Application of multivariate optimization method in nanomolar simultaneous determination of morphine and codeine in the presence of uric acid using a glassy carbon electrode modified with a hydroxyapatite-Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticle/multiwalled carbon nanotubes composite

The electrochemical oxidation of morphine (MO) and codeine (COD) has been investigated by the application of a novel glassy carbon electrode modified with a hydroxyapatite-Fe₃O₄ nanoparticles/multiwalled carbon nanotubes composite (HA-FeNPs-MWCNTs/GCE). The modified electrode worked as an efficient sensor for simultaneous determination of MO and COD in the presence of uric acid. Response surface methodology was utilized to optimize the voltammetric response of the modified electrode for the determination of MO and COD. The amount of HA-FeNPs in the modifier matrix (%HA-FeNPs), the solution pH and the accumulation time were chosen as the three important operating factors through the experimental design methodology. The central composite design as a response surface approach was applied for obtaining the optimum conditions leading to maximum oxidation peak currents for MO and COD. The differential pulse voltammetry results showed that the obtained anodic peak currents were linearly proportional to concentration in the range of 0.08–32 µM with a detection limit (S/N = 3.0) of 14 nM for MO and in the range of 0.1–28 µM and with a detection limit of 22 nM for COD. The proposed method was successfully applied to determine these compounds in human urine and blood serum samples.     

Electrochemical sensor using graphene/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanosheets functionalized with garlic extract for the detection of lead ion

Based on the modulated electronic properties of Fe₃O₄-graphene (Fe₃O₄/GN composite) as well as the outstanding complexation between Pb²⁺ and natural substances garlic extract (GE), a novel electrochemical sensor for the determination of Pb²⁺ in wastewater was prepared by immobilization of Fe₃O₄/GN composite integrated with GE onto the surface of glassy carbon electrode (GCE). Fe₃O₄/GN composite was employed as an electrochemical active probe for enhancing electrical response by facilitating charge transfer while GE was used to improve the selectivity and sensitivity of the proposed sensor to Pb²⁺ assay. The electrochemical sensing performance toward Pb²⁺ was appraised by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and square wave voltammetry (SWV). Under the optimized condition, the sensor exhibited two dynamic linear ranges (LDR) including 0.001 to 0.5 nM and 0.5 to 1000 nM with excellent low detection limit (LOD) of 0.0123 pM (S/N =?3) and quantification limit (LOQ) of 0.41 pM (S/N =?10). Meanwhile, it displayed remarkable stability, reproducibility (RSD of 3.61%, n =?3), and selectivity toward the assay for the 100-fold higher concentration of other heavy metal ions. Furthermore, the novel sensor has been successfully employed to detect Pb²⁺ from real water samples with satisfactory results.     

Molecular mechanism of propane oxidative dehydrogenation on surface oxygen radical sites of VO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/TiO<Subscript>2</Subscript> catalysts

Minimum energy pathways of propane oxidative dehydrogenation to propene and propanol on supported vanadium oxide catalyst VO _x /TiO₂ were studied by periodic discrete Fourier transform (DFT) using a surface oxygen radical as the active site. The propene formation pathway was shown to consist of two consecutive hydrogen abstraction steps. The first step includes C_β–H bond activation of propane followed by the formation of a surface hydroxyl group V–O _t H and a propyl radical n-C₃H₇. This step with the activation energy E* = 0.56 eV (54.1 kJ/mol) appears to be rate-determining. The second step involves the reaction of the bridging O _b oxygen atom with the methylene C–H bond of propyl radical n-C₃H₇ followed by the formation of a hydroxylated surface site HO _t –V⁴⁺–O _b H and propene. The initial steps of the C–H bond activation during propane conversion to propanol and propene by ODH on V⁵⁺–(O _t O _b )^? active sites are identical. The obtained results demonstrate that participation of surface oxygen radicals as the active sites of propane ODH makes it possible to explain relatively low activation energies observed for this reaction on the most active catalysts. The presence of very active radical species in low concentration seems to be the key factor for obtaining high selectivity.     

Synthesis,structural, and electrochemical properties of NaCo(PO<Subscript>3</Subscript>)<Subscript>3</Subscript> cathode for sodium-ion batteries

A new Co-base sodium metaphosphate compound, NaCo(PO₃)₃, has been synthesized here by solid-state method. The crystal structure is refined by the Rietveld method, and the results reveal that NaCo(PO₃)₃ has an orthorhombic structure with the space group of P2 ₁ 2 ₁ 2 ₁ and lattice parameters of a = 14.2453(2) Å, b = 14.2306(1) Å, and c = 14.2603(2) Å. Its typical morphology and chemical composition are confirmed by scanning electron microscopy (SEM) and energy-dispersive spectrometry (EDS). The valence states of all elements and the internal/external vibrational modes of NaCoP₃O₉ compound are measured by X-ray photoelectron and vibrational spectrum, where a typical feature of the (PO₃)^? polyanion group is observed. Meanwhile, the electrochemical properties of NaCo(PO₃)₃ cathode for sodium-ion batteries are also elevated and an initial discharge capacity of 33.8 mAh/g can be obtained at 0.05 C within 1.5–4.2 V. After 20 cycles, a discharge capacity of 26.7 mAh/g can be obtained and a well-kept oxidation–reduction plateau is still observed for NaCo(PO₃)₃ cathode, indicating the good reversibility of this metaphosphate electrode.     

Direct electrochemistry and electrocatalysis of cytochrome <Emphasis Type="Italic">c</Emphasis> based on dandelion-like Bi<Subscript>2</Subscript>S<Subscript>3</Subscript> nanoflowers

The direct electrochemistry and electrocatalysis of cytochrome c (Cyt c) based on dandelion-like bismuth sulfide (d-Bi₂S₃) nanoflowers have been developed. The morphologies and composition of the d-Bi₂S₃ were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDS). Then, the electrochemical behaviors of Cyt c immobilized within the d-Bi₂S₃/chitosan film and its electrocatalytic ability toward hydrogen peroxide (H₂O₂) reduction were investigated by cyclic voltammetry. The electron transfer rate constant was estimated to be 13.1 s^?1, suggesting that a fast direct electron transfer was realized. The prepared Cyt c/d-Bi₂S₃/chitosan nanobiocomposite-modified electrode possessed excellent electrocatalytic ability toward H₂O₂ reduction that showed linearity in the range from 0.5 μM to 1.56 mM with a correlation coefficient of 0.9993. The detection limit was 0.2 μM on signal-to-noise ratio of 3. In addition, the d-Bi₂S₃ nanoflowers may be also applied to direct electron transfer of other redox proteins.     

Coordination Chemistry of the Magic Inorganic Building Block {Fe<Superscript>II</Superscript>[Mo<Subscript>6</Subscript>P<Subscript>4</Subscript>O<Subscript>31</Subscript>]<Subscript>2</Subscript>}: Hydrothermal Synthesis and Crystal Structure of a New Reduced Ferrous Molybdophosphate

A new reduced ferrous molybdophosphate composite solid of the formula, [(C₁₀H₁₄N₂)H]₄[Fe^II ₁₀Mo^V ₂₄(H₂PO₄)₄(HPO₄)₁₂(PO₄)₄(H₂O)₁₆(OH)₁₆O₄₄]·12H₂O, has been synthesized from a reaction mixture of MoO₃, FeSO₄·7H₂O, C₂H₂O₄·2H₂O, nicotine, H₃PO₄, and H₂O under hydrothermal conditions. The crystal data: monoclinic, space group C2/m, a = 24.4349(124), b = 12.9935(66), c = 14.7281(74) Å, β = 104.87(1) Å, V = 4520(4) Å³, Z = 2, R ₁  = 0.0874, wR ₂  = 0.2179. The structure is built from the building blocks of the formula, {Fe^II[Mo₆P₄O₃₁]₂}, consisting of a network of MO₆ (M = Fe, Mo) octahedral and PO₄ tetrahedral linked through their vertices. The connectivity of the building blocks with two pairs of face-sharing dinuclear Fe(II) clusters of the formula of [Fe^II ₂(H₂O)₄O₅] on which a phosphate group is hanging gives rise to one-dimensional chains with eight-membered apertures. The remarkable hydrogen bonded interactions between the chains form a unique and interesting framework with three-dimensional intersecting tunnels where the protonated nicotine molecules as structuring templates and crystallization water molecules are situated.     

Synthesis and characterization of a new monophosphate (C<Subscript>6</Subscript>H<Subscript>16</Subscript>N<Subscript>2</Subscript>)(H<Subscript>2</Subscript>PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Chemical preparation, crystal structure, and NMR spectroscopy of a new trans-2,5-dimethylpiperazinium monophosphate are given. This new compound crystallizes in the triclinic system, with the space group P-1 and the following parameters: a = 6.5033(3), b = 7.6942(4), c = 8.1473(5) Å, α = 114.997(3), β = 92.341(3), γ = 113.136(3), V = 329.14(3) ų, Z = 1, and D_x = 1.565 g cm^?3. The crystal structure has been determined and refined to R = 0.030 and R _w(F ²) = 0.032 using 1558 independent reflections. The structure can be described as infinite [H₂PO₄] _n ^n? chains with (C₆H₁₆N₂)²⁺ organic cations anchored between adjacent polyanions to form columns of anions and cations running along the b axis. This compound has also been investigated by IR, thermal, and solid-state, ¹³C and ³¹P MAS NMR spectroscopies and Ab initio calculations.     

Efficient and convenient oxidation of cyclohexene to adipic acid with H<Subscript>2</Subscript>O<Subscript>2</Subscript> catalyzed by H<Subscript>2</Subscript>WO<Subscript>4</Subscript> in acidic ionic liquids

A simple, efficient, and eco-friendly catalytic system for the oxidation of cyclohexene to adipic acid with H₂O₂ catalyzed by H₂WO₄ in Brønsted acidic ionic liquids under solvent-free conditions has been developed. Reaction conditions such as the catalysts, the types of anions and cations for Brønsted acidic ionic liquids, reaction temperature, and the amount of hydrogen peroxide, were investigated. Moreover, the Hammett acidity functions (H ₀) of Brønsted acidic ionic liquids were determined using UV–visible spectrophotometry. The optimum reaction condition identified was n(H₂WO₄):n(Brønsted acidic ionic liquids):n(cyclohexene):n(H₂O₂) = 0.02:0.02:1:4.4, and the yield of adipic acid was 96% under the reaction scale of 10 mmol. The catalytic system can be easily recovered and reused for four reaction runs without significant loss of catalytic activity. Simple operation of the catalyst system and avoidance of the emission of nitrous oxide are the benefits of this work.     

Hydrogen bonding and structural complexity in the Cu<Subscript>5</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>(OH)<Subscript>4</Subscript> polymorphs (pseudomalachite,ludjibaite, reichenbachite): combined experimental and theoretical study

Hydrogen bonding in the Cu₅(PO₄)₂(OH)₄ polymorphs pseudomalachite, ludjibaite and reichenbachite has been studied by low-temperature single-crystal X-ray diffraction (XRD; pseudomalachite) and solid-state density functional theory (DFT; pseudomalachite, ludjibaite, reichenbachite) calculations. Pseudomalachite at 100 K is monoclinic, P2₁/c, a = 4.4436(4), b = 5.7320(5), c = 16.9300(15) Å, β = 91.008(8)°, V = 431.15(7) ų and Z = 2. The structure has been refined to R ₁ = 0.025 for 1383 unique observed reflections with |F _o| ≥ 4σ_F. DFT calculations were done with the CRYSTAL14 software package. For pseudomalachite, the difference between the calculated and experimental H sites does not exceed 0.152 Å. Structural configurations around hydroxyl groups in all three polymorphs show many similarities. Each OH5 group is involved in a three-center (bifurcated) hydrogen bond with the H···A distances in the range of 2.141–2.460 Å and the D–H···A angles in the range of 122.41°–139.30°, whereas each OH6 group forms a four-center (trifurcated) bond (H···A = 2.093–2.593 Å; D–H···A = 122.79°–137.71°). The crystal structures of the Cu₅(PO₄)₂(OH)₄ polymorphs are based on three-dimensional frameworks of Cu and P polyhedra. The copper-centered octahedra share edges to form two-dimensional layers parallel to (100) in all three structures. The layers have square voids above and beneath PO₄ tetrahedra that link adjacent layers by sharing O atoms with two CuO₆ octahedra each. From the topological point of view, none of the polymorphs can be obtained from another by a displacive transformation, and therefore pseudomalachite, ludjibaite and reichenbachite can be viewed as combinatorial polymorphs. According to information-based structural complexity considerations, the three phases are very similar in their configurational entropies and preferential crystallization of one phase over another cannot be entropy driven and is probably governed by other mechanisms that may involve such factors as structures of prenucleation clusters, chemical admixtures, etc.     

Fabrication and characterisation of a mixed oxide-covered mesh electrode composed of NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript> and its capability of generating hydroxyl radicals during the oxygen evolution reaction in electrolyte-free water

A mixed oxide-covered mesh electrode composed of NiCo₂O₄ (MOME-NiCo₂O₄) was prepared on a stainless-steel substrate using thermal decomposition (slow-cooling rate method). Surface, bulk and electrochemical properties of MOME were studied using different techniques, namely scanning electron microscopy (SEM), X-ray diffraction (XRD), cyclic voltammetry (CV) with determination of the electrochemical porosity (?) and morphology factor (φ) parameters, quasi-stationary polarisation curves (PC) and electrochemical impedance spectroscopy (EIS). SEM images revealed a good coverage of the metallic wires by a compact oxide layer (absence of cracks). XRD analysis confirmed the formation of the spinel NiCo₂O₄ with the presence of NiO. The ‘in situ’ surface parameters denoted as ? and φ exhibited values of 0.39 and 0.33, respectively, revealing that the electrochemically active surface area is mainly confined to the ‘outer/external’ surface regions of the oxide layer. The PC was characterised by two Tafel slopes distributed in the low (b ₁ = 46 mV dec^?1) and high (b ₂ = 59 mV dec^?1) overpotential domains. The corresponding apparent exchange current densities were j ₀₍₁₎ = (3.43 ± 0.11) × 10^?6 A cm^?2 and j ₀₍₂₎ = (6.70 ± 0.08) × 10^?6 A cm^?2, respectively. The EIS study accomplished in the low-overpotential domain revealed a Tafel slope (b ₁) of 51 mV dec^?1. According to the spin-trapping reaction using N,N-dimethyl-p-nitrosoaniline (RNO), the MOME-NiCo₂O₄ electrode exhibited good performance for the generation of weakly adsorbed hydroxyl radicals (HO^?) during the OER in electrolyte-free water.     

<Emphasis Type="Italic">cis</Emphasis>-Dioxomolybdenum(VI) complexes of sterically encumbered phenol-based tetradentate N<Subscript>2</Subscript>O<Subscript>2</Subscript> ligands: Structural,spectroscopic, and electrochemical studies

Two cis-dioxomolybdenum(VI) complexes [MoO₂L] (L: L ¹, 2 and L: L ², 3) in a phenol-based sterically encumbered N₂O₂ ligand environment have been synthesized, and their crystallographic characterizations are reported. The orange crystals of 2 are monoclinic, space group P2₁/a with unit cell dimensions as a=16.2407(17) Å, b=7.2857(8) Å, c=18.400(2) Å, β=98.002(9)°, Z=4, and d _cal=1.486 g cm^?3. The light orange crystals of 3, however, are orthorhombic, space group, Pbcn, with unit cell dimensions a=8.3110(12) Å, b=12.637(3) Å, c=34.673(5) Å, Z=4, and d _cal=1.187 g cm^?3. The structures were refined by a full-matrix least-squares procedure on F ² to a final R=0.046 (0.055 for 3) using 4944 (3677) all independent data. In both the cases, the Mo atom exists in a distorted octahedral geometry defined by a N₂O₄ donor set, which features a cis-Mo(–O)₂ and a trans-Mo(OPh)₂ arrangement. Compound 2 undergoes a quasireversible one-electron reduction at ?1.3 V vs Ag/AgCl reference due to Mo^VIO₂/Mo^VO₂ electron transfer and thus providing a rare example of steric solution to the comproportionation–dimerization problem encountered frequently in the development of valid biomimetic models for the active sites of oxomolybdenum enzymes.     

Carbon ceramic electrodes modified with mixed oxides SiO<Subscript>2</Subscript>/SnO<Subscript>2</Subscript> for determination of levofloxacin

The preparation of a carbon ceramic electrode modified with SnO₂ (CCE/SnO₂) using tin dibutyl diacetate as precursor was optimized by a 2³ factorial design. The factors analyzed were catalyst (HCl), graphite/organic precursor ratio, and inorganic precursor (dibutyltin diacetate). The statistical treatment of the data showed that only the second-order interaction effect, catalyst × inorganic precursor, was significant at 95% confidence level, for the electrochemical response of the system. The obtained material was characterized by scanning electron microscopy (MEV), X-ray diffraction (XRD), RAMAN spectroscopy, XPS spectra, and voltammetric techniques. From the XPS spectra, it was confirmed the formation of the Si–O–Sn bond by the shift in the binding energy values referred to Sn 3d3/2 due to the interaction of Sn with SiOH species. The incorporation of SnO₂ provided an increment of the electrode response for levofloxacin, with Ipa = 147.0 μA for the ECC and Ipa = 228.8 μA for ECC/SnO₂, indicating that SnO₂ when incorporated into the silica network enhances the electron transfer process. Under the optimized working conditions, the peak current increased linearly with the levofloxacin concentration in the range from 6.21×10^?5 to 6.97×10^?4 mol L^?1 with quantification and detection limits of 3.80×10^?5 mol L^?1 (14.07 mg L^?1) and 1.13×10^?5 mol L^?1 (4.18 mg L^?1), respectively.     

Graphene oxide/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@polythionine nanocomposite as an efficient sorbent for magnetic solid-phase extraction followed by high-performance liquid chromatography for the determination of duloxetine in human plasma

Herein, an efficient graphene oxide/Fe₃O₄@polythionine (GO/Fe₃O₄/PTh) nanocomposite sorbent was introduced for magnetic solid-phase extraction combined with high-performance liquid chromatography–ultraviolet detection of duloxetine (DLX) in human plasma. To prepare the sorbent, an oxidative polymerization of thionine on the surface of magnetic GO was utilized while PTh was simply used as a surface modifier to improve extraction efficiency. Transmission electron microscopy, scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray analysis, vibrating sample magnetometry, Fourier transform-infrared spectroscopy and Brunauer–Emmett–Teller technique were applied to characterize the prepared nanoparticles. Firstly, effective parameters controlling the performance of the extraction process were evaluated in detail and optimized. Under the optimized conditions, calibration curve showed linearity in the range of 2–2500 ng mL^?1 with regression coefficient corresponding to 0.998. Limits of detection (LOD, S/N = 3) and quantification (LOQ, S/N = 10) were 0.5 and 2 ng mL^?1, respectively. Reasonable intra-assay (3.5–4.5%, n = 6) and inter-assay (3.8–6.7%, n = 9) precision represented acceptable performance of the procedure. The applicability of the method was successfully extended to the determination of DLX in human plasma after oral administration of 60 mg single dose of the drug and finally some pharmacokinetic data was achieved.     

Sn-doped Li<Subscript>1.2</Subscript>Mn<Subscript>0.54</Subscript>Ni<Subscript>0.13</Subscript>Co<Subscript>0.13</Subscript>O<Subscript>2</Subscript> cathode materials for lithium-ion batteries with enhanced electrochemical performance

Sn-doped Li-rich layered oxides of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ have been synthesized via a sol-gel method, and their microstructure and electrochemical performance have been studied. The addition of Sn⁴⁺ ions has no distinct influence on the crystal structure of the materials. After doped with an appropriate amount of Sn⁴⁺, the electrochemical performance of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ cathode materials is significantly enhanced. The optimal electrochemical performance is obtained at x = 0.01. The Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode delivers a high initial discharge capacity of 268.9 mAh g^?1 with an initial coulombic efficiency of 76.5% and a reversible capacity of 199.8 mAh g^?1 at 0.1 C with capacity retention of 75.2% after 100 cycles. In addition, the Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode exhibits the superior rate capability with discharge capacities of 239.8, 198.6, 164.4, 133.4, and 88.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively, which are much higher than those of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ (196.2, 153.5, 117.5, 92.7, and 43.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively). The substitution of Sn⁴⁺ for Mn⁴⁺ enlarges the Li⁺ diffusion channels due to its larger ionic radius compared to Mn⁴⁺ and enhances the structural stability of Li-rich oxides, leading to the improved electrochemical performance in the Sn-doped Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode materials.     

Chemical looping combustion characteristics of coal with Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> oxygen carrier

Chemical looping combustion (CLC) by direct use of coal as fuel is promising with its prominent advantages, but insufficient conversion of coal in the CLC system is a great limitation. In this research, in order to explore the limiting factor inherent for coal conversion in the CLC system, from the perspective of chemical structure of coal, reaction of a selected Chinese typical coal (designated as LZ) with Fe₂O₃ was systematically investigated. Thermogravimetric investigation of LZ coal reaction with Fe₂O₃ at the oxygen excess number Φ = 1.0 indicated that after dehydration, there existed three discernible reaction stages as observed, which were attributed to the combined reactions of Fe₂O₃ with the primary and secondary gaseous products evolved from LZ coal. Meanwhile, the Fe₂O₃ provided should be controlled around Φ = 1.0 aiming at effective conversion of LZ coal and simultaneous proper utilization of Fe₂O₃. And then, both gaseous Fourier transform infrared spectroscopy and energy-dispersive X-ray spectroscopy analysis of the gaseous and solid products formed from reaction of LZ coal with Fe₂O₃ at Φ = 1.0 indicated that full conversion of LZ coal was not reached with a little unconverted CO occurring, though partial Fe₂O₃ was over reduced to lower valence of oxides than Fe₃O₄. Furthermore, in order to explore the insufficient conversion of LZ coal at the molecular scale, X-ray photoelectron spectroscopy analysis revealed the distribution and evolution of the carbon functional groups involved in LZ coal after its reaction with Fe₂O₃ and further found that effective conversion of the aromatic/aliphatic C=C/C–H groups in LZ coal was the rate-limited step at the molecular scale with the relative content of these groups still dominated around 59% after LZ coal reaction with Fe₂O₃. Finally, solid IR (infrared) analysis and quantitative evaluation of the solid products of LZ coal reaction with Fe₂O₃ indicated that the length of aliphatic C–H groups decreased due to its partial disintegration, while the aromatization of the residual char was aggravated with the higher relative IR intensity ratio of the aromatic C=C groups, which reduced the reactivity of LZ residual char and hindered the full conversion of LZ coal.     

Thermal properties,phase transitions,vibrational and reorientational dynamics of [Mn(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

[Mn(NH₃)₆](NO₃)₂ crystallizes in the cubic, fluorite (C1) type crystal lattice structure (Fm \( \overline{3} \) m) with a = 11.0056 Å and Z = 4. Two phase transitions of the first-order type were detected. The first registered on DSC curves as a large anomaly at T _C1 ^h  = 207.8 K and T _C1 ^c  = 207.2 K, and the second registered as a smaller anomaly at T _C2 ^h  = 184.4 K and T _C2 ^c  = 160.8 K (where the upper indexes h and c denote heating and cooling of the sample, respectively). The temperature dependence of the full width at half maximum of the band associated with the δ_s(HNH)F_1u mode suggests that the NH₃ ligands in the high temperature and intermediate phase reorientate quickly with correlation times in the order of several picoseconds and with activation energy of 9.9 kJ mol^?1. In the phase transition at T _C2 ^c probably only a some of the NH₃ ligands stop their reorientation, while the remainders continue to reorientate quickly with activation energy of 7.7 kJ mol^?1. Thermal decomposition of the investigated compound starts at 305 K and continues up to 525 K in four main stages (I–IV). In stage I, ²/₆ of all NH₃ ligands were seceded. Stages II and III are connected with an abruption of the next ²/₆ and ¹/₆ of total NH₃, respectively, and [Mn(NH₃)](NO₃)₂ is formed. The last molecule of NH₃ per formula unit is freed at stage IV together with the simultaneous thermal decomposition of the resulting Mn(NO₃)₂ leading to the formation of gaseous products (O₂, H₂O, N₂ and nitrogen oxides) and solid MnO₂.     

Effect of solvents on the morphology of NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript>/graphene nanostructures for electrochemical pseudocapacitor application

The large internal surface areas and outstanding electrical and mechanical properties of graphene have prompted to blend graphene with NiCo₂O₄ to fabricate nanostructured NiCo₂O₄/graphene composites for supercapacitor applications. The use of graphene as blending with NiCo₂O₄ enhances the specific capacitance and rate capability and improves the cyclic performance when compared to the pristine NiCo₂O₄ material. Here, we synthesized two different nanostructured morphologies of NiCo₂O₄ on graphene sheets by solvothermal method. It has been suggested that the morphologies of oxides are greatly influenced by dielectric constant, thermal conductivity, and viscosity of solvents employed during the synthesis. In order to test this concept, we have synthesized nanostructured NiCo₂O₄ on graphene sheets by facile solvothermal method using N-methyl pyrrolidone and N,N-dimethylformamide solvents with water. We find that mixture of N-methyl pyrrolidone and water solvent favored the formation of nanonet-like NiCo₂O₄/graphene (NiCoO-net) whereas mixture of N,N-dimethylformamide and water solvent produced microsphere-like NiCo₂O₄/graphene (NiCoO-sphere). Electrochemical pseudocapacitance behavior of the two NiCo₂O₄/graphene electrode materials was studied by cyclic voltammetry, chronopotentiometry, and electrochemical impedance spectroscopy techniques. The supercapacitance measurements on NiCoO-net and NiCoO-sphere electrodes showed specific capacitance values of 1060 and 855 F g^?1, respectively, at the current density of 1.5 A g^?1. The capacitance retention of NiCoO-net electrode is 93 % while that of NiCoO-sphere electrode is 77 % after long-term 5000 charge-discharge cycles at high current density of 10 A g^?1.     

Crystal structures of Ti(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript> and Sn(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript>

The characteristics of crystal structures of the titanium(IV) diammonium (Ti(NH₄)₂P₄O₁₃) and tin(IV) diammonium (Sn(NH₄)₂P₄O₁₃) tetraphosphates, which are isostructural with similar silicon(IV) and germanium(IV) salts, have been obtained by the Rietveld method using X-ray powder diffraction data. The compounds crystallize in the triclinic system, space group P \(\overline 1 \), Z = 2, a = 15.0291(7) Å, b = 7.9236(4) Å, c = 5.0754(3) Å, α = 99.168(3)°, β = 97.059(3)°, γ = 83.459(3)° for Ti(NH₄)₂P₄O₁₃ and a = 15.1454(7) Å, b = 8.0103(5) Å, c = 5.1053(3) Å, α = 99.898(6)°, β = 96.806(3)°, γ = 83.881(4)° for Sn(NH₄)₂P₄O₁₃. The structure is refined in the isotropic approximation using the pseudo-Voigt function: R _p = 0.077, R _Bragg = 0.045, R _F = 0.057 for Ti(NH₄)₂P₄O₁₃; R _p = 0.082, R _Bragg = 0.044, R _F = 0.046 for Sn(NH₄)₂P₄O₁₃. The hydrogen atoms of the ammonium cations are placed in the calculated positions. A comparative analysis of the structures of the compounds of the M^IV(NH₄)₂P₄O₁₃ (M^IV = Si, Ge, Ti, Sn) series has been carried out.     

Amperometric hydrogen peroxide sensor based on the use of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> hollow nanostructures

The authors report on the preparation of a hollow-structured cobalt ferrite (CoFe₂O₄) nanocomposite for use in a non-enzymatic sensor for hydrogen peroxide (H₂O₂). Silica (SiO₂) nanoparticles were exploited as template for the deposition of Fe₃O₄/CoFe₂O₄ nanosheets, which was followed by the removal of SiO₂ template under mild conditions. This leads to the formation of hollow-structured Fe₃O₄/CoFe₂O₄ interconnected nanosheets with cubic spinel structure of high crystallinity. The material was placed on a glassy carbon electrode where it acts as a viable sensor for non-enzymatic determination of H₂O₂. Operated at a potential of ?0.45 V vs. Ag/AgCl in 0.1 M NaOH solution, the modified GCE has a sensitivity of 17 nA μM^?1 cm^?2, a linear response in the range of 10 to 1200 μM H₂O₂ concentration range, and a 2.5 μM detection limit. The sensor is reproducible and stable and was applied to the analysis of spiked urine samples, where it provided excellent recoveries.

Open image in new window

Graphical abstract Schematic of a cobalt ferrite (CoFe₂O₄) hollow structure for use in electrochemical determination of H₂O₂. The sensor shows a low detection limit, a wide linear range, and excellent selectivity for H₂O₂.

     

Non-enzymatic sensing of hydrogen peroxide using a glassy carbon electrode modified with the layered MoS<Subscript>2</Subscript>-reduced graphene oxide and Prussian Blue

The authors describe an electrochemical sensor for hydrogen peroxide (H₂O₂). It was constructed by consecutive, selective modification of a glassy carbon electrode (GCE) with Prussian Blue (PB), layered molybdenum disulfide (MoS₂), and reduced graphene oxide (rGO). The properties of the modified GCE were characterized via high-resolution transmission electron microscopy, UV-vis spectroscopy and X-ray diffraction. The electrochemical properties of the electrode were studied using cyclic voltammetry and electrochemical impedance spectroscopy. The sensor exhibits excellent electrocatalytic activity for the reduction of hydrogen peroxide in comparison to GCEs modified with MoS₂-rGO or PB only. Response is linear in the 0.3 μM to 1.15 mM H₂O₂ concentration range at a working analytical voltage of 0.1 V, with a 0.14 μM detection limit. The electrochemical sensitivity is 2883.5 μA·μM^?1·cm^?2, and response is fast (<10 s). The sensor is selective, stable and reproducible. This is attributed to the efficient electron transport properties of the MoS₂-rGO composite and the high loading with PB.

Open image in new window

Graphic abstract Prussian Blue nanoparticles were deposited on MoS₂-rGO modified glassy carbon electrode by electrochemical method. This sensor was used for the detection of H₂O₂ in tap water and river water.