Chemiluminescent determination of vanadium in steel

Summary A chemiluminescent method for the determination of vanadium in steel with cinchomeronic hydrazide as analytical reagent is proposed. The optimum conditions are pH 11.75 (phosphate buffer), 1.0×10^–3 mol/l cinchomeronic hydrazide, 6.6×10^–3 mol/l hydrogen peroxide and 2.8×10^–3 mol/l V(IV). The maximum chemiluminescent emission is obtained at 420 nm. A linear relationship exists in the range of 0.04–1.00 g/ml of V(IV) with a 3.6% variation coefficient at 0.50 g/ml of V(IV) level for ten replicates. Cobalt(II), copper(II) and chromium(VI) show strong interference and a chloroform extraction procedure with -benzo-inoxime is recommended to avoid these interferences. This method has been applied to determine vanadium in a certified steel with excellent results.Presented at Euroanalysis VII     

Simultaneous determination of chromium(VI) and chromium(III) by flame atomic absorption spectrometry with a chelating ion-exchange flow injection system

Summary Simultaneous Determination of Chromium(VI) and Chromium(III) by Flame Atomic Absorption Spectrometry with a Chelating Ion-Exchange Flow Injection System A simple method is described for the simultaneous determination of chromium(VI) and chromium(III) in a flow injection system comprising chelating ion-exchange and flame atomic absorption spectrometry. Sampling rates for 2001 and 1 ml sample volumes were 120 and 60 h^–1 (240 and 120 speciations per hour), respectively. Typical relative standard deviations were 0.52% for Cr(VI) (0.50g ml^–1 and 0.67% for Cr(III) (0.10,g ml^–1) and the corresponding limits of detection were 85 ng ml^–1, and 16 ng ml^–1, respectively.On leave from University of Belgrade.     

Determination of palladium, platinum and gold by first derivative spectrophotometry

Summary The application of first-derivative spectrometry to the simultaneous determination of palladium(II), platinum(IV) and gold(III) is described. Light absorption of stable chlorocomplexes formed in 1 mol/l hydrochloric acid provides the basis of their determinations. A difference in the derivative amplitudes between two first-derivative zero crossing points of one metal A is read, corrected for the contribution of metal B and used for quantitation of metal C. Palladium (0.48–20 g ml^–1), platinum (0.16–24 g ml^–1) and gold (0.32–24 g ml^–1) have been determined with good precision and accuracy without any separations. Results are also presented for the simultaneous determination of the three precious metals in the presence of several major constituents.     

Differential pulse voltammetric methods for the simultaneous estimation of uranium-iron and uranium-cadmium mixtures in solution

Differential pulse voltammetric methods have been developed for the simultaneous estimation of the constituents of uranium-iron and uranium-cadmium mixtures in solution. A mixture of 1M H₃PO₄–1M KH₂PO₄ (with a pH1.5), was found to be the most ideal supporting electrolyte for both methods, among many that were evaluated for their suitability. In uranium-iron mixtures the calibration for iron was found to be linear up to 150 g ml^–1 (r²=0.9986), while that of uranium up to 500 g ml^–1 (r²=0.999). Iron at 6.7 g ml^–1 level could be determined in the presence of 800 fold uranium (wt/wt) without significant interference. Uranium at 21 g ml^–1 level could be analyzed with 5-fold iron (wt/wt). This upper limit of iron was due to the precipitation of iron as phosphate. In the case of uranium — cadmium mixtures, cadmium calibration for cadmium was found to be linear up to 1300 g ml^–1 (r²=0.9993). Concentration levels of 4.6 g ml^–1 Cd could be determined at a 500-fold excess (wt/wt) of uranium. Uranium calibration was linear up to 500 g ml^–1 (r²=0.999) and 21 g ml^–1 uranium could tolerate up to a 1000-fold excess of cadmium (wt/wt). Both procedures could tolerate 10 g ml^–1 levels of metal ions, such as chromium, copper, manganese, molybdenum and vanadium.     

Sensitive flotation-spectrophotometric method for the determination of vanadium (IV) with 3,5-dinitrosalicylic acid and rhodamine B

Vanadium(IV) is determined by reaction with 3,5-dinitrosalicylic acid and rhodamine B in weakly acidic medium. The flotation of the ternary ion-association complex is carried out with cyclohexane followed by dissolution in acetone for subsequent spectrophotometric determination. The molar absorptivity is 5.91×10⁵ l mole^–1 cm^–1 at 555 nm. Beer's law is obeyed in the range 0.05–1.5 g vanadium(IV) in 25 ml. The method is selective for vanadium(IV) in the presence of sodium fluoride and has been applied to standard reference materials.     

Extractive spectrophotometric determination of dioxouranium(VI) with the sodium salt of hexamethyleneiminecarbodithioate

The optimum conditions for the extractive spectrophotometric determination of dioxouranium(VI) with hexamethyleneiminecarbodithioate(HMICdt) have been established. Dioxouranium(VI) reacts with this ligand at pH 4.5 to form a yellowish-orange uncharged 12 metal-ligand complex which can be extracted by chloroform. The calibration graph was linear in the range of 1–20 g ml^–1 of dioxouranium(VI) at 335 nm. The molar absorptivity of the extracted species is 5.952×10³ l mol^–1 cm^–1 with Sandell's sensitivity of 0.04 g cm^–2. The average of 10 determinations of dioxouranium was 49.75 g for the samples containing 50 g of U(VI) and the variation from the mean at 95% confidence limit was 49.75±0.5955.     

Spectrofluorimetric determination of nucleic acids as 8-hydroxyquinoline/ yttrium ternary complexes

The formation of nucleic acids/8-hydroxyquinoline/yttrium(III) ternary complexes and their fluorescent properties have been studied. The nucleic acids studied include native and thermally denatured calf thymus DNA, fish sperm DNA and yeast RNA. In the range of pH 7.6–8.5, controlled by NH₃-NH₄C1 buffer, ternary complexes are formed that fluoresce at different wavelengths with different nucleic acids. Based on the fluorescence reactions, sensitive spectrofluorimetric methods for nucleic acids are proposed. In optimal conditions, the calibration curves were linear in the range 0.5–4.0 gml^–1 for calf thymus DNA, 0.5–2.5 g ml^–1 for fish sperm DNA and 0.5–4.0 g ml^–1 for yeast RNA. The limits of determination (3 ) were 0.030 g ml^–1 for calf thymus DNA, 0.020 g ml^–1 for fish sperm DNA and 0.090 g ml^–1 for yeast RNA. Corresponding to the interferences of coexisting substances, six synthetic samples were constructed and the results of determination were satisfactory.     

First Order Derivative Spectrophotometric Determination of Vanadium(V) and Iron(III) Individually and Simultaneously

A novel, sensitive and highly selective first derivative spectrophotometric method is proposed for the determination of vanadium(V) and iron(III) metal ions separately and simultaneously in a mixture. 2-Hydroxy-1-naphthaldehyde benzoylhydrazone (OHNABH) reacts with vanadium(V) and iron(III) in sodium acetate–acetic acid buffer medium (pH 5.0) forming yellow and yellowish brown colored soluble complexes, respectively. The first derivative curves of these colored solutions show maximum derivative amplitudes at 465 nm (V(V)) and 540 nm (Fe(III)) obeying Beer's law in the range 0.12–2.50 g ml^–1 and 0.14–4.20 g ml^–1, respectively. Large number of foreign ions do not interfere in the present method. A very simple and accurate simultaneous first derivative method is also reported for the determination of V(V) and Fe(III) in mixtures without solving simultaneous equations. The method is applied for the analysis of various natural samples, food and biological materials.     

Individual and sequential flow injection spectrophotometric determination of vanadium(V) and titanium(IV)

Summary Methods for the individual and sequential flow injection spectrophotometric determination of vanadium(V) and titanium(IV) are proposed, based on the formation of peroxo complexes. The detection limits are 1.0 × 10^–5 mol/l V (120 l) and 2.5 × 10^–6 mol/l Ti (80 l). A cation exchange resin mini-column is incorporated on-line into the vanadium manifold to remove the titanium complex and allow the vanadium to be determined selectively. A normal injection valve is used for the individual determinations, but it is modified for determination of V(V)/–Ti(IV) mixtures in order to introduce two samples sequentially into the reagent stream. One passes through a cation exchanger minicolumn, the other through an empty column, before reaching the detector. The former allows V alone to be measured, the latter V+Ti.

---

Individuelle und sequentielle spektralphotometrische Fließinjektionsbestimmung von Vanadium(V) und Titan(IV)

---

Dedicated to Prof. Dr. G. Tölg on the occasion of his 60th birthday     

Atomic-absorption spectrophotometric determination of ultramicro amounts of selenium(IV) and total selenium in sulphuric acid

Summary Ultramicro amounts of selenium in sulphuric acid are determined by a new atomic absorption spectrophotometric method. Selenium(IV) is directly determined ater extraction into toluene with an aromatic o-diamine and addition of nickel(II) prior to atomization; the determination of total selenium (0, IV and VI) needs a treatment of the sample with selected oxidizing and reducing agents.In the studied samples, total selenium (0.003–0.022 g of Se in 1 ml sulphuric acid) is present only in the tetravalent state. The detection limit of the method is 0.003 g of selenium.

---

Atomabsorptions-spektralphotometrische Bestimmung von Ultramikromengen Selen(IV) und Gesamtselen in Schwefelsäure

Zusammenfassung Selen(IV) kann direkt bestimmt werden nach Toluolextraktion der mit einem aromatischen o-Diamin behandelten Lösung und Zusatz von Nickel(II). Die Bestimmung von Gesamtselen (0, IV, VI) erfordert eine Vorbehandlung mit Perchlor- bzw. Salpetersäure und Wasserstoffperoxid. Die Nachweisgrenze des Verfahrens beträgt 0,003 g Se. In den untersuchten Proben war das Gesamtselen (0,003–0,022 g/ml) nur als Se(IV) vorhanden.

     

Extractive spectrophotometric determination of niobium(V) using 3-hydroxyflavone

A simple, rapid method for the spectrophotometric determination of niobium in trace amounts is presented, employing 3-hydroxyflavone as a ligand for the complexation of the metal ion and extracting the coloured complex into chloroform from 4M HClO₄ solution. Beer's law is obeyed in the range 0.0 to 3.2 g ml^–1 Nb(V), with a lower working limit of 0.1 g ml^–1 Nb(V). Molar absorptivity and Sandell's sensitivity of the complex at 395 nm are 4.088 × 10⁴l mol^–1 cm^–1 and 0.002g Nb(V) cm^–2, respectively. The stoichiometry of the complex is established as 12 by Job's and mole ratio methods. The method is free from the interference of a large number of analytically important elements. The proposed system handles satisfactorily the analysis of several samples of varying complexity. The results are highly reproducible with a relative standard deviation of 0.34% for 20 g of Nb.     

Spectrophotometric determination of gallium(III) with carminic acid and hexadecylpyridinium chloride

A Spectrophotometric method is proposed for determining dipyridamole in pure form and in pharmaceutical preparations. Chromotrope 2B was used as a charge-transfer complex forming agent with absorption maximum 40 nm red shifted relative to the chromotrope 2B itself. The variables affecting the formation of the C.T. complex were studied and optimized. Linear calibration graphs were obtained up to 60 g ml^–1 at room temperature. The method was found to be accurate, precise and can be successfully used for authentic and pharmaceutical preparations in the working range up to 600 g.A conductimetric method using phosphotungstic acid as ion-associate forming agent is proposed. The relative average error is 1–2%. Water-ethanol (12) mixture was used as solvent. Excellent recoveries and low standard deviations were obtained. Working ranges are 40–260 mg and 35–110 mg for pure dipyridamole and tablets, respectively.On leave from Department of Chemistry, Faculty of Science, Allepo University, Allepo, Syria     

Spectrophotometric determination of vanadium(V) with p-Sulphobenzeneazo-4-(2-amino-3-hydroxypyridine)

Summary p-Sulphobenzeneazo-4-(2-amino-3-hydroxypyridine) reacts with vanadium to form an orange-red coloured complex having maximum absorbance at 530 nm. The reaction is slow at room temperature, it is complete at 40–45° C in 5 min. The effects of temperature, time, pH, reagent concentration, and other variables have been studied. The system obeys Beer's law over the concentration range of 1–12g vanadium(V) ml^–1. The molar absorptivity is 5.453 x 10³l·mole^–1·cm^–1. The metal:ligand ratio of 12 was confirmed by Job's continuous variation and mole ratio methods.

---

Spektrophotometrische Bestimmung von Vanadin(V) mit p-Sulfobenzolazo-4-(2-amino-3-hydroxypyridin)

Zusammenfassung p-Sulfobenzolazo-4-(2-amino-3-hydroxypyridin) bildet mit Vanadin(V) einen orange-roten Komplex, dessen Absorptionsmaximum bei 530 nm liegt. Bei Zimmertemperatur verläuft die Reaktion langsam, bei 40–45° ist sie in 5 min vollständig. Der Einfluß von Temperatur, Zeit, pH, Reagenskonzentration und anderer variabler Faktoren wurde untersucht. Im Konzentrationsbereich 1–12g Vanadin/ml entspricht die Reaktion dem Beer-schen Gesetz. Die molare Absorptivität ist 5,453 x 10³l·mol^–1·cm^–1. Das Verhältnis Metall:Ligand wurde nach Job bestimmt und beträgt 12.

     

Colorimetric determination of vanadium with 5,7-dibromo-8-hydroxyquinoline after paper-chromatographic separation from interfering ions

Summary 5,7-Dibromo-8-hydroxyquinoline is recommended as reagent for the colorimetric determination of vanadium. The absorption is measured at 394 nm. Interfering ions are removed by paper chromatography with a collidine containing solvent. With amounts of 45–120 g of vanadium an error of ± 1 g has been obtained.

---

Zusammenfassung Zur colorimetrischen Vanadiumbestimmung wird 5,7-Dibrom-8-hydroxychinolin als Reagens empfohlen. Die Messung erfolgt bei 394 nm. Störende Ionen werden durch Papier-Chromatographie mit einem collidinhaltigen Fliemittel entfernt. Der Fehler betrug ±1 g bei Vanadiummengen von 45–120g.

     

Extract-photometric determination of vanadium(V) with 3-indole-acetohydroxamic acid

Summary A spectrophotometric study has been carried out of the violet complex 3-indole-acetohydroxamic acid-vanadium extracted into a solution of trioctylmethyl-ammonium chloride in toluene [_max 525 nm; =5381 l mol^–1 cm^–1; stoichiometry 1:3 (metal:reagent)]. A new method for the extract-spectrophotometric determination of V⁵⁺ in the range of 2–7 g/g is proposed and interferences by foreign ions were investigated. The method has been satisfactorily applied to the determination of vanadium(V) in fuel oil. The relative error is ±2.9%.     

Kinetic fluorimetric determination of carbamazepine in serum by the stopped-flow technique

Summary A simple, fast method for the determination of carbamazepine in serum is reported for the first time. It is based on the fluorescent reaction of this drug with cerium(IV) in an acid medium. A stopped-flow mixing module coupled to a conventional spectrofluorimeter is used for this purpose. The linear range of the proposed method is 0.04–140 g ml^–1 of carbamazepine and the detection limit is 0.01 g ml^–1. The within- and between-assay precision data and selectivity results show the method to be adequate for the determination of carbamazepine in serum by including a preliminary extraction step with dichloromethane. Analytical recoveries from different serum samples are reported.     

Spectrofluorimetric flow-injection determination of cerium in carbon and low alloy steels

Cerium can be determined spectrofluorimetrically (_em 350 nm, _ex 260 nm) based on the relatively intense native fluorescence of the cerium(III) aquo-ion. The main potential interference in the analysis of steel from iron(III), cerium(IV) and chromium(VI) are removed by use of a carrier solution containing 2.5% w/v hydroxylammonium chloride. The slight residual interference from iron(II) can be corrected by a matrix matching factor linearly related to the amount of iron present. The calibration graphs are linear over the range 0–7 g ml^–1 based on 250 l injection volumes. The sampling rate was 30 h^–1. The relative standard deviation was 2.0% (n=5) at 3 g ml^–1 cerium. The system has been applied to the determination of cerium in carbon or low alloy steels.     

Polarographisches Verhalten der C2-Halogenkohlenwasserstoffe

Summary Investigations on the polarographic and voltammetric behaviour of organic halogen compounds were carried out in order to obtain information on the redox properties and how to develop determination and detection methods. In this second report the dp-polarographic behaviour of the halogen substituted C₂-compounds has been studied in different supporting electrolytes and in various solvents. The electrode processes are discussed and the possibilities for the polarographic determination of the C₂-halogen hydrocarbons. The detection limit is 0.25 g · ml^–1 and the linear current-concentration relationship is observed up to 25 g · ml^–1. A simple and rapid method is proposed for the dp-polarographic determination of 1,2-dibromoethane in gasoline; the relative standard deviation for 20 g · ml^–1 is ±1.8%.     

Selective and sensitive extraction spectrophotometric method for the determination of vanadium (V) as a mixed ligand complex withN-phenyl benzohydroxamic acid and 4-(2-pyridylazo)resorcinol in non-aqueous media

A selective, sensitive and direct method for the spectrophotometric determination of vanadium in steels is developed in which vanadium is extracted withN-phenyl benzohydroxamic acid (PBHA) into chloroform from 5M hydrochloric acid medium followed by colour development by addition of 4-(2-pyridylazo)resorcinol (PAR) inN,N-dimethyl formamide (DMF). The vanadium(V)-PBHA-PAR mixed ligand complex shows maximum absorbance at 560 nm with a molar absorptivity 3.6 × 10⁴ l mol^–1 cm^–1 and obeys Beer's law up to 2.0 g/ml of vanadium. The composition of the mixed ligand complex is determined by Job's method of continuous variations which revealed a 1 1 1 ratio for V(V) PBHA PAR. This method can be directly applied for the determination of vanadium in steels, while in the case of titanium base alloys, after separation of titanium matrix it gives good results even at 50–200 g of vanadium per gram level.     

Extraction-spectrophotometric determination of uranium(VI) with PAR and N-octylacetamide

A new and simple method for selective spectrophotometric determination of uranium(VI) with 4-(2-pyridylazo)resorcinol (PAR) and N-octylacetamide into benzene over pH 7.0–9.0 is described. The molar absorptivity of the complex with 9 different amides is in the range of (0.40–3.2)·10⁴ 1·mol^–1·cm^–1 at the absorption maximum. Out of these, the most sensitive compound N-octylacetamide (OAA) was chosen for detailed studies in the present investigation. The detection limit of the method is 0.008 g U·ml^–1. The system obeys Beer's law in the range of 0–5 g U·ml^–1. The method is free from interferences of most of the common metal ions except vanadium(V) and copper(II), which are masked by proper masking agents. The composition of the complex is determined by curve-fitting method. The method has been applied for the recovery of the metal from rock samples and synthetic mixtures.