Surface tension isotherms of the dioxane–acetone–water and glycerol–ethanol–water ternary systems

The results of the experimental and theoretical studies of the concentration dependence of surface tension of aqueous solutions of the 1,4-dioxane–acetone–water and glycerol–ethanol–water ternary systems were given. The studies were performed by the hanging-drop method on a DSA100 tensiometer. The maximum error of surface tension was 1%. The theoretical models for calculating the surface tension of the ternary systems of organic solutions were analyzed.     

Experimental and theoretical investigation of the kinetics of the reaction of atomic chlorine with 1,4-dioxane

The rate coefficients for the reaction of 1,4-dioxane with atomic chlorine were measured from T = 292-360 K using the relative rate method. The reference reactant was isobutane and the experiments were made in argon with atomic chlorine produced by photolysis of small concentrations of Cl2. The rate coefficients were put on an absolute basis by using the published temperature dependence of the absolute rate coefficients for the reference reaction. The rate coefficients for the reaction of Cl with 1,4-dioxane were found to be independent of total pressure from p = 290 to 782 Torr. The experimentally measured rate coefficients showed a weak temperature dependence, given by k(exp)(T) = (8.4(-2.3)(+3.1)) × 10(-10) exp(-(470 ± 110)/(T/K)) cm3 molecule (-1) s(-1). The experimental results are rationalized in terms of statistical rate theory on the basis of molecular data obtained from quantum-chemical calculations. Molecular geometries and frequencies were obtained from MP2/aug-cc-pVDZ calculations, while single-point energies of the stationary points were computed at CCSD(T) level of theory. The calculations indicate that the reaction proceeds by an overall exothermic addition-elimination mechanism via two intermediates, where the rate-determining step is the initial barrier-less association reaction between the chlorine atom and the chair conformer of 1,4-dioxane. This is in contrast to the Br plus 1,4-dioxane reaction studied earlier, where the rate-determining step is a chair-to-boat conformational change of the bromine-dioxane adduct, which is necessary for this reaction to proceed. The remarkable difference in the kinetic behavior of the reactions of 1,4-dioxane with these two halogen atoms can be consistently explained by this change in the reaction mechanism.     

Experimental determination and modeling of structure II hydrates in mixtures of methane+water+1,4-dioxane

Hydrate phase equilibrium conditions were measured with a Cailletet apparatus in the pressure range 2<14 MPa. The investigated 1,4-dioxane concentrations were 1, 2, 5, 7, 10, 20 and 30 mol% relative to water. The results show that adding 1,4-dioxane up to concentrations of 6 mol%, about the stoichiometric ratio of large sII cages to water (1/17), reduced the equilibrium pressure of hydrate formation. Adding 1,4-dioxane beyond 6 mol% caused a slow increase of the equilibrium pressures. The hydrate phase equilibria data were modeled as equilibrium between a liquid phase of water and 1,4-dioxane, with a small amount of methane, and a sII hydrate of 1,4-dioxane and methane. The chemical potential of the hydrate phase was described using the van der Waals and Platteeuw theory. Activity coefficients of the liquid phase were calculated by a van Laar relation, based on literature 1,4-dioxane+water VLE data. The predicted equilibrium pressures calculated were within 5% of the data up to a concentration of 20 mol% 1,4-dioxane relative to water.     

(15N) acetamide in polar solvents: Hindered internal rotation and intermolecular interactions

The ¹H spectrum of (¹⁵N)acetamide has been measured in dimethyl sulphoxide (DMSO), methyl propyl ketone (MPK), 1,3-dioxane, 1,4-dioxane, D₂O, acetonitrile and pyridine-d₅ at various temperature intervals within the range of 278–343 K. From the temperature dependence of the NMR spectra of the amide protons, the free energy of activation, ΔG^≠, for hindered rotation about the central C? N bond was determined by means of total line shape analysis in the four solvents DMSO, MPK and the two dioxanes. Observed values of ΔG^≠ (298 K) (72.7 in DMSO, 70.1 in MPK, 70.0 in 1,3-dioxane and 70.1 kJ mol¹ in 1,4-dioxane) were not very sensitive to the choice of solvent or concentration. The concentration dependence of the internal chemical shift between the amide protons was studied in MPK, D₂O, acetonitrile and pyridine-d₅. The free energy of activation and the internal chemical shift are discussed on the basis of solvent-amide and amide–amide specific hydrogen bonding interactions, and in comparison to the results of molecular orbital calculations.     

Excess enthalpies of water+1,4-dioxane at 278.15, 298.15, 318.15 and 338.15 K

The excess molar enthalpies of (1–x)water+x1,4-dioxane have been measured at four different temperatures. All the mixtures showed negative enthalpies in the range of low mole fraction but positive ones in the range of high mole fraction of 1,4-dioxane. Excess enthalpies were increased with increasing temperature except those of at 278.15 K. Partial molar enthalpies have maximum around x=0.13 and minimum around x=0.75. Three different behaviors for the concentration dependence of partial molar enthalpies were observed for all temperature. Theoretical calculations of molecular interactions of three characteristic concentrations were carried out using the molecular orbital method.     

Solvent polarity effects on carbene/ether-O-ylide equilibria

p-Nitrophenylchlorocarbene (PNPCC) reacted reversibly with tetrahydrofuran (THF), tetrahydropyran (THP), 1,3-dioxane (1,3-D), and 1,4-dioxane (1,4-D) to form O-ylides 8, 9, 10, and 11, respectively. The O-ylides were visualized by their characteristic UV-vis spectroscopic signatures. Equilibrium constants (K) were determined spectroscopically, and studies of K as a function of pentane/1,2-dichloroethane (DCE) solvent blends illustrated the dependence of K on solvent polarity. Electronic structure calculations based on density functional theory provided carbene/ether O-ylide structures and energetics, as well as electronic spectroscopic parameters for use in the determination of K. Comparisons of the computed and experimental data were generally satisfactory.     

Headspace gas chromatographic determination of 1,4-dioxane with adsorption preconcentration on silica modified with λ-carrageenan

Organosilica materials containing λ-carrageenan on their surface are synthesized. The conditions for the immobilization of the polysaccharide, such as phase contact time and pH and concentration of solutions, are optimized. It is shown that the chemisorption of the polysaccharide passes through ion exchange multipoint immobilization, which provides a high hydrolytic stability of the prepared organosilica. The rate of washing of λ-carrageenan to the solution does not exceed 0.5%. The physical and chemical characteristics of the new material are studied. In particular, it is shown that the material is completely stable up to 200°C and reversibly desorbs water at 120°C; it well adsorbs 1,4-dioxane from the gas phase and desorbs it under heating to 70°C. This ensures the use of the prepared carrageenan-containing material as an adsorbent for a solid-phase cartridge designed for the adsorption preconcentration of 1,4-dioxane in its headspace gas chromatographic determination in samples of nonionic surfactants. The developed procedure ensures the determination of 1,4-dioxane by gas chromatography with a flame ionization detector in the concentration range 0.012–3.750 mg/L with a limit of detection of 0.0014 mg/L. Preconcentration lowers the limit of detection in the determination of 1,4-dioxane by 50 times.     

Molecular Interactions in 1,4-Dioxane,Tetrahydrofuran, and Ethyl Acetate Solutions of 1,1′-Bis(4-isopropyloxyacetylphenoxy)cyclohexane on Reological,Density, and Acoustic Behavior

Various thermo-acoustical parameters of 1,4-dioxane, tetrahydofuran and ethylacetae solutions of 1,1′-bis(4-isopropyloxyacetylphenoxy)cyclohexane were determined at different temperatures using density, viscosity and ultrasonic speed and correlated with concentration. Linear increase of ultrasonic speed, specific acoustical impedance, Rao’s molar sound function, Van der Waals constant and free volume with concentration C and decreased with temperature. Linear decrease of adiabatic compressibility, internal pressure, intermolecular free path length, classical absorption coefficient, and viscous relaxation time with concentration and increased with temperature indicated existence of strong molecular interactions in solutions and further supported by positive values of solvation number. Gibbs free energy of activation decreased with C in all three systems. It is decreased with T in 1,4-dioxane, while increased in tetrahydrofuran and ethyl acetate. Both enthalpy of activation and entropy of activation are increased gradually with C in 1,4-dioxane, while they are negative and remained practically independent of concentration in 1,4-dioxane and tetrahydofuran systems.     

Morphology phase diagram of ultrathin anatase TiO2 films templated by a single PS-b-PEO block copolymer

Ultrathin TiO2 films showing rich morphologies are prepared on Si(100) substrates using sol-gel chemistry coupled with an amphilic polystyrene-block-poly(ethylene oxide) (PS-b-PEO) diblock copolymer as a structure-directing agent. The block copolymer undergoes a good-poor solvent pair induced phase separation in a mixed solution of 1,4-dioxane, concentrated hydrochloric acid (HCl), and titanium tetraisopropoxide (TTIP). By adjusting the weight fractions of 1,4-dioxane, HCl, and TTIP, inorganic block copolymer composite films containing a variety of different morphologies are obtained. On the basis of the results a ternary phase diagram of the morphologies is mapped. By calcination, anatase TiO2 films are achieved. The morphologies and crystallographic phase of the films are studied with AFM, SEM, and XRD, respectively, and the formation mechanisms of the different morphologies are discussed.     

Characterization of two linear chain compounds: Ferromagnet NiCl2(CH3OH)2(1,4-dioxane)0.5 (1) and paramagnet [NiCl2(H2O)2(1,4-dioxane)](1,4-dioxane) (2)

The solvent-mediated crystal-to-crystal transformation was observed from yellow crystal of NiCl₂(CH₃OH)₂(1,4-dioxane)_0.5 (1) to green crystal of [NiCl₂(H₂O)₂(1,4-dioxane)](1,4-dioxane) (2) under high humidity or adding of H₂O in CH₃OH/1,4-dioxane solution. The μ-Cl₂ bridge in 1 replaced by 1,4-dioxane bridge in 2. In 1, the chlorine-bridged linear chains of NiCl₂(CH₃OH)₂ and 1,4-dioxane molecules stack along the b- and c-axis alternatively with hydrogen bonds intrachain, interchain, between chain and solvent. These hydrogen bonds and dipolar interaction between ferromagnetic coupling chlorine-bridged chains result in long-range ferromagnetic ordering at 3.1 K and a strong frequency dependence of the ac-susceptibilities associated to domain structures with very large shape anisotropy was observed below 3.1 K. In 2, layers of 1,4-dioxane-bridged linear chains of NiCl₂(H₂O)₂(1,4-dioxane) are intercalated by layer of 1,4-dioxane molecules with hydrogen bonds between chain and solvent. Compound 2 is paramagnet to 2 K.     

Stability of immobilized soybean lipoxygenase in selected organic solvent media

The immobilization and biocatalysis of commercially purified soybean lipoxygenase (LOX) type I-B (EC 1.13.11.12) were investigated in organic solvent media. The results showed that the highest immobilization efficiencies of LOX, 30.6 and 29.3%, were obtained with DEAE-cellulose and modified Eupergit C250L supports, respectively. The biocatalysis of free and immobilized (Eupergit C250L/EDA) LOXs was investigated in different mixtures of hexane and a selected cosolvent (95:5 [v/v]). The results showed a 1.5 and a 1.6 increase in the activity of free and immobilized LOXs, respectively, using a mixture of hexane and 1,4-dioxane compared with that in hexane alone; however, cosolvents, including 2-octanone, 2-heptanone, 2-butanone, and cyclohexanone, displayed an inhibitory effect on LOX activity. In the mixture of 1,4-dioxane and hexane, LOX activity was dependent on the cosolvent concentration, which was increased with 1,4-dioxane up to 5% (v/v). The threshold 1,4-dioxane concentration (C50) and the incubation period (T50) at which 50% of the maximal enzyme activity was obtained for the free and immobilized LOXs were 6.7 and 8.9% (v/v) and 9.1 and 17.0 min, respectively.     

Effect of the initiator solvation on the change in polymerization rates of dioxolane and tetrahydrofuran

The cocatalytical effects of water and ethanol on the cationic polymerization of dioxolane and tetrahydrofuran were studied. The ion pair or were used for initiating the polymerization. The dependence of the polymerization rate on the concentration of cocatalyst was examined with various temperatures, concentrations of monomer, solvents (heptane, tetrachloroethane, tetrachloroethane-heptane mixtures, and 1,4-dioxane), and concentrations of initiator. The abscissa of the maximum of the reaction rate in the dependence mentioned above was the criterion for evaluation of the effect of the reaction variables. The changes observed are small; nevertheless, they prove the share of all components of the polymerizing system in establishing solvation equilibria, which determine the number and the reactivity of active centers and, in fact, the reaction rate.     

Determination of 1,4-dioxane in household detergents and cleaners

A possible human carcinogen, 1,4-dioxane, was investigated as to its concentration levels in household detergents and cleaners currently sold in Japan. A solid-phase extraction combined with stable isotope dilution and gas chromatographic/mass spectrometric determination was evaluated for the determination of 1,4-dioxane in household products. The evaluation of the method was performed using a recovery study of 1,4-dioxane-d8 from detergent and cleaner samples. The mean overall recovery and relative standard deviation were 78 and 15%, respectively. The limit of quantitation was 0.05 mg/kg. This method was satisfactorily applied to the determination of 1,4-dioxane in household products. 1,4-Dioxane was detected in 40 out of the 51 investigated samples. The concentrations ranged from 0.05 to 33 mg/kg, and the mean was 2.7 mg/kg. The mean of the products that included anionic surfactants, i.e., alkylpoly(oxyethylene)sulfates, was 7.2 mg/kg, which was higher than the 0.39 mg/kg mean for the other surfactants. Moreover, the 1,4-dioxane load/person was estimated to be 0.061 mg/day/person in Japan, which was 27% of the load from the domestic effluent.     

“LIVING-LIKE” CATIONIC POLYMERIZATION OF ISOBUTYL VINYL ETHER INITIATED BY CARBOXYL GROUPS ON CARBON BLACK SURFACE/ETHYLALUMINUM DICHLORIDE SYSTEM IN THE PRESENCE OF 1,4-DIOXANE

The effect of 1,4-dioxane as an added base on the cationic polymerization of isobutyl vinyl ether (IBVE) initiated by carboxyl groups on carbon black surface/ethylaluminum dichloride (EtAlCl₂) system was investigated. Although the cationic polymerization of IBVE by carbon black/EtAlCl₂ system the absence of 1,4-dioxane instaneously proceeded and the monomer conversion achieved 100% within a minute. The molecular weight distribution (MWD) of polyIBVE obtained was very broad. On the contrary, the MWD of polyIBVE obtained was very narrow and narrower than that obtained from the carbon black/ZnCl₂ initiating system by the addition of 1,4-dioxane. The number-average molecular weight (Mn) of polyIBVE obtained was directly proportional to monomer conversion in the cationic polymerization. However, the Mn of polyIBVE obtained from the polymerization by the initiating system in the the presence of 1,4-dioxane was smaller than that of the calculated value, assuming that polyl(IBVE) chain forms per unit carboxyl group on carbon black surface. It was concluded that carbon black/EtAlCl₂ initiating systems in the presence of 1,4-dioxane has an ability to initiate “living-like” cationic polymerization of IBVE based on the above results. PolyIBVE was grafted onto a carbon black surface after quenching the above “living-like” cationic polymerization systems with methanol.     

Occurrence of 1,4-dioxane in cosmetic raw materials and finished cosmetic products.

Surveys of cosmetic raw materials and finished products for the presence of the carcinogen 1,4-dioxane have been conducted by the U.S. Food and Drug Administration since 1979. Analytical methods are described for the determination of 1,4-dioxane in ethoxylated cosmetic raw materials and cosmetic finished products. 1,4-Dioxane was isolated by azeotropic atmospheric distillation and determined by gas chromatography using n-butanol as an internal standard. A solid-phase extraction procedure based on a previously published method for the determination of 1,4-dioxane in cosmetic finished products was also used. 1,4-Dioxane was found in ethoxylated raw materials at levels up to 1410 ppm, and at levels up to 279 ppm in cosmetic finished products. Levels of 1,4-dioxane in excess of 85 ppm in children's shampoos indicate that continued monitoring of raw materials and finished products is warranted.     

Molar excess volumes of 1,4-dioxane+ acetonitrile,n-butylamine+acetonitrile andn-butylamine+1,4-dioxane at different temperatures

Molar excess volumes and partial molar volumes are reported for binary mixtures of 1,4-dioxane + acetonitrile, n-butylamine + acetonitrile and n-butylamine + 1,4-dioxane at five different temperatures and over the complete concentration range. The Prigogine-Flory-Patterson model of solution thermodynamics has been used to predict the excess molar volumes. This work shows the importance of the three contributions: interactional, internal pressure and free volume, to the excess volume.     

Preparation and properties of a novel solution of hydrogen bromide (HBr) in 1,4-dioxane: An alternative reagent to HBr gas without protic solvents

A solution of hydrogen bromide (HBr) in 1,4-dioxane was prepared and investigated for its ability to brominate alcohols, and hydrobrominate alkenes. This study revealed that the brominating ability of this HBr/1,4-dioxane solution is equal or superior to that of hydrobromic acid or HBr in acetic acid. The solution of HBr in 1,4-dioxane is robust, exhibiting no decomposition of the solvent, and retaining 97% of its original concentration, when kept at ?25 °C for 30 days. This solution is a liquid alternative to HBr gas without protic solvents.     

Determination of 1,4-Dioxane in Toluene by Gas Chromatography

A gas chromatographic method is presented for determining from 1 to 100 μg/mL of 1,4-dioxane in toluene with purities ranging from commercial to high-purity grades. This method relies on extracting 1,4-dioxane from toluene into water. The water extract is analyzed for 1,4-dioxane content by gas chromatography/flame ionization detection and a capillary column coated with a bonded polyethylene glycol stationary phase. Splitless injection is used to achieve a 1 μg/mL detection limit. Purging extracts with nitrogen after an initial analysis is suggested as an extract clean-up procedure and as a means to confirm the identification of 1,4-dioxane. However, for absolute identification of dioxane, gas chromatography/mass spectroscopy should be considered.     

Headspace gas chromatography analysis of toxic contaminants in ethoxylated alcohols and alkylamines

Summary Headspace-gas chromatography was used to determine the contents of toxic 1,4-dioxane, ethylene oxide and ethylene glycol in ethoxylated alcohols and alkylamines, and in commercial cosmetics and washing products. A Permaphase PEG capillary column was used for the determination of 1,4-dioxane and ethylene oxide and a DB-17 column for ethylene glycol determination. Dimethylformamide was used as the solvent in the determination of 1,4-dioxane and ethylene oxide, and undecanol in the case of ethylene glycol. The detection limits for ethylene oxide, 1,4-dioxane and ethylene glycol are 1,2 and 10 μg·g⁻¹, respectively.     

Transference numbers for KCl in ethanol-water and dioxane-water mixtures at 25°C

Transference numbers were determined by the moving-boundary method for KCl in aqueous mixtures containing 12, 20, 40, 60, and 79 wt. % ethanol, and 22, 44, 62, and 75 wt. % 1,4-dioxane. The boundaries were detected by the potentiometric method using an autogenic cell with a cadmium anode. Little concentration dependence was expected since all the transference numbers were close to 0.5. The Fuoss-Onsager theory for the electrophoretic effects was used for extrapolation to infinite dilution. The precision of the measurements appears to be well within 0.05%.These measurements were performed at Brown University, Providence, Rhode Island, and at Mellon Institute, Carnegie-Mellon University, Pittsburgh, Pennsylvania.