Synthesis and properties of poly(aryl ether ether ketone) copolymers with pendant methyl groups

Polyether ether ketone and polyether ether ketone copolymers were prepared by the nucleophilic substitution reaction of 4,4′-difluorobenzophenone with hydroquinone and with varying mole proportions of hydroquinone and methyl hydroquinone using sulfolane solvent in the presence of anhydrous K₂CO₃. The polymers were characterised by different physico-chemical techniques. The crystallinity of the polymers was found to decrease with increase in concentration of the methyl hydroquinone units in the polymer. Thermogravimetric studies showed that all the polymers were stable upto 430 °C with a char yield above 49% at 900 °C in N₂ atmosphere. The glass transition temperature was found to increase and the crystalline melting temperature and activation energy were found to decrease with increase in concentration of the methyl hydroquinone units in the polymer.     

A novel class of organosoluble poly(arylene ether nitrile) copolymers containing methyl substituent and cardo xanthene moiety

9,9‐Bis(3‐methyl‐4‐hydroxyphenyl)xanthene (BMHPX) was synthesized in 72% yield by a HCl/ZnCl₂‐catalyzed condensation reaction of xanthenone with excess o‐cresol. Based on this new bisphenol monomer, a series of poly(arylene ether nitrile) (PAEN) and PAEN copolymers containing methyl substituent and cardo xanthene moiety were prepared by the nucleophilic substitution reaction of 2,6‐difluorobenzonitrile (DFBN) with BMHPX and with varying mole proportions of BMHPX to hydroquinone (HQ) (100/0–40/60) using N‐methyl‐2‐pyrrolidone (NMP) as solvent in the presence of anhydrous potassium carbonate. These polymers had inherent viscosities between 0.54 and 0.72 dl/g, and their weight‐average molecular weights and number‐average molecular weights were in the range of 32,600–36,400 and 17,300–18,300, respectively. All PAENs were amorphous and were soluble in dipolar aprotic solvents such as NMP and N,N‐dimethylacetamide (DMAc), and even in THF and chloroform at room temperature. The resulting polymers showed glass transition temperatures (T_g's) between 213–226°C, and the T_g values of the copolymers were found to increase with increase of the BMHPX units content in the polymer. Thermogravimetric studies showed that all the polymers were stable up to 404°C, with 10% weight loss temperatures ranging from 444 to 455°C, and char yields of 52–58% at 700°C in nitrogen. All new PAENs could be cast into transparent, strong, and flexible films with tensile strengths of 102–120 MPa, elongations at break of 14–18%, and tensile moduli of 3.3–3.7 GPa. Copyright © 2011 John Wiley & Sons, Ltd.     

Photoinduced optical anisotropy in azobenzene methacrylate block copolymers: Influence of molecular weight and irradiation conditions

The photoinduced anisotropy in a series of azomethacrylate block copolymers with different molecular weights and azo contents has been investigated under several irradiation conditions. Depending on molecular weight and composition, different microstructures (disordered, lamellar, spherical) appear, due to block microsegregation. Measurements of birefringence (Δn) induced with linearly polarised 488 nm light show that the highest (and stable) Δn_N values (birefringence normalised to the azo content) are achieved in copolymers with a lamellar structure. Lower Δn_N are obtained in the copolymers in which azobenzene units segregate to nano spheres and the lowest (and less stable) Δn_N values, appear in disordered systems not showing any defined microstructure. Besides, higher Δn_N is obtained in the copolymers with larger molecular weight of the poly (methyl methacrylate) and the azo polymer blocks, both in the microspheres segregated polymers as well as in those without a clear microstructure. This behaviour is consistent with that of the photoinduced order of azobenzene units obtained from dichroism measurements. Irradiation temperature (from 30 to 90 °C) and light power (from 100 to 500 mW/cm²) also influence the photoinduced response. Photoinduced Δn_N growth rate is faster when both temperature and irradiation power increase. Furthermore, birefringence is only induced at temperatures up to 90 °C, the maximum value being obtained at about 70 °C. No clear dependence of the final Δn_N value with light power has been found.     

Structure-property relationships for novel wholly aromatic polyamide-hydrazides containing various proportions of para-phenylene and meta-phenylene units: I. Synthesis and characterization

A series of novel wholly aromatic polyamide-hydrazides was synthesized by a low temperature solution polycondensation reaction of either 4-amino-3-hydroxybenzhydrazide or 3-amino-4-hydroxybenzhydrazide with an equimolar amount of either terephthaloyl chloride (TCl), isophthaloyl chloride (ICl), or mixtures of various molar ratios of TCl and ICl in anhydrous N,N-dimethylacetamide (DMAc) as a solvent. Polymer structures were identified by elemental analysis and infrared spectroscopy. All the polymers have the same structural formula except the way of linking phenylene units inside the polymer chain. The content of para- and meta-phenylene moieties was varied within this series so that the changes in the latter were 10 mol % from polymer to polymer, starting from an overall content of 0-100 mol %. The prepared polymers were characterized for their properties in order to acquire clear understanding of the influence exerted by controlled structural variations in these polymers upon some of important properties, such as solubility, intrinsic viscosity, moisture regain, mechanical properties and thermal as well as thermo-oxidative stability. The polymers were readily soluble in several organic polar solvents such as DMAc, N,N-dimethylformamide, dimethyl sulphoxide, N-methyl-2-pyrrolidone and hexamethyl phosphoramide and could be cast into flexible films. Their solubilities were found to increase remarkably with introduction of meta-phenylene moieties into the polymer chains. Their intrinsic viscosities ranged from 0.73 to 4.83 dl g⁻¹ in DMAc at 30 °C and increased with the increase of para-phenylene units content. Mechanical properties of the films produced from these polymers are improved markedly by substitution of para-phenylene units for meta-phenylene units. Thermogravimetric studies revealed that the completely para-oriented type of polymer has better thermal and thermo-oxidative stability relative to that of the other polymers. Moreover, the results reveal that the prepared polymers have a great affinity to water sorption. The hydrophilic character increases as a function of meta-oriented phenylene rings incorporated into the polymer chains.     

Thermal stability and high glass transition temperature of 4-chloromethyl styrene polymers bearing carbazolyl moieties

A new styrene derivative monomer, 4-(N-carbazolyl)methyl styrene (CzMS), was synthesized by reacting 4-chloromethyl styrene with carbazole in the presence of sodium hydride. Then, CzMS was homopolymerized and copolymerized with different monomers such as methyl methacrylate (MMA), ethyl methacrylate (EMA), methyl acrylate (MA), ethyl acrylate (EA) and n-butyl acrylate (BA) by free radical polymerization method in N,N-di-methylformamide (DMF) solution at 70 ± 1 °C using azobisisobutyronitrile initiator to give the copolymers I-V in good yields. The structure of all the resulted polymers was characterized and confirmed by FT-IR, ¹H NMR and ¹³C NMR spectroscopic techniques. The average molecular weight and glass transition temperature of polymers were determined using gel permeation chromatograph (GPC) and differential scanning calorimeter (DSC) instruments, respectively. It was found that these polymers with carbazole moieties have high thermal stability and the presence of bulk carbazole groups in polymer side chains leads to an increase in the rigidity and glass transition temperature of polymers.     

Aromatic polyamides with pendent acetoxybenzamide groups and thin films made therefrom

New aromatic polyamides containing 1,3,4-oxadiazole or benzonitrile units in the main chain and 5-(4-acetoxybenzamido) groups in the side chain have been synthesized and their properties have been characterized and compared with those of related polyamides and polyoxadiazole-amides. These polymers show good thermal stability, with initial decomposition temperature being at about 300 °C and glass transition temperature in the range of 260-280 °C. They are easily soluble in certain solvents such as N-methylpyrrolidinone (NMP), N,N^′-dimethylacetamide (DMA) and N,N^′-dimethylformamide (DMF) and can be cast from solutions into thin flexible films. The polymer films had tensile strengths in the range of 77-97 MPa, tensile moduli in the range of 2.3-2.6 GPa and elongation at break values ranging from 6% to 24%. One of the polymers containing the 1,3,4-oxadiazole ring exhibited blue fluorescence.     

High Tg nematic thermosets: Synthesis, characterization and thermo-mechanical properties

In this paper the synthesis and characterization of a new family reactive nematic oligomers based on 4-hydroxybenzoic acid (4-HBA) will be presented. We modified the backbone using para- and meta-substituted aromatic monomers such as terephthalic acid (TA), isophthalic acid (IA), hydroquinone (HQ), resorcinol (RS), 4,4′-bisphenol (BP) and 3-hydroxybenzoic acid (3-HBA). All oligomers, with a target M_n of 5000 and 9000 g mol⁻¹, were end-capped with reactive phenylethynyl functionalities and synthesized using standard melt condensation techniques. Curing of the phenylethynyl reactive functionalities proceeds through chain extension and crosslinking, depending upon the temperature and time and can be carried out between 310 and 400 °C. Fully cured nematic thermosets could be obtained with glass-transition temperatures previously not accessible (T_g > 400 °C). The cured polymers exhibit excellent tensile properties, i.e. tensile strength (83 MPa) and elongation at break (9%). This approach allows us to prepare all-aromatic polymers with a combination of useful properties such as ease of processing, high T_g’s, and excellent mechanical properties.     

High glass transitions of novel organosoluble polyamide-imides based on noncoplanar and rigid diimide-dicarboxylic acid

A series of novel polyamide-imides (PAIs) with high glass transition temperature were prepared from diimide-dicarboxylic acid, 2,2′-bis(trifluoromethyl)-4,4′-bis(trimellitimidophenyl)biphenyl (BTFTB), by direct polycondensation with various diamines in N-methyl-2-pyrrolidinone using triphenyl phosphite and pyridine as condensing agents in the presence of dehydrating agent (CaCl₂). The yield of the polymers was obtained was high with moderate to high inherent viscosities (0.80-1.03 dL g⁻¹). Gel permeation chromatography (GPC) of the polymers showed number-average and weight-average molecular weights up to 8.6 × 10⁴ and 22 × 10⁴, respectively. The PAIs were amorphous in nature. Most of the polymers exhibited good solubility in various solvents such as N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), pyridine, cyclohexanone and tetrahydrofuran. The polymer films had tensile strength in the range of 79-103 MPa, an elongation at break in the range of 6-16%, and a tensile modulus in the range between 2.1 and 2.8 GPa. The glass transition temperatures of the polymers were determined by DMA method and they were in the range of 264-291 °C. The coefficients of thermal expansion (CTE) of PAIs were determined by TMA instrument and they were between 29 and 67 ppm °C⁻¹. These polymers were fairly thermally stable up to or above 438 °C, and lose 10% weight in the range of 446-505 °C and 438-496 °C, respectively, in nitrogen and air. These polymers had exhibited 80% transmission wavelengths which were in the range of 484-516 nm and their cutoff wavelengths were in between 418 and 434 nm. The PAIs with trifluoromethyl group have higher bulk density resulting in higher free volume and then lowering the dielectric constant.     

Thermal chemiluminescence of fibrous proteins

Thermal chemiluminescence (TCL) from the fibrous proteins wool and feather keratin, silk fibroin and Type I collagen is reported for the first time. The proteins all emit TCL when heated in the atmosphere of O₂ or N₂ in the range 40-220 °C. Plotting non-isothermal CL data in O₂ in Arrhenius format showed an increase in the activation energy at temperatures in the range 129-161 °C for each protein. This may indicate that a different free radical oxidation process operates when the mobility of the amorphous phase of the protein is increased above its T_g. Wool, silk and collagen exhibited a luminescence peak at 130 °C (with feather keratin at 145 °C) during non-isothermal CL experiments in N₂, similar to that observed in many synthetic polymers and characteristic of polymer hydroperoxides.     

Synthesis of precursors of poly(acryl amides) by copper mediated living radical polymerization in DMSO

The paper describes the optimization of copper(I) mediated living radical polymerization of N-hydroxysuccinimide methacrylate to achieve AB block copoly(acryl amides) offering a route to polymers with potential biomedical applications. Polymerization of N-hydroxysuccinimide methacrylate was carried out using copper(I) bromide/N-(n-propyl)-2-pyridylmethanimine catalyst with ethyl-2-bromoisobutyrate as the initiator at three different temperatures (70, 50 and 30 °C). Polymerizations at both 70 and 50 °C gave relatively high conversion, 72% and 62% respectively after 4 h. Polymerization at 30 °C the best linear first-order kinetic plot. The polydispersity remained narrow (1.15) and there was a good agreement between experimental, determined by ¹H NMR, and theoretical M_n. Polymerization of N-hydroxysuccinimide methacrylate was investigated in more detail by following reactions in situ by ¹H NMR. The experimental values of M_n (NMR) were quite close to the theoretical values and the polydispersities were relatively narrow (1.10-1.19). Isolated poly(N-hydroxysuccinimide methacrylate) was used as a macroinitiator for the polymerization of MMA catalyzed by Cu(I)Br in conjunction with N-(n-propyl)-2-pyridylmethanamine ligand leading to block copolymers. A poly(methyl acryl amide) is synthesized indirectly from the reaction of benzyl amine with poly(N-hydroxysuccinimide methacrylate) for 5 h with in DMSO at 50 °C under nitrogen.     

Influence of hydrophobe content on the solution rheology of hydrophobically modified terpolymer of SO2, N,N-diallyl-N-carboethoxymethylammonium chloride

Rheological properties of hydrophobically modified copolymer of SO₂, N,N-diallyl-N-carboethoxymethylammonium chloride and the hydrophobic monomer N,N-diallyl-N-octadecylammonium chloride were studied. The influence of hydrophobe content (HP) and polymer concentration was investigated. Polymers with HP content in the range 1.5-5% were examined and the concentration was varied in the range 2-5 wt%. Both dynamic and steady-shear experiments were performed in ARES rheometer. Copolymers were observed to exhibit typical viscoelastic behavior even with low HP content. Both the dynamic viscosity, η′ and storage modulus, G′, increase with the increase of both the polymer concentration and the HP content of the system. The viscosity of the high HP content polymer showed a strong shear dependency, while G′ was a weak function of frequency and gel-like behavior was observed. The zero-shear viscosity, η₀, showed a strong concentration dependency (η₀ ∼ ?^α; 1.1 < α < 5.9). The concentration dependency of η₀ suggests that intermolecular association is dominant in the high HP content polymer. Control of the HP content and polymer concentration of this class of polymers can lead to a wide range of interesting rheological properties.     

Cloud points and phase separation of aqueous poly(N-vinylacetamide) solutions in the presence of salts

Aqueous poly(N-vinylacetamide) (PNVA) solution was found to exhibit the cloud point in the presence of salt. This cloud point was shown to correspond to a liquid-liquid phase separation, as confirmed when the PNVA-salt solutions were maintained at a temperature above the cloud point. The upper layer had a higher polymer concentration and a lower salt concentration than those in the lower layer. Thus interaction between PNVA and salts are repulsive. The lower critical solution temperatures were estimated to be 18±1°C for 1.25 molal (NH₄)₂SO₄ and 25±1°C for 0.76 molal Na₂SO₄. Divalent anions such as SO _2– ⁴ , SO _2– ³ , HPO _2– ⁴ and CO _2– ³ were effective in causing turbidity when examined at 25°C. Dependence of the effect on the cationic species was similar to but significantly different from that for acetyltetraglycine ethylester. The cloud points of PNVA decreased linearly with the increase of the polymer concentration at a fixed salt concentration or with the increase of the salt concentration at a fixed polymer concentration. A parameter analogous to the salting-out constant was empirically derived from the dependencies of the cloud points on the concentrations of polymer and salt.     

Synthesis, characterization, and thermal properties of new silarylene-siloxane-acetylene polymers

New silarylene-siloxane-acetylene polymers have been synthesized by coupling reactions employing 1,3-bis(p-ethynylphenyl)-1,1,3,3-tetraphenyldisiloxane (3) as the key monomer. Their thermal properties have been evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). All of the new polymers showed good thermal stability, with their temperatures at 5% weight loss (T_d5) being higher than 540 °C under nitrogen and higher than 460 °C in air. Their char yields at 1000 °C under N₂ were above 80%. Broad exothermic peaks, attributable to reaction of the acetylenic units, were observed by DSC analysis in the temperature range 270-450 °C.     

Synthesis and properties of polymers containing aromatic amino groups in the main chain and their glass-forming model compounds

Polymers containing di(carbazol-3-yl)phenylamine and N,N^′-di(carbazol-3-yl)-N,N^′-diphenyl-1,4-phenylenediamine units in the main chain have been synthesized by a modified Ullmann condensation as a key step. The number-average molecular weights of the polymers synthesized were in the range of 2300-4800 with a molecular weight distribution of 1.42-2.25. Well defined model compounds of the title polymers were synthesized by stepwise reactions. All the materials exhibit high thermal stability with the initial weight loss temperatures exceeding 320 °C and form glasses. Their glass transition temperatures range from 102 to 216 °C as characterised by differential scanning calorimetry. The electron photoemission spectra of thin films of the synthesized compounds have been recorded and the ionisation potentials of 5.0-5.1 eV have been established.     

Experimental studies on the ring opening polymerization of p-dioxanone using an Al(OPr)3-monosaccharide initiator system

The ring opening polymerization (ROP) of p-dioxanone using a protected monosaccharide (1,2;3,4-di-O-isopropylidene-α-d-galactopyranose)/Al(OⁱPr)₃ initiator system to yield polydioxanone with a protected monosaccharide end-group is described. The products were synthesized at 60-100 °C and characterized by ¹H and ¹³C NMR, and MALDI-TOF mass spectrometry. Besides the desired polydioxanone functionalised with a monosaccharide end-group, also polydioxanone with an OⁱPr end-group was formed (20-30%). Systematic studies showed that the polymer yield is a function of the reaction temperature and the reaction time, with higher temperatures (100 °C) leading to lower yields. The average chain length of the polymers is between 7 and 58 repeating units and may be tuned by the monomer to monosaccharide ratio (at constant Al(OⁱPr)₃ intake). A statistical model has been developed that successfully describes the experimentally observed relation between the average chain length of the functionalized polymer and reaction parameters.     

Controlled radical polymerization of methacrylates of various structures in the presence of the AIBN-FeCl3-N,N-dimethylformamide catalytic system

The controlled radical polymerization of methyl methacrylate, 2-ethoxyethyl methacrylate, and tert-butyl methacrylate conducted via atom-transfer radical polymerization in the presence of the AIBN-FeCl₃· 6H₂O-N,N-dimethylformamide catalytic system is studied. For all the systems under study, the rate of reaction is first order with respect to the monomer concentration. The number-average molecular mass of the polymers linearly increases with conversion, and their polydispersity indexes are below 1.6. The rate of polymerization decreases in the following sequence: 2-ethoxyethyl methacrylate > methyl methacrylate > tert-butyl methacrylate. The presence of ω-terminal chlorine atoms in polymer macromolecules is confirmed by ¹H NMR spectroscopy and through the block copolymerization of methyl methacrylate with a poly(ethoxyethyl methacrylate)-based macroinitiator.     

Synthesis, characterization and photocrosslinking properties of polyacrylamides having bromo substituted pendant cinnamoyl moieties

New 3- and 4-bromocinnamoyl aniline were synthesized condensing 4-aminoacetophenone and the respective bromobenzaldehydes in the presence of sodium hydroxide. The monomers, 4-(3′-bromocinnamoyl) phenyl acrylamide (4,3′-BCPA) and 4-(4′-bromocinnamoyl) phenyl acrylamide (4,4′-BCPA) were prepared by reacting the respective chalcones and acryloyl chloride in the presence of triethylamine at 0-5 °C. Homopolymers of 4,3′-BCPA and 4,4′-BCPA was carried out in methyl ethyl ketone using benzoyl peroxide (BPO) under nitrogen atmosphere at 70 °C. The prepared polymers were characterized by UV, IR, ¹H-NMR and ¹³C-NMR techniques. The molecular weights (M_w and M_n) of the polymers were determined by gel permeation chromatography. The thermogravimetric analysis (TGA) of the polymers in nitrogen atmosphere reveals that they possess very good thermal stability required of a negative type photoresist. The glass transition temperature of poly(4,3′-BCPA) and poly (4,4′-BCPA) were found to be 55 and 64 °C respectively. The solubility of the polymers was tested in various polar and non-polar solvents. Photocrosslinking nature of the polymer samples was carried out in the presence and absence of various triplet photosensitizers in solution phase using chloroform solvent under medium frequency UV light. For using the polymers as negative photoresist materials the rate of photocrosslinking of the polymers was measured under the influence of different solvents, concentrations and position of the substituent.     

Novel aromatic polyimides derived from benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA)

Benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA) is introduced as a monomer for the synthesis of a series of novel polyimides with enhanced high thermal stability. Polyimides derived from BBTDA and aromatic diamines showed high glass transition (T_g>296 °C) and degradation (T₅>455 °C) temperatures, and were soluble in organic solvents (i.e. N-methyl pyrrolidone (NMP), N,N^′-dimethylformamide (DMF), N,N^′-dimethylacetamide (DMAc)). The polymerization yielded high-molecular-weight polyimides with inherent viscosities ranging from 1.75 to 2.14 dl/g. The polymers were characterized by IR and elemental analysis.     

Properties of a nanocomposite polymer electrolyte from an amorphous comb-branch polymer and nanoparticles

Three fully amorphous comb-branch polymers based on poly(styrene-co-maleic anhydride) as a backbone and poly(ethylene glycol) methyl ether of different molecular weights as side chains were synthesized. SiO₂ nanoparticles of various contents and the salt LiCF₃SO₃ were added to these comb-branch polymers to obtain nanocomposite polymer electrolytes. The thermal and transport properties of the samples have been characterized. The maximum conductivity of 2.8×10^–4 S cm^–1 is obtained at 28 °C. In the system the longer side chain of the comb-branch polymer electrolyte increases in ionic conductivity after the addition of nanoparticles. To account for the role of the ceramic fillers in the nanocomposite polymer electrolyte, a model based on a fully amorphous comb-branch polymer matrix in enhancing transport properties of Li⁺ ions is proposed.     

Synthesis and characterization of new telechelic poly(phenyleneoxide)s

New well-defined telechelic poly(phenyleneoxide)s (PPO's) were synthesized from 4-bromo-2,6-dimethylphenol and bi-phenolic compounds through phase transfer catalyzed aromatic nucleophilic substitution polymerization. Bisphenol-A (BPA), 4,4^′-biphenol (BP), hydroquinone (HQ) and 2,6-dihydroxynaphthalene (DHN) were employed as telechelic units. The composition analysis by proton-nuclear magnetic resonance (¹H-NMR) spectroscopy revealed that DHN was highly reactive compared to BPA and HQ, whereas BP was un-reactive in the polymerization process. The number average repeating unit (n) in telechelic PPO was estimated as n=17-19 and n=17-20 for DHN and BPA (or HQ), respectively. The reactivity of the bi-phenolic in PPO synthesis are confirmed as DHN > HQ ∼ BPA ? BP. The molecular weight determination by gel permeation chromatography (GPC) and viscosity method suggest that the molecular weight of PPO decreased drastically with increasing amount of bi-phenolic units in the feed. The GPC chromatogram of PPO showed a bi-modal distribution, clearly indicative of formation of two different types of molecular weight chains, whereas the telechelic polymers have a mono-modal distribution with a narrow polydispersity. Thermal analysis by differential scanning calorimetry revealed that telechelic polymers are highly amorphous, like PPO, and no crystallization or melting peaks were observed in the heating/cooling cycles.