Mesitylenesulfonic acid dihydrate: structure and proton conductivity

The molecular and crystal structure of single-crystalline mesitylenesulfonic acid dihydrate (1) was determined by X-ray diffraction and IR spectroscopy. According to X-ray diffraction data, water molecules in the crystal structure form H₅O₂ ⁺ cations stabilized by an intracationic hydrogen bond with a length of 2.45(1) Å. The formation of the asymmetric H₅O₂ ⁺ cation was confirmed by IR spectroscopy. The crystallographic nonequivalence of the water molecules results in a shift of the bridging proton from the midpoint of the strong hydrogen bond in the cation toward one of the water molecules. The proton conductivity of compound 1 was measured by impedance spectroscopy. Dihydrate 1 is completely dehydrated upon prolonged storage in a dry argon glove box and undergoes the transition to the dielectric state. Compound 1 is stable in the humidity range of 32–66 rel.%. The conductivity of dihydrate 1 is (2.4±0.3) · 10^?5 Ohm^?1 cm^?1 at 298 K, E _a = 0.21±0.01 eV.     

A supramolecular complex based on poly-Keggin-anion chains: synthesis, structure characterization, and conductivity

Abstract  

A proton-conductive supramolecular complex, {[Cu(H₂O)₈][H(H₂O)₃](HINO)₄(PMo₁₂O₄₀)} _n , was constructed by a self-assembly of H⁺(H₂O)₃ clusters, [Cu(H₂O)₈]²⁺ clusters, [PMo₁₂O₄₀]³⁻ anions, and isonicotinic acid N-oxide (HINO). Single-crystal X-ray diffraction analysis at 293 K revealed that the complex presented the three-dimensional (3D) supramolecular framework built from non-covalent interactions. Interestingly, [PMo₁₂O₄₀]³⁻ anions self-assembled into poly-Keggin-anion chains in the supramolecular framework. Thermogravimetric analysis shows no weight loss in the temperature range of 20–100 °C, indicating that all water molecules in the unit structure are not easily lost below 100 °C. Surprisingly, the proton conductivity of the complex in the temperature range of 85–100 °C under 98% RH condition reached good proton conductivity of 10⁻³ S cm⁻¹. A possible mechanism of the proton conduction was proposed according to the experimental results.     

Synthesis,structure, and electric properties of oxygen-deficient perovskites Ba<Subscript>3</Subscript>In<Subscript>2</Subscript>ZrO<Subscript>8</Subscript> and Ba<Subscript>4</Subscript>In<Subscript>2</Subscript>Zr<Subscript>2</Subscript>O<Subscript>11</Subscript>

Perovskite phases Ba₃In₂ZrO₈ and Ba₄In₂Zr₂O₁₁ with the nominal concentration of structural oxygen vacancies 1/9 and 1/12, respectively, were synthesized by solid-phase and solution methods. X-ray diffraction showed cubic symmetry of both phases with the unit cell parameter a = 0.4193(2) and 0.4204(3) nm, respectively. The absence of superstructural lines resulted in the conclusion on statistical arrangement of oxygen vacancies. Thermogravimetry and mass spectrometry proved that both phases can reversibly absorb water from gas phase (pH₂O = 2 × 10⁻² atm) with observed correlation between the concentration of oxygen vacancies and amount of absorbed water. The total water amount was up to 0.9 mol per formula unit or, if recalculated for perovskite unit ABO₃, 0.3 and 0.23 mol H₂O, respectively. The temperature curves of coductivity in the atmosphere with various partial water vapor pressures (pH₂O = 3 × 10⁻⁵ and 2 × 10⁻² atm) showed significantly higher conductivity and lower activation energy (0.52 eV) in humid atmosphere due to proton transfer. The proton conductivity is up to 5 × 10⁻⁴ Ohm⁻¹ cm⁻¹ at 300°C for Ba₃In₂ZrO₈ specimen. IR spectrometry showed that protons in the structure exist primarily in OH-groups.     

New molecular magnetic metals: κ-(BDH-TTP)4CuCl4·(H2O)n and κ-(BDH-TTP)2[CuCl4]0.67·(H2O)0.33 (BDH-TTP is 2,5-bis(1,3-dithiolan-2-ylidene)-1,3,4,6-tetrathiapentalene)

New radical cation salts based on 2,5-bis(1,3-dithiolan-2-ylidene)-1,3,4,6-tetrathiapentalene (BDH-TTP), viz., κ-(BDH-TTP)₄CuCl₄·(H₂O) _n (1) and κ-(BDH-TTP)₂[CuCl₄]_0.67· ·(H₂O)_0.33 (2), were synthesized and structurally characterized. Single crystals were prepared by the electrochemical oxidation of BDH-TTP under galvanostatic conditions. The X-ray diffraction study showed that the salts have layered structures characterized by the presence of κ-type BDH-TTP conducting layers. These layers alternate with the complex anions composed of [CuCl₄]²⁻ units and water molecules. Both salts exhibit the temperature dependence of the metallic conductivity down to 4.2 K. Spin-spin antiferromagnetic correlations in the Cu²⁺ subsystem were observed in the crystals of 2.     

The characteristics of the nanosized η-TiO2 polymorph

The nanosized η-TiO₂ polymorph was prepared by the hydrolysis of titanyl sulfate (TiO)SO₄ · xH₂SO₄ · yH₂O. η-TiO₂ was studied by X-ray diffraction, X-ray photoelectron spectroscopy, IR spectroscopy, and Raman spectroscopy. Characteristic X-ray data and distinguishing Raman spectrum features were found for η-TiO₂,. The surface of η-TiO₂ samples contained adsorbed OH⁻ particles and water molecules or water molecules of crystal hydrates. The free specific surface area of samples with crystallite sizes of L = 50 (4) and 60 (5) ? was S = 10.17 (9) and 15.6 (1) m²/g. The characteristics of samples with η-TiO₂ were favorable for their use as photocatalysts and adsorbents.     

Chemical composition and discharge characteristics of γ-MnO2 prepared using manganese ore

γ-MnO₂, synthesized chemically from local manganese ore, was subjected to physicochemical studies. X-ray diffraction, Fourier transform infrared spectroscopy, surface area measurement, thermogravimetry/differential thermal analysis, scanning electron microscopy, and chemical analyses were used to determine the structural and chemical disorder present in the samples. The electrochemical activity in alkaline medium was evaluated by recording discharge profile at constant current and constant load condition. The charge–discharge profile in 9 M KOH was studied by cyclic voltammetry. The samples were found to be “type III” γ-MnO₂ with high degree of microtwinning defect (T _w). The De Wolff disorder was in the range 0.21 < P _r < 0.32. Thermal studies showed weight loss due to the loss of structural water and formation of lower manganese oxides. Mn⁴⁺ vacancy, calculated on the basis of cation vacancy model, was in range 0.06 < x < 0.1. The discharge in alkaline medium was accompanied by homogeneous solid-state proton diffusion in MnO₂ lattice. The energy density is explained as a function of proton transfer rate (P _t) during the discharge.     

Crystal and molecular structures of tetraaqua(di-<Emphasis Type="Italic">para</Emphasis>-oxybenzoato)iron(II) tetrahydrate

The new complex [(p-HOC₆H₄CO₂)₂Fe(H₂O)₄] · 4H₂O is synthesized and studied by X-ray diffraction analysis. The Fe(II) cation is coordinated by two para-hydroxybenzoate anions through the mono-dentate mode. Four oxygen atoms of the water molecules complete the coordination polyhedron of the central atom to an octahedron. Four molecules of water of crystallization “cross-link” the monomers to form a polymeric structure.     

Molecular and crystal structures of [FeCl(HMPA)3(H2O)2]2+(FeCl4) 2? · 3HMPA

IR and single-crystal X-ray diffraction study are carried out for compound, C₃₆H₁₁₂Cl₉Fe₃N₁₈O₈P₆(I). It crystallizes in the orthorhombic space group P2₁2₁2₁ with a = 14.2992(3), b = 21.4351(4), c = 25.5407(5) ?, V = 7828.3(3) ?³, ρ_calcd = 1.553 g/cm³, Z = 4. The FeCl fragment is coordinated with chlorine atom of two water molecules and three HMPA molecules to form a cation, with a distorted octahedral coordinate geometry. In the crystal I, the cation is linked with HMPA by the O-H…O hydrogen bond. The chiral crystal is formed through self-assembly even from achiral molecules.     

Synthesis and crystal structure of tetraphenylphosphonium isocyanurate pentahydrate

A new complex [Pb(Crypt-222)(H₂O)₂]⁺ · 2(iso-PrO)₂P(S)N⁻C(S)Ph (I) was prepared and studied by X-ray diffraction: space group C2/c, a = 16.170 ?, b = 10.405 ?, c = 34.116 ?, β = 103.32°, Z = 4. The monoclinic structure of I was solved by direct methods and refined by full-matrix least-squares calculation in the anisotropic approximation to R = 0.098 for 6414 independent reflections (CAD4 automated diffractometer, λMoK _α). In structure I, the host-guest [Pb(Crypt-222)(H₂O)₂]⁺ cation is located on a twofold crystallographic axis. The Pb²⁺ cation is coordinated by all eight heteroatoms (6O + 2N) of the cryptand ligand and by two O atoms of water molecules. The Pb²⁺ coordination polyhedron (CN = 10) is a highly distorted two-base-centered dicapped trigonal prism. The crystal structure of I contains one independent thiophosphoramidate anion with deprotonated nitrogen. In crystal I, the complex cation is connected to two thiophosphoramidate anions by ion-ion hydrogen bonds, O(w)-H...S.     

Surfactant assisted preparation and characterization of carboxymethyl cellulose Sn(IV) phosphate composite nano-rod like cation exchanger

Carboxymethyl cellulose Sn(IV) phosphate composite nano-rod like cation exchanger with diameter in the range of 20–40 nm, length in the range of 100–150 μm and particle size in the range of 21–38 nm have been successfully prepared by surfactant assisted sol–gel method. Scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, fourier transform infra red spectroscopy and thermogravimetric analysis-differential thermal analysis studies were carried out to study the structure and morphology of this composite nano-rod like cation exchanger. Freundlich adsorption isotherm is well fitted for the adsorption of pyridine on the surface of this composite nano-rod like cation exchanger. The thermodynamic parameters such as Freundlich constant, thermodynamic equilibrium constant (K ₀), standard free energy changes (ΔG ⁰), standard enthalpy changes (ΔH ⁰) and standard entropy changes (ΔS ⁰) have been evaluated. These parameters indicated that the adsorption of pyridine on the surface of composite nano-rod like cation exchanger was feasible, spontaneous and exothermic in nature which suggests for the potential application of pyridine removal from water.     

Synthesis, crystal structure, and conducting properties of a new molecular conductor (DBTTF)11(TeCl6)4

The structure and conducting properties of a new radical cation salt of dibenzotetrathiafulvalene (DBTTF),viz., (DBTTF)₁₁(TeCl₆)₄ (1), were studied. According to the X-ray diffraction data, the crystal of1 contains six crystallographically independent DBTTF radical cations alternating with stacks of the (TeCl₆)²⁻ anions. At room temperature, the conductivity of the crystals is 15 S cm⁻¹ and it changes exponentially as the temperature decreases. It was found that an increase in the size of the anion in compounds of type1 results in the appearance of interactions between the stacks and in an enhancement of the two-dimensional character of the conductivity. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 370–372, February, 2000.     

The structure and thermal behaviour of sodium and potassium multinuclear compounds with hexamethylenetetramine

Sodium and potassium thiocyanate complex compounds of formulae [Na(hmta)(H₂O)₄]₂²⁺·2SCN⁻ (1) and [K₂(hmta)(SCN)₂] _n (2) have been synthesized and characterised by IR spectroscopy, thermogravimetry coupled with differential thermal analysis, elemental analysis and X-ray crystallography. Each sodium and potassium cation is six co-ordinated, the sodium by one monofunctional hmta molecule, three terminal water molecules and two bridging water molecules, and the potassium by two bridging tetrafunctional hmta molecules and four bridging tetrafunctional thiocyanate ions. The coordination polyhedra of the central atoms can be described as distorted tetragonal bipyramids. The complex cations and anions of (1) are interconnected by multiple intramolecular O(water)—H···N(hmta/NCS) and O(water)—H···S hydrogen bonds to the three dimensional net. In each complex cation the intramolecular O–H···O hydrogen bonds link two terminal water molecules bonded to two metal cations. The compound (2) forms the three dimensional hybrid network in which the classical two-dimensional coordination polymers are linked by inorganic SCN⁻ spacers to the third-dimension. Thermal analyses show that the compounds decompose gradually in three (for 1) and two (for 2) steps with formation of Na₂SO₄ and K₂S as the final products, respectively, for 1 and 2.     

Tysonite-type solid solutions in the BiF<Subscript>3</Subscript>-BiOF-BaF<Subscript>2</Subscript> system: Polymorphism and anionic conductivity

Tysonite solid solutions Bi_1−x Ba _x O _y F_3−x−2y in the BiF₃-BiOF-BaF₂ system were obtained by solid-phase synthesis in sealed copper tubes in an argon atmosphere at 873 K with subsequent quenching. The solid solutions were studied by X-ray diffraction, electron diffraction, and impedance spectroscopy. On the basis of X-ray powder diffraction data, the homogeneity ranges of the tysonite solid solutions were determined and the scheme of their location in the BiF₃-BiOF-BaF₂ system at 873 K was suggested. Aliovalent substitutions in both the cation and anion sublattices Ba²⁺ → Bi³⁺ and O²⁻ → F⁻ made it possible to vary the concentration of anion vacancies. It was found that, at a high concentration of anion defects at 873 K, the hexagonal tysonite modification with space group P6₃/mmc is stable. With a decrease in the defect concentration, the trigonal tysonite modification with space group $ P\bar 3c1 $ P\bar 3c1 becomes stable. An ordered monoclinic tysonite-type modification BiO _y F_{3 − 2y} (0.13 < y < 0.23) was revealed. For the homogeneity ranges of all tysonite phases, dependences of the unit cell parameters and conductivity on the composition along the sections with a constant barium or oxygen content were reported. The most probable location of oxygen anions and anion vacancies in the tysonite structure is discussed.     

Li+/H+ ion exchange in Li3 ? 2xNbxM2 ? x(PO4)3 (M = In, Fe) materials with a NASICON structure

H_{3 − 2x} Nb _x M_{2 − x} (PO₄)₃ (M = In, Fe) acid phosphates have been obtained by ion exchange from their lithium forms and X-ray powder diffraction, impedance measurements, and ⁷Li and ¹H NMR spectroscopy. The parameters of the hexagonal unit cell of the proton-exchanged forms differ only slightly from those of the initial lithium compounds. According to ¹H NMR data, the proton in the acid phosphates is not hydrated. The conductivity of the acid phosphates at high temperatures depends weakly on their composition and is ∼1.7 × 10⁻⁷ S cm⁻¹ at 620 K. The activation energy of conduction is 30–33 kJ/mol (430–770 K).     

Synthesis,structure, and the photomagnetic effect in crystals of 1,3,3,7′-tetramethylspiro[indoline-2,2′-2<Emphasis Type="Italic">H</Emphasis>-pyrano[3,2-<Emphasis Type="Italic">f</Emphasis>]quinolinium] tris(oxalato)chromate(III)

Single crystals of 1,3,3,7′-tetramethylspiro[indoline-2,2′-2H-pyrano[3,2-f]quinolinium] tris(oxalato)chromate(III), in which the cation exists in the open merocyanine form, (Mc)₃Cr(ox)₃·11.56H₂O (ox is C₂O₄ ²⁻), were obtained for the first time. The molecular and crystal structure of the salt was established by X-ray diffraction. The crystal structure consists of two types of layers (cationic and anionic). In the cationic layer, the Mc⁺ cations are parallel to each other and form a close-packed arrangement. The anionic layer consists of oxalatochromate complexes and water molecules linked together by hydrogen bonds. The salt does not display photochromic properties typical of salts of cationic spiropyrans. However, UV irradiation (355 nm) causes a change in the average spin of the sample from 3/2 to 1 and a change in the Weiss constant from −7 to 7 K.     

Multiple bond migration with participation of a protophilic agent

The pathways of migration of the multiple bond in propene and propyne molecules involving the hydroxide ion were investigated by theab initio (RHF/6-31+G^* and MP2/6-31+G^*) methods. Stationary points corresponding to stable complexes between the molecules under study and the hydroxide ion and between corresponding carbanions and water molecule were found on the potential energy surfaces of the proton transfer reactions. In the presence of hydroxide ion, migration of the multiple bond can occur by an “intramolecular” mechanism of the proton transfer involving the proton of hydroxide ion bound in the complex with propene or propyne molecule. For the propene system, such a mechanism seems to be quite realistic and more preferable energetically than a traditional two-stage mechanism with a passage of the proton into the medium. For the system with the triple bond, an equal expenditure of energy is required to follow any mechanism (without taking into account the effects of solvation and the interaction with a cation), whereas the formation of the stable [H₂C=C=CH·H₂O]⁻ complex can prevent further transformations. For Part 1, see Ref. 1. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 35–41, January, 1999.     

Crystalline phase content and ionic conductivity correlation in LATP glass–ceramic

Li₂O–Al₂O₃–TiO₂–P₂O₅ (LATP) glass was fabricated by conventional melt quenching route. Glass transition temperature (T _g = 296 °C) and crystallization temperatures (T _C1,2) were obtained from thermal analysis. LATP glass was converted to glass–ceramic by heat treatment in the range 550–950 °C for 6 h. X-ray diffraction analysis revealed LiTi₂(PO₄)₃ as a major phase. Ionic conductivity increased monotonically with concentration, reaching a maximum of ~10⁻⁴ S/cm. AlPO₄ phase was detected in samples heat-treated above 850 °C. Its presence decreased the conductivity, suggesting LiTi₂(PO₄)₃ phase as main contributor to high ionic conductivity. NMR spectra confirmed the presence of mobile ⁷Li ions in the entire sample series and also gave some information on the structure and dynamics of conductivity.     

Photo Responsive Electron and Proton Conductivity within a Hydrogen-Bonded Organic Framework

Rational design of crystalline porous materials with coupled proton-electron transfer has not yet been reported to date. Herein, we report a donor-acceptor (D-A) π-π stacking hydrogen-bonded organic framework (HOF; HOF-FJU-36 ) with zwitterionic 1,1′-bis(3-carboxybenzyl)-4,4′-bipyridinium (H₂L²⁺) as acceptor and 2,7-naphthalene disulfonate (NDS²⁻) as donor to form a two-dimensional (2D) layer. Three water molecules were situated in the channels to connect with acidic species through hydrogen bonding interactions to give a 3D framework. The continuous π-π interactions along the a axis and the smooth H-bonding chain along the b axis provide the electron and proton transfer pathways, respectively. After 405 nm light irradiation, the photogenerated radicals could simultaneously endow HOF-FJU-36 with photoswitchable electron and proton conductivity due to coupled electron-proton transfer. By single-crystal X-ray diffraction (SCXRD) analyses, X-ray photoelectron spectroscopy (XPS), transient absorption spectra and density functional theory (DFT) calculations, the mechanism of the switchable conductivity upon irradiation has been demonstrated.     

Proton mobility in complex [RhL4Cl2]HSO4 · nH2SO4 · mH2O salts (L = Py, γ-picoline)

The method of deposition from solutions was used to synthesize [RhL ₄Cl₂]HSO₄ · nH₂SO₄ · mH₂O complex salts (L = Py, γ-picoline), n ≈ 0.5−0.6, m ≈ 5−6. According to the data of X-ray phase analysis, the crystal structure of these salts is formed by layers of cations separated by layers consisting of anions molecules of sulfuric acid and water connected through a system of hydrogen bonds. Calorimetric methods were used to study phase transitions and the range of thermal stability of salts. The method of ¹H NMR spectroscopy discovered that protons within the {HSO₄⁻ · nH₂SO₄ · mH₂O} subsystem featured enhanced conductivity. Conductivity studies showed that trans-[RhL ₄Cl₂]HSO₄ · nH₂SO₄ · mH₂O samples had high proton conductivity.     

First radical cation salts of 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP) with copper(II) metal complex anions: β-(BDA-TTP)4Cu2Cl6 and (BDA-TTP)2CuCl4

New radical cation salts based on 2,5-bis(1,3-dithian-2-ylidene)-1,3,4,6-tetrathiapentalene (BDA-TTP) with copper(II) metal complex anions, β-(BDA-TTP)₄Cu₂Cl₆ and (BDA-TTP)₂CuCl₄, were synthesized and structurally characterized. Single crystals were prepared by electrochemical oxidation of BDA-TTP under galvanostatic conditions. X-ray diffraction study demonstrated that the salts have a layered structure, in which the conducting BDA-TTP layers alternate with the [Cu₂Cl₆]²⁻ or [CuCl₄]²⁻ anions. Both salts show the semiconductor-type temperature dependence of the conductivity. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 48–54, January, 2007.