Oxidation‐Triggered Ring‐Opening Metathesis Polymerization

Eight new N‐Hoveyda‐type complexes were synthesized in yields of 67–92 % through reaction of [RuCl₂(NHC)(Ind)(py)] (NHC=1,3‐bis(2,4,6‐trimethylphenylimidazolin)‐2‐ylidene (SIMes) or 1,3‐bis(2,6‐diisopropylphenylimidazolin)‐2‐ylidene (SIPr), Ind=3‐phenylindenylid‐1‐ene, py=pyridine) with various 1‐ or 1,2‐substituted ferrocene compounds with vinyl and amine or imine substituents. The redox potentials of the respective complexes were determined; in all complexes an iron‐centered oxidation reaction occurs at potentials close to E=+0.5 V. The crystal structures of the reduced and of the respective oxidized Hoveyda‐type complexes were determined and show that the oxidation of the ferrocene unit has little effect on the ruthenium environment. Two of the eight new complexes were found to be switchable catalysts, in that the reduced form is inactive in the ring‐opening metathesis polymerization of cis‐cyclooctene (COE), whereas the oxidized complexes produce polyCOE. The other complexes are not switchable catalysts and are either inactive or active in both reduced and oxidized states.     

Nickel(I) Monomers and Dimers with Cyclopentadienyl and Indenyl Ligands

The reaction of (μ‐Cl)₂Ni₂(NHC)₂ (NHC=1,3‐bis(2,6‐diisopropylphenyl)‐1,3‐dihydro‐2H‐imidazol‐2‐ylidene (IPr) or 1,3‐bis(2,6‐diisopropylphenyl)imidazolidin‐2‐ylidene (SIPr)) with either one equivalent of sodium cyclopentadienyl (NaCp) or lithium indenyl (LiInd) results in the formation of diamagnetic NHC supported Ni^I dimers of the form (μ‐Cp)(μ‐Cl)Ni₂(NHC)₂ (NHC=IPr ( 1 a ) or SIPr ( 1 b ); Cp=C₅H₅) or (μ‐Ind)(μ‐Cl)Ni₂(NHC)₂ (NHC=IPr ( 2 a ) or SIPr ( 2 b ); Ind=C₇H₉), which contain bridging Cp and indenyl ligands. The corresponding reaction between two equivalents of NaCp or LiInd and (μ‐Cl)₂Ni₂(NHC)₂ (NHC=IPr or SIPr) generates unusual 17 valence electron Ni^I monomers of the form (η⁵‐Cp)Ni(NHC) (NHC=IPr ( 3 a ) or SIPr ( 3 b )) or (η⁵‐Ind)Ni(NHC) (NHC=IPr ( 4 a ) or SIPr ( 4 b )), which have nonlinear geometries. A combination of DFT calculations and NBO analysis suggests that the Ni^I monomers are more strongly stabilized by the Cp ligand than by the indenyl ligand, which is consistent with experimental results. These calculations also show that the monomers have a lone unpaired‐single‐electron in their valence shell, which is the reason for the nonlinear structures. At room temperature the Cp bridged dimer (μ‐Cp)(μ‐Cl)Ni₂(NHC)₂ undergoes homolytic cleavage of the Ni?Ni bond and is in equilibrium with (η⁵‐Cp)Ni(NHC) and (μ‐Cl)₂Ni₂(NHC)₂. There is no evidence that this equilibrium occurs for (μ‐Ind)(μ‐Cl)Ni₂(NHC)₂. DFT calculations suggest that a thermally accessible triplet state facilitates the homolytic dissociation of the Cp bridged dimers, whereas for bridging indenyl species this excited triplet state is significantly higher in energy. In stoichiometric reactions, the Ni^I monomers (η⁵‐Cp)Ni(NHC) or (η⁵‐Ind)Ni(NHC) undergo both oxidative and reductive processes with mild reagents. Furthermore, they are rare examples of active Ni^I precatalysts for the Suzuki–Miyaura reaction. Complexes 1 a , 2 b , 3 a , 4 a and 4 b have been characterized by X‐ray crystallography.     

Aggregation and Degradation of White Phosphorus Mediated by N‐Heterocyclic Carbene Nickel(0) Complexes

The reaction of zerovalent nickel compounds with white phosphorus (P₄) is a barely explored route to binary nickel phosphide clusters. Here, we show that coordinatively and electronically unsaturated N‐heterocyclic carbene (NHC) nickel(0) complexes afford unusual cluster compounds with P₁, P₃, P₅ and P₈ units. Using [Ni(IMes)₂] [IMes=1,3‐bis(2,4,6‐trimethylphenyl)imidazolin‐2‐ylidene], electron‐deficient Ni₃P₄ and Ni₃P₆ clusters have been isolated, which can be described as superhypercloso and hypercloso clusters according to the Wade–Mingos rules. Use of the bulkier NHC complexes [Ni(IPr)₂] or [(IPr)Ni(η⁶‐toluene)] [IPr=1,3‐bis(2,6‐diisopropylphenyl)imidazolin‐2‐ylidene] affords a closo‐Ni₃P₈ cluster. Inverse‐sandwich complexes [(NHC)₂Ni₂P₅] (NHC=IMes, IPr) with an aromatic cyclo‐P₅^? ligand were identified as additional products.     

An Original L‐shape,Tunable N‐Heterocyclic Carbene Platform for Efficient Gold(I) Catalysis

The synthesis and characterization of original NHC ligands based on an imidazo[1,5‐a]pyridin‐3‐ylidene (IPy) scaffold functionalized with a flanking barbituric heterocycle is described as well as their use as tunable ligands for efficient gold‐catalyzed C?N, C?O, and C?C bond formations. High activity, regio‐, chemo‐, and stereoselectivities are obtained for hydroelementation and domino processes, underlining the excellent performance (TONs and TOFs) of these IPy‐based ligands in gold catalysis. The gold‐catalyzed domino reactions of 1,6‐enynes give rise to functionalized heterocycles in excellent isolated yields under mild conditions. The efficiency of the NHC gold 5^Me complex is remarkable and mostly arises from a combination of steric protection and stabilization of the cationic Au^I active species by ligand 1^Me .     

An Original L‐shape,Tunable N‐Heterocyclic Carbene Platform for Efficient Gold(I) Catalysis

The synthesis and characterization of original NHC ligands based on an imidazo[1,5‐a]pyridin‐3‐ylidene (IPy) scaffold functionalized with a flanking barbituric heterocycle is described as well as their use as tunable ligands for efficient gold‐catalyzed C?N, C?O, and C?C bond formations. High activity, regio‐, chemo‐, and stereoselectivities are obtained for hydroelementation and domino processes, underlining the excellent performance (TONs and TOFs) of these IPy‐based ligands in gold catalysis. The gold‐catalyzed domino reactions of 1,6‐enynes give rise to functionalized heterocycles in excellent isolated yields under mild conditions. The efficiency of the NHC gold 5^Me complex is remarkable and mostly arises from a combination of steric protection and stabilization of the cationic Au^I active species by ligand 1^Me .     

Identification and characterization of a new family of catalytically highly active imidazolin-2-ylidenes

A new class of easily accessible and stable imidazolin-2-ylidenes has been synthesized where the side chains are comprised of substituted naphthyl units. Introduction of the naphthyl groups generates C 2 -symmetric ( rac) and C s- symmetric ( meso) atropisomers, and interconversion between the isomers is studied in detail both experimentally and computationally. Complete characterization of the carbenes includes rare examples of crystallographically characterized saturated NHC structures. Steric properties of the ligands and an investigation of their stability are also presented. In catalysis, the new ligands show versatility comparable to the most widely used NHCs IMes/SIMes or IPr/SIPr. Excellent catalytic results are obtained when either the NHC salts (ring-opening alkylation of epoxides), NHC-modified palladium compounds (C-C and C-N cross-couplings), or NHC-ruthenium complexes (ring-closing metathesis, RCM) are employed. In several cases, this new ligand family provides catalytic systems of higher reactivity than that observed with previously reported NHC compounds.     

Rhodium Indenyl NHC and Fluorenyl-Tethered NHC Half-Sandwich Complexes: Synthesis,Structures and Applications in the Catalytic C−H Borylation of Arenes and Alkanes

Indenyl (Ind) rhodium N-heterocyclic carbene (NHC) complexes [Rh(η⁵-Ind)(NHC)(L)] were synthesised for 1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazol-2-ylidene (SIPr) with L=C₂H₄ ( 1 ), CO ( 2 a ) and cyclooctene (COE; 3 ), for 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene (SIMes) with L=CO ( 2 b ) and COE ( 4 ), and 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes) with L=CO ( 2 c ) and COE ( 5 ). Reaction of SIPr with [Rh(Cp*)(C₂H₄)₂] did not give the desired SIPr complex, thus demonstrating the “indenyl effect” in the synthesis of 1 . Oxidative addition of HSi(OEt)₃ to 3 proceeded under mild conditions to give the Rh silyl hydride complex [Rh(Ind){Si(OEt)₃}(H)(SIPr)] ( 6 ) with loss of COE. Tethered-fluorenyl NHC rhodium complexes [Rh{(η⁵-C₁₃H₈)C₂H₄N(C)C₂H_xNR}(L)] (x=4, R=Dipp, L=C₂H₄: 11 ; L=COE: 12 ; L=CO: 13 ; R=Mes, L=COE: 14 ; L=CO: 15 ; x=2, R=Me, L=COE: 16 ; L=CO: 17 ) were synthesised in low yields (5–31 %) in comparison to good yields for the monodentate complexes (49–79 %). Compounds 3 and 1 , which contain labile alkene ligands, were successful catalysts for the catalytic borylation of benzene with B₂pin₂ (Bpin=pinacolboronate, 97 and 93 % PhBpin respectively with 5 mol % catalyst, 24 h, 80 °C), with SIPr giving a more active catalyst than SIMes or IMes. Fluorenyl-tethered NHC complexes were much less active as borylation catalysts, and the carbonyl complexes were inactive. The borylation of toluene, biphenyl, anisole and diphenyl ether proceeded to give meta substitutions as the major product, with smaller amounts of para substitution and almost no ortho product. The borylation of octane and decane with B₂pin₂ at 120 and 140 °C, respectively, was monitored by ¹¹B NMR spectroscopy, which showed high conversions into octyl and decylBpin over 4–7 days, thus demonstrating catalysed sp³ C−H borylation with new piano stool rhodium indenyl complexes. Irradiation of the monodentate complexes with 400 or 420 nm light confirmed the ready dissociation of C₂H₄ and COE ligands, whereas CO complexes were inert. Evidence for C−H bond activation in the alkyl groups of the NHC ligands was obtained.     

[(NHC)(NHCewg)RuCl2(CHPh)] Complexes with Modified NHCewg Ligands for Efficient Ring‐Closing Metathesis Leading to Tetrasubstituted Olefins

Imidazolium salts (NHC_ewg ? HCl) with electronically variable substituents in the 4,5‐position (H,H or Cl,Cl or H,NO₂ or CN,CN) and sterically variable substituents in the 1,3‐position (Me,Me or Et,Et or iPr,iPr or Me,iPr) were synthesized and converted into the respective [AgI(NHC)_ewg] complexes. The reactions of [(NHC)RuCl₂(CHPh)(py)₂] with the [AgI(NHC_ewg)] complexes provide the respective [(NHC)(NHC_ewg)RuCl₂(CHPh)] complexes in excellent yields. The catalytic activity of such complexes in ring‐closing metathesis (RCM) reactions leading to tetrasubstituted olefins was studied. To obtain quantitative substrate conversion, catalyst loadings of 0.2–0.5 mol % at 80 °C in toluene are sufficient. The complex with the best catalytic activity in such RCM reactions and the fastest initiation rate has an NHC_ewg group with 1,3‐Me,iPr and 4,5‐Cl,Cl substituents and can be synthesized in 95 % isolated yield from the ruthenium precursor. To learn which one of the two NHC ligands acts as the leaving group in olefin metathesis reactions two complexes, [(FL‐NHC)(NHC_ewg)RuCl₂(CHPh)] and [(FL‐NHC_ewg)(NHC)RuCl₂(CHPh)], with a dansyl fluorophore (FL)‐tagged electron‐rich NHC ligand (FL‐NHC) and an electron‐deficient NHC ligand (FL‐NHC_ewg) were prepared. The fluorescence of the dansyl fluorophore is quenched as long as it is in close vicinity to ruthenium, but increases strongly upon dissociation of the respective fluorophore‐tagged ligand. In this manner, it was shown for ring‐opening metathesis ploymerization (ROMP) reactions at room temperature that the NHC_ewg ligand normally acts as the leaving group, whereas the other NHC ligand remains ligated to ruthenium.     

Palladium‐Catalyzed Direct C2‐Arylation of an N‐Heterocyclic Carbene: An Atom‐Economic Route to Mesoionic Carbene Ligands

Blocking the C2 position of an imidazole‐derived classical N‐heterocyclic carbene (NHC) with an aryl group is an essential strategy to establish a route to mesoionic carbenes (MICs), which coordinate to the metal via the C4 (or C5) carbon atom. An efficient catalytic route to MIC precursors by direct arylation of an NHC is reported. Treatment of 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene (IPr) with an aryl iodide (RC₆H₄I) in the presence of 0.5 mol % of [Pd₂(dba)₃] (dba=dibenzylideneacetone) precatalyst affords the C2‐arylated imidazolium salts {IPr(C₆H₄R)}I (R=H, 4‐Me, 2‐Me, 4‐OMe, 4‐COOMe) in excellent (up to 92 %) yields. Treatment of {IPr(C₆H₅)}I with CuI and KN(SiMe₃)₂ exclusively affords the MIC–copper complex [(IPrPh)CuI].     

Steric and electronic properties of N-heterocyclic carbenes (NHC): a detailed study on their interaction with Ni(CO)4

N-heterocyclic carbene ligands IMes (1), SIMes (2), IPr (3), SIPr (4), and ICy (5) react with Ni(CO)(4) to give the saturated tricarbonyl complexes Ni(CO)(3)(IMes) (8), Ni(CO)(3)(SIMes) (9), Ni(CO)(3)(IPr) (10), Ni(CO)(3)(SIPr) (11), and Ni(CO)(3)(ICy) (12), respectively. The electronic properties of these complexes have been compared to their phosphine analogues of general formula Ni(CO)(3)(PR(3)) by recording their nu(CO) stretching frequencies. While all of these NHCs are better donors than tertiary phosphines, the differences in donor properties between ligands 1-5 are surprisingly small. Novel, unsaturated Ni(CO)(2)(IAd) (13) and Ni(CO)(2)(I(t)()Bu) (14) compounds are obtained from the reaction of Ni(CO)(4) with IAd (6) and I(t)()Bu (7). Complexes 13 and 14 are highly active toward substitution of the NHC as well as the carbonyl ligands. This has allowed the determination of Ni-C(NHC) bond dissociation energies and the synthesis of various unsaturated Ni(0) and Ni(II) complexes. Computational studies on compounds 8-14 are in line with the experimental findings and show that IAd (6) and I(t)()Bu (7) are more bulky than IMes (1), SIMes (2), IPr (3), SIPr (4), and ICy (5). Furthermore, a method based on %V(bur) values has been developed for the direct comparison of steric requirements of NHCs and tertiary phosphines. Complexes 8-14, as well as NiCl(C(3)H(5))(I(t)()Bu) (16) and NiBr(C(3)H(5))(I(t)()Bu) (17), have been characterized by X-ray crystallography.     

Palladium(0) NHC complexes: a new avenue to highly efficient phosphorescence

We report the first examples of highly luminescent di-coordinated Pd(0) complexes. Five complexes of the form [Pd(L)(L′)] were synthesized, where L = IPr, SIPr or IPr* NHC ligands and L′ = PCy₃, or IPr and SIPr NHC ligands. The photophysical properties of these complexes were determined in degassed toluene solution and in the solid state and contrasted to the poorly luminescent reference complex [Pd(IPr)(PPh₃)]. Organic light-emitting diodes were successfully fabricated but attained external quantum efficiencies of between 0.3 and 0.7%.     

Linker‐Free,Silica‐Bound Olefin‐Metathesis Catalysts: Applications in Heterogeneous Catalysis

A set of heterogenized olefin‐metathesis catalysts, which consisted of Ru complexes with the H₂ITap ligand (1,3‐bis(2′,6′‐dimethyl‐4′dimethyl aminophenyl)‐4,5‐dihydroimidazol‐2‐ylidene) that had been adsorbed onto a silica support, has been prepared. These complexes showed strong binding to the solid support without the need for tethering groups on the complex or functionalized silica. The catalysts were tested in the ring‐opening–ring‐closing‐metathesis (RO‐RCM) of cyclooctene (COE) and the self‐metathesis of methyl oleate under continuous‐flow conditions. The best complexes showed a TON>4000, which surpasses the previously reported materials that were either based on the Grubbs–Hoveyda II complex on silica or on the classical heterogeneous Re₂O₇/B₂O₃ catalyst.     

Crystalline Divinyldiarsene Radical Cations and Dications

The divinyldiarsene radical cations [{(NHC)C(Ph)}As]₂(GaCl₄) (NHC=IPr: C{(NDipp)CH}₂ 3 ; SIPr: C{(NDipp)CH₂}₂ 4 ; Dipp=2,6‐iPr₂C₆H₃) and dications [{(NHC)C(Ph)}As]₂(GaCl₄)₂ (NHC=IPr 5 ; SIPr 6 ) are readily accessible as crystalline solids on sequential one‐electron oxidation of the corresponding divinyldiarsenes [{(NHC)C(Ph)}As]₂ (NHC=IPr 1 ; SIPr 2 ) with GaCl₃. Compounds 3 – 6 have been characterized by X‐ray diffraction, cyclic voltammetry, EPR/NMR spectroscopy, and UV/vis absorption spectroscopy as well as DFT calculations. The sequential removal of one electron from the HOMO, that is mainly the As?As π‐bond, of 1 and 2 leads to successive elongation of the As=As bond and contraction of the C?As bonds from 1 / 2 → 3 / 4 → 5 / 6 . The UV/vis spectrum of 3 and 4 each exhibits a strong absorption in the visible region associated with SOMO‐related transitions. The EPR spectrum of 3 and 4 each shows a broadened septet owing to coupling of the unpaired electron with two ⁷⁵As (I=3/2) nuclei.     

Stabilization of a Silaaldehyde by its η2 Coordination to Tungsten

Treatment of pyridine‐stabilized silylene complexes [(η⁵‐C₅Me₄R)(CO)₂(H)W?SiH(py)(Tsi)] (R=Me, Et; py=pyridine; Tsi=C(SiMe₃)₃) with an N‐heterocyclic carbene ^MeIⁱPr (1,3‐diisopropyl‐4,5‐dimethylimidazol‐2‐ylidene) caused deprotonation to afford anionic silylene complexes [(η⁵‐C₅Me₄R)(CO)₂W?SiH(Tsi)][H^MeIⁱPr] (R=Me ( 1‐Me ); R=Et ( 1‐Et )). Subsequent oxidation of 1‐Me and 1‐Et with pyridine‐N‐oxide (1 equiv) gave anionic η²‐silaaldehydetungsten complexes [(η⁵‐C₅Me₄R)(CO)₂W{η²‐O?SiH(Tsi)}][H^MeIⁱPr] (R=Me ( 2‐Me ); R=Et ( 2‐Et )). The formation of an unprecedented W‐Si‐O three‐membered ring was confirmed by X‐ray crystal structure analysis.     

Probing the Diastereoselectivity of Staudinger Reactions Catalyzed by N‐Heterocyclic Carbenes

The reaction of ethylphenylketene with 1,3‐dimesitylimidazol‐2‐ylidene (IMes) or 1,3‐dimesitylimidazolin‐2‐ylidene (SIMes) afforded the corresponding azolium enolates in high yields. The two zwitterions were fully characterized by various analytical techniques. Their thermal stabilities were monitored by thermogravimetric analysis and the molecular structure of SIMes ? EtPhC?C?O was determined by means of X‐ray crystallography. A mechanism was proposed to account for the trans‐diastereoselectivity observed in the [2+2] cycloaddition of ketenes and N‐protected imines catalyzed by N‐heterocyclic carbenes and an extensive catalytic screening was performed to test its validity. The steric bulk of the NHC catalyst markedly affected the cis/trans ratio of the model β‐lactam product. The nature of the solvent used to carry out the Staudinger reaction also significantly influenced its diastereoselectivity. Conversely, the nature of the substituent on the N‐sulfonated imine reagent and the reaction temperature were less critical parameters.     

Synthesis,characterization and catalytic activity in Suzuki–Miyaura coupling of palladacycle complexes with n‐butyl‐substituted N‐heterocyclic carbene ligands

A series of monomeric palladacycle complexes bearing n‐butyl‐substituted N‐heterocyclic carbenes, namely [Pd(NHC)X(dmba)] (dmba: dimethylbenzylamine and [Pd(NHC)X(ppy)]; NHC: 1‐n‐butyl‐3‐substituted benzylimidazol‐2‐ylidene; ppy: 2‐phenylpyridine), were prepared either by transmetallation from the corresponding silver carbene complexes or by the reaction of the corresponding acetate‐bridged palladacycle dimer with N‐heterocyclic carbene ligands in high yields. The palladium(II) complexes were characterized using elemental analyses, APCI‐MS, ¹H NMR and ¹³C NMR spectroscopies. These complexes are efficient in the Suzuki–Miyaura coupling reaction between phenylboronic acid and aryl bromides.     

Chemistry surrounding monomeric copper(I) methyl, phenyl, anilido, ethoxide, and phenoxide complexes supported by N-heterocyclic carbene ligands: reactivity consistent with both early and late transition metal systems

Monomeric copper(I) alkyl complexes that possess the N-heterocyclic carbene (NHC) ligands IPr, SIPr, and IMes [IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene, SIPr = 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene, IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene] react with amines or alcohols to release alkane and form the corresponding monomeric copper(I) amido, alkoxide, or aryloxide complexes. Thermal decomposition reactions of (NHC)Cu(I) methyl complexes at temperatures between 100 and 130 degrees C produce methane, ethane, and ethylene. The reactions of (NHC)Cu(NHPh) complexes with bromoethane reveal increasing nucleophilic reactivity at the anilido ligand in the order (SIPr)Cu(NHPh) < (IPr)Cu(NHPh) < (IMes)Cu(NHPh) < (dtbpe)Cu(NHPh) [dtbpe = 1,2-bis(di-tert-butylphosphino)ethane]. DFT calculations suggest that the HOMO for the series of Cu anilido complexes is localized primarily on the amido nitrogen with some ppi(anilido)-dpi(Cu) pi-character. [(IPr)Cu(mu-H)]2 and (IPr)Cu(Ph) react with aniline to quantitatively produce (IPr)Cu(NHPh)/dihydrogen and (IPr)Cu(NHPh)/benzene, respectively. Analysis of the DFT calculations reveals that the conversion of [(IPr)Cu(mu-H)]2 and aniline to (IPr)Cu(NHPh) and dihydrogen is favorable with DeltaH approximately -7 kcal/mol and DeltaG approximately -9 kcal/mol.     

Alkali‐Metal‐Mediated Magnesiations of an N‐Heterocyclic Carbene: Normal,Abnormal, and “Paranormal” Reactivity in a Single Tritopic Molecule

Herein the sodium alkylmagnesium amide [Na₄Mg₂(TMP)₆(nBu)₂] (TMP=2,2,6,6‐tetramethylpiperidide), a template base as its deprotonating action is dictated primarily by its 12 atom ring structure, is studied with the common N‐heterocyclic carbene (NHC) IPr [1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene]. Remarkably, magnesiation of IPr occurs at the para‐position of an aryl substituent, sodiation occurs at the abnormal C4 position, and a dative bond occurs between normal C2 and sodium, all within a 20 atom ring structure accommodating two IPr²⁻. Studies with different K/Mg and Na/Mg bimetallic bases led to two other magnesiated NHC structures containing two or three IPr⁻ monoanions bound to Mg through abnormal C4 sites. Synergistic in that magnesiation can only work through alkali‐metal mediation, these reactions add magnesium to the small cartel of metals capable of directly metalating a NHC.     

Alkali‐Metal‐Mediated Magnesiations of an N‐Heterocyclic Carbene: Normal,Abnormal, and “Paranormal” Reactivity in a Single Tritopic Molecule

Herein the sodium alkylmagnesium amide [Na₄Mg₂(TMP)₆(nBu)₂] (TMP=2,2,6,6‐tetramethylpiperidide), a template base as its deprotonating action is dictated primarily by its 12 atom ring structure, is studied with the common N‐heterocyclic carbene (NHC) IPr [1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene]. Remarkably, magnesiation of IPr occurs at the para‐position of an aryl substituent, sodiation occurs at the abnormal C4 position, and a dative bond occurs between normal C2 and sodium, all within a 20 atom ring structure accommodating two IPr^2?. Studies with different K/Mg and Na/Mg bimetallic bases led to two other magnesiated NHC structures containing two or three IPr^? monoanions bound to Mg through abnormal C4 sites. Synergistic in that magnesiation can only work through alkali‐metal mediation, these reactions add magnesium to the small cartel of metals capable of directly metalating a NHC.     

Development of versatile and silver-free protocols for gold(I) catalysis

The use of a versatile N‐heterocyclic carbene (NHC) gold(I) hydroxide precatalyst, [Au(OH)(IPr)], (IPr=N,N′‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene) permits the in situ generation of the [Au(IPr)]⁺ ion by simple addition of a Brønsted acid. This cationic entity is believed to be the active species in numerous catalytic reactions. ¹H NMR studies in several solvent media of the in situ generation of this [Au(IPr)]⁺ ion also reveal the formation of a dinuclear gold hydroxide intermediate [{Au(IPr)}₂(μ‐OH)], which is fully characterized and was tested in gold(I) catalysis.