Solvent‐ and counterion‐specific swelling behavior of poly(acrylic acid) gels

The collapse of alkali metal poly(acrylate) (PAAM) gels was investigated for various water/organic solvent mixture systems: methanol (MeOH), ethanol (EtOH), 2‐propanol (2PrOH), t‐butanol (tBuOH), dimethyl sulfoxide (DMSO), acetonitrile (AcN), acetone, tetrahydrofuran (THF), and dioxane. In order to ascertain the counterion specificity in the swelling behavior, four kinds of alkali metal counterions were used: Li⁺, Na⁺, K⁺, and Cs⁺. Remarkable solvent and counterion specificities were observed for every counterion species and every solvent system, respectively. For example, in aqueous EtOH the dielectric constants (D_cr) at which collapse occurred were in the order PAACs < PAALi < PAAK < PAANa. On the other hand, the D_cr at which PAALi gel collapsed increased in the order tBuOH < dioxane < THF < MeOH < 2PrOH < EtOH < acetone < AcN < DMSO, where the D_cr ranged from about 39 to about 67. This was in contrast to our previous observation for a partially quaternized poly(4‐vinyl pyridine) (P4VP) gel, which collapsed in a much narrower D_cr region in similar mixed solvents. The present solvent‐ and counterion‐specific collapses are discussed on the basis of solvent properties such as the dielectric constant and Gutmann's donor number and acceptor number of a pure solvent. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2791–2800, 2000     

Facile Chemoselective synthesis of 2‐(2‐(Methoxycarbonyl)‐3‐oxo‐2,3‐dihydrobenzofuran‐2‐yl)benzoic acids and 3H,3’H‐Spiro[benzofuran‐2,1′‐isobenzofuran]‐3,3′‐dione derivatives

Oxidation of some derivatives of 4b,9b–dihydroxyindeno[1,2‐b]benzofuran‐10‐one have been investigated in detail using lead(IV) acetate in acetic acid under reflux conditions and periodic acid in aqueous ethanol at room temperature. We realized that during the first 5–15 minutes of the oxidation reactions in lead(IV) acetate/acetic acid system, 3H,3’H‐spiro[benzofuran‐2,1′‐isobenzofuran]‐3,3′‐dione derivatives have been synthesized chemo selectively, while, if the reaction mixtures stirred for additional 3 hours, the main products would be 2‐(2‐(Methoxycarbonyl)‐3‐oxo‐2,3‐dihydrobenzofuran‐2‐yl)benzoic acids. Moreover, room temperature oxidation of 4b,9b–dihydroxyindeno[1,2‐b]benzofuran‐10‐ones by periodic acid (H₅IO₆), leads to the formation of 3H,3’H‐spiro[benzofuran‐2,1′‐isobenzofuran]‐3,3′‐dione derivatives in good to excellent yields.     

Solvent‐ and Temperature‐Controlled In Situ Ligand Reactions Mediated by CuII and 3′‐[(E)‐{[(1S,2S)‐2‐Aminocyclohexyl]imino}methyl]‐4′‐hydroxy‐4‐biphenylcarboxlic Acid

Three new compounds, CuL, CuL′, and Cu₂O₂L′′₂ (H₂L=3′‐[(E)‐{[(1S,2S)‐2‐aminocyclohexyl]imino}methyl]‐4′‐hydroxy‐4‐biphenylcarboxlic acid, H₂L′=3′‐[(E)‐{[(1S,2S)‐2‐aminocyclohexyl]imino}methyl]‐4′‐hydroxy‐5′‐nitro‐4‐biphenylcarboxlic acid, H₂L′′=3′‐(N,N‐dimethylamino methyl)‐4′‐hydroxy‐4‐biphenylcarboxlic acid), were selectively synthesized through a controlled in situ ligand reaction system mediated by copper(II) nitrate and H₂L. Selective nitration was achieved by using different solvent mixtures under relatively mild conditions, and an interesting and economical reductive amination system in DMF/EtOH/H₂O was also found. All crystal structures were determined by single‐crystal X‐ray diffraction analysis. Both CuL and CuL′ display chiral 1D chain structures, whereas Cu₂O₂L′′₂ possesses a structure with 13×16 Å channels and a free volume of 41.4 %. The possible mechanisms involved in this in situ ligand‐controlled reaction system are discussed in detail.     

The Equally Important Role of Adenine Derivatives to That of Pyrimidine Derivatives in Near‐0 eV Electron‐Induced DNA Lesions

The role of adenine (A) derivatives in DNA damage is scarcely studied due to the low electron affinity of base A. Experimental studies demonstrate that low‐energy electron (LEE) attachment to adenine derivatives complexed with amino acids induces barrier‐free proton transfer producing the neutral N₇‐hydrogenated adenine radicals rather than conventional anionic species. To explore possible DNA lesions at the A sites under physiological conditions, probable bond ruptures in two models—N₇‐hydrogenated 2′‐deoxyadenosine‐3′‐monophosphate (3′‐dA(N7H)MPH) and 2′‐deoxyadenosine‐5′‐monophosphate (5′‐dA(N7H)MPH), without and with LEE attachment—are studied by DFT. In the neutral cases, DNA backbone breakage and base release resulting from C_3′?O_3′ and N₉?C_1′ bond ruptures, respectively, by an intramolecular hydrogen‐transfer mechanism are impossible due to the ultrahigh activation energies. On LEE attachment, the respective C_3′?O_3′ and N₉?C_1′ bond ruptures in [3′‐dA(N7H)MPH]^? and [5′‐dA(N7H)MPH]^? anions via a pathway of intramolecular proton transfer (PT) from the C_2′ site of 2′‐deoxyribose to the C₈ atom of the base moiety become effective, and this indicates that substantial DNA backbone breaks and base release can occur at non‐3′‐end A sites and the 3′‐end A site of a single‐stranded DNA in the physiological environment, respectively. In particular, compared to the results of previous theoretical studies, not only are the electron affinities of 3′‐dA(N7H)MPH and 5′‐dA(N7H)MPH comparable to those of hydrogenated pyrimidine derivatives, but also the lowest energy requirements for the C_3′?O_3′ and N₉‐glycosidic bond ruptures in [3′‐dA(N7H)MPH]^? and [5′‐dA(N7H)MPH]^? anions, respectively, are comparable to those for the C_3′?O_3′ and N₁‐glycosidic bond cleavages in corresponding anionic hydrogenated pyrimidine derivatives. Thus, it can be concluded that the role of adenine derivatives in single‐stranded DNA damage is equally important to that of pyrimidine derivatives in an irradiated cellular environment.     

Fe3O4@SiO2@sulfated boric acid as superparamagnetic and recyclable nanocatalyst‐assisted,one‐pot,pseudo four‐component synthesis of 5‐amino‐2‐aryl‐3H‐chromeno[4,3,2‐de][1,6]naphthyridine‐4‐carbonitrile derivatives

The catalytic performance of the superparamagnetic nanocatalyst Fe₃O₄@SiO₂@Sulfated boric acid as a green, recyclable, and acidic solid catalyst in the synthesis of chromeno[4,3,2‐de][1,6]naphthyridine derivatives has been studied. Chromeno[4,3,2‐de][1,6]naphthyridine derivatives via a pseudo four‐component reaction from aromatic aldehydes (1 mmol), malononitrile (2 mmol), and 2′‐hydroxyacetophenone in the presence of Fe₃O₄@SiO₂@Sulfated boric acid (0.004 g) as a nanocatalyst in 3 mL of water as a green solvent at 80°C has been synthesized. The advantages of this method are higher product yields in shorter reaction times, easy recyclability and reusability of the catalyst, and easy work‐up procedures. The nanocatalyst was reused at least six times. The nanocatalyst retained its stability in the reaction, and after reusability, it was separated easily from the reaction by an external magnet.     

New Route of Benzyne Cyclization for Synthesis of 2,3,4,5‐Tetrahydro‐1H‐pyrido[4,3‐b]indole Derivatives Avoiding Highly Toxic Aryl Hydrazines

A new route for the regioselective synthesis of 2,3,4,5‐tetrahydro‐1H‐pyrido[4,3‐b]indole derivatives was developed based on cyclization of 3‐chlorophenylimine‐N‐alkyl‐4‐piperidones by “the complex bases” of NaNH₂ or KNH₂. The procedure was performed under variable reaction conditions in inert proton‐free solvents, such as THF, dioxane, 1,2‐dimethoxyethane, toluene, and xylene, at temperatures varying from 20°C to boiling point of the solvent used. Toxic arylhydrazine intermediates occurring in the classical Fischer indole synthesis are avoided.     

Synthesizing 4′,4″(5″) Di‐tert‐butyldibenzo 18‐crown‐6 Monitored by Online FTIR

4′,4″(5″) Di‐tert‐butyldibenzo 18‐crown‐6 (DTBB18C6) was successfully synthesized by S_N2 nucleophilic substitution with 4‐tert‐butyl catechol as starting material. Effects of cyclization reagents, solvents, and templates were investigated. Reaction process was monitored by the real‐time online FTIR to study the actual reaction route. The highest DTBB18C6 yield (above 33%) was obtained by using Cs₂CO₃ as the template, 2,2′‐diethylene glycol ditosylate as the cyclization reagent, and THF as the solvent. From the result of FTIR, four different reaction stages of DTBB18C6 synthesis process were proposed.     

Isolation and Characterization,Including by X‐ray Crystallography,of Contact and Solvent‐Separated Ion Pairs of Silenyl Lithium Species

Reaction of bromoacylsilane 1 (pink solution) with tBu₂MeSiLi (3.5 equiv) in a 4:1 hexane:THF solvent mixture at −78 °C to room temperature yields the solvent separated ion pair (SSIP) of silenyl lithium E‐[(tBuMe₂Si)(tBu₂MeSi)C=Si(SiMetBu₂)]⁻ [Li⋅4THF]⁺ 2 a (green–blue solution). Removal of the solvent and addition of benzene converts 2 a into the corresponding contact ion pair (CIP) 2 b (violet–red solution) with two THF molecules bonded to the lithium atom. The 2 a ⇌ 2 b interconversion is reversible upon THF⇌ benzene solvent change. Both 2 a and 2 b were characterized by X‐ray crystallography, NMR and UV/Vis spectroscopy, and theoretical calculations. The degree of dissociation of the Si−Li bond has a large effect on the visible spectrum (and thus color) and on the silenylic ²⁹Si NMR chemical shift, but a small effect on the molecular structure. This is the first report of the X‐ray molecular structure of both the SSIP and the CIP of any R₂E=E′RM species (E=C, Si; E′=C, Si; M=metal).     

Ring transformations of heterocyclic compounds. XXIII. The UV irradiation product of photochromic 2,4,6‐triaryl‐1‐(spiro[2H‐l‐benzopyran‐2,2′‐indoline]‐6‐yl)pyridinium salts ‐ A phenolate betaine or a pyridinium substituted merocyanine dye?

The synthesis of the novel 2,4,6‐triaryl‐1‐(spiro[2H‐1‐benzopyran‐2,2′‐indoline]‐6‐yl)pyridiniumper‐chlorates 4 by reaction of 5 ‐nitrosalicylaldehydes 6 with 1,3,3‐trimethyl‐2‐methyleneindoline ( 7 ) to 6‐nitro‐spiro[2H‐1‐benzopyran‐2,2′‐indolines] 1 , their stannous chloride reduction to the 6‐amino derivatives 8 , followed by a 2,6‐[C₅+N] ring transformation with 2,4,6‐triarylpyrylium perchlorates 9 , is reported. UV irradiation experiments in twenty solvents of different polarity prove their photochromic properties and show that the photochemically generated negative solvatochromic dyes 5 , formed by ring opening of the benzopyran moiety of 4 , are rather merocyanine than pyridinium phenolate betaine dyes.     

Synthesis of Pyridophenanthrolines via a Three‐Component Reaction Involving 1,10‐Phenanthrolin‐5‐Amine

A facile and efficient method for the synthesis of benzo[b ]pyrido[3,2‐f ][1,7]phenanthrolines and dipyrido[4,3‐b :3′,2′‐f ][1,7]phenanthrolines has been developed in high yields. Using EtOH as a solvent without any additionally basic catalysts, the three‐component reaction of aromatic aldehyde, 1,10‐phenanthrolin‐5‐amine, and dimedone or piperidine‐2,4‐dione affords two novel classes of fused phentacyclic heterocycles containing both pyridine and phenanthroline moieties.     

Synthesis and characterization of novel fluorinated polyimides derived from 4,4′‐[2,2,2‐trifluoro‐1‐(3‐trifluoromethylphenyl)ethylidene]diphthalic anhydride and aromatic diamines

A novel fluorinated aromatic dianhydride, 4,4′‐[2,2,2‐trifluoro‐1‐(3‐trifluoromethyl‐phenyl)ethylidene]diphthalic anhydride (TFDA) was synthesized by coupling of 3′‐trifluoromethyl‐2,2,2‐trifluoroacetophenone with o‐xylene under the catalysis of trifluoromethanesulfonic acid, followed by oxidation of KMnO₄ and dehydration. A series of fluorinated aromatic polyimides derived from the novel fluorinated aromatic dianhydride TFDA with various aromatic diamines, such as p‐phenylenediamine (p‐PDA), 4,4′‐oxydianiline (ODA), 1,4‐bis(4‐aminophenoxy)benzene (p‐APB), 1,3‐bis(4‐amino‐phenoxy)benzene (m‐APB), 4‐(4‐aminophenoxy)‐3‐trifluoromethylphenylamine (3FODA) and 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)benzene (6FAPB), were prepared by polycondensation procedure. All the fluorinated polyimides were soluble in many polar organic solvents such as NMP, DMAc, DMF, and m‐cresol, as well as some of low boiling point organic solvents such as CHCl₃, THF, and acetone. Homogeneous and stable polyimide solutions with solid content as high as 35–40 wt % could be achieved, which were prepared by strong and flexible polyimide films or coatings. The polymer films have good thermal stability with the glass transition temperature of 232–322 °C, the temperature at 5% weight loss of 500–530 °C in nitrogen, and have outstanding mechanical properties with the tensile strengths of 80.5–133.2 MPa as well as elongations at breakage of 7.1–12.6%. It was also found that the polyimide films derived from TFDA and fluorinated aromatic diamines possess low dielectric constants of 2.75–3.02, a low dissipation factor in the range of 1.27–4.50 × 10^?3, and low moisture absorptions <1.3%. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4143–4152, 2004     

Flip‐type disorder in 3‐substituted 2,2′:5′,2′′‐terthiophenes

In the crystal structures of four thiophene derivatives, (E)‐3′‐[2‐(anthracen‐9‐yl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₂₈H₁₈S₃, (E)‐3′‐[2‐(1‐pyrenyl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₃₀H₁₈S₃, (E)‐3′‐[2‐(3,4‐dimethoxyphenyl)ethenyl]‐2,2′:5′,2′′‐terthiophene, C₂₂H₁₈O₂S₃, and (E,E)‐1,4‐bis[2‐(2,2′:5′,2′′‐terthiophen‐3′‐yl)ethenyl]‐2,5‐dimethoxybenzene, C₃₆H₂₆O₂S₆, at least one of the terminal thiophene rings is disordered and the disorder is of the flip type. The terthiophene fragments are far from being coplanar, contrary to terthiophene itself. The central C—C=C—C fragments are almost planar but the bond lengths suggest slight delocalization within this fragment. The crystal packing is determined by van der Waals interactions and some weak, relatively short, C—H...S and C—H...π directional contacts.     

An Efficient Synthesis of 3′‐Amino‐3′‐deoxyguanosine from Guanosine

3′‐Amino‐3′‐deoxyguanosine was synthesized from guanosine in eight steps and 58% overall yield. The 2′,3′‐diol of 5′‐O‐[(tert‐butyl)diphenylsilyl]‐2‐N‐[(dimethylamino)methylidene]guanosine was reacted with α‐acetoxyisobutyryl bromide and treated with 0.5n NH₃ in MeOH to yield 9‐{2′‐O‐acetyl‐3′‐bromo‐5′‐O‐[(tert‐butyl)diphenylsilyl]‐3′‐deoxy‐β‐D ‐xylofuranosyl]‐2‐N‐[(dimethylamino)methylidene]guanine, which was reacted with benzyl isocyanate, NaH, and then 3.0n NaOH, and finally with Pd/C (10%) and HCO₂NH₄ in EtOH/AcOH to afford 3′‐amino‐3′‐deoxyguanosine.     

One‐pot,Three‐component Synthesis of a New Series of 2‐Amino‐4‐aroyl‐5‐oxo‐5,6‐dihydro‐2H‐pyrano[3,2‐c]quinoline‐3‐carbonitrile in the Presence of SBA‐15 as a Nanocatalyst

One‐pot, three‐component reaction of arylglyoxals, malononitrile and 4‐hydroxyquinolin‐2(1H)‐one in the presence of SBA‐15 as a nanocatalyst and using green solvent systems under various temperatures afforded the 2‐amino‐4‐aroyl‐5‐oxo‐5,6‐dihydro‐2H‐pyrano[3,2‐c]quinoline‐3‐carbonitrile derivatives. The best yield (70‐96%) were obtained using 20% mol of SBA‐15 as a nanocatalyst in H2O/EtOH (1:1) at 80 °C. The simplicity of work up procedure, using green solvent system, and good to excellent yields of products are the main advantages of this synthetic strategy.     

One‐Pot Three‐Component Synthesis of Pyrido[2,3‐c]carbazole Derivatives in EtOH under Catalyst‐Free Conditions

A three‐component reaction of aromatic aldehydes, 9‐ethyl‐9H‐carbazol‐3‐amine, and cyclopentane‐1,3‐dione or tetronic acid was carried out in EtOH at refluxing and gave two series of 2,3,7,12‐tetrahydrocyclopenta[5,6]pyrido[2,3‐c ]carbazol‐1(4H )‐one and 3,4,7,12‐tetrahydro‐1H‐furo[3′,4′:5,6]pyrido[2,3‐c ]carbazol‐1‐one derivatives, respectively. This procedure approach to pyrido[2,3‐c ]carbazoles has the advantages of milder reaction conditions, one‐pot, catalyst free, and high yields.     

Efficient Synthesis of Novel Coumarin‐3‐carboxamides (=2‐Oxo‐2H‐1‐benzopyran‐3‐carboxamides) Containing Lipophilic Spacers

The novel coumarin‐3‐carboxamides (=2‐oxo‐2H‐1‐benzopyran‐3‐carboxamides) 5a – 5g containing lipophilic spacers were synthesized through the Ugi‐four‐component reaction (Scheme 1). The reactions of aromatic aldehydes 1 , 4,4′‐oxybis[benzenamine] or 4,4′‐methylenebis[benzenamine] as diamine 2 , coumarin‐3‐carboxylic acid (=2‐oxo‐2H‐benzopyran‐3‐carboxylic acid; 3 ), and alkyl isocyanides 4 lead to the desired substituted coumarin‐3‐carboxamides 5a – 5g at room temperature with high bond‐forming efficiency. These novel coumarin derivatives exhibit brilliant fluorescence at 544 nm in CHCl₃.     

Reliable Chemical Synthesis of Oligoribonucleotides (RNA) with 2′‐O‐[(Triisopropylsilyl)oxy]methyl(2′‐O‐tom)‐Protected Phosphoramidites

A method for the introduction of the 2′‐O‐[(triisopropylsilyl)oxy]methyl (=tom) group into N‐acetylated, 5′‐O‐dimethoxytritylated ribonucleosides is presented. The corresponding 2′‐O‐tom‐protected phosphoramidite building blocks were obtained in pure form and were successfully employed for the routine synthesis of oligoribonucleotides on DNA synthesizers. Under DNA coupling conditions (2.5 min coupling time for a 1.5‐μmol synthesis scale) and with 5‐(benzylthio)‐1H‐tetrazole (BTT) as activator, 2′‐O‐tom‐protected phosphoramidites exhibited average coupling yields >99.4%. The combination of N‐acetyl and 2′‐O‐tom protecting groups allowed a reliable and complete two‐step deprotection, first with MeNH₂ in EtOH/H₂O and then with Bu₄NF in THF, without concomitant destruction of the product RNA sequences.     

Diversity‐Oriented Synthesis of Novel 2′‐Aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] Derivatives via a One‐Pot Four‐Component Reaction

A sequential one‐pot four‐component reaction for the efficient synthesis of novel 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] derivatives 5 in the presence of AcONH₄ as a neutral, inexpensive, and dually activating catalyst is described (Scheme 1). The syntheses are achieved by reacting ninhydrin ( 1 ) with benzene‐1,2‐diamines 2 to give indenoquinoxalines, which are trapped in situ by malono derivatives 2 and various α‐methylenecarbonyl compounds 4 through cyclization, providing the multifunctionalized 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] analogs 5 . This chemistry provides an efficient and promising synthetic way of proceeding for the diversity‐oriented construction of the spiro[indenoquinoxalino‐pyran] skeleton.     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Preparation of non‐spherical particles from amphiphilic block copolymers

Simple self‐assembly techniques to fabricate non‐spherical polymer particles, where surface composition and shape can be tuned through temperature and the choice of non‐solvents was developed. A series of amphiphilic polystyrene‐b‐poly(2‐ethyl‐2‐oxazoline) block copolymers were prepared and through solvent exchange techniques using varying non‐solvent composition a range of non‐spherical particles were formed. Faceted phase separated particles approximately 300 nm in diameter were obtained when self‐assembled from tetrahydrofuran (THF) into water compared with unique large multivesicular particles of 1200 nm size being obtained when assembled from THF into ethanol (EtOH). A range of intermediate structures were also prepared from a three part solvent system THF/water/EtOH. These techniques present new tools to engineer the self‐assembly of non‐spherical polymer particles. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 750–757