Ethyl 1,4‐Dihydro‐4‐oxo‐1,8‐naphthyridine‐3‐carboxylates by a Tandem SNAr‐Addition‐Elimination Reaction

A series of N‐substituted 1,4‐dihydro‐4‐oxo‐1,8‐naphthyridine‐3‐carboxylate esters has been prepared in two steps from ethyl 2‐(2‐chloronicotinoyl)acetate. Treatment of the β‐ketoester with N,N‐dimethylformamide dimethyl acetal in N,N‐dimethylformamide (DMF) gave a 95% yield of the 2‐dimethylaminomethylene derivative. Subsequent reaction of this β‐enaminone with primary amines in DMF at 120^oC for 24 h then afforded the target compounds in 47–82% yields by a tandem S_NAr‐addition‐elimination reaction. Synthetic and procedural details as well as a mechanistic rationale are presented.     

“Reduced” Coumarin Dyes with an O‐Phosphorylated 2,2‐Dimethyl‐4‐(hydroxymethyl)‐1,2,3,4‐tetrahydroquinoline Fragment: Synthesis,Spectra, and STED Microscopy

Large Stokes‐shift coumarin dyes with an O‐phosphorylated 4‐(hydroxymethyl)‐2,2‐dimethyl‐1,2,3,4‐tetrahydroquinoline fragment emitting in the blue, green, and red regions of the visible spectrum were synthesized. For this purpose, N‐substituted and O‐protected 1,2‐dihydro‐7‐hydroxy‐2,2,4‐trimethylquinoline was oxidized with SeO₂ to the corresponding α,β‐unsaturated aldehyde and then reduced with NaBH₄ in a “one‐pot” fashion to yield N‐substituted and 7‐O‐protected 4‐(hydroxymethyl)‐7‐hydroxy‐2,2‐dimethyl‐1,2,3,4‐tetrahydroquinoline as a common precursor to all the coumarin dyes reported here. The photophysical properties of the new dyes (“reduced coumarins”) and 1,2‐dihydroquinoline analogues (formal precursors) with a trisubstituted C=C bond were compared. The “reduced coumarins” were found to be more photoresistant and brighter than their 1,2‐dihydroquinoline counterparts. Free carboxylate analogues, as well as their antibody conjugates (obtained from N‐hydroxysuccinimidyl esters) were also prepared. All studied conjugates with secondary antibodies afforded high specificity and were suitable for fluorescence microscopy. The red‐emitting coumarin dye bearing a betaine fragment at the C‐3‐position showed excellent performance in stimulation emission depletion (STED) microscopy.     

Mechanism of the Pd‐catalyzed Decarboxylative Allylation of α‐Imino Esters: Decarboxylation via Free Carboxylate Ion

The Pd‐catalyzed decarboxylative allylation of α‐(diphenylmethylene)imino esters ( 1 ) or allyl diphenylglycinate imines ( 2 ) is an efficient method to construct new C(sp³)? C(sp³) bonds. The detailed mechanism of this reaction was studied by theoretical calculations [ONIOM(B3LYP/LANL2DZ+p:PM6)] combined with experimental observations. The overall catalytic cycle was found to consist of three steps: oxidative addition, decarboxylation, and reductive allylation. The oxidative addition of 1 to [(dba)Pd(PPh₃)₂] (dba=dibenzylideneacetone) produces an allylpalladium cation and a carboxylate anion with a low activation barrier of +9.1 kcal mol^?1. The following rate‐determining decarboxylation proceeds via a solvent‐exposed α‐imino carboxylate anion rather than an O‐ligated allylpalladium carboxylate with an activation barrier of +22.7 kcal mol^?1. The 2‐azaallyl anion generated by this decarboxylation attacks the face of the allyl ligand opposite to the Pd center in an outer‐sphere process to produce major product 3 , with a lower activation barrier than that of the minor product 4 . A positive linear Hammett correlation [ρ=1.10 for the PPh₃ ligand] with the observed regioselectivity ( 3 versus 4 ) supports an outer‐sphere pathway for the allylation step. When Pd combined with the bis(diphenylphosphino)butane (dppb) ligand is employed as a catalyst, the decarboxylation still proceeds via the free carboxylate anion without direct assistance of the cationic Pd center. Consistent with experimental observations, electron‐withdrawing substituents on 2 were calculated to have lower activation barriers for decarboxylation and, thus, accelerate the overall reaction rates.     

Iron‐Promoted ortho‐ and/or ipso‐Hydroxylation of Benzoic Acids with H2O2

Regioselective hydroxylation of aromatic acids with hydrogen peroxide proceeds readily in the presence of iron(II) complexes with tetradentate aminopyridine ligands [Fe^II(BPMEN)(CH₃CN)₂](ClO₄)₂ ( 1 ) and [Fe^II(TPA)(CH₃CN)₂](OTf)₂ ( 2 ), where BPMEN=N,N′‐dimethyl‐N,N′‐bis(2‐pyridylmethyl)‐1,2‐ethylenediamine, TPA=tris‐(2‐pyridylmethyl)amine. Two cis‐sites, which are occupied by labile acetonitrile molecules in 1 and 2 , are available for coordination of H₂O₂ and substituted benzoic acids. The hydroxylation of the aromatic ring occurs exclusively in the vicinity of the anchoring carboxylate functional group: ortho‐hydroxylation affords salicylates, whereas ipso‐hydroxylation with concomitant decarboxylation yields phenolates. The outcome of the substituent‐directed hydroxylation depends on the electronic properties and the position of substituents in the molecules of substrates: 3‐substituted benzoic acids are preferentially ortho‐hydroxylated, whereas 2‐ and, to a lesser extent, 4‐substituted substrates tend to undergo ipso‐hydroxylation/decarboxylation. These two pathways are not mutually exclusive and likely proceed via a common intermediate. Electron‐withdrawing substituents on the aromatic ring of the carboxylic acids disfavor hydroxylation, indicating an electrophilic nature for the active oxidant. Complexes 1 and 2 exhibit similar reactivity patterns, but 1 generates a more powerful oxidant than 2 . Spectroscopic and labeling studies exclude acylperoxoiron(III) and Fe^IV?O species as potential reaction intermediates, but strongly indicate the involvement of an Fe^III? OOH intermediate that undergoes intramolecular acid‐promoted heterolytic O? O bond cleavage, producing a transient iron(V) oxidant.     

trans‐Bis(dimethyl sulfoxide‐κO)bis(3‐oxo‐3,4‐dihydroquinoxaline‐2‐carboxylato‐κ2N1,O2)copper(II)

The title compound, [Cu(C₉H₅N₂O₃)₂(C₂H₆OS)₂], consists of octahedrally coordinated Cu^II ions, with the 3‐oxo‐3,4‐dihydroquinoxaline‐2‐carboxylate ligands acting in a bidentate manner [Cu—O = 1.9116 (14) Å and Cu—N = 2.1191 (16) Å] and a dimethyl sulfoxide (DMSO) molecule coordinated axially via the O atom [Cu—O = 2.336 (5) and 2.418 (7) Å for the major and minor disorder components, respectively]. The whole DMSO molecule exhibits positional disorder [0.62 (1):0.38 (1)]. The octahedron around the Cu^II atom, which lies on an inversion centre, is elongated in the axial direction, exhibiting a Jahn–Teller effect. The ligand exhibits tautomerization by H‐atom transfer from the hydroxyl group at position 3 to the N atom at position 4 of the quinoxaline ring of the ligand. The complex molecules are linked through an intermolecular N—H...O hydrogen bond [N...O = 2.838 (2) Å] formed between the quinoxaline NH group and a carboxylate O atom, and by a weak intermolecular C—H...O hydrogen bond [3.392 (11) Å] formed between a carboxylate O atom and a methyl C atom of the DMSO ligand. There is a weak intramolecular C—H...O hydrogen bond [3.065 (3) Å] formed between a benzene CH group and a carboxylate O atom.     

A Convenient Synthesis of N‐Aryl Benzamides by Rhodium‐Catalyzed ortho‐Amidation and Decarboxylation of Benzoic Acids

The rhodium‐catalyzed amidation of substituted benzoic acids with isocyanates by directed C?H functionalization followed by decarboxylation to afford the corresponding N‐aryl benzamides is demonstrated, in which the carboxylate serves as a unique, removable directing group. Notably, less common meta‐substituted N‐aryl benzamides are generated readily from more accessible para‐ or ortho‐substituted groups by employing this strategy.     

Diaquabis(quinoxaline‐2‐carboxylato‐κ2N1,O)copper(II)

In the title compound, [Cu(C₉H₅N₂O₂)₂(H₂O)₂], the Cu^II ion lies on an inversion centre and has an elongated centrosymmetric octahedral environment, equatorially trans‐coordinated by two N,O‐bidentate quinoxaline‐2‐carboxylate ligands and axially coordinated by two water O atoms. Symmetry‐related molecules are linked by strong O—H...O hydrogen bonds, involving the uncoordinated carboxyl O atom of the carboxylate group and the coordinated water molecules, to form a two‐dimensional network. Weak intermolecular C—H...N interactions also stabilize the crystal structure.     

Four N7‐alkoxybenzyl‐substituted 4,5,6,7‐tetrahydro‐1H‐pyrazolo[3,4‐b]pyridine‐5‐spiro‐1′‐cyclohexane‐2′,6′‐diones: hydrogen‐bonded supramolecular structures in zero,one, two or three dimensions

3‐tert‐Butyl‐7‐(4‐methoxybenzyl)‐4′,4′‐dimethyl‐1‐phenyl‐4,5,6,7‐tetrahydro‐1H‐pyrazolo[3,4‐b]pyridine‐5‐spiro‐1′‐cyclohexane‐2′,6′‐dione, C₃₁H₃₇N₃O₃, (I), 3‐tert‐butyl‐7‐(2,3‐dimethoxybenzyl)‐4′,4′‐dimethyl‐1‐phenyl‐4,5,6,7‐tetrahydro‐1H‐pyrazolo[3,4‐b]pyridine‐5‐spiro‐1′‐cyclohexane‐2′,6′‐dione, C₃₂H₃₉N₃O₄, (II), 3‐tert‐butyl‐4′,4′‐dimethyl‐7‐(3,4‐methylenedioxybenzyl)‐1‐phenyl‐4,5,6,7‐tetrahydro‐1H‐pyrazolo[3,4‐b]pyridine‐5‐spiro‐1′‐cyclohexane‐2′,6′‐dione, C₃₁H₃₅N₃O₄, (III), and 3‐tert‐butyl‐4′,4′‐dimethyl‐1‐phenyl‐7‐(3,4,5‐trimethoxybenzyl)‐4,5,6,7‐tetrahydro‐1H‐pyrazolo[3,4‐b]pyridine‐5‐spiro‐1′‐cyclohexane‐2′,6′‐dione ethanol 0.67‐solvate, C₃₃H₄₁N₃O₅·0.67C₂H₆O, (IV), all contain reduced pyridine rings having half‐chair conformations. The molecules of (I) and (II) are linked into centrosymmetric dimers and simple chains, respectively, by C—H...O hydrogen bonds, augmented only in (I) by a C—H...π hydrogen bond. The molecules of (III) are linked by a combination of C—H...O and C—H...π hydrogen bonds into a chain of edge‐fused centrosymmetric rings, further linked by weak hydrogen bonds into supramolecular arrays in two or three dimensions. The heterocyclic molecules in (IV) are linked by two independent C—H...O hydrogen bonds into sheets, from which the partial‐occupancy ethanol molecules are pendent. The significance of this study lies in its finding of a very wide range of supramolecular aggregation modes dependent on rather modest changes in the peripheral substituents remote from the main hydrogen‐bond acceptor sites.     

Microwave‐accelerated synthesis of benzyl 3,5‐dimethyl‐pyrrole‐2‐carboxylate

Benzyl 3,5‐dimethyl‐pyrrole‐2‐carboxylate, a very useful pyrrole in porphyrin and dipyrromethene synthesis, can be synthesized via the Knorr‐type reaction, but in low yield. Alternative routes to benzyl 3,5‐dimethyl‐pyrrole‐2‐carboxylate have been developed involving the trans‐esterification of ethyl 3,5‐dimethyl‐pyrrole‐2‐carboxylate and the de‐acetylation of benzyl 4‐acetyl‐3,5‐dimethyl‐2‐carboxylate, both precursors being easily obtained using the Knorr reaction. These traditional methods involve treatment of the known products with a strong basic solution or heating for extended periods which often lead to decomposition. The use of microwave energy to promote these two reactions proves to be an extremely efficient way to obtain benzyl 3,5‐dimethyl‐pyrrole‐2‐carboxylate quickly, in high yield, and in excellent purity with no need for recrystallization. Of particular note is the use of catalytic sodium methoxide in benzyl alcohol, rather than stoichiometric amounts of sodium benzoxide, to effect benzylation.     

Three sterically hindered 6‐amino‐5‐cyano‐2‐methyl‐4‐(1‐naphthyl)‐4H‐pyran‐3‐carboxylate derivatives

In the title compounds, 2‐methoxyethyl 6‐amino‐5‐cyano‐2‐methyl‐4‐(1‐naphthyl)‐4H‐pyran‐3‐carboxylate, C₂₁H₂₀N₂O₄, (II), isopropyl 6‐amino‐5‐cyano‐2‐methyl‐4‐(1‐naphthyl)‐4H‐pyran‐3‐carboxylate, C₂₁H₂₀N₂O₃, (III), and ethyl 6‐amino‐5‐cyano‐2‐methyl‐4‐(1‐naphthyl)‐4H‐pyran‐3‐carboxylate, C₂₀H₁₈N₂O₃, (IV), the heterocyclic pyran ring adopts a flattened boat conformation. In (II) and (III), the carbonyl group and a double bond of the heterocyclic ring are mutually anti, but in (IV) they are mutually syn. The ester O atoms in (II) and (III) and the carbonyl O atom in (IV) participate in intramolecular C—H...O contacts to form six‐membered rings. The dihedral angles between the naphthalene substituent and the closest four atoms of the heterocyclic ring are 73.3 (1), 71.0 (1) and 74.3 (1)° for (II)–(IV), respectively. In all three structures, only one H atom of the NH₂ group takes part in N—H...O [in (II) and (III)] or N—H...N [in (IV)] intermolecular hydrogen bonds, and chains [in (II) and (III)] or dimers [in (IV)] are formed. In (II), weak intermolecular C—H...O and C—H...N hydrogen bonds, and in (III) intermolecular C—H...O hydrogen bonds link the chains into ladders along the a axis.     

Zwitterionic Phosphoranides as Intermediates in the Reaction of Phosphorus Tribromide with N,N‐Dimethyl‐N′‐arylformamidines

Cyclic zwitterionic phosphoranides 2a,b were found to be intermediate products in the reaction of N,N‐dimethyl‐N′‐(aryl)formamidines with PBr₃. The structure of phosphoranide 2a was determined by means of the X‐ray and quantum chemistry investigations. Mechanism of its formation was proposed based on Density functional theory (DFT) calculations. Reactions of 2 with amines and selenium yielded either C‐phosphorylated formamidines or benzazaphospholes. The first example of intramolecular heterocyclization of a pentavalent phosphorus derivative 15b into 3Н‐1,3‐benzazaphosphole has been demonstrated.     

In situ synthesis of mononuclear copper(II) complexes of the new tridentate ligand bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine

Two mononuclear copper complexes, {bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐κN²)methyl]amine‐κN}(3,5‐dimethyl‐1H‐pyrazole‐κN²)(perchlorato‐κO)copper(II) perchlorate, [Cu(ClO₄)(C₅H₈N₂)(C₁₂H₁₉N₅)]ClO₄, (I), and {bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐κN²)methyl]amine‐κN}bis(3,5‐dimethyl‐1H‐pyrazole‐κN²)copper(II) bis(hexafluoridophosphate), [Cu(C₅H₈N₂)₂(C₁₂H₁₉N₅)](PF₆)₂, (II), have been synthesized by the reactions of different copper salts with the tripodal ligand tris[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine (TDPA) in acetone–water solutions at room temperature. Single‐crystal X‐ray diffraction analysis revealed that they contain the new tridentate ligand bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine (BDPA), which cannot be obtained by normal organic reactions and has thus been captured in the solid state by in situ synthesis. The coordination of the Cu^II ion is distorted square pyramidal in (I) and distorted trigonal bipyramidal in (II). The new in situ generated tridentate BDPA ligand can act as a meridional or facial ligand during the process of coordination. The crystal structures of these two compounds are stabilized by classical hydrogen bonding as well as intricate nonclassical hydrogen‐bond interactions.     

Ethyl 1,4‐dihydro‐4‐oxo‐3‐quinolinecarboxylates by a tandem addition‐elimination‐SNAr reaction

The ethyl 1,4‐dihydro‐4‐oxo‐3‐quinolinecarboxylate ring structure, important in several drug compounds, has been prepared in two steps from ethyl 2‐(2‐fluorobenzoyl)acetate. Treatment of this β‐ketoester with N,N‐dimethylformamide dimethyl acetal gives a 97% yield of the 2‐dimethylaminomethylene derivative. Reaction of this β‐enaminone with primary amines in N,N‐dimethylformamide at 140°C for 48 h then affords the 1,4‐dihydro‐4‐oxo‐3‐quinolinecarboxylate esters in 60–74% yields by a tandem addition‐elimination‐S_NAr reaction. The synthesis of the starting material as well as procedural details and a mechanistic scenario are presented. J. Heterocyclic Chem., (2011).     

Different molecular conformations co‐exist in each of three 2‐aryl‐N‐(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)acetamides: hydrogen bonding in zero,one and two dimensions

4‐Antipyrine [4‐amino‐1,5‐dimethyl‐2‐phenyl‐1H‐pyrazol‐3(2H)‐one] and its derivatives exhibit a range of biological activities, including analgesic, antibacterial and anti‐inflammatory, and new examples are always of potential interest and value. 2‐(4‐Chlorophenyl)‐N‐(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)acetamide, C₁₉H₁₈ClN₃O₂, (I), crystallizes with Z′ = 2 in the space group P, whereas its positional isomer 2‐(2‐chlorophenyl)‐N‐(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)acetamide, (II), crystallizes with Z′ = 1 in the space group C2/c; the molecules of (II) are disordered over two sets of atomic sites having occupancies of 0.6020 (18) and 0.3980 (18). The two independent molecules of (I) adopt different molecular conformations, as do the two disorder components in (II), where the 2‐chlorophenyl substituents adopt different orientations. The molecules of (I) are linked by a combination of N—H…O and C—H…O hydrogen bonds to form centrosymmetric four‐molecule aggregates, while those of (II) are linked by the same types of hydrogen bonds forming sheets. The related compound N‐(1,5‐dimethyl‐3‐oxo‐2‐phenyl‐2,3‐dihydro‐1H‐pyrazol‐4‐yl)‐2‐(3‐methoxyphenyl)acetamide, C₂₀H₂₁N₃O₃, (III), is isomorphous with (I) but not strictly isostructural; again the two independent molecules adopt different molecular conformations, and the molecules are linked by N—H…O and C—H…O hydrogen bonds to form ribbons. Comparisons are made with some related structures, indicating that a hydrogen‐bonded R₂²(10) ring is the common structural motif.     

The inner‐salt zwitterion,the dihydrochloride dihydrate and the dimethyl sulfoxide disolvate of 3,6‐bis(pyridin‐2‐yl)pyrazine‐2,5‐dicarboxylic acid

In the inner‐salt zwitterion of 3,6‐bis(pyridin‐2‐yl)pyrazine‐2,5‐dicarboxylic acid, (I), namely 5‐carboxy‐3‐(pyridin‐1‐ium‐2‐yl)‐6‐(pyridin‐2‐yl)pyrazine‐2‐carboxylate, [C₁₆H₁₀N₄O₄, (Ia)], the pyrazine ring has a twist–boat conformation. The opposing pyridine and pyridinium rings are almost perpendicular to one another, with a dihedral angle of 80.24 (18)°, and are inclined to the pyrazine mean plane by 36.83 (17) and 43.74 (17)°, respectively. The carboxy and carboxylate groups are inclined to the mean plane of the pyrazine ring by 43.60 (17) and 45.46 (17)°, respectively. In the crystal structure, the molecules are linked via N—H...O and O—H...O hydrogen bonds, leading to the formation of double‐stranded chains propagating in the [010] direction. On treating (Ia) with aqueous 1 M HCl, the diprotonated dihydrate form 2,2′‐(3,6‐dicarboxypyrazine‐2,5‐diyl)bis(pyridin‐1‐ium) dichloride dihydrate [C₁₆H₁₂N₄O₄²⁺·2Cl⁻·2H₂O, (Ib)] was obtained. The cation lies about an inversion centre. The pyridinium rings and carboxy groups are inclined to the planar pyrazine ring by 55.53 (9) and 19.8 (2)°, respectively. In the crystal structure, the molecules are involved in N—H...Cl, O—H...O_water and O_water—H...Cl hydrogen bonds, leading to the formation of chains propagating in the [010] direction. When (Ia) was recrystallized from dimethyl sulfoxide (DMSO), the DMSO disolvate 3,6‐bis(pyridin‐2‐yl)pyrazine‐2,5‐dicarboxylic acid dimethyl sulfoxide disolvate [C₁₆H₁₀N₄O₄·2C₂H₆OS, (Ic)] of (I) was obtained. Here, the molecule of (I) lies about an inversion centre and the pyridine rings are inclined to the planar pyrazine ring by only 23.59 (12)°. However, the carboxy groups are inclined to the pyrazine ring by 69.0 (3)°. In the crystal structure, the carboxy groups are linked to the DMSO molecules by O—H...O hydrogen bonds. In all three crystal structures, the presence of nonclassical hydrogen bonds gives rise to the formation of three‐dimensional supramolecular architectures.     

A tetrahedrally coordinated AgI and NiII complex with a two‐dimensional framework containing one‐dimensional helical chains

The title complex, poly[bis(μ₆‐pyridine‐2,6‐dicarboxylato N‐oxide)nickel(II)disilver(I)], [Ag₂Ni(C₇H₃NO₅)₂]_n or [Ag₂Ni(pydco)₂]_n (H₂pydco = pyridine‐2,6‐dicarboxylic acid N‐oxide), has a two‐dimensional sheet structure. The two carboxylate groups adopt two coordination modes. The Ni^II ion displays a distorted octahedral geometry, bonded to two carboxylate O atoms of two different pydco ligands and four O donors from another two ligands, i.e. two carboxylate O atoms and two N‐oxide O atoms. The Ag^I ion adopts a tetrahedral coordination, linked by three O atoms of three different carboxylate groups and an N‐oxide O atom.     

Synthesis of Cyclic Peptides by Photochemical Decarboxylation of N‐Phthaloyl Peptides in Aqueous Solution

The synthesis of a variety of cyclic peptides from N‐phthaloyl‐protected di‐, tri‐, tetra‐, and pentapeptides with different aminocarboxylic acid tethers by photodecarboxylation – initiated by intramolecular electron transfer – has been explored in aqueous media. The progress and the chemoselectivity of the follow‐up processes after CO₂ extrusion were traced by the respective pH/time‐profiles, as well as by the overall change in pH after completion of the reaction. The competition between cyclization and simple oxidative decarboxylation depends on spacer length and geometry, H‐bonding interaction between the electron accepting phthalimide C?O groups and amide H‐atoms, as well as the geometric reorganization coupled with the radical combination step and the formation of the lactam rings. With progressing reaction, hydrolysis of the phthalimide chromophore becomes an increasingly important side reaction due to the constant increase in pH. The use of phosphate‐buffered aqueous media consequently improved the cyclization yields. The ground‐state interactions between amide groups and the terminal COO^? group with the imide C?O groups were studied for the model system [N‐(phthaloyl)glycyl]sarcosine ( 1 ) by NMR spectroscopy where the amide (E/Z)‐equilibrium depends on the presence of carboxylate vs. free carboxylic acid, demonstrating the role of H‐bonding and metal coordination.     

A two‐dimensional cadmium(II) coordination polymer constructed from 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate and 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate ligands

Crystals of poly[[aqua[μ₃‐4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylato‐κ⁵O¹O^1′:N³,O⁴:O⁵][μ₄‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ⁷N³,O⁴:O⁴,O^4′:O¹,O^1′:O¹]cadmium(II)] monohydrate], {[Cd₂(C₁₅H₁₄N₂O₄)(C₁₆H₁₄N₂O₆)(H₂O)]·H₂O}_n or {[Cd₂(Hcpimda)(cpima)(H₂O)]·H₂O}_n, (I), were obtained from 1‐(4‐carboxybenzyl)‐2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃cpimda) and cadmium(II) chloride under hydrothermal conditions. The structure indicates that in‐situ decarboxylation of H₃cpimda occurred during the synthesis process. The asymmetric unit consists of two Cd²⁺ centres, one 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate (Hcpimda²⁻) anion, one 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate (cpima²⁻) anion, one coordinated water molecule and one lattice water molecule. One Cd²⁺ centre, i.e. Cd1, is hexacoordinated and displays a slightly distorted octahedral CdN₂O₄ geometry. The other Cd centre, i.e. Cd2, is coordinated by seven O atoms originating from one Hcpimda²⁻ ligand and three cpima²⁻ ligands. This Cd²⁺ centre can be described as having a distorted capped octahedral coordination geometry. Two carboxylate groups of the benzoate moieties of two cpima²⁻ ligands bridge between Cd2 centres to generate [Cd₂O₂] units, which are further linked by two cpima²⁻ ligands to produce one‐dimensional (1D) infinite chains based around large 26‐membered rings. Meanwhile, adjacent Cd1 centres are linked by Hcpimda²⁻ ligands to generate 1D zigzag chains. The two types of chains are linked through a μ₂‐η² bidentate bridging mode from an O atom of an imidazole carboxylate unit of cpima²⁻ to give a two‐dimensional (2D) coordination polymer. The simplified 2D net structure can be described as a 3,6‐coordinated net which has a (4³)₂(4⁶.6⁶.8³) topology. Furthermore, the FT–IR spectroscopic properties, photoluminescence properties, powder X‐ray diffraction (PXRD) pattern and thermogravimetric behaviour of the polymer have been investigated.     

A new linear bismuth coordination polymer based on 1,10‐phenanthroline‐2,9‐dicarboxylic acid: ionothermal synthesis,crystal structure and fluorescence properties

A new linear bismuth(III) coordination polymer, catena‐poly[[chloridobismuth(III)]‐μ₃‐1,10‐phenanthroline‐2,9‐dicarboxylato‐κ⁶O²:O²,N¹,N¹⁰,O⁹:O⁹], [Bi(C₁₄H₆N₂O₄)Cl]_n, has been obtained by an ionothermal method and characterized by elemental analysis, energy‐dispersive X‐ray spectroscopy, IR spectroscopy, thermal stability studies and single‐crystal X‐ray diffraction. The structure is constructed by Bi(C₁₄H₆N₂O₄)Cl fragments in which each Bi^III centre is seven‐coordinated by one Cl atom, four O atoms and two N atoms. The coordination geometry of the Bi^III cation is distorted pentagonal–bipyramidal (BiO₄N₂Cl), with one bridging carboxylate O atom and one Cl atom located in the axial positions. The Bi(C₁₄H₆N₂O₄)Cl fragments are further extended into a one‐dimensional linear polymeric structure via subsequent but different centres of symmetry (bridging carboxylate O atoms). Neighbouring linear chains are assembled via weak C—H...O and C—H...Cl hydrogen bonds, forming a three‐dimensional supramolecular architecture. Intermolecular π–π stacking interactions are observed, with centroid‐to‐centroid distances of 3.678 (4) Å, which further stabilize the structure. In addition, the solid‐state fluorescence properties of the title coordination polymer were investigated.     

An oxazol‐5(4H)‐one from benzyloxy­carbonyl‐(Aib)4‐OH

Benzyl N‐[8‐(4,4‐dimethyl‐5‐oxo‐4,5‐dihydrooxazol‐2‐yl)‐2,5,5,8‐tetra­methyl‐3,6‐dioxo‐4,7‐diazanon‐2‐yl]­carbamate, C₂₄H₃₄N₄O₆, an oxazol‐5(4H)‐one from N‐α‐benzyloxycarbonyl‐(Aib)₄‐OH (Aib = α‐amino­isobutyryl) represents the longest peptide oxazolone so far characterized by X‐ray diffraction. The overall geometry of the oxazolone ring compares well with literature data. The Aib(1) and Aib(2) residues are folded into a type III β‐bend, while the conformation adopted by Aib(3), preceding the oxazolone moiety, is semi‐extended. The disposition of the oxazolone ring relative to the preceding residue is stabilized by C—­H?N and C—H?O intramolecular interactions.