Planar nano-block structures Tin+1Al0.5Cn and Tin+1Cn (n = 1, and 2) from MAX phases: Structural,electronic properties and relative stability from first principles calculations

Structural, electronic properties and relative stability of quasi-two-dimensional (2D) free-standing planar nano-block (NBs) structures Ti_n+1Al_0.5C_n and Ti_n+1C_n (n = 1 and 2), which can be prepared using the recently developed procedure of exfoliation of corresponding NBs from MAX phases, were examined within first principles calculations in comparison with parent MAX phases Ti₃AlC₂ and Ti₂AlC. We found that in general Ti_n+1C_n and Ti_n+1Al_0.5C_n NBs retain the atomic geometries of the corresponding blocks of the MAX phases, but some structural distortions for the NBs occur owing to the lowering of the coordination number for atoms in the external Ti sheets of the nano-block structures. Our analysis based on their cohesive and formation energies reveals that the stability of the nano-block structures increases with index n (or, in other words, with a growth of the number of Ti–C bonds), the Al-containing NBs becoming more stable than the “pure” Ti–C NBs. Our data show that the magnetization of the simulated planar nano-block structures can be expected; so, for the Ti₃C₂ nano-block the most stable will be the spin configuration, where within each external Ti sheet the spins are coupled ferromagnetically together with antiferromagnetic ordering between opposite external titanium sheets of this nano-block.     

Effect of nitrogen content on the properties of CrNxOyCz coating prepared by DC reactive magnetron sputtering

The CrN_xO_yC_z coatings were deposited by planar DC reactive magnetron sputtering onto AZ31 Mg alloy and high speed tool steel (HSTS) substrates at a substrate temperature of 200 °C. The effect of N₂ content on composition and structure of the CrN_xO_yC_z coatings was investigated. The structure of the CrN_xO_yC_z coatings was analyzed by a glancing angle X-ray diffraction (GXRD). The cross-section morphology and thickness of the CrN_xO_yC_z coatings were checked by a field emission scanning electron microscope (FESEM), and the composition profile and chemical state were carried out by an X-ray photoelectron spectroscopy (XPS). The experimental results showed that the structure and phase composition of the CrN_xO_yC_z coatings depended on N₂ content. The evolution of the structure of CrN_xO_yC_z coatings was consistent with CrN_x-based coatings, and the CrN_xO_yC_z coatings contained Cr₂O₃, CrO₂, CrO, Cr₃C₂, CrN_x (Cr, CrN, Cr₂N), as well as different chromium oxynitride. However, the carbide and oxynitride were oxidized after annealing.     

Formation of α-Si1−xCx:H and nc-SiC films grown by HWCVD under different process pressure

In this work, hydrogenated amorphous silicon carbide (α-Si_1−xC_x:H) and nanocrystalline SiC (nc-SiC) thin films were deposited by hot wire CVD (HWCVD) using SiH₄/C₂H₂/H₂ gas mixtures. It was found that the films prepared under low gas pressure were α-Si_1−xC_x:H and those prepared under high gas pressure were nc-3C-SiC. The α-Si_1−xC_x:H films showed enhanced density of C-H_n and Si-C bonds with increasing C₂H₂ fraction, which induced an increase in optical gap from 1.8 to 3.0 eV. For the deposition process of nc-SiC, the E_g opt of the deposited films varied from 1.9 eV to 2.5 eV as the filament temperature increased from 1700 to 2100 °C. The deposition rate decreased rapidly from 5.74 nm/min to 0.8 nm/min with increasing T_F.     

Spectroscopy of X2Y4 (D2h) molecules: tensorial formalism adapted to the O(3)⊃D2h chain, Hamiltonian and transition moment operators

A tensorial formalism adapted to the case of the X₂Y₄ molecules with D_2h symmetry has been developed in the same way as in the previous works on XY₄ (T_d) and XY₆ (O_h) spherical tops and XY₅Z (C_4v) symmetric tops. Here, we use the O(3)⊃D_2h group chain. All the coupling coefficients and formulas for the computation of matrix elements are given for this chain and used in the case of the Hamiltonian and transition moment operators.     

Characterization of Iran electricity market indices with pay-as-bid payment mechanism

Market data analysis in Iran’s electricity market as a market with a pay-as-bid payment mechanism has been considered in this paper. The analysis procedure includes both predictability and correlation analysis of the most important load and price indices. The experimental data from Iran’s electricity market has been employed in its real size which is long enough to take properties such as non-stationarity of the market into account. For predictability, the characteristics of the hourly accepted Weighted Average Price (WAP) as the topmost price index of this market is analyzed. The analysis tools are time series analysis methods such as power spectral density analysis, phase space reconstruction and test of surrogates, the fractional dimension and the slope of integral sums and the recurrence plots. The results indicate a deterministic, un-stationary and seasonal behavior in addition to unstable periodic orbits and even chaotic behavior in WAP time series. These observations imply just short-term predictability of WAP behavior. The interactive behavior of WAP with the hourly required load (RL) is also considered. For this interaction analysis, in addition to the common correlation methods, cross and joint recurrence plot are also employed. The joint behavioral analysis represents an un-stationary mimic correlation between WAP and RL.     

Optical and physical properties of different composition of InxSe1−x thin films

Thin film binary alloys of In_xSe_1−x (0.05?x?0.30) have been prepared by the thermal evaporation technique. The optical transmission and reflection spectrum of these films were measured in the range 300-1100 nm. Both refractive index, n and extinction coefficient k have been determined from transmission and reflection measurements in terms of Murmann's equations. The dispersion of the refractive index is discussed in terms of the single-oscillator Wemple-DiDomenico model. The width of band tail is determined and the optical absorption edge is described using the ‘non-direct transition’ model proposed by Tauc. Finally, the relationship between the optical gap and chemical composition in In_xSe_1−x amorphous system is discussed in terms of the average heat of atomization H_s and average coordination number N_c. The results of these calculations can be used rationalize the observed optical properties of these materials. Finally, the chemical bond approach has been also applied to interpret the decrease of the glass optical gap with increasing In content.     

A study of TaxC1−x coatings deposited on biomedical 316L stainless steel by radio-frequency magnetron sputtering

In this paper, Ta_xC_1−x coatings were deposited on 316L stainless steel (316L SS) by radio-frequency (RF) magnetron sputtering at various substrate temperatures (T_s) in order to improve its corrosion resistance and hemocompatibility. XRD results indicated that T_s could significantly change the microstructure of Ta_xC_1−x coatings. When T_s was <150 °C, the Ta_xC_1−x coatings were in amorphous condition, whereas when T_s was ≥150 °C, TaC phase was formed, exhibiting in the form of particulates with the crystallite sizes of about 15-25 nm (T_s = 300 °C). Atomic force microscope (AFM) results showed that with the increase of T_s, the root-mean-square (RMS) values of the Ta_xC_1−x coatings decreased. The nano-indentation experiments indicated that the Ta_xC_1−x coating deposited at 300 °C had a higher hardness and modulus. The scratch test results demonstrated that Ta_xC_1−x coatings deposited above 150 °C exhibited good adhesion performance. Tribology tests results demonstrated that Ta_xC_1−x coatings exhibited excellent wear resistance. The results of potentiodynamic polarization showed that the corrosion resistance of the 316L SS was improved significantly because of the deposited Ta_xC_1−x coatings. The platelet adhesion test results indicated that the Ta_xC_1−x coatings deposited at T_s of 150 °C and 300 °C possessed better hemocompatibility than the coating deposited at T_s of 25 °C. Additionally, the hemocompatibility of the Ta_xC_1−x coating on the 316L SS was found to be influenced by its surface roughness, hydrophilicity and the surface energy.     

Study of insulating electrical conductivity in hydrogenated amorphous silicon-nickel alloys at very low temperature

On the insulating side of the metal-insulator transition (MIT), the study of the effect of low temperatures T on the electrical transport in amorphous silicon-nickel alloys a-Si_1−yNi_y:H exhibits that the electrical conductivity follows, at the beginning, the Efros-Shklovskii Variable Range Hopping regime (ES VRH) with T^−1/2. This behaviour showed that long range electron-electron interaction reduces the Density Of State of carriers (DOS) at the Fermi level and creates the Coulomb gap (CG). For T higher than a critical value of temperature T_C, we obtained the Mott Variable Range Hopping regime with T^−1/4, indicating that the DOS becomes almost constant in the vicinity of the Fermi level. The critical temperature T_C decreases with the content of nickel in the alloys.     

The bending triad of the quasi-spherical top molecule SO2F2 in the 550 cm region

The analysis of the ν₃/ν₇/ν₉ bending triad of SO₂F₂ has been recently performed with the Watson’s Hamiltonian up to octic terms employing 79 rovibrational parameters but including only the first order Coriolis interaction terms, fixed to ab initio values [H. Bürger, J. Demaison, F. Hegelund, L. Margulès, I. Merke, J. Mol. Struct. 612 (2002) 133-141]. Since SO₂F₂ is a quasi-spherical top, it can also be considered as derived from the sulfate ion. We have thus developed a new tensorial formalism in the O (3) ⊃ T_d ⊃ C_2v group chain [M. Rotger, V. Boudon, M. Loëte, J. Mol. Spectrosc. 216 (2002) 297-307]. This approach allows a systematic development of rovibrational interactions and makes global analyses easier to perform even for complex polyad systems. We present here an application of this model to the analysis of the bending triad, with the same set of microwave assignments and almost the same set of infrared assignments as in the previous study of Bürger et al. It appears that we need to expand our Hamiltonian to a lower degree than the “classical” one (six instead of eight) when including also the second order Coriolis interactions. Our fit does not include more parameters. Furthermore, all of them are determined and the standard deviation of the rotational transitions is twice smaller. The analysis has been performed thanks to the C_2v TDS program suite, which is freely available at the URL: http://www.u-bourgogne.fr/LPUB/c2vTDS.html.     

Effect of Mn on the magnetic properties of Fe3B/Nd2Fe14B nanocomposites

The magnetic properties of Nd_4.5Fe_77−xMn_xB_18.5 (x=0, 1 and 2) nanocomposites prepared by the crystallization of amorphous precursors were investigated. Addition of Mn is found to decrease the crystallization temperature of the amorphous ribbons. The intrinsic coercivity _iH_c and maximum energy product (BH)_max increase from 2.6 kOe and 9.1 MGOe for x=0 to 3.1 kOe and 10.3 MGOe for x=1, respectively, and the remanence ratio M_r/M_s increases from 0.70 to 0.72. The effect of Mn on Curie temperature T_C and the thermal stability of M_r and _iH_c were also studied. ⁵⁷Fe Mössbauer spectra have been recorded for x=0, 1 and 2 ribbons at room temperature and site preference of the Mn atoms in Fe₃B and Nd₂Fe₁₄B phases is discussed using the Mössbauer spectroscopy.     

High magnetostriction at low fields of (Tb1−xDyx)0.2Pr0.8(Fe0.4Co0.6)1.88C0.05 intermetallic compounds

The structure and magnetostriction of the (Tb_1−xDy_x)_0.2Pr_0.8(Fe_0.4Co_0.6)_1.88C_0.05 intermetallic compounds (0≤x≤1) were studied by X-ray diffraction and magnetic measurements. The formation of an approximate single Laves phase with a MgCu2-type cubic structure was observed in this series of compounds. It was found that the Curie temperature and the saturation magnetization of the compounds would decrease with increase in the Dy content up to x=1. The magnetostriction λ_a (λ_a=λ_‖-λ_⊥) gently rises when x≤0.6, and follows with a precipitous fall when x exceeds 0.6, with the highest value of λ_a being reached in the compounds with x=0.6. The magnetostriction of all the samples was observed to approach their own saturation in the magnetic fields higher than 4 kOe. This indicates that the addition of a small amount of Dy could effectively improve the low-field magnetostriction of the Tb_0.2Pr_0.8(Fe_0.4Co_0.6)_1.88C_0.05 compounds, which could become a kind of promising magnetostrictive material.     

Effect of substrate temperature on the morphology, structural and optical properties of Zn1−xCoxO thin films

Zn_1−xCo_xO thin films with c-axis preferred orientation were deposited on sapphire (0 0 0 1) by pulsed laser deposition (PLD) technique at different substrate temperatures in an oxygen-deficient ambient. The effect of substrate temperature on the microstructure, morphology and the optical properties of the Zn_1−xCo_xO thin films was studied by means of X-ray diffraction (XRD), atomic force microscopy (AFM), UV-visible-NIR spectrophotometer, fluorescence spectrophotometer. The results showed that the crystallization of the films was promoted as substrate temperature rose. The structure of the samples was not distorted by the Co incorporating into ZnO lattice. The surface roughness of all samples decreased as substrate temperature increased. The Co concentration in the film was higher than in the target. Emission peak near band edge emission of ZnO from the PL spectra of the all samples was quenched because the dopant complexes acted as non-radiative centers. While three emission bands located at 409 nm (3.03 eV), 496 nm (2.5 eV) and 513 nm (2.4 eV) were, respectively, observed from the PL spectra of the four samples. The three emission bands were in relation to Zn interstitials, Zn vacancies and the complex of V_O and Zn_i (V_OZn_i). The quantity of the Zn interstitials maintained invariable basically, while the quantity of the V_OZn_i slightly decreased as substrate temperature increased.     

Observation of the K2 4Δg state by cw perturbation-facilitated optical-optical double resonance spectroscopy

This paper reports for the first time both, an experimental observation and theoretical calculations of the K₂ 4³Δ_g state. For the experiment we used cw perturbation-facilitated optical-optical double resonance (PFOODR) spectroscopy. A single mode Ti-sapphire laser and a dye laser served as the pump and probe lasers, respectively. A total of 55 PFOODR signals have been assigned to the 4³Δ_g ← b³Π_u transitions. Absolute vibrational numbering was determined by using quantum defect analysis combined with comparing observed intensities with calculated Franck-Condon factors (FCF). For the former we used known parameters from the 2³Δ_g state since the 2³Δ_g and the 4³Δ_g states belong to the same Rydberg series. We report here our experimental and calculated spectroscopic constants, the corresponding RKR potential energy curve, the Franck-Condon table for the 4³Δ_g ↔ b³ Π_u system, as well as a comparison with the theoretical potential energy curve. The T_e value is found to be 28408.938(52) cm⁻¹.     

Promotion of surface SOx on the selective catalytic reduction of NO by hydrocarbons over Ag/Al2O3

The promotion of sulfur oxides on the selective catalytic reduction (SCR) of NO by hydrocarbons in the presence of a low concentration of sulfur oxides over Ag/Al₂O₃ has been investigated by a flow reaction test and in situ infrared spectroscopy. When the C₃H₆ (or C₁₀H₂₂) + NO + O₂ feed-flow reaction was tested, maximum NO reduction was below 30% over fresh Ag/Al₂O₃. After the addition of SO₂ to the feed flow, conversion increased slightly. Conversion increased further after SO₂ was cut-off from the feed flow. This demonstrated that the increase in NO reduction activity of the catalyst was related to SO_x adsorbed on the catalyst. SO_x adsorbed on the catalytic surface (1375 cm⁻¹) was detected by IR spectroscopy and was stable within the temperature range. NCO species, as an intermediate in NO reduction, on SO_x-adsorbed Ag/Al₂O₃ in a C₃H₆ + NO + O₂ feed flow was observed in in situ IR spectra during the elevation of the reaction temperature from 473 to 673 K, while it was only observed at 673 K on fresh Ag/Al₂O₃ under the same experimental conditions. We suggest that SO_x in low concentrations depressed the combustion of reductants by contaminating hydrocarbon combustion active sites on the catalyst, resulting in an increase in NO reduction efficiency of the reductants.     

Structure and magnetostriction of Tb0.2Pr0.8(Fe0.4Co0.6)1.93−xCx intermetallic compounds

The structure and magnetostriction of Tb_0.2Pr_0.8(Fe_0.4Co_0.6)_1.93−xC_x intermetallic compounds were studied by X-ray diffraction and magnetic measurements. Almost a single cubic Laves phase forms in the alloys for x ≤0.20, and a small amount of C can inhibit the formation of the 1:3 phase. The lattice parameter increases when 0≤x≤0.15, while the T_c and the spontaneous magnetization decreases with increasing x. The lattice parameter decreases slowly when 0.15≤x≤0.30, while the T_c decreases evidently with increasing x. The magnetostriction λ_a (=λ_∥-λ_⊥) is improved at low magnetic fields at room temperature for the compounds with 0.05≤x≤0.10, indicating that these C-containing compounds are promising magnetostrictive materials.     

Role of carbon in the formation of hard Ge1−xCx thin films by reactive magnetron sputtering

We have deposited germanium carbide (Ge_1−xC_x) films on Si(1 0 0) substrate via radio-frequency (RF) reactive magnetron sputtering in a CH₄/Ar mixture discharge, and explored the effects of carbon content (x) on the chemical bonding and hardness for the obtained films. We find that x significantly influences the chemical bonding, which leads to a pronounced change in the hardness of the film. To reveal the relationship between the chemical bonding and hardness, first-principles calculations have been carried out. It is shown that as x increases from 0 to 0.33, the fraction of sp³ C-Ge bonds in the film increases at the expense of Ge-Ge bonds, which promotes formation of a strong covalently bonded network, and thus enhances the hardness of the film. However, as x further increases from 0.33 to 0.59, the fraction of sp³ C-Ge bonds in the film gradually reduces, while that of sp³ C-H and graphite-like sp² C-C bonds increases, which damages the compact network structure, resulting in a sharp decrease in the hardness. This investigation suggests that the medium x (0.17<x<0.40) is most favorable to the preparation of hard Ge_1−xC_x films due to the formation of dominant sp³ C-Ge bonds.     

Experimental and kinetic modeling study of C2H4 oxidation at high pressure

A detailed chemical kinetic model for oxidation of C₂H₄ in the intermediate temperature range and high pressure has been developed and validated experimentally. New ab initio calculations and RRKM analysis of the important C₂H₃ + O₂ reaction was used to obtain rate coefficients over a wide range of conditions (0.003-100 bar, 200-3000 K). The results indicate that at 60 bar and medium temperatures vinyl peroxide, rather than CH₂O and HCO, is the dominant product. The experiments, involving C₂H₄/O₂ mixtures diluted in N₂, were carried out in a high pressure flow reactor at 600-900 K and 60 bar, varying the reaction stoichiometry from very lean to fuel-rich conditions. Model predictions are generally satisfactory. The governing reaction mechanisms are outlined based on calculations with the kinetic model. Under the investigated conditions the oxidation pathways for C₂H₄ are more complex than those prevailing at higher temperatures and lower pressures. The major differences are the importance of the hydroxyethyl (CH₂CH₂OH) and 2-hydroperoxyethyl (CH₂CH₂OOH) radicals, formed from addition of OH and HO₂ to C₂H₄, and vinyl peroxide, formed from C₂H₃ + O₂. Hydroxyethyl is oxidized through the peroxide HOCH₂CH₂OO (lean conditions) or through ethenol (low O₂ concentration), while 2-hydroperoxyethyl is converted through oxirane.     

Magnetic resonance T1ρ imaging of osteoarthritis: a rabbit ACL transection model

Objective

The objective of this study was to develop quantitative T_1ρ-weighted magnetic resonance imaging methodology for the detection and characterization of cartilage degeneration in a rabbit anterior cruciate ligament (ACL) transection model.

Methods

The right knee ACLs of 18 adult female New Zealand white rabbits were transected. The left knee joint served as a sham control. The rabbits were euthanized at 3 (Group 1), 6 (Group 2) and 12 (Group 3) weeks postoperatively. High-resolution 3D fat-saturated spoiled gradient echo images and T_1ρ-weighted images were obtained in both the sagittal and axial planes at 3 T using a quadrature wrist coil. Following MR analysis, histological slides from the lateral femoral condyle cartilage were graded using the Mankin grading system.

Results

For all three groups, the average overall T_1ρ values were significantly higher in the ACL-transected knee compared to control knee, and the percentage differences in T_1ρ values between ACL-transected and control increased with the duration of time after transection. The average Mankin score for ACL-transected knees was higher than that for control for each time point, but this difference was statistically significant only for all groups combined.

Conclusions

This study demonstrates the feasibility of using T_1ρ-weighted imaging as a useful tool in the detection and quantification of cartilage damage in all knee compartments in an ACL-transected rabbit model of cartilage degeneration.     

Dust acoustic wave oscillations in C60 molecule

In this letter, dispersion properties of low-frequency electrostatic waves in a C₆₀ molecule are investigated. It is assumed that C₆₀ molecule is charged due to the field emission, and hence the C₆₀ molecule can be regarded as charged dust spheres surrounded by degenerate electrons and ions. We obtain the dispersion relation for the low-frequency electrostatic oscillations in the C₆₀ molecule by using the quantum hydrodynamic model in conjunction with the Poisson equation.     

The effect of different temperature annealing on phase relation of LaFe11.5Si1.5 and the magnetocaloric effects of La0.8Ce0.2Fe11.5−xCoxSi1.5 alloys

The phase relation of LaFe_11.5Si_1.5 alloys annealed at different high-temperature from 1223 K (5 h) to 1673 K (0.5 h) has been studied. The powder X-ray diffraction (XRD) patterns show that large amount of 1:13 phase begins to form in the matrix alloy consisting of α-Fe and LaFeSi phases when the annealing temperature is 1423 K. In the temperature range from 1423  to 1523 K, α-Fe and LaFeSi phases rapidly decrease to form 1:13 phase, and LaFeSi phase is rarely observed in the XRD pattern of LaFe_11.5Si_1.5 alloy annealed at 1523 K. With annealing temperature increasing from 1573  to 1673 K, the LaFeSi phase is detected again in the LaFe_11.5Si_1.5 alloy, and there is La₅Si₃ phase when the annealing temperature reaches 1673 K. There almost is no change in the XRD patterns of LaFe_11.5Si_1.5 alloys annealed at 1523 K for 3-5 h. According to this result, the La_0.8Ce_0.2Fe_11.5−xCo_xSi_1.5 (0≤×≤0.7) alloys are annealed at 1523 K (3 h). The analysis of XRD patterns shows that La_0.8Ce_0.2Fe_11.5xCo_xSi_1.5 alloys consist of the NaZn₁₃-type main phase and α-Fe impurity phase. With the increase of Co content from x=0 to 0.7, the Curie temperature T_C increases from 180 to 266 K. Because the increase of Co content can weaken the itinerant electron metamagnetic transition, the order of the magnetic transition at T_C changes from first to second-order between x=0.3 and 0.5. Although the magnetic entropy change decreases from 34.9 to 6.8 J/kg K with increasing Co concentration at a low magnetic field of 0-2 T, the thermal and magnetic hysteresis loss reduces remarkably, which is very important for the magnetic refrigerant near room temperature.