Arylidene Polymers. V. Synthesis,Characterization, and Thermal Studies of New Polydibenzylidenecyclopentanonehydrazides Containing Aliphatic,Aromatic, Azo,Azomethine, and Thianthrene Moieties

A new [(2-oxo-l,3-cyclopentanediylidene)bis(methylidyne-p-phenyleneoxy)]diacetic acid dihydrazide III has been prepared via interaction of 2,5-bis(p-hydroxybenzylidene) cyclopentanone I with ethyl chloroacetate in basic medium to give diester II, followed by hydrazinolysis with hydrazine. The synthesized compounds were confirmed by IR, NMR, and elemental analyses. Unreported poly-hydrazides by the low temperature interfacial polycondensation technique of III with adipoyl, sebacoyl, 4,4′-diphenic, isophthaloyl, terephthaloyl, 4,4′-azodibenzoyl, 3,3′-azodibenzoyl, 4,4′[1,4-phenylene-bis(methylidynenitrilo)]dibenzoyl dichlorides, and 2,7-dichloroformylthianthrene-5,5′,10,10′-teraoxide were prepared. In order to characterize the polymers, a model compound was synthesized from III and benzoyl chloride. The resulting polyhydrazides were confirmed by IR, UV, viscometry, DSC measurements, and thermogravimetric analysis. The crystallinities of all polyhydrazides were investigated by x-ray analysis. The effect of the nature of different moieties on the properties of these polyhydrazides was explored by comparing their physical, spectral, thermal, and x-ray analysis data.     

Synthesis and characterization of new unsaturated polyesters and copolyesters containing azo groups in the main chain

A new interesting class of linear unsaturated polyesters based on dibenzylidenecycloalkanones have been synthesized by interfacial polycondensation of 4,4^′-azodibenzoyl chloride or 3,3^′-azodibenzoyl chloride with: 2,5-bis(p-hydroxybenzylidene)cyclopentanone I, 2,6-bis(p-hydroxybenzylidene)cyclohexanone II, 2,6-divanillylidenecyclohexanone III, or 2,7-bis(p-hydroxybenzylidene)cycloheptanone IV at ambient temperature. The copolyesters are also synthesized from the monomers I, II, III or IV with the diacid chlorides. The resulting polyesters and their copolyesters were characterized by elemental analyses, IR spectroscopy and solubility. Additionally, inherent viscosity of the polyesters in the range 0.32-0.86 dL g⁻¹ and the inherent viscosity of the copolyesters in the range 0.28-0.65 dL g⁻¹ were determined. The UV-visible spectra of certain polymers were measured in m-cresol solution and showed a characteristic absorption band at 435-473 nm due to n-π^* transition. The thermal properties of the polymers were evaluated by thermo gravimetric analysis and differential scanning calorimetry measurements and correlated with their structural units. The crystallinity of some polyesters and copolyesters were tested. In addition, the electrical properties of all polyesters and copolyesters were measured.     

2,5-二苯腙基-1,3,4-噻二唑类化合物的合成及抗腐蚀性能研究

以2,5-二巯基-1,3,4-噻二唑为原料, 与水合肼反应制得2,5-二肼基-1,3,4-噻二唑, 再将其与取代苯甲醛缩合, 得到了6种新的2,5-二苯腙基-1,3,4-噻二唑类化合物, 其结构经元素分析、红外、¹H NMR及质谱等方法所证实. 6种噻二唑衍生物对喷气燃料银片腐蚀有一定的抑制作用.     

Thermal stability and degradation behavior of novel wholly aromatic azopolyamide-hydrazides

Thermal stability and degradation behavior of a series of novel wholly aromatic polyamide-hydrazides containing azo groups in their main chains have been investigated in nitrogen and in air atmospheres using differential scanning calorimetry (DSC), thermogravimetry (TG), infrared spectroscopy (IR) and elemental analysis. The influences of controlled structural variations and molecular weight on the thermal stability and degradation behavior of this series of polymers have also been studied. The structural differences were achieved by varying the content of para- and meta-substituted phenylene rings incorporated within this series. Azopolyamide-hydrazides having different molecular weights of all para-substituted phenylene type units were also examined. The polymers were prepared by a low temperature solution polycondensation reaction of p-aminosalicylic acid hydrazide [PASH] and an equimolar amount of 4,4′-azodibenzoyl chloride [4,4′ADBC] or 3,3′-azodibenzoyl chloride [3,3′ADBC] or mixtures of various molar ratios of 4,4′ADBC and 3,3′ADBC in anhydrous N,N-dimethyl acetamide [DMAc] containing lithium chloride as a solvent at −10 °C. All the polymers have the same structural formula except the mode of linking phenylene units in the polymer chain. The results clearly reveal that these polymers are characterized by high thermal stability. Their weight loss occurred in three distinctive steps. The first was small and assigned to the evaporation of absorbed moisture. The second was appreciable and was attributed to the cyclodehydration reaction of the hydrazide groups into 1,3,4-oxadiazole rings by losing water, combined with elimination of azo groups by losing molecular nitrogen. This is not a true degradation but rather a thermo-chemical transformation reaction of the azopolyamide-hydrazides into the corresponding polyamide-1,3,4-oxadiazoles. The third was relatively severe and sharp, particularly in air, and corresponded to the decomposition of the resulting polyamide-1,3,4-oxadizoles. In both degradation atmospheres, the improved resistance to high temperatures was always associated with increased content of para-phenylene moieties of the investigated polymer. The better thermal stability of the wholly para-oriented type of polymer relative to the other polymers is attributed to its greater chain symmetry which is responsible for its greater close packing, rod-like structure and consequently stronger intermolecular bonds which would be more difficult to break and therefore more resistance to high temperatures. Further, with exception of 160-200 °C temperature range, where the lower molecular weight samples showed considerable weight losses which were most probably due to hydrogen bonded DMAc, all the wholly para-oriented phenylene type of polymer samples behaved similarly regardless of their respective molecular weight. This seems to indicate that the structural building units responsible for high thermal stability of the polymers are their characteristic groups, such as aromatic moieties, amide and hydrazide linkages in case of azopolyamide-hydrazides, and 1,3,4-oxadiazole rings, aromatic nuclei and amide linking bonds in case of polyamide-1,3,4-oxadiazoles, rather than the longer chain segments.     

Novel highly soluble 3,3′-bicarbazolyl based polymers for optoelectronics

Novel family of highly soluble polymers containing 3.3′-bicarbazolyl moieties is reported. Utilizing simple and efficient chemical oxidation of carbazole and its derivatives by iron trichloride exclusively and quantitatively yields the bicarbazolyl dimmers with reactive oxirane groups. The polymers were prepared in polyaddition reaction of bicarbazolyl-containing diepoxydes with 4,4′-thiobisbenzenethiol, 2,5-dimercapto-1,3,4-thiadiazole, or 1,3-benzenedithiol in the presence of catalyst triethylamine. Obtained compounds were characterized using GPC, DSC, IR, UV, fluorescence and ¹H NMR spectroscopy. The hole drift mobility reaches 10⁻⁴ cm²/Vs at high electric fields. Such processable polymers with conjugated-nonconjugated repeating units in the main chain and good charge carrier mobility are quite promising for fabrication of optoelectronic devices.     

Spectroscopic, thermal and structural studies of cocrystal of 2,2′-diamino-4,4′-bis(1,3-thiazole) with 4,4′-bipyridine, 1,2-bis(4-pyridyl)ethylene and 1,3-bis(4-pyridyl)propane

Three new cocrystals based upon 2,2′-diamino-4,4′-bis(1,3-thiazole) (DABTZ) with 4,4′-bipyridine (4,4′-bipy), 1,2-bis(4-pyridyl)ethylene (bpe) and 1,3-bis(4-pyridyl)propane (bpp): [(DABTZ) (4,4′-bipy)], [(DABTZ) (bpe)] and [(DABTZ) (bpp)] have been synthesized and characterized by elemental analysis, IR-, ¹H NMR-, ¹³C NMR spectroscopy and studied by thermal and X-ray crystallography. Self-assembly of these compounds in the solid state is likely caused by both hydrogen bonding, and π-π stacking.     

Synthesis and properties of diaminothiadiazoles

Refined synthetic procedure for preparation of 3,5-diamino-1,2,4-thiadiazole and 2,5-diamino-1,3,4-thiadiazole based on the reaction of dithiourea or amidinothiourea with hydrogen peroxide is developed. The optimal reagents ratio was found, and monitoring methods were developed. It resulted in the increase of the target product yield and in a shorter reaction time. On the basis of 2,5-diamino-1,3,4-thiadiazole the alkylsubstituted 1,3,4-diaminothiadiazolidines were synthesized. The compounds prepared were characterized by the elemental analysis data, the IR, ¹H NMR, and electronic spectra, and also by mass spectrometry.     

Some aromatic polyimides based on diamines containing hydrazo group and ether linkages

Three new hydrazo-bridged diamines, 4,4′-bis [4-(4-aminophenyloxy) phenylhydrazyl] biphenyl (BPD-2), 4,4′-bis [4-(4-aminophenyloxy) phenylhydrazyl] biphenyl ether (SPD-2) and 4,4-bis [4-(4-aminophenyloxy) phenyl] hydrazine (APD-2), were synthesized by the reduction of three azo-diols, 4,4′-bis (4-azo-1-hydroxyphenyl) biphenyl (BPD), 4,4′-bis (4-azo-1-hydroxyphenyl) biphenyl ether (SPD) and azo-4-hydroxybenzene (APD), and polymerized with pyromellitic dianhydride (PM), 3,3′,4,4′-benzophenone tetracarboxylic acid dianhydride (BP) and 3,4,9,10-perylenetetracarboxylic acid dianhydride (PR) either by one-step solution polymerization or by two-step procedure which includes ring-opening polyaddition to give poly(amic acid) followed by cyclic dehydration to polyimide. The monomers and polyimides were characterized by their elemental analyses, FTIR and ¹H NMR spectroscopy. Glass transition temperatures of the polymers are quite high (175-310 °C), characteristic of polyimides. The decomposition temperatures for 10% weight loss fall in the range of 280-575 °C in nitrogen. Activation energies of pyrolysis for each of the polymers calculated from Horowitz and Metzger's method are also high (52.54-95.28 kJ mol⁻¹). The inherent viscosities of the polyimides at a concentration of 0.5 g/dl in DMF range from 0.94 to 1.93 dl/g.     

Synthesis and characterization of 1,3,4-oxadiazole-containing polyazomethines

Novel 1,3,4-oxadiazole-containing polyazomethines were synthesized by the polycondensation of diamines, 2,5-bis (m-aminophenyl)-1,3,4-oxadiazole (BMAO) and 2,5-bis (p-aminophenyl)-1,3,4-oxadiazole (BPAO), with aromatic dialdehydes, isophthalaldehyde and terephthalaldehyde, in m-cresol at 20°C. These polymers were yellow to orange in color and had reduced viscosities up to 1.13 dL/g and electric conductivity as high as 10^?11?10^?12 S cm^?1. All the polyazomethines were insoluble in common organic solvents but dissolved in concentrated sulfuric acid. Thermogravimetry showed that thermal degradation started at around 400°C in air and nitrogen atmospheres. Doping with iodine markedly increased the conductivity and produced the black-colored semiconductive polyazomethines with a maximum conductivity of the order of 10^?6 S cm^?1. Electronic spectra of the undoped polymers indicated a large bathochromic shift of the absorption maxima due to C?N bonds of the monomer diamines (285 nm for BMAO and 315 nm for BPAO). This suggests that π-electrons of the polymers are extensively delocalized along the main chain.     

Reaction of 1,3,4-thiadiazol-2,5-dithiol with <Emphasis Type="Italic">N</Emphasis>-acryloyl-substituted derivatives of several alkaloids

Potentially bioactive 2,5-bis derivatives of 1,3,4-thiadiazole with alkaloid moieties were synthesized by reaction of 1,3,4-thiadiazol-2,5-dithiol with N-acryloyl-substituted derivatives of the alkaloids anabasine, cytisine, and D-pseudoephedrine.     

Synthesis of 3,6-bisubstituted phenyl-bi-1,2,4-triazolo[3,4-b]-1,3,4-thiadiazole derivatives

2,5-Bihydrazino-1,3,4-thiadiazole (2) was synthesized by condensation of 2,5-bimercapto-1,3,4-thiadiazole (1) with hydrazine hydrate, and compound 2 reacted with acyl chloride to give 2,5-biacylhydrazino-1,3,4-thiadiazole derivatives (3a–3e). Ring closure of compounds 3a–3e was achieved with POCl3 as the cyclization agent giving 3,6-bisubstituted phenyl-bi-1,2,4-triazolo[3,4-b]-1,3,4-thiadiazole derivatives (4a–4e), respectively. The novel compounds were identified by elemental analysis, and by infrared (IR), 1H-nuclear magnetic resonance (NMR), and mass (MS) spectrometry. The mechanism of the cyclization is also discussed. __________ Translated from Organic Chemistry, 2006, 26(12): 1720–1722 [译自: 有机化学]     

Poly(1,3,4-oxadiazole-ether-imide)s and their polydimethylsiloxane-containing copolymers

Poly(1,3,4-oxadiazole-ether-imide)s were prepared by thermal imidization of poly(amic-acid) intermediates resulting from the solution polycondensation reaction of a bis(ether-anhydride), namely 2,2′-bis-[(3,4-dicarboxyphenoxy)phenyl]-1,4-phenylenediisopropylidene dianhydride, with different aromatic diamines containing 1,3,4-oxadiazole ring, such as 2,5-bis(p-aminophenyl)-1,3,4-oxadiazole, 2,5-bis[p-(4-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2-(4-dimethylaminophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole. Poly(1,3,4-oxadiazole-ether-imide)-polydimethylsiloxane copolymers were prepared by polycondensation reaction of the same bis(ether-anhydride) with equimolar quantities of an aromatic diamine having 1,3,4-oxadiazole ring and a bis(aminopropyl)polydimethylsiloxane oligomer of controlled molecular weight. A solution imidization procedure was used to convert quantitatively the poly(amic-acid) intermediates to the corresponding polyimides. All the polymers were easily soluble in polar organic solvents such as N-methylpyrrolidone and N,N-dimethylacetamide. The polymers showed good thermal stability with decomposition temperature being above 400 °C. Solutions of some polymers in N-methylpyrrolidone exhibited blue fluorescence, having maximum emission wavelength in the range of 370-412 nm.     

New polyamides containing azobenzene unites and hydantoin derivatives in main chain: synthesis and characterization

Eight new polyamides containing azo moieties and hydantoin groups were synthesized under microwave irradiation by using a domestic microwave oven from the polycondensation reactions of 4,4^′-azodibenzoyl chloride [4,4^′-azobenzenedicarboxylic acid] 3 with eight different derivatives of 5,5-disubstituted hydantoin 4a-h in the presence of a small amount of a polar organic medium such as o-cresol. The polycondensation proceeded rapidly, compared with the bulk polycondensation and the solution polycondensation and was completed between 7-12 min, producing a series of new polyamides 5a-h in high yield, and inherent viscosity between 0.35 and 0.60 dL/g. The resulting polyamides were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis (TGA and DTG), solubility test and FT-IR spectroscopy. All of the polymers were soluble at room temperature in polar solvents such as N,N-dimethylacetamide, N,N-dimethylformamide, dimethylsulfoxide, tetrahydrofurane and N-methyl-2-pyrrolidone.     

Thermotropic liquid crystalline polymers containing five-membered heterocyclic groups IX. Synthesis and optical properties of liquid crystalline semi-rigid polyesters composed of a quinquephenyl analogue containing 1,3,4-thiadiazole and aliphatic chains

Novel semi-rigid polyesters containing a quinquephenyl analogue containing 1,3,4-thiadiazole and a central 1,3-phenylene unit in the main chain were synthesized by high temperature solution polycondensation of a dimethyl ester derivative of 1,3-bis(5-phenyl-1,3,4-thiadiazol-2-yl)benzene with an aliphatic (octa-, deca- and dodecamethylene) diol. The proposed structures were confirmed using FTIR and ¹H NMR spectroscopies, and elemental analyses; their liquid crystalline and photoluminescent (PL) properties were examined by means of differential scanning calorimetry, optical texture observations using polarizing microscopy, powder X-ray diffraction, and UV-vis and PL spectra measurements. These measurements showed that the polymers not only show a monotropic solid smectic or disordered crystal phase, but also PL properties with blue emission in HFIP solutions and in the solid phase, Stokes shifts of 116.5–119?nm being observed.     

N-H?S hydrogen bonding in 2-mercapto-5-methyl-1,3,4-thiadiazole. Synthesis and crystal structures of mercapto functionalised 1,3,4-thiadiazoles

The synthesis and crystal structures of three mercapto functionalised 1,3,4-thiadiazoles and the crystal structure of 2-mercapto-5-methyl-1,3,4-thiadiazole are described. In the solid state, 2-mercapto-5-methyl-1,3,4-thiadiazole 1 forms a thioamide tautomer as shown by FTIR and Raman spectroscopy as well as X-ray crystallography and as theoretically predicted. The molecules are connected to form chains via N-H?S hydrogen bonds with N?S=328.3 pm. Bis(2-methyl-1,3,4-thiadiazolyl)-5,5′-disulfide 2, the disulfide of 1, as well as 2-(tert-butyldithio)-5-methyl-1,3,4-thiadiazole 3 and 2,5-bis(tert-butyldithio)-1,3,4-thiadiazole 4 have been synthesised and characterised by vibrational spectroscopy and X-ray diffraction.     

Synthesis and comparative study of the heterocyclic rings on liquid crystalline properties of 2,5-aryl-1,3,4-oxa(thia)diazole derivatives containing furan and thiophene units

A series of heterocyclic liquid crystalline compounds containing 1,3,4-oxadiazole/thiadiazole, furan and thiophene units were synthesised and characterised by means of electrospray ionisation-mass spectrometry (ESI-MS), high-resolution mass spectroscopy (HRMS), ¹H nuclear magnetic resonance (NMR) and ¹³C NMR. The thermal behaviours were investigated by differential scanning calorimetry (DSC) and polarised optical microscopy (POM). The effect of the 1,3,4-oxadiazole, 1,3,4-thiadiazole, furan, thiophene and benzene rings on the liquid crystalline properties was discussed briefly in context with the geometrical and electronic factors. The results showed that the tendency to form mesophases follows the sequence: 1,4-disustituted benzene >2,5-disubstituted thiophene >2,5-disustituted furan and 1,3,4-thiadiazole >1,3,4-oxadiazole.     

含硫杂环桥联的高折射率聚酰亚胺的合成与性能

合成了两种含硫杂环桥联的芳香族二胺单体,2,5-双(4-氨基苯硫基)噻吩(APST)以及2,5-双(4-氨基苯硫基)-1,3,4-噻二唑(BATT).分别采用这两种二胺单体与含硫二酐单体4,4′-双(3,4-二羧基苯硫基)二苯硫醚二酐(3SDEA)通过两步聚合法制备了两种聚酰亚胺(PI),PI-1(3SDEA-APST)与PI-2(3SDEA-BATT).系统研究了含硫杂环对PI耐热性能以及光学性能的影响.研究结果表明,与苯环相比,含硫杂环的引入在一定程度上降低了PI薄膜在可见光区(400～700nm)的光学透明性以及耐热稳定性.PI-1与PI-2薄膜的起始热分解温度(T5%)分别为418℃与466℃.PI薄膜在450nm处的透光率低于50%.但是含硫杂环的引入可以显著提高PI薄膜的折射率.PI-1与PI-2的折射率分别为1.7527和1.7490.两种材料的双折射均小于0.01.     

New Polymer Syntheses Part 60: A Facile Synthetic Route to Polyamides Based on Thieno[2,3-<Emphasis Type="Italic">b</Emphasis>]thiophene and Their Corrosion Inhibition Behavior

Polyamides containing thieno[2,3-b]thiophene moiety were prepared via a simple polycondensation reaction of the diaminothieno[2,3-b]thiophene monomer 1a with different kinds of diacid chlorides (including oxalyl, adipoyl, sebacoyl, isophthaloyl, terephthaloyl, 4,4′-azodibenzoyl, 3,3′-azodibenzoyl, p-phenylene diacryloyl) in the presence of LiCl and NMP as a solvent through lowtemperature solution polycondensation. The chemical structures of model compound and synthesized polyamides were confirmed by FTIR, nuclear magnetic resonance spectroscopy (including ¹H-NMR and ¹³C-NMR) and elemental analysis. In addition, the thermal stability, crystallinity structure and surface morphology of synthesized polyamides were characterized via thermogravametric analysis (TGA), wide-angle X-ray diffraction analysis (WAXD) and scanning electron microscopy (SEM). Also, the corrosion inhibition behavior of selected examples of polyamides was investigated; the inhibitive effect of the investigated polymers for carbon steel in 1.0 mol·L^?1 HCl was studied using potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS) methods. PDP results displayed that the polyamides containing thieno[2,3-b]thiophene moiety can be as mixed-type inhibitors. The inhibition efficiency (P, %) was found to be in the range from 67.13% to 96.01%. There is an increase in P by the synthesized polymers in comparison to the starting monomer. The adsorption of these polymers was found to obey Langmuir adsorption isotherm.     

Novel self-dyed wholly aromatic polyamide–hydrazides covalently bonded with azo groups in their main chains

Thermal characteristics of several novel self-dyed wholly aromatic polyamide–hydrazides covalently bonded with azo groups in their main chains and containing o-hydroxy group as a substituent group in the aryl ring of the aminohydrazide part of the polymers have been investigated in nitrogen and in air atmospheres using differential scanning calorimetry, thermogravimetric analyses, infrared spectroscopy, and elemental analyses. The effect of introducing different predetermined proportions of para- and meta-phenylene moieties into the backbone chain of the polymers on their thermal characteristics has been evaluated. Azopolymers having different molecular masses of all para-oriented phenylene type units were also thermally characterized. These polymers were prepared by a low temperature solution polycondensation reaction of either 4-amino-3-hydroxybenzhydrazide or 3-amino-4-hydroxybenzhydrazide with an equimolar amount of either 4,4′-azodibenzoyl chloride (4,4′ADBC), 3,3′-azodibenzoyl chloride (3,3′ADBC), or mixtures of various molar ratios of 4,4′ADBC and 3,3′ADBC in anhydrous N,N-dimethyl acetamide containing 3 % m v^?1 LiCl as a solvent at ?10 °C. All the polymers have the same structural formula except the mode of linking phenylene units in the polymer chain. The content of para- and meta-phenylene moieties was varied within these polymers so that the changes in the latter were 10 mol% from polymer to polymer, starting from an overall content of 0–100 mol%. The results reveal that these polymers are characterized by high thermal stability and could be cyclodehydrated into linear aromatic polymers with alternating 1,3,4-oxadiazole and benzoxazole structural units within the same polymer approximately in the region of 200–480 °C, either in nitrogen or in air atmospheres by losing water from the hydrazide and o-hydroxybenzamide groups, respectively. Along with the cyclodehydration, the polymer may lose molecular nitrogen from the azo groups. This is not a true degradation, but rather a thermo-chemical transformation reaction of the evaluated polymers into the corresponding poly(1,3,4-oxadiazolyl-benzoxazoles). The resulting poly(1,3,4-oxadiazolyl-benzoxazoles) start to decompose in the temperature range above 330–560 °C, either in nitrogen or in air atmospheres without mass loss at a lower temperature. The thermal and thermo-oxidative stabilities of the polymers are affected by the nature and amount of arylene groups incorporated into their chains, being higher for polymers with greater content of para-oriented phenylene rings, which permits more interchain hydrogen bonds as a result of greater chain symmetry, packing efficiency, and rod-like structure. Increasing the content of para-oriented phenylene rings leads to a strong improvement in both the initial decomposition temperature as well as in the residual mass at a particular temperature. The stability of the polymers was found to be independent of their molecular masses. This confirms that high thermal stability is not a polymer property which would depends upon the length of its macromolecular chains, but rather upon its chemical structure in which all and every atomic group contributes by its own thermal stability to the macroscopic properties of the whole polymer.     

Rapid synthesis of optically active poly(amide-imide)s by direct polycondensation of aromatic dicarboxylic acid with aromatic diamines

4,4^′-(Hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine-p-amidobenzoic acid) (2) was prepared from the reaction of 4,4^′-(hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine) diacid chloride with p-aminobenzoic acid. The direct polycondensation reaction of monomer (2) with p-phenylenediamine (2a), 4,4^′-diaminodiphenylsulfone (2b), 2,4-diaminotoluene (2c), 2,6-diaminopyridine (2d), m-phenylene diamine (2e), benzidine (2f), 4,4^′-diaminodiphenylether (2g) and 4,4^′-diaminodiphenyl methane (2h) was carried out in a medium consisting of triphenyl phosphite, N-methyl-2-pyrolidone, pyridine, and calcium chloride. The homogeneous mixture was heated at 220 °C for 1 min under nitrogen. The resulting poly(amide-imide)s (PAIs) having inherent viscosities 0.27-0.78 dl/g were obtained in high yield and are optically active and thermally stable. All of the above polymers were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of this new optically active PAIs are reported.