Rational Design of Ambipolar Organic Semiconductors: Is Core Planarity Central to Ambipolarity in Thiophene–Naphthalene Semiconductors?

Herein, we report a new family of naphthaleneamidinemonoimide-fused oligothiophene semiconductors designed for facile charge transport in organic field-effect transistors (OFETs). These molecules have planar skeletons that induce high degrees of crystallinity and hence good charge-transport properties. By modulating the length of the oligothiophene fragment, the majority carrier charge transport can be switched from n-type to ambipolar behavior. The highest FET performance is achieved for solution-processed films of 10-[(2,2'-bithiophen)-5-yl]-2-octylbenzo[lmn]thieno[3',4':4,5]imidazo[2,1-b][3,8]phenanthroline-1,3,6(2H)-trione (NDI-3 Tp), with optimized film mobilities of 2×10(-2) and 0.7×10(-2) cm(2) V(-1) s(-1) for electrons and holes, respectively. Finally, these planar semiconductors are compared with their twisted-skeleton counterparts, which exhibit only n-type mobility, in order to understand the origin of the ambipolarity in this new series of molecular semiconductors.     

Progress of pyrene-based organic semiconductor in organic field effect transistors

Thanks to the pure blue emitting, high planarity, electron rich and ease of chemical modification, pyrene has been thoroughly investigated for applications in organic electronics such as organic light emitting diodes (OLEDs), organic field effect transistors (OFETs), and organic solar cells (OSCs). Especially, great progresses have been made of pyrene-based organic semiconductors for OFETs in past decades. Due to the difference of molecular structure, pyrene-based organic semiconductors are divided into three categories, pyrene as terminal group, pyrene as center core and fused pyrene derivatives. This minireview gives a brief introduction of the structure-property relationship and application in OFETs about most of pyrene-based semiconducting materials since 2006, illustrating that pyrene is a good building block to construct semiconductors with superior transport property for OFETs. Finally, we provide a summary concerning the methodology to improve the transport property of the pyrene-based semiconducting materials as well as an outlook.     

Rational design of diarylethylene-based polymeric semiconductors for high-performance organic field-effect transistors

Constructing planar, rigid, and high electronically delocalized π-conjugated molecular system is the most basic requirements of obtaining high-performance polymeric semiconductors for organic field-effect transistors (OFETs). In this regard, diarylethylene (DAE)-based polymers show great potential because many substantive progresses related to polymer field-effect transistors had been achieved from the kind of polymer materials in recent years. In the brief review, series of DAE-based polymer are highlighted, based on which several design strategies have been summarized by the way of comparative research method. These strategies have important guiding significance not only for further developing new DAE-based and other polymeric semiconductors for OFETs but also for developing specific polymeric semiconductors for other organic electronics, such as organic photovoltaics and organic light-emitting diodes. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 585–603     

Ladder‐Type Heteroarene‐Based Organic Semiconductors

The fusion of heteroaromatic rings into ladder‐type heteroarenes can stabilize frontier molecular orbitals and lead to improved physicochemical properties that are beneficial for applications in various optoelectronic devices. Thus, ladder‐type heteroarenes, which feature highly planar backbones and well‐delocalized π conjugation, have recently emerged as a promising type of organic semiconductor with excellent device performance in organic photovoltaics (OPVs) and organic field‐effect transistors (OFETs). In this Focus Review, we summarize the recent advances in ladder‐type heteroarene‐based organic semiconductors, such as hole‐ and electron‐transporting molecular semiconductors, and fully ladder‐type conjugated polymers towards their applications in OPVs and OFETs. The recent use of ladder‐type small‐molecule acceptor materials has strikingly boosted the power conversion efficiency of fullerene‐free solar cells, and selected examples of the latest developments in ladder‐type fused‐ring electron acceptor materials are also elaborated.     

Noncovalent conformational locks in organic semiconductors

Highly planar conformation is considered to be one of the most important properties for high performance organic semiconductors. Among all kinds strategies for designing highly performing materials, noncovalent conformational locks(NCLs)have been widely used to increase the planarity and rigidity for π-conjugated systems. This review summarizes π-conjugated small molecules and polymers by employing various NCLs for controlling molecular conformation in the past two years. The optoelectronic properties of the conjugated materials, together with their applications on organic field-effect transistors(OFETs)and organic photovoltaics(OPVs) are discussed. Besides, the outlook and challenges in this field are also presented. It is obvious that NCLs play an important role in the design and synthesis of high-performance organic semiconductors.     

High-performance organic field-effect transistors: molecular design, device fabrication, and physical properties

In the past decade, tremendous progress has been made in organic field-effect transistors (OFETs). Their real applications require further development of device performance. OFETs consist of organic semiconductors, dielectric layers, and electrodes. Organic semiconductors play a key role in determining the device characteristics. The properties of the organic semiconductors, such as molecular structure and packing, as well as molecular energy levels, can be properly controlled by molecular design. Therefore, we designed and synthesized a series of organic molecules. The synthesized organic semiconductors exhibit excellent field-effect properties due to strong intermolecular interactions and proper molecular energy levels. Meanwhile, the influence of the device fabrication process, organic semiconductor/dielectric layer interface, and organic layer/electrode contact on the device performance was investigated. A deep understanding of these factors is helpful to improve field-effect properties. Furthermore, single-crystal field-effect transistors are highlighted because the single-crystal-based FETs can provide an accurate conducting mechanism of organic semiconductors and higher device performance as compared with thin film FETs.     

Progresses in organic field-effect transistors and molecular electronics

In the past years, organic semiconductors have been extensively investigated as electronic materials for organic field-effect transistors (OFETs). In this review, we briefly summarize the current status of organic field-effect transistors including materials design, device physics, molecular electronics and the applications of carbon nanotubes in molecular electronics. Future prospects and investigations required to improve the OFET performance are also involved. __________ Translated from Huaxue Tongbao (Chemistry), 2006, 69(6) (in Chinese)     

Halogenated 6,13-bis(triisopropylsilylethynyl)-5,7,12,14-tetraazapentacene: applications for ambipolar air-stable organic field-effect transistors

Density functional theory calculations were performed to explore the influence of halogenation on the reorganization energies (λ), adiabatic ionization potentials (IPs), adiabatic electron affinities (EAs), and air stabilities of a series of pentacene (PENT) and tetraceno[2,3-b]thiophene (TbTH) derivatives. According to calculated IP and EA values, all well-known PENT and TbTH derivatives in this paper are air-stable p-channel but not air-stable n-channel organic field-effect transistors (OFETs) due to insufficient EAs, consistent with experimental observations. The calculated results show that attaching two or more halogen atoms onto air-unstable 6,13-bis(triisopropylsilylethynyl)-5,7,12,14-tetraazapentacene (TIPS-N4PENT) is sufficient for promoting ambipolar air-stable properties. The electronic coupling and band structure calculations indicate that halogenated TIPS-N4PENT derivatives have potential applications in high-performance ambipolar air-stable OFETs. They also provide rational guidelines for the design of ambipolar air-stable organic semiconductors (OSCs).     

1,3,6,8-Tetraazapyrenes: synthesis, solid-state structures, and properties as redox-active materials

A series of new tetraazapyrene (TAPy) derivatives has been synthesized by reducing 1,4,5,8-tetranitronaphthalene to its corresponding tin salt (I) and reacting it with perfluorinated alkyl or aryl anhydrides. The resulting 2,7-disubstituted TAPy molecules and the known parent compound 1,3,6,8-tetraazapyrene (II) have been further derivatized by core chlorination and bromination. The brominated compounds served as starting materials for Suzuki cross-coupling reactions with electron-poor arylboronic acids. Single-crystal X-ray analyses established polymorphism for some TAPy compounds. The ground-state geometries of all new TAPy derivatives were modeled with DFT methods [B3PW91/6-31 g(d,p) and B3PW91/6-311+g(d,p)], especially focusing on the energies of the lowest unoccupied molecular orbital (LUMO) and the electron affinities (EA) of the molecules. The results of the calculations were confirmed experimentally by cyclic voltammetry to evaluate the substitution effects at the 2 and 7 position and the core positions, respectively, and gave LUMO energy levels that range from -3.57 to -4.14 eV. Fabrication of organic field-effect transistors (OFETs) with several of these tetraazapyrenes established their potential as organic n-type semiconductors.     

Air-stable n-type semiconductor: core-perfluoroalkylated perylene bisimides

A series of core-perfluoroalkylated perylene bisimides (PBIs) have been efficiently synthesized by copper-mediated perfluoroalkylation of dibrominated PBIs. Their aromatic cores are highly twisted due to the steric encumbrance in the bay regions as revealed by single-crystal X-ray analysis. The organic field-effect transistors (OFETs) incorporating these new n-type semiconductors show remarkable air-stability and good field effect mobility.     

Electron-transporting oligothiophenes containing dicyanomethylene-substituted cyclopenta[b]thiophene: chemical tuning for air stability in OFETs

We have synthesized new electron-transporting oligothiophenes containing dicyanomethylene-substituted cyclopenta[b]thiophene as an active material for the fabrication of solution-processable n-type organic field-effect transistors (OFETs). The influence of the number of dicyanomethylene groups as well as the position of hexyl groups was investigated in detail by performing photophysical and electrochemical measurements. Results revealed that the optical energy gaps and the lowest unoccupied molecular orbital (LUMO) energy levels can be controlled by changing the number of dicyanomethylene groups. In contrast, the position of hexyl groups has little influence on molecular electronic properties. X-ray diffraction and atomic force microscopy measurements revealed that spin-coated thin films of the new compounds had a crystalline structure. OFETs based on these compounds were evaluated in vacuum and air-exposed conditions, and the electron mobility of up to 0.016 cm(2) V(-1) s(-1) was achieved. Furthermore, we demonstrated that the air stability of the OFETs depends on the LUMO energy level of the compounds.     

Electron transporting semiconducting polymers in organic electronics

Significant progress has been achieved in the preparation of semiconducting polymers over the past two decades, and successful commercial devices based on them are slowly beginning to enter the market. However, most of the conjugated polymers are hole transporting, or p-type, semiconductors that have seen a dramatic rise in performance over the last decade. Much less attention has been devoted to electron transporting, or n-type, materials that have lagged behind their p-type counterparts. Organic electron transporting materials are essential for the fabrication of organic p-n junctions, organic photovoltaic cells (OPVs), n-channel organic field-effect transistors (OFETs), organic light-emitting diodes (OLEDs) and complementary logic circuits. In this critical review we focus upon recent developments in several classes of electron transporting semiconducting polymers used in OLEDs, OFETs and OPVs, and survey and analyze what is currently known concerning electron transporting semiconductor architecture, electronic structure, and device performance relationships (87 references).     

Synthesis and characterization of benzo[1,2-b:3,4-b':5,6-b']trithiophene (BTT) oligomers

Two dimers (2 and 3), dendritic tetramer (4), hexamer (5), and decamer (6) of benzo[1,2-b:3,4-b':5,6-b']trithiophene (BTT), a potential π-core unit with C(3h) symmetry, were synthesized, characterized, and evaluated for possible use as organic semiconductors. Single crystal X-ray analyses of the dimers (2 and 3) revealed that they have planar molecular structures with dihedral angles of almost 180° between two BTT units. In accordance with the rigid and planar molecular structure, the unsubstituted dimer (2) is poorly soluble, whereas the octyl-substituted dimer (3) has improved solubility. Although the solubility of the dendritic tetramer (4) is decreased, further extended systems, i.e., the dendritic hexamer (5) and decamer (6), have solubilities better than that of 4. With increasing numbers of BTT units in the molecule, the experimentally determined energy levels of HOMO shift upward slightly and the HOMO-LUMO energy gaps become smaller, but the extent of HOMO destabilization and reduction of the HOMO-LUMO gap are not significant. Taking into account the energy levels of the frontier orbitals, 3-6 could be useful as p-channel organic semiconductors rather than n-channel. In fact, the spin-coated thin film of 3 with edge-on molecular orientation acted as an active channel of field-effect transistors that showed hole mobilities as high as 0.14 cm(2) V(-1) s(-1), indicating that the BTT core is a useful π-conjugated system for application to organic semiconductors, although 4-6 gave FET characteristics rather inferior to those of 3, owing to their amorphous nature in the thin film state.     

Isomerization of trans-[Ru(PTA)4Cl2] to cis-[Ru(PTA)4Cl2] in water and organic solvent: revisiting the chemistry of [Ru(PTA)4Cl2

trans-[Ru(PTA)4Cl2] (trans-1), (PTA = 1,3,5-triaza-7-phosphatricyclo[3.3.1.13,7]decane) has been isolated and structurally characterized by X-ray crystallography. The structure reveals ruthenium in a slightly distorted-octahedral environment bound to two axial chlorides and four equatorial PTA ligands. In organic solvents, trans-1 undergoes a relatively clean isomerization to cis-1. In aqueous environments, trans-1 undergoes a more complicated transformation involving isomerization, protonation, and ligand substitution affording cis-1 and a series of structurally related molecules. From these results, we conclude that the synthesis of [Ru(PTA)4Cl2] (1) affords trans-1, not cis-1, as earlier reports suggest. The water-soluble hydride cis-[Ru(PTA)4H2] (2) has also been synthesized from the reaction of trans-[Ru(PTA)4Cl2] with excess sodium formate. Compound 2 is stable in deoxygenated water and undergoes H/D exchange with D2O (t1/2 approximately equal to 120 min, at 25 degrees C). The solid-state structures of both trans-1 and 2 are described.     

高性能双极性聚合物半导体材料与晶体管器件

有机聚合物半导体材料与晶体管器件是融合了化学、材料、半导体以及微电子等学科的前沿交叉研究方向.聚合物半导体材料分子是该领域研究的重要内容,其中双极性聚合物分子半导体材料,兼具了电子和空穴的双重载流子输运能力而受到学术界的广泛关注.本文总结了双极性聚合物半导体材料与器件的研究进展,重点介绍了我们在D-A型双极性聚合物分子半导体材料设计、加工技术与器件制备以及功能应用方面的研究工作,并论述了双极性聚合物分子半导体材料与器件研究过程中存在的科学问题及发展方向.     

Air-stable n-type organic field-effect transistors based on solution-processable, electronegative oligomers containing dicyanomethylene-substituted cyclopenta[b]thiophene

Solution-processable, electronegative, π-conjugated systems containing dicyanomethylene-substituted cyclopenta[b]thiophene were synthesized as potential active materials for air-stable n-type organic field-effect transistors (OFETs). Electrochemical measurements revealed that these compounds exhibited electrochemical stability and that the lowest unoccupied molecular orbital (LUMO) had an energy level less than -4.0 eV. Flash-photolysis time-resolved microwave conductivity (FP-TRMC) measurements were performed, and the value of intradomain electron mobility was determined to be as high as 0.1 cm(2) V(-1) s(-1) . The OFETs were fabricated by spin-coating thin films of the compounds as an active layer. The electron mobility of the OFETs was 3.5×10(-3) cm(2) V(-1) s(-1) in vacuum. Furthermore, electron mobility of the same order of magnitude and stable characteristics were obtained under air-exposed conditions. X-ray diffraction measurements of the spin-coated thin films revealed the difference of molecular arrangements depending on the inner conjugated units. Atomic force microscopy measurements of crystalline-structured films exhibited the formation of grains. The accomplishment of air-stability was attributed to the combined effect of the low-lying LUMO energy level and the molecular arrangements in the solid state, avoiding both the quenching of electron carriers and the intrusion of oxygen and/or moisture.     

Synthesis, characterization, and DNA binding of new water-soluble cyclopentadienyl ruthenium(II) complexes incorporating phosphines

The new water-soluble ruthenium(II) chiral complexes [RuCpX(L)(L')](n+) (X = Cl, I. L = PPh3; L' = PTA, mPTA; L = L' = PTA, mPTA) (PTA = 1,3,5-triaza-7-phosphaadamantane; mPTA = N-methyl-1,3,5-triaza-7-phosphaadamantane) have been synthesized and characterized by NMR and IR spectroscopy and elemental analysis. The salt mPTA(OSO2CF3) was also prepared and fully characterized by spectroscopic techniques. X-ray crystal structures of [RuClCp(PPh3)(PTA)] (2), [RuCpI(PPh3)(PTA)] (3), and [RuCpI(mPTA)(PPh3)](OSO2CF3) (9) have been determined. The binding properties toward DNA of the new hydrosoluble complexes have been studied using the mobility shift assay. The ruthenium chloride complexes interact with DNA depending on the hydrosoluble phosphine bonded to the metal, while the corresponding compounds with iodide, [RuCpI(PTA)2] (1), [RuCpI(PPh3)(PTA)] (3), [RuCpI(mPTA)2](OSO2CF3)2 (6), and [RuCpI(mPTA)(PPh3)](OSO2CF3) (9), do not bind to DNA.     

Structure-property relationships of benzo[2,1-b:3,4-b’]bis[1]benzothiophenes for organic field effect transistors

A series of novel benzo[2,1-b:3,4-b’]bis[1]-benzothiophene (BBBT) derivatives with different side-chains were synthesized and characterized. And their mobility properties were evaluated based on their active layers in OFETs devices. By means of simple thermal annealing, the devices based on BBBT-4 and BBBT-6 exhibited typical p-type FETs behavior with average hole mobilities of 0.28 and 0.124?cm² V^?1?s^?1, respectively. Furthermore, the structure-property relationships of these semiconductors were also investigated by XRD and AFM.     

Phosphinic platinum complexes with 8-thiotheophylline derivatives: synthesis, characterization, and antiproliferative activity

The platinum mixed-phosphine complexes (SP-4,2)-[PtCl(8-MTT)(PPh3)(PTA)] (2) and cis-[Pt(8-MTT)2(PPh3)(PTA)] (3) (MTTH2 = 8-(methylthio)theophylline, PTA = 1,3,5-triaza-7-phosphaadamantane) have been prepared from the precursor cis-[PtCl2(PPh3)(PTA)] (1), which has been fully characterized by X-ray diffraction determination. Antiproliferative activity tests indicated that the presence of one lipophilic PPh3 and one hydrophilic PTA makes 1-3 more active than the analogues bearing two PPh3 or two PTA. The reactivity of cis-[PtCl2(PPh3)2], cis-[PtCl2(PTA)2], and cis-[PtCl2(PPh3)(PTA)] with the bis(thiopurines) bis(S-8-thiotheophylline)methane (MBTTH2), 1,2-bis(S-8-thiotheophylline)ethane (EBTTH2), and 1,3-bis(S-8-thiotheophylline)propane (PBTTH2) has also been investigated. New binuclear complexes have been prepared and identified by spectroscopic techniques and their antiproliferative activities on T2 and SKOV3 cell lines evaluated.