methylimidazolium modified magnetic particles (MIm-MPs) are synthesized successfully and used as an efficient magnetic material for the isolation and concentration of E. coli. The factors including pH of binding buffer, concentration of elution buffer and elution time which may affect the capture and elution efficiencies are optimized. The linear correlation between bacteria concentration and peak area of polymerase chain reaction (PCR) product analyzed by capillary electrophoresis (CE) is determined. Rapid preconcentration of trace amount of E. coli (10¹ cfu mL⁻¹) in large volume of aqueous sample (500 mL) is achieved, and the capture efficiency can reach 99%. The quantification of bacteria in large volume of spiked tap water and mineral water samples is realized. The recoveries for different concentrations of E. coli in tap and mineral water samples are in the range between 83% and 93%. The results demonstrate that this MIm-MPs-PCR-CE method can be applied to detect and quantify bacteria in real samples.     

Molecular mass concentrations for a powdered SRM sample using a quantitative single particle analysis

In a quantitative single particle analysis, named the low-Z particle EPMA, number concentration data for chemical species encountered in aerosol sample are provided. However, it will be more useful if mass concentration data can be obtained from single particle analysis; i.e., the single particle analysis data for weight fractions of chemical species can be complementarily used in combination with the bulk analysis data, for more clearly understanding the behavior of airborne aerosols. In order to investigate how reliably mass concentration data can be obtained from the low-Z particle EPMA technique, a potassium feldspar powdered standard reference material (SRM), of which elemental weight fractions are well defined by various bulk analytical techniques, was analyzed using the low-Z particle EPMA technique. In this work, it is demonstrated that weight fractions of major elements in the powdered SRM sample obtained by the low-Z particle EPMA are within 8% to the certified values obtained by bulk analytical techniques, although the single particle and bulk analyses employ different approaches. Further, it is shown that the quantitative single particle analysis, i.e., low-Z particle EPMA, can provide molecular mass concentration data for chemical species, which is not easy to obtain using bulk analysis.     

On-line coupling of macroporous resin column chromatography with direct analysis in real time mass spectrometry utilizing a surface flowing mode sample holder

A surface flowing mode sample holder was designed as an alternative sampling strategy for direct analysis in real time mass spectrometry (DART-MS). With the sample holder, the on-line coupling of macroporous resin column chromatography with DART-MS was explored and the new system was employed to monitor the column chromatography elution process of Panax notoginseng. The effluent from macroporous resin column was first diluted and mixed with a derivatization reagent on-line, and the mixture was then directly transferred into the ionization region of DART-MS by the sample holder. Notoginsenosides were methylated and ionized in a metastable helium gas stream, and was introduced into MS for detection. The on-line system showed reasonable repeatability with a relative standard deviation of 12.3% for the peak area. Three notoginsenosides, i.e. notoginsenoside R₁, ginsenoside Rb₁ and ginsenoside Rg₁, were simultaneously determined during the eluting process. The alteration of the chemical composition in the effluent was accurately identified in 9 min, agreeing well with the off-line analysis. The presented technique is more convenient compared to the traditional UPLC method. These results suggest that the surface flowing mode DART-MS has a good potential for the on-line process monitoring in the pharmaceutical industry.     

Electrochemiluminescence biosensor for the assay of small molecule and protein based on bifunctional aptamer and chemiluminescent functionalized gold nanoparticles

An electrochemiluminescence (ECL) biosensor for simultaneous detection of adenosine and thrombin in one sample based on bifunctional aptamer and N-(aminobutyl)-N-(ethylisoluminol) functionalized gold nanoparticles (ABEI-AuNPs) was developed. A streptavidin coated gold nanoparticles modified electrode was utilized to immobilize biotinylated bifunctional aptamer (ATA), which consisted of adenosine and thrombin aptamer. The ATA performed as recognition element of capture probe. For adenosine detection, ABEI-AuNPs labeled hybridization probe with a partial complementary sequence of ATA reacted with ATA, leading to a strong ECL response of N-(aminobutyl)-N-(ethylisoluminol) enriched on ABEI-AuNPs. After recognition of adenosine, the hybridization probe was displaced by adenosine and ECL signal declined. The decrease of ECL signal was in proportion to the concentration of adenosine over the range of 5.0 × 10⁻¹²–5.0 × 10⁻⁹ M with a detection limit of 2.2 × 10⁻¹² M. For thrombin detection, thrombin was assembled on ATA modified electrode via aptamer–target recognition, another aptamer of thrombin tagged with ABEI-AuNPs was bounded to another reactive site of thrombin, producing ECL signals. The ECL intensity was linearly with the concentration of thrombin from 5 × 10⁻¹⁴ M to 5 × 10⁻¹⁰ M with a detection limit of 1.2 × 10⁻¹⁴ M. In the ECL biosensor, adenosine and thrombin can be detected when they coexisted in one sample and a multi-analytes assay was established. The sensitivity of the present biosensor is superior to most available aptasensors for adenosine and thrombin. The biosensor also showed good selectivity towards the targets. Being challenged in real plasma sample, the biosensor was confirmed to be a good prospect for multi-analytes assay of small molecules and proteins in biological samples.     

Structure and absolute configuration of 3-alkylpiperidine alkaloids from an Indonesian sponge of the genus Halichondria

Chemical analysis of an Indonesian sponge sample has provided three new 3-alkylpiperidine alkaloids, tetradehydrohaliclonacyclamine A, its mono-N-oxide derivative, and a 2-epi isomer. The absolute structure of tetradehydrohaliclonacyclamine A has been established by X-ray crystallography from anomalous dispersion effects using Cu radiation, which determined that the absolute configuration is 2S, 3S, 7S, 9S while an HPLC study revealed that the alkaloid is enantiomerically pure.     

First synthesis and characterization of SRR/RSS-Ezetimibe

The two stereoisomers, SRR-Ezetimibe 2 and RSS-Ezetimibe 3 are related substances of the cholesterol absorption inhibitor drug Ezetimibe 1. Herein, we present an efficient and practical synthesis approach to deliver these two stereoisomers for the first time, and a proof of SRR-Ezetimibe 2 by single-crystal X-ray analysis. Our research will be of immense help for organic chemists to study the impurity profile of Ezetimibe 1.     

Free radical and isomerisation processes during the electrochemical fluorination of n-butyryl chloride, i-butyryl chloride and pivaloyl chloride in anhydrous hydrogen fluoride

Electrochemical perfluorination (ECPF) of the title compounds containing primary, secondary and tertiary carbon atoms was carried out in anhydrous hydrofluoric acid (AHF). Detailed analysis of major and minor products suggest that carbon chain isomerisation involving cyclo-propane intermediate is more prevalent during ECPF of i-butyryl chloride when compared to n-butyryl chloride. Simple statistical probability involving free radical intermediates also support this observation. ECPF involving cyclo-propane intermediate is even more prevalent in pivaloyl chloride containing three methyl substituents. In this case, perfluorinated cyclo-propane intermediates were also observed in the product sample. Distribution of minor perfluorinated and partially fluorinated products also suggest the predominant role of normal free radical pathway involving single-electron transfer.     

Solid phase microextraction procedure for the determination of alkylphenols in water by on-fiber derivatization with N-tert-butyl-dimethylsilyl-N-methyltrifluoroacetamide

The solid phase microextraction (SPME) technique with on-fiber derivatization was evaluated for the analysis of alkylphenols (APs), including 4-tert-octylphenol (4-t-OP), technical nonylphenol isomers (t-NPs) and 4-nonylphenol (4-NP), in water. The 85 μm polyacrylate (PA) fiber was used and a two-step sample preparation procedure was established. In the first step, water sample of 2 mL was placed in a 4 mL PTFE-capped glass vial. Headspace extraction of APs in water was then performed under 65 °C for 30 min with 800 rpm magnetic stirring and the addition of 5% of sodium chloride. In the second step, the SPME fiber was placed in another 4 mL vial, which contained 100 μL of N-tert-butyl-dimethylsilyl-N-methyltrifluoroacetamide (MTBSTFA) with 1% tert-butyl-dimethylchlorosilane (TBDMCS). Headspace extraction of MTBSTFA and on-fiber derivatization with APs were performed at 45 °C for 10 min. Gas chromatography/mass spectrometry (GC/MS) was used for the analysis of derivatives formed on-fiber. The adsorption-time profiles were also examined. The precision, accuracy and method detection limits (MDLs) for the analysis of all the APs were evaluated with spiked water samples, including detergent water, chlorinated tap water, and lake water. The relative standard deviations were all less than 10% and the accuracies were 100 ± 15%. With 2 mL of water sample, MDLs were in the range of 1.58-3.85 ng L⁻¹. Compared with other techniques, the study described here provided a simple, fast and reliable method for the analysis of APs in water.     

Biosorption of copper(II), lead(II), iron(III) and cobalt(II) on Bacillus sphaericus-loaded Diaion SP-850 resin

The biosorption of copper(II), lead(II), iron(III) and cobalt(II) on Bacillus sphaericus-loaded Diaion SP-850 resin for preconcentration-separation of them have been investigated. The sorbed analytes on biosorbent were eluted by using 1 mol L⁻¹ HCl and analytes were determined by flame atomic absorption spectrometry. The influences of analytical parameters including amounts of pH, B. sphaericus, sample volume etc. on the quantitative recoveries of analytes were investigated. The effects of alkaline, earth alkaline ions and some metal ions on the retentions of the analytes on the biosorbent were also examined. Separation and preconcentration of Cu, Pb, Fe and Co ions from real samples was achieved quantitatively. The detection limits by 3 sigma for analyte ions were in the range of 0.20-0.75 μg L⁻¹ for aqueous samples and in the range of 2.5-9.4 ng g⁻¹ for solid samples. The validation of the procedure was performed by the analysis of the certified standard reference materials (NRCC-SLRS 4 Riverine Water, SRM 2711 Montana soil and GBW 07605 Tea). The presented method was applied to the determination of analyte ions in green tea, black tea, cultivated mushroom, boiled wheat, rice and soil samples with successfully results.     

The characterization of (+/-)-anti-benzo[a]pyrene diolepoxide-DNA adducts and (+/-)-anti-dibenzo[a,l]pyrene diolepoxide--DNA adducts in the same DNA sample using solid-matrix phosphorescence

Solid-matrix phosphorescence (SMP) spectra and lifetimes were used to characterize the (±)-anti-benzo[a]pyrene diolepoxide [(±)-anti-B[a]PDE] and (±)-anti-dibenzo[a,l]pyrene diolepoxide [(±)-anti-DB[a,l]PDE] bonded to the same sample of DNA. SMP spectra and lifetimes were also acquired for two samples of DNA that had only (±)-anti-B[a]PDE or (±)-anti-DB[a,l]PDE bonded to the individual samples of DNA. A detailed comparison of the SMP properties was made among the three samples of DNA. The SMP excitation spectra for the (±)-anti-B[a]PDE-DNA and the (±)-anti-DB[a,l]PDE-DNA adducts were very similar. However, the SMP emission spectra of the two DNA adduct systems were very dissimilar with a major emission band for the (±)-anti-B[a]PDE-DNA adducts appearing at 613 nm and for the (±)-anti-DB[a,l]PDE-DNA adducts a major band was at 558 nm. It was possible to selectively use SMP emission wavelengths and obtain a SMP excitation of spectrum of the (±)-anti-DB[a,l]PDE-DNA adducts in the dual adducted DNA sample without the (±)-anti-B[a]PDE-DNA adducts emitting SMP. In addition, it was shown that the SMP emission spectrum of the dual adducted DNA sample could be used to detect both adduct systems in the modified DNA sample. It was demonstrated that the SMP lifetimes could be effectively employed to characterize the dual adducted DNA sample. For example, the SMP decay curve for the (±)-anti-DB[a,l]PDE-DNA adducts could be acquired without any SMP emission from the (±)-anti-B[a]PDE-DNA adducts. Also, ln(SMP intensity) versus time plots were very useful in characterizing the dual adducted DNA sample.     

Ultrasonic nebulization extraction coupled with on-line gas chromatography for determination of trans-anethole in spices

Ultrasonic nebulization extraction (UNE) coupled with on-line gas chromatography (GC) was proposed for the determination of trans-anethole in fruits of Illicium verum Hook. f. and Foeniculum vulgare Mill. The extraction was performed in a common self-made extraction system. In the UNE the analyte was transferred and enriched from the solid sample to gas phase. The sample gas containing analyte obtained by UNE was introduced into the sampling loop with the purging gas (N₂). And then the sample gas in the sampling loop was introduced into the GC column. Several experimental parameters of on-line UNE-GC, including sampling time, flow rate of purging gas, standstill time and temperature of tubing, were optimized. The calibration curve ranging from 0.05 to 1.5 mg g⁻¹ for determining the trans-anethole was obtained. The recoveries for determining trans-anethole are between 99.2% and 111.2% and RSDs are less than 8.3% when the UNE was applied. The analytes can rapidly be extracted and transferred from the solid sample to gas phase. The analytes in the gas phase are easier to be introduced into GC system than those in the solid and liquid phase. Compared with off-line systems, the proposed on-line system is more suitable to detect volatile compounds.     

Differential ESI-MS behaviour of highly similar metallothioneins

ESI-MS can only be accepted as a quantification method when using standards with a high resemblance to the analyte(s). Unfortunately, this is usually not applicable to metallothioneins (MTs), a superfamily of singular metal-binding cysteine-rich proteins, present in all living organisms, since the absence of suitable reference material due to the high diversity among metal-MT species precludes their quantification by molecular mass spectrometry. Even thus, it is widely assumed that the intensities of the ESI-MS peaks of similar species are directly correlated with their relative concentration in the sample, and this has been extended to the determination of different MT proteins coexisting in a sample.Practically all organisms contain several MT isoforms, some of them exhibiting highly similar sequences, with conserved coordinating Cys residues. For the current analysis, we used as a model system the MT isoforms of two terrestrial snails (Helix pomatia and Cornu aspersum). Hence, distinct samples were prepared by mixing, at different molar ratios, the recombinant HpCuMT and HpCdMT isoforms from H. pomatia, or the recombinant CaCuMT, CaCdMT and CaCdCuMT isoforms from C. aspersum, and they were analyzed by ESI-MS both at neutral pH (for Zn-loaded MT forms) and at acidic pH (for the corresponding apo-forms). The results here presented reveal that the ESI-MS peak intensity of a single MT species strongly depends on its sensitivity to be ionized, and thus, on the presence or absence of metal ions bound. Furthermore, our data demonstrate that very similar MT isoforms of the same organism with similar pI (ranging from 7.9 to 8.3) can show a clear different sensitivity to ES ionization, something that cannot be readily predicted only by consideration of their amino acid content. In conclusion, even in this optimum case, deductions about quantity features of MT samples drawn from ESI-MS measurements should be carefully considered.