超声波采油技术的原理及应用

文章介绍了超声波技术在油井增产，防蜡，防垢及除垢和对原油的降粘等方面的作用原理和作用效果，并说明了超声波采油的适用范围。     

New Techniques and Designs of Focusing Piezoelectric Transducers for Ultrasonic Diagnostics and Therapy

New techniques of forming high intensity focused ultrasound (HIFU) fields using dynamic focusing and harmonic multifrequency excitation are developed for ultrasonic diagnostics and therapy. New designs of HIFU transducers based on high-performance composite materials are developed and studied. Finite-element and finite-difference simulations of HIFU transducers and processes of ultrasonic wave propagation in biological tissues are performed. The parameters of piezoceramic materials, piezoelements, and the acoustic fields of focusing ultrasonic transducers are measured. Experiments are performed on biological tissues ex vivo that confirm the efficiency, selectivity, and safety of the developed HIFU transducers and techniques of forming acoustic fields.     

Ultrasonic wave propagation in IIIrd group nitrides

The ultrasonic attenuation in hexagonal structured (wurtzite) third group nitrides (GaN, AlN and InN) has been evaluated at 300 K for an ultrasonic wave propagating along the unique axis of the crystal. Higher order elastic constants of these materials are calculated using the Lennard-Jones potential for the determination of ultrasonic attenuation. The ultrasonic velocity, Debye average velocity, thermal relaxation time and acoustic coupling constant are evaluated along the z-axis of the crystal using the second order elastic constants and other related parameters. The contributions of the elastic constants, thermal conductivity, thermal energy density, ultrasonic velocity and acoustic coupling constant to the total attenuation are studied. On the basis of the ultrasonic attenuation, it can be concluded that the AlN is more ductile than either GaN or InN at 300 K. Orientation dependent characterization has been achieved by calculation of the orientation dependent ultrasonic velocity, Debye average velocity and thermal relaxation time for the materials.     

基底上覆分层薄膜超声Scholte波特性与薄膜定征

分层薄膜-基底结构广泛应用于微电子器件等诸多领域,但薄膜材料参数超声测量尤其是横波速度的定征是一个困难的问题。本文对液固界面Scholte界面波的频散特性和脉冲激励的声压响应进行了理论分析。结果表明,液固界面Scholte波频散与分层膜-基底结构的速度分布密切相关。薄膜材料各层的厚度和横波速度对界面波频散特性有显著影响。基于Scholte界面波的频散特性,提出了一种多层膜的多参数反演定征方法。首先针对理论信号进行薄膜参数反演,验证了该方法的可行性。后续对不同类型的多层膜材料样品进行了液固界面波激发与采集实验,实验信号的薄膜参数反演结果进一步验证了该方法的可行性和有效性。     

纵向带状裂隙形貌的逆时偏移超声成像

传统的工业超声成像方法通常只能确定缺陷的位置与横向尺寸,无法获得缺陷的形貌信息.一些特殊的缺陷,如纵向裂纹,是典型的例子.基于多阵元技术,开展了固体介质缺陷逆时偏移超声成像方法的数值与实验研究.针对铝块平底纵裂纹及内部纵裂纹两种传统方法无法有效成像的缺陷,首先开展了单分量逆时偏移成像方法研究,给出了基于数值仿真的逆时偏移成像结果以及基于多阵元超声成像实验系统实验测试的逆时偏移成像结果.进一步开展了基于多分量位移检测与转换横波分离的逆时偏移成像方法研究,并提出了基于新型多分量激光干涉仪进行检测的思路.数值仿真结果证实了多分量逆时偏移图像重建结果可以克服单分量方式的缺点,得到明显优于单分量检测时的图像.     

Inverse problems in cancellous bone: estimation of the ultrasonic properties of fast and slow waves using Bayesian probability theory

Quantitative ultrasonic characterization of cancellous bone can be complicated by artifacts introduced by analyzing acquired data consisting of two propagating waves (a fast wave and a slow wave) as if only one wave were present. Recovering the ultrasonic properties of overlapping fast and slow waves could therefore lead to enhancement of bone quality assessment. The current study uses Bayesian probability theory to estimate phase velocity and normalized broadband ultrasonic attenuation (nBUA) parameters in a model of fast and slow wave propagation. Calculations are carried out using Markov chain Monte Carlo with simulated annealing to approximate the marginal posterior probability densities for parameters in the model. The technique is applied to simulated data, to data acquired on two phantoms capable of generating two waves in acquired signals, and to data acquired on a human femur condyle specimen. The models are in good agreement with both the simulated and experimental data, and the values of the estimated ultrasonic parameters fall within expected ranges.     

Quantitative evaluation of ultrasonic C-scan image in acoustically homogeneous and layered anisotropic materials using three dimensional ray tracing method

Quantitative evaluation of ultrasonic C-scan images in homogeneous and layered anisotropic austenitic materials is of general importance for understanding the influence of anisotropy on wave fields during ultrasonic non-destructive testing and evaluation of these materials. In this contribution, a three dimensional ray tracing method is presented for evaluating ultrasonic C-scan images quantitatively in general homogeneous and layered anisotropic austenitic materials. The directivity of the ultrasonic ray source in general homogeneous columnar grained anisotropic austenitic steel material (including layback orientation) is obtained in three dimensions based on Lamb’s reciprocity theorem. As a prerequisite for ray tracing model, the problem of ultrasonic ray energy reflection and transmission coefficients at an interface between (a) isotropic base material and anisotropic austenitic weld material (including layback orientation), (b) two adjacent anisotropic weld metals and (c) anisotropic weld metal and isotropic base material is solved in three dimensions. The influence of columnar grain orientation and layback orientation on ultrasonic C-scan image is quantitatively analyzed in the context of ultrasonic testing of homogeneous and layered austenitic steel materials. The presented quantitative results provide valuable information during ultrasonic characterization of homogeneous and layered anisotropic austenitic steel materials.     

多孔硅光致发光峰半峰全宽的压缩

硅发光对于在单一硅片上实现光电集成是至关重要的.目前已有的使硅产生发光的方法有:掺杂深能级杂质、掺稀土离子、多孔硅、纳米硅以及Si/SiO₂超晶格.声空化所引发的特殊的物理、化学环境为制备光致发光多孔硅薄膜提供了一条重要的途径.实验表明,声化学处理对于改善多孔硅的微结构,提高发光效率和发光稳定性都是一项非常有效的技术.超声波加强阳极电化学腐蚀制备发光多孔硅薄膜,比目前通用的常规方法制备的样品显示出更优良的性质.这种超声波的化学效应源于声空化,即腐蚀液中气泡的形成、生长和急剧崩溃.在多孔硅的腐蚀过程中,由于超声波的作用增加了孔中氢气泡的逸出比率和塌缩,有利于孔沿垂直方向的腐蚀,使多孔硅光致发光峰的半峰全宽压缩到了3.8nm.     

Theoretical examination of ultrasonic pole figures via comparison with the results analyzed by finite element polycrystal model

The ultrasonic wave velocities in a polycrystalline aggregate are sensitively influenced by texture development due to plastic deformation. According to Sayer's model, it is possible to construct ultrasonic pole figures via the crystallite orientation distribution function (CODF), which can be calculated by using ultrasonic wave velocities. In the previous papers, the theoretical modeling to simulate ultrasonic wave velocities propagating in solid materials under plastic deformation has been proposed by the authors and proved to be a good agreement with experimental results. Generally, wave velocities are dependent upon the propagating wave frequency; hence to evaluate texture development via ultrasonic pole figures it is necessary to examine an influence of frequency dependence on the ultrasonic wave velocities. In the present paper, the proposed theoretical modeling is applied to the texture characterization in polycrystalline aggregates of FCC metals under various plastic strain histories via ultrasonic pole figures, and also the frequency dependence is examined by using Granato-Lücke's dislocation strings model. Then the simulated ultrasonic pole figures are compared with the pole figures analyzed by the finite element polycrystal model (FEPM). The good qualitative agreement between both results suggests the sufficient accuracy of our proposed theoretical modeling.     

Study on removing calcium carbonate plug from near wellbore by high-power ultrasonic treatment

In this paper, the effects of ultrasonic wave on the removal of inorganic scaling and plugging in cores and the influence of the key wave field parameters, process parameters and core physical parameters on the plugging removal efficiency are systematically studied. The main dynamic mechanism of ultrasonic plugging removal is also systematically analyzed. Results show that the transducer frequency, transducer power, ultrasonic treatment time and initial permeability of core have great influence on the effect of ultrasonic scale removal. When the cumulative treatment time of ultrasonic wave exceeds 60 min, the recovery rate of core permeability tends to be stable. Best effect can be achieved when processing for 80–120 min cumulatively; the plugging removal effect is improved with the increase of ultrasonic transducer power and ultrasonic frequency, but the effect of plugging removal is not obvious with the further increasing of them. In addition, it is proved that the effect of removing calcium carbonate plug from near wellbore by hydrochloric acid solution is slightly better than that by ultrasonic treatment alone. Finally, the micro dynamic mechanism of removing inorganic scale plug by high-power ultrasonic treatment is discussed in view of ultrasonic inorganic scale body crushing, ultrasonic cavitation, ultrasonic friction, ultrasonic peristaltic transport operation and ultrasonic fracture-making and permeability-increasing effect.     

Application of Biot's theory to ultrasonic characterization of human cancellous bones: determination of structural, material, and mechanical properties

This paper is devoted to the experimental determination of distinctive macroscopic structural (porosity, tortuosity, and permeability) and mechanical (Biot-Willis elastic constants) properties of human trabecular bones. Then, the obtained data may serve as input parameters for modeling wave propagation in cancellous bones using Biot's theory. The goal of the study was to obtain experimentally those characteristics for statistically representative group of human bones (35 specimens) obtained from a single skeletal site (proximal femur). The structural parameters were determined using techniques devoted to the characterization of porous materials: electrical spectroscopy, water permeametry, and microcomputer tomography. The macroscopic mechanical properties, Biot-Willis elastic constants, were derived based on the theoretical consideration of Biot's theory, micromechanical statistical models, and experimental results of ultrasonic studies for unsaturated cancellous bones. Our results concerning structural parameters are consistent with the data presented by the other authors, while macroscopic mechanical properties measured within our studies are situated between the other published data. The discrepancies are mainly attributed to different mechanical properties of the skeleton frame, due to strong structural anisotropy varying from site to site. The results enlighten the difficulty to use Biot's theory for modeling wave propagation in cancellous bone, implying necessity of individual evaluation of input parameters.     

Review on second-harmonic generation of ultrasonic guided waves in solid media(Ⅰ): Theoretical analyses

Considering the high sensitivity of the nonlinear ultrasonic measurement technique and great advantages of the guided wave testing method, the use of nonlinear ultrasonic guided waves provides a promising means for evaluating and characterizing the hidden and/or inaccessible damage/degradation in solid media. Increasing attention on the development of the testing method based on nonlinear ultrasonic guided waves is largely attributed to the theoretical advances of nonlinear guided waves propagation in solid media. One of the typical acoustic nonlinear responses is the generation of second harmonics that can be used to effectively evaluate damage/degradation in materials/structures. In this paper, the theoretical progress of second-harmonic generation(SHG) of ultrasonic guided wave propagation in solid media is reviewed. The advances and developments of theoretical investigations on the effect of SHG of ultrasonic guided wave propagation in different structures are addressed. Some obscure understandings and the ideas in dispute are also discussed.     

Modeling the propagation of ultrasonic waves in the interface region between two bonded elements

An important task in nondestructive materials evaluation is the development of techniques to characterize the bond quality of adherent joints. Binding forces are nonlinear and cause a nonlinear modulation of transmitted and reflected ultrasonic waves. As a consequence, the higher harmonics generated by an insonified monochromatic wave give information about the adhesive bonds. The local binding forces in thin bonded interfaces can be obtained by the amplitudes of the ultrasonic waves of the insonified frequency and its higher harmonics as transmitted through the interface. Additional phase measurements may enable one to obtain the evaluation of the full hysteretic cycle of the interaction force. In order to gain a deeper understanding of the interface region and to improve the technique, numerical simulations of the ultrasonic wave propagation through specimens of two bonded elements can be used. A simple model based on the local interaction simulation approach (LISA) is described in this contribution, and a comparison between the results of the simulations and the experimental data is presented. Besides its intrinsic relevance for NDE, the problem considered in this paper may be very useful to analyze and test models for the simulation of ultrasonic wave propagation in nonclassical nonlinear mesoscopic elastic materials.     

Review on second-harmonic generation of ultrasonic guided waves in solid media (I):Theoretical analyses

Considering the high sensitivity of the nonlinear ultrasonic measurement technique and great advantages of the guided wave testing method, the use of nonlinear ultrasonic guided waves provides a promising means for evaluating and characterizing the hidden and/or inaccessible damage/degradation in solid media. Increasing attention on the development of the testing method based on nonlinear ultrasonic guided waves is largely attributed to the theoretical advances of nonlinear guided waves propagation in solid media. One of the typical acoustic nonlinear responses is the generation of second harmonics that can be used to effectively evaluate damage/degradation in materials/structures. In this paper, the theoretical progress of second-harmonic generation (SHG) of ultrasonic guided wave propagation in solid media is reviewed. The advances and developments of theoretical investigations on the effect of SHG of ultrasonic guided wave propagation in different structures are addressed. Some obscure understandings and the ideas in dispute are also discussed.     

超声显微检测方法对产氚包层焊缝的适用性研究

针对产氚包层中盖板流道封焊的结构设计与特点,开展了超声显微检测方法研究,确定了超声显微检测参数及该方法的适用性问题。以盖板流道封焊为研究对象,选择JSR DPR500 超声显微检测系统进行检测参数研究,分析了超声显微检测中探头参数及声束聚焦的特点;采用不同参数探头及水层厚度,提高了检测灵敏度,并解决了盖板流道封焊中小缺陷不易检出的难题。     

������΢��ⷽ���Բ�배��㺸����������о�

Based on the structure design and characteristics of the sealing welding of tritium-breeding blanket cap runner, the ultrasonic microscopic detection technology is studied. The testing parameters and the applicability of the method are determined. The JSR DPR500 ultrasonic microscopic detection system is selected to study the testing parameters. The characteristics of the probe parameters and the focus of the sound beam in the ultrasonic microscopy detection are analyzed. Different parameters and water layer thicknesses are used to improve the detection sensitivity. The problem that the small defects in the sealing welding of cap runner are difficult to detect is solved.     

Performances estimation of a rotary traveling wave ultrasonic motor based on two-dimension analytical model

The understanding of ultrasonic motor performances as a function of input parameters, such as the voltage amplitude, driving frequency, the preload on the rotor, is a key to many applications and control of ultrasonic motor. This paper presents performances estimation of the piezoelectric rotary traveling wave ultrasonic motor as a function of input voltage amplitude and driving frequency and preload. The Love equation is used to derive the traveling wave amplitude on the stator surface. With the contact model of the distributed spring-rigid body between the stator and rotor, a two-dimension analytical model of the rotary traveling wave ultrasonic motor is constructed. Then the performances of stead rotation speed and stall torque are deduced. With MATLAB computational language and iteration algorithm, we estimate the performances of rotation speed and stall torque versus input parameters respectively. The same experiments are completed with the optoelectronic tachometer and stand weight. Both estimation and experiment results reveal the pattern of performance variation as a function of its input parameters.     

Laser generation of convergent acoustic waves for materials inspection

A laser technique for generating convergent acoustic waves is described. The optically probed Rayleigh wave in the centre of convergence shows an amplification factor of the order of 20 with respect to a collimated surface wave. Applications to the ultrasonic characterization of layered materials and to crack detection are described.     

Ultrasonic wave propagation in cementitious materials: A multiphase approach of a self-consistent multiple scattering model

This paper examines ultrasonic wave propagation through strongly heterogeneous materials such as cementitious materials, and deals meanly with the formulation of a multiphase approach of a self-consistent multiple scattering model, the so-called dynamic generalized self-consistent model (DGSCM) proposed by Yang [J. Appl. Mech. 70(2003) 575-582]. This extended model can describe the influence of the size and volume fraction of aggregates on cementitious materials, as well as the interaction, contribution, and influence of entrapped air voids together with the aggregates on frequency-dependent parameters such as the phase velocity and the attenuation coefficient. To show the performance of this approach, theoretical predictions were compared with experimental ultrasonic measurements over a wide frequency range from several mortar specimens with different features in their microstructure properties and concentrations of aggregates up to 60%. The multiphase approaches of both the DGSCM and the Waterman-Truell model (WT) were also compared. The obtained results of the multiphase DGSCM were found to be significantly better than those obtained from the N-phase WT model for ultrasonic measurements from cementitious materials at high aggregate concentrations. The feasibility of material characterization using the multiphase approach of DGSCM was also discussed.