Formation of Columnar Liquid Crystals on the Basis of Unconventional Triazine‐Based Dendrimers by the C3‐Symmetric Approach

Two series of unconventional triazine‐based dendrimers with C₂ symmetry and C₃ symmetry were prepared. The newly prepared C₃‐symmetrical dendrimers were characterized by ¹H and ¹³C NMR spectroscopy, mass spectrometry, and elemental analysis. Differential scanning calorimetry, polarizing microscopy, and powder XRD showed that the C₃‐symmetrical dendrimers display columnar liquid‐crystalline phases during thermal treatment, but the C₂‐symmetrical dendrimers were not observed to behave correspondingly. The molecular conformations of C₃‐ and C₂‐symmetrical dendrimers were obtained by computer simulation with the MM2 model of the CaChe program in the gas phase. The simulation results reasonably explain the different mesogenicities of C₃‐ and C₂‐symmetric dendrimers. This new strategy should be applicable to other types of unconventional dendrimers with rigid frameworks for displaying columnar liquid‐crystalline behavior.     

Formation of columnar liquid crystals on the basis of unconventional triazine-based dendrimers by the C3-symmetric approach

Two series of unconventional triazine-based dendrimers with C(2) symmetry and C(3) symmetry were prepared. The newly prepared C(3)-symmetrical dendrimers were characterized by (1)H and (13)C NMR spectroscopy, mass spectrometry, and elemental analysis. Differential scanning calorimetry, polarizing microscopy, and powder XRD showed that the C(3)-symmetrical dendrimers display columnar liquid-crystalline phases during thermal treatment, but the C(2)-symmetrical dendrimers were not observed to behave correspondingly. The molecular conformations of C(3)- and C(2)-symmetrical dendrimers were obtained by computer simulation with the MM2 model of the CaChe program in the gas phase. The simulation results reasonably explain the different mesogenicities of C(3)- and C(2)-symmetric dendrimers. This new strategy should be applicable to other types of unconventional dendrimers with rigid frameworks for displaying columnar liquid-crystalline behavior.     

A Small Change in Central Linker Has a Profound Effect in Inducing Columnar Phases of Triazine‐Based Unconventional Dendrimers

Four unconventional triazine‐based dendrimers have been prepared and characterized by ¹H and ¹³C NMR spectroscopies, mass spectrometry, and elemental analysis. Based on DSC studies, polarizing microscopy, and powder XRD, two of these dendrimers, containing linkers with an odd number of carbon atoms, were observed to display columnar liquid–crystalline phases during thermal treatment. However, the other two dendritic analogues, containing linkers with an even number of carbon atoms, were not observed to behave correspondingly. Based on computer simulation, we reasonably assume that the dendrimers with an odd number of carbon atoms in their linkers distort their molecular shape and adopt two isomeric structures due to asymmetrical congestion. This reduces the molecular π–π face‐to‐face interaction, which in turn causes the dendrimers to form columnar LC phases during thermal treatment. However, the dendrimers with an even number of carbon atoms in their linkers have more symmetrical skeletons and do not display any liquid–crystalline phase upon thermal treatment. This new strategy should be applicable for eliciting the columnar liquid–crystalline properties of other types of unconventional dendrimers with rigid frameworks.     

Lyotropic Supramolecular Helical Columnar Phases Formed by C3‐Symmetric and Unsymmetric Rigid Molecules

Unlike thermotropic liquid‐crystalline C₃‐symmetric molecules with flexible chains, the herein‐designed fully rigid three‐armed molecules (C₃‐symmetric and unsymmetric) create a fancy architecture for the formation of lyotropic liquid crystals in water. First, hollow columns with triple‐stranded helices, analogous to helical rosette nanotubes, are spontaneously constructed by self‐organization of the rigid three‐armed molecules. Then, the helical nanotubes arrange into hexagonal liquid‐crystalline phases, which show macroscopic chirality as a result of supramolecular chiral symmetry breaking. Interestingly, the helical nanotubes constructed by the fully rigid molecules are robust and stable over a wide concentration range in water. They are hardly affected by ionic defects at the molecular periphery, that is, further decoration of functional groups on the molecular arms can presumably be realized without changing the helical conformation. In addition, the formed columnar phases can be aligned macroscopically by simple shear and show anisotropic ionic conductivity, which suggests promising applications for low‐dimensional ion‐conductive materials.     

A Conformational Study on Silacyclohexane. Comparison of ab initio (HF,MP2), DFT,and Molecular Mechanics Calculations. Conformational Energy Surface of Silacyclohexane

The structures and relative energies for the basic conformations of silacyclohexane 1 have been calculated using HF, RI‐MP2, RI‐DFT and MM3 methods. All methods predict the chair form to be the dominant conformation and all of them predict structures which are in good agreement with experimental data. The conformational energy surface of 1 has been calculated using MM3. It is found that there are two symmetric lowest energy pathways for the chair‐to‐chair inversion. Each of them consists of two sofa‐like transition states, two twist forms with C₁ symmetry (twist‐C₁), two boat forms with Si in a gunnel position (C₁ symmetry), and one twist form with C₂ symmetry (twist‐C₂). All methods calculate the relative energy to increase in the order chair < twist‐C₂ < twist‐C₁ < boat. At the MP2 level of theory and using TZVP and TZVPP (Si atoms) basis sets the relative energies are calculated to be 3.76, 4.80, and 5.47 kcal mol^–1 for the twist‐C₂, twist‐C₁, and boat conformations, respectively. The energy barrier from the chair to the twisted conformations of 1 is found to be 6.6 and 5.7 kcal mol^–1 from MM3 and RI‐DFT calculations, respectively. The boat form with Si at the prow (C_s symmetry) does not correspond to a local minimum nor a saddle point on the MM3 energy surface, whereas a RI‐DFT optimization under C_s symmetry constraint resulted in a local minimum. In both cases its energy is above that of the chair‐to‐twist‐C₁ transition state, however, and it is clearly not a part of the chair‐to‐chair inversion.     

Designing liquid-crystalline dendronised hexa-adducts of [60]fullerene via click chemistry

ABSTRACT

Liquid-crystalline [60]fullerodendrimers were constructed via click chemistry based on the reaction between hexa-adducts of [60]fullerene (C₆₀) bearing 12 azide groups and alkyne-terminated cyanobiphenyl dendrons of first- and second-generation. The structure of all the new compounds was confirmed by IR, UV, ¹H and ¹³C NMR spectroscopies and mass spectrometry. The mesomorphic properties were studied by polarised optical microscopy, differential scanning calorimetry and small-angle X-ray scattering. The hexa-adduct of C₆₀ functionalised with the first-generation dendrons gave rise to the formation of a smectic A phase and a rectangular columnar phase (c2mm symmetry) while the hexa-adduct of C₆₀ decorated with the second-generation dendrons displayed only a rectangular columnar phase (c2mm symmetry). Our results show that the hexa-adduct of C₆₀ is a unique synthetic platform for the design of fullerodendrimers and dendronised materials.     

Preparation of Unconventional Dendrimers that Contain Rigid NH?Triazine Linkages and Peripheral tert‐Butyl Moieties for CO2‐Selective Adsorption

Three unconventional dendrimers that contained rigid NH? triazine linkages and peripheral tert‐butyl moieties were prepared by using a convergent approach and characterized by ¹H and ¹³C NMR spectroscopy, mass spectrometry, and elemental analysis. Based on a thermogravimetric analysis study, these dendrimers were observed to display thermal stability at about 300 °C. The NH? triazine moiety, which possessed protonated and proton‐free nitrogen sites (like the imidazole unit), displayed the capture of polarizable CO₂ molecules through hydrogen‐bond and/or dipole–quadrupole interactions. In addition, the adsorption of various amounts of CO₂ and N₂ at different pressures suggests that the dendritic pores, which arise from the stacking of the middle co‐planar and rim protuberant dendrimers, G _n ‐N～N‐G _n (n=1–3), either swell or shrink at high pressure, thus indicating that these dendrimers may have a breathing ability.     

Hydrogen Bonding Directed Supramolecular Polymerisation of Oligo(Phenylene‐Ethynylene)s: Cooperative Mechanism,Core Symmetry Effect and Chiral Amplification

The design of supramolecular motifs with tuneable stability and adjustable supramolecular polymerisation mechanisms is of crucial importance to precisely control the properties of supramolecular assemblies. This report focuses on constructing π‐conjugated oligo(phenylene ethynylene) (OPE)‐based one‐dimensional helical supramolecular polymers that show a cooperative growth mechanism. Thus, a novel set of discotic molecules comprising a rigid OPE core, three amide groups, and peripheral solubilising wedge groups featuring C₃ and C₂ core symmetry was designed and synthesised. All of the discotic molecules are crystalline compounds and lack a columnar mesophase in the solid state. In dilute methylcyclohexane solution, one‐dimensional supramolecular polymers are formed stabilised by threefold intermolecular hydrogen bonding and π–π interactions, as evidenced by ¹H NMR measurements. Small‐angle X‐ray and light scattering measurements reveal significant size differences between the columnar aggregates of C₃‐ and C₂‐symmetrical discotics, that is, the core symmetry strongly influences the nature of the supramolecular polymerisation process. Temperature‐dependent CD measurements show a highly cooperative polymerisation process for the C₃‐symmetrical discotics. In contrast, the self‐assembly of C₂‐symmetrical discotics shows a smaller enthalpy release upon aggregation and decreased cooperativity. In all cases, the peripheral stereogenic centres induce a preferred handedness in the columnar helical aggregates. Moreover, one stereogenic centre suffices to fully bias the helicity in the C₂‐symmetrical discotics. Finally, chiral amplification studies with the C₃‐symmetrical discotics were performed by mixing chiral and achiral discotics (sergeants‐and‐soldiers experiment) and discotics of opposite chirality (majority‐rules experiment). The results demonstrate a very strong sergeants‐and‐soldiers effect and a rather weak majority‐rules effect.     

High‐pressure synthesis and crystal structure of the strontium tungstate Sr3W2O9

The strontium tungstate compound Sr₃W₂O₉ was prepared by a high‐pressure synthesis technique. The crystal structure was determined by single‐crystal X‐ray diffraction and transmission electron microscopy. The structure was found to be a hettotype structure of the high‐pressure phase of Ba₃W₂O₉, which has corner‐sharing octahedra with a trigonal symmetry. Sr₃W₂O₉ has a monoclinic unit cell of C2/c symmetry. One characteristic of the structure is the breaking of the threefold rotation symmetry existing in the high‐pressure phase of Ba₃W₂O₉. The substitution of Sr at the Ba site results in a significant shortening of the interlayer distances of the [AO₃] layers (A = Ba, Sr) and causes a distortion in the crystal structure. In Sr₃W₂O₉, there is an off‐centre displacement of W⁶⁺ ions in the WO₆ octahedra. Such a displacement is also observed in the high‐pressure phase of Ba₃W₂O₉.     

Self‐assembly and lower critical solution temperature properties of supramolecular block copolymer/ionic liquid complexes depending on the alkyl chain length of imidazolium rings

We report the liquid crystalline (LC) assembly and lower critical solution temperature (LCST) properties of wedge‐shaped block copolymer (BCP)/1‐alkyl‐3‐methylimidazolium tetrafluoroborate ([C_nMIM][BF₄], n = 2, 4, 6) complexes ( 1 – 3 ) depending on the alkyl chain length of the ionic liquids (ILs). In contrast to the crystalline BCP, all of the ionic samples showed LC phases. 1 with [C₂MIM][BF₄] exhibited a hexagonal columnar phase, and 3 with [C₆MIM][BF₄] exhibited a gyroid phase. Interestingly, a temperature‐dependent transformation from columnar phase to gyroid phase was revealed for 2 with [C₄MIM][BF₄]. The phase difference may be explained by the supramolecular shape change that was dependent on the alkyl chain length of the ILs. The LCST behavior was characterized using the differential scanning calorimetry, turbidity observations, and the X‐ray diffraction techniques. Notably, the primary d‐spacing began to decrease at the clouding temperature (T_c). 3 showed the highest T_c at 130 °C, which is greater than the temperature of the order‐to‐disorder transition. The results demonstrate that the subtle variation in the IL structure affects the morphological and LCST properties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3587–3596     

The molecular conformation of pentan‐3‐one studied in cholic acid pentan‐3‐one solvate

The crystal structure of cholic acid–pentan‐3‐one (1/1), C₅H₁₀O·C₂₄H₄₀O₅, has been determined in order to deduce the molecular conformation of the small volatile ketone. Data were collected at 100 K to a resolution of (sin θ)/λ = 0.91 Å⁻¹. The structure contains a hydrogen‐bonded cholic acid host network, forming only van der Waals interactions with the guest pentan‐3‐one molecules. The ketone molecules are disordered on general positions, with two clearly identifiable conformations. The majority conformer exhibits approximate C₂ symmetry and is similar to that recently observed by microwave spectroscopy in the gas phase.     

含氨基酸和多肽的树枝状化合物的合成与分子动力学模拟研究

合成了一系列以氨基酸和多肽为外周功能基团的醚-酰胺型树枝状化合物, 化合物结构经NMR, ESI-MS确证. 并对该系列化合物在水溶液中的状态进行了分子动力学模拟. 结果显示: 化合物的构象与原子数相关, 随原子数的增加有逐渐接近球形的趋势; 氨基酸α碳原子径向分布显示, 随着外周功能基团的增大, 分子可能存在部分卷曲构象.     

Dynamics of Aromatic Molecules Clathrated in Crystalline Syndiotactic Polystyrene: A Solid State 2H NMR Investigation of the Host/Guest Complexes

Syndiotactic polystyrene clathrates hosting benzene‐d₆ or toluene‐d₈ molecules in the cavities of the δ crystalline form have been prepared and investigated by means of solid state ²H NMR spectroscopy. Benzene‐d₆ molecules were found to be involved in a fast rotation about the C₆ symmetry axis whereas the toluene‐d₈ molecules exhibit a fast rotation of the methyl group about the symmetry axis passing through the C₁ and C₄ carbon atoms.     

Two phases of bis­(tetraethyl­ammonium) di‐μ‐chloro‐bis­[di­chloro­palladium(II)]

A phase transition was found to occur at ∼153 K in the title compound, (C₈H₂₀N)₂[PdCl₆]. The structures of the two phases are reported at 292 and 130 K. The low‐temperature phase is twinned. The phase transition is accompanied by a minor displacement of the ions. There are C—H⋯Cl interactions as short as ∼2.80 Å, indicating the existence of hydrogen bonds, and this was confirmed by vibrational spectroscopy. The [Pd₂Cl₆]²⁻ anion occupies sites of mmm and 2/m symmetry in the room‐temperature and low‐temperature phases, respectively.     

Thermal and optical behaviour of octa-alkoxy substituted phthalocyaninatovanadyl complexes

This paper deals with the synthesis of vanadyl phthalocyanines substituted with eight alkoxy chains in the peripheral (2, 3, 9, 10, 16, 17, 23, 24) positions. The alkoxy chain length was varied, and octa-octyloxy (C₈H₁₇O), octa-dodecyloxy (C₁₂H₂₅O) and octa-hexadecyloxy (C₁₆H₃₃O) substituted vanadyl phthalocyanine complexes were prepared. Studies by polarizing optical microscopy and small angle X-ray diffraction (XRD) revealed that all the complexes are liquid crystalline and that these metallomesogens exhibit a columnar phase. The symmetry of the 2D lattice is rectangular, with a ^c 2 ^mm space group, as determined by the indexation of the XRD reflections; hence a rectangular columnar phase (Col_r) was assigned. A double periodicity, although weak, along the axis of the columns was found, which indicates some degree of pairing or dimerization. A tentative explanation based on an antiferroelectric stacking is given. Transition enthalpies were determined by differential scanning calorimetry. The compounds start to decompose above 250°C before reaching the clearing temperatures. A significant bathochromic shift of the Q-band in the UV/Vis spectra of the vanadyl complexes compared with the metal-free ligands and other metallophthalocyanines (M=Co^II, Ni^II, Cu^II, Zn^II) was also observed.     

Influence of fluorinated substituent and terminal length on phase behavior of mesogen‐jacketed liquid crystalline polymers with a biphenyl mesogen

A series of mesogen‐jacketed liquid crystalline polymers, poly{2,2,3,3,4,4,4‐heptafluorobutyl 4′‐hydroxy‐2‐vinylbiphenyl‐4‐carboxylate} (PF3Cm, where m is the number of carbon atoms in the alkoxy groups, and m = 1, 4, 6, and 8), the side chain of which contains a biphenyl core with a fluorocarbon substituent at one end and an alkoxy unit of varying length on the other end, were designed and successfully synthesized via atom transfer radical polymerization. For comparison, poly{butyl 4′‐hydroxy‐2‐vinylbiphenyl‐4‐carboxylate} (PC4Cm), similar to PF3Cm but with a butyl group instead of the fluorocarbon substituent, was also prepared. Differential scanning calorimetric results reveal that the glass transition temperatures (T_gs) of the two series of polymers decrease as m increases and T_gs of the fluorocarbon‐substituted polymers are higher than those of the corresponding butyl‐substituted polymers. Wide‐angle X‐ray diffraction measurements show that the mesophase structures of these polymers are dependent on the number of the carbon atoms in the fluorocarbon substituent and the property of the other terminal substituent. Polymers with fluorocarbon substituents enter into columnar nematic phases when m ≥ 4, whereas the polymer PF3C1 exhibits no liquid crystallinity. For polymers with butyl substituents, columnar nematic phases form when the number of carbon atoms at both ends of the side chain is not equal at high temperatures and disappear after the polymers are cooled to ambient temperature. However, when the polymer has the same number of carbon atoms at both ends of the side chain, a hexagonal columnar phase develops, and this phase remains after the polymer is cooled. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Unsymmetry effect of hexa-peri-hexabenzocoronenes on columnar mesophase behaviour

To address the effects of molecular symmetry on the phase of columnar liquid crystals, a series of unsymmetry (C₁) and symmetry (D_3h) hexa-peri-hexabenzocoronene derivatives was prepared. Compounds 3 and 4, as well as a mixture of compounds 3+4, all had a significantly lower melting temperature and clearing temperature than high-symmetry compounds (D_6h), and all results show a strong dependence on molecular symmetry.     

Corannulene Molecular Rotor with Flexible Perfluorobenzyl Blades: Synthesis,Structure and Properties

Two members of a new class of organic‐acceptor perfluorobenzyl corannulenes were prepared by gas‐phase and highly‐selective solution‐phase reactions at elevated temperatures. The peculiar single‐crystal X‐ray structure of C₅‐C₂₀H₅(CF₂C₆F₅)₅ revealed two high‐energy conformers with drastically different bowl depths and orientations of perfluorobenzyl blades; the conformers are alternating in columnar packing arrangements and every pair is sandwiched by toluene molecules.     

s‐Triazine‐Based Functional Discotic Liquid Crystals: Synthesis,Mesomorphism and Photoluminescence

A new series of C₃‐symmetric, π‐conjugated molecules was designed, synthesized and characterized. The materials were derived from electron‐accepting s‐triazine, appended covalently to electron‐donating styrylbenzene arms, and were readily prepared in excellent yield with high purity by means of three‐fold condensation of triphosphonate with n‐alkoxybenzaldehydes under Horner–Wadsworth–Emmons reaction conditions. Examination of the phase transitional properties by several complementary techniques evidenced self‐assembly into a hexagonal columnar phase, occurring over wide and reasonable thermal ranges. The photophysical properties were studied both in solution and in the fluid/frozen columnar states by UV/Vis absorption and photoluminescence spectroscopy. The emission spectra obtained as a function of the temperature rule out the breaking‐up of larger columns and a non‐radiative, thermally activated process. A study carried out on thin films of the glassy columnar state, which accounts for conserved fluorescence, defect‐free orientation, and freezing ionic species, with the help of atomic force microscopy (AFM) images, suggested a homogeneous granular morphology comprising fibrillar structures. Dissimilarities in the surface morphology and birefringence of thin films of the solid and frozen columnar states were clearly shown by Raman spectroscopy. An electrochemical investigation revealed a LUMO energy of ?4.0 eV. Thus, the discotic motifs presented herein meet certain criteria of organic materials, which are essential for developing electronic devices.     

Helical Polyacetylene‐Based Switchable Chiral Columnar Phases: Frustrated Chain Packing and Two‐Way Shape Actuator

Chiral columns formed by a helical cis‐polyphenylacetylene (PPA) derivative P1 are reversibly switched during a phase transition between two chiral columnar phases: the frustrated Φ_h^3D‐SL phase containing four chains at low temperature and a hexagonal columnar phase Φ_h at high temperature, accompanied by a simultaneous conformational change. The helix–helix transition along the PPA backbone during the Φ_h^3D‐SL‐Φ_h transition makes the uniaxially oriented P1 capable of reversibly and reproducibly elongating (132 %) upon heating and contracting upon cooling, exhibiting the behavior of a two‐way shape actuator.