A polycationic pillar[5]arene for the binding and removal of organic toxicants from aqueous media

ABSTRACT

The ability to bind and detect analytes with high levels of selectivity, sensitivity and broad applicability for a variety of analytes is an essential goal, with applications in public health and environmental remediation. Methods to achieve effective binding and detection include electrochemical, and spectroscopic methods. The use of supramolecular chemistry to accomplish such detection, by binding a target in a host and transducing that binding into a measurable signal, has advantages, including tunability of the sensor and the ability to rationally design hosts through an understanding of non-covalent interactions. Reported herein is the design and use of pillar[5]arenes to accomplish precisely such detection. Water-soluble pillar[5]arenes containing 10 cationic linker arms on their periphery bound toxicants in their hydrophobic cores with association constants of 10⁵–10⁶M^?1. With the use of cationic exchange resins, the pillar[5]arene hosts were removed from solution with their encapsulated guests, allowing for effective toxicant removal.     

Synthesis and anion recognition of neutral receptors based on multiamide calix[4]arene

Two multiamide calix[4]arenes (5, 6) were synthesized and characterized by NMR, MS and elemental analysis. The binding properties of receptors with some anions (π-O₂NPhOPO₃²⁻, π-O₂NPhO⁻, H₂PO₄⁻, Ac⁻, Cl⁻, Br⁻ and I⁻) were studied by UV-Vis spectra. The results indicate that the tetraamide calix[4]arenes (5, 6) have a good selectivity to the anions containing aromatic ring (π-O₂NPhOPO₃ ²⁻, π-O₂NPhO⁻). The 1 : 1 complexes between host and guest were formed through multiple hydrogen bonding and π-π interactions. The hosts 5 and 6 also show a definite binding ability for the anions (H₂PO₄⁻, Ac⁻, Cl⁻) that have no ultraviolet absorption, which provides a simple method of spectrum detection for these anions.     

Sensitive fluorescence probes for dihydrogen phosphonate anion based on calix[4]arene bearing naphthol-hydrazone groups

t-Butyl and t-pentylcalix[4]arenes bearing two 2-naphthol-1-hydrazone groups at the lower rim were synthesized,and showed excited-state intermolecular proton transfer fluorescent signal with basic anion.They are more sensitive to dihydrogen phosphate anion than to fluoride anion,although the latter has stronger basicity.Compared with t-butylcalix[4]arene bearing two 2-naphthol-1-hydrazone groups,t-pentylcalix[4]arenes derivative has a larger fluorescent difference between dihydrogen phosphate and fluoride a...     

杯芳烃衍生物的合成和性质的研究5

通过对特丁基杯(4)芳烃的酚羟基的选择性醚化制备了一系列一烃基,1,3-二烃基和四烃基醚,烃基分别含有缩醛、酰胺、氰基等活泼官能团。醚化反应的区域选择性主要取于使用的碱的种类和反应时间的长短。     

Calix[4]arene based neutral receptor for dihydrogen phosphate anion

A series of novel calix[4]arene hydrazone and semicarbazone based neutral receptors have been synthesized and characterized by IR, UV-vis, and NMR spectroscopies. The preliminary UV-vis and ¹H NMR titration experiments revealed that 25,26,27,28-tetrapropoxycalix[4]arene tetra-semicarbazone can recognize H₂PO₄⁻ through a 1:1 binding-stoichiometry in preference over other anions (Cl⁻, Br⁻, I⁻, HSO₄⁻, ClO₄⁻, and CH₃COO⁻).     

四乙氧羰基甲氧基杯[4]芳烃的合成与性质

配位作用;液膜传递;四乙氧羰基甲氧基杯[4]芳烃的合成与性质     

Preparation of two new [2]rotaxanes based on the pillar[5]arene/alkane recognition motif

Based on the pillar[5]arene/alkane recognition motif, two [2]rotaxanes were successfully prepared. Their formation was confirmed by NMR spectroscopy and ESI mass spectrometry. We also demonstrated that 3,5-dinitrophenyl group and 3,5-bis(trifluoromethyl)phenyl group are big enough to work as stoppers for DPPillar[5]arene, which lays a foundation for the preparation of more complex and functional supramolecular structures.     

A DFT study on a calix[5]crown-based heteroditopic receptor

The structures and binding energies of complexes formed between tris-ureido-calix[5]crown 1 and n- and 2-phenylethylammonium chloride have been determined by density functional calculations. Density functional theory analysis shows that the heteroditopic receptor 1 binds organic salt species with positive cooperativity.     

Solvent Extraction of Selenate and Chromate Using a Diaminocalix[4]arene

The extraction of Se(VI) and Cr(VI) using a diammoniumcalix[4]arene was investigated. A study of parameters such as ligand concentration, pH or diluent was carried out and allowed to specify the stoichiometry of the extracted species. It was shown that Se(VI) is extracted into CHCl₃ as (LH₂ ²⁺, Cl^-, HSeO₄ ^-) and ((LH₂ ²⁺)₂, 2Cl^-, SeO₄ ^2-)species at pH 2.6. An increase of pH or an addition of 5% or 10% decanol in CHCl₃ favors the extraction of SeO₄ ^2- over HSeO₄ ^- but leads to a drastic decrease of seleniumextraction. Cr(VI) was shown to be extracted as(LH₂ ²⁺, Cl^-, HCrO₄ ^-) at pH 2.6 and probably as (LH⁺, HCrO₄ ^-) for higher pH.     

Proton transfer-assisted host–guest complexation between a difunctional pillar[5]arene and amine-based guests

Proton transfer from a difunctional pillar[5]arene containing two carboxylic acid moieties to amine-based guests occurs in the host–guest complexation. The binding affinities are enhanced effectively due to the existence of electrostatic interactions.     

Synthesis and anion recognition of neutral receptors based on multiamide calyx[4]arene

~~Synthesis and anion recognition of neutral receptors based on multiamide calyx[4]arene~~     

A novel calix[4]arene fluorescent receptor for selective recognition of acetate anion

A novel bridged fluorescent calix[4]arene with 1,8-diaminoanthracene and glycine at the upper rim has been prepared, which exhibited selective recognition towards AcO⁻ over other anions such as F⁻, Cl⁻, Br⁻, , , I⁻ and by fluorescence spectroscopy and ¹H NMR method.     

Ratiometry of monomer/excimer emissions of dipyrenyl calix[4]arene in aqueous media

Variations in the ratio of monomer/excimer emissions from pyrenyl groups bound to a calix[4]arene through facing carboxamidomethyl substituents have been investigated in H₂O/CH₃CN mixtures. Above a level of 50% H₂O, monomer emission declines and the excimer emission concomitantly increases. DFT calculations support the argument that disruption of intramolecular NHO bonds by water results in a geometry, which favors contact of the pyrene units and thus a strong excimer emission. Addition of Fe(III) to a H₂O/CH₃CN (4:1, v/v) solution of 1 at pH 6.1 quenches both monomer and excimer emissions through electron transfer (eT) from excited pyrene to the metal ion.     

Liquid crystalline behavior and fluorescent property of calix[4]arene containing azobenzene photochromic group

The reaction of 4′-hydroxy-4-methyl azobenzene (1) and 1,6-dibromohexane afforded 6-bromo-1-((4-((4-met hylphenyl)azo)phenyl)oxy)hexane (2), which further reacted with p-tert-butylcalix[4]arene to give the calix[4]arene derivative (3) whose lower rim had been modified by the azobenzene photochromic group. The structure of 3 was characterized by ¹H-nuclear magnetic resonance (NMR) and electrospray ionization-mass spectrometry (ESI-MS). The fluorescence intensity of compound 3 was two to four times higher than that of compounds 1 and 2 as the azobenzene group concentration in the range of 1.6 × 10⁻⁵ to 8.0 × 10⁻⁴ mol/L, indicating that the fluorescence quantum yield of the azobenzene group had been improved through being attached to the calix[4]arene skeleton. The liquid crystalline behavior of compound 3 was studied by polarized microscopy (POM) and differential scan calorimeter (DSC). Compound 3 exhibited the enchased texture of a smectic liquid crystal from 209.4°C to 219.5°C on heating, while 2 exhibited a liquid crystalline phase from 87.4 to 83.2°C on cooling. It was found that the calix[4]arene skeleton was a good platform for conformation immobilization of azobenzene photochromic group and the formation of liquid crystalline. Translated from Chinese Journal of Applied Chemistry, 2006, 23(9): 1023–1026 [译自: 应用化学]     

Novel fluorescent cyanide-selective chemosensor based on a functionalised pillar[5]arene copper(II) complex

As a novel macrocyclic host, pillar[5]arene can selectively recognise guest molecules in organic solvents. In this study, a fluorescent chemosensor composed of a functionalised-pillar[5]arene and Cu²⁺ metal complex (PN–Cu), which shows good selectivity for CN^? anions, has been designed and synthesised. Complexation between PN–Cu and anions has been probed by means of various fluorescence-based methods. PN–Cu, as a turn-on fluorescence chemosensor showed high selectivity towards CN^? ions in comparison to other anions, and its detection limit for CN^? was calculated as 9.03 × 10^?7 M. The PN–Cu sensor can serve as a recyclable component in sensing materials. Moreover, the interaction between the singly functionalised pillar[5]arene and Cu²⁺ has been probed through various tests. Based on the remarkable selectivity of the chemosensor PN–Cu, we propose that it might be used as a potential material for CN^? recognition.     

Synthesis of a pillar[5]arene dimer by co-oligomerization and its complexation with n-octyltrimethyl ammonium hexafluorophosphate

A pillar[5]arene dimer was successfully prepared by co-oligomerization of 1,4-dimethoxybenzene and 1,6-bis(4-butoxyphenoxy)hexane. It was demonstrated that it forms 1:2 complexes with n-octyltrimethyl ammonium hexafluorophosphate both in chloroform and the gaseous state. A Scatchard plot indicated that the complexation between them is statistical with an average association constant of 6.0 (±0.4) × 10² M⁻¹ in chloroform.     

Syntheses of a pillar[4]arene[1]quinone and a difunctionalized pillar[5]arene by partial oxidation

A pillar[4]arene[1]quinone and a difunctionalized pillar[5]arene have been synthesized by partial oxidation.     

Organic clays. Synthesis and structure of Na5[calix[4] arene sulfonate] · 12 H2O,K5[calix[4]arene sulfonate]·8 H2O,Rb5[calix[4]arene sulfonate]·5 H2O,and Cs5[calix[4] arene sulfonate] ·4 H2O

The title calixarenes all exist in the solid state as bilayers of anionic calixarenes in the cone configuration. These layers alternate with inorganic regions which contain the cations and the water molecules. The overall structures bear a close resemblance to those found for clay minerals. The sodium salt crystallizes in the triclinic space groupP witha = 10.998(6),b = 13.582(5),c = 14.472(5) Å, = 74.01(3), = 89.09(4), = 86.50(4)°, andZ = 2 forD _calc = 1.72 g cm^–3. Refinement based on 4727 observed reflections led to a conventionalR = 0.050. The potassium salt crystallizes in the triclinic space groupP witha = 11.815(9),b = 13.636(6),c = 14.040(9) Å, = 100.24(5), = 111.86(9), = 95,14(9)°, andZ = 2 forD _calc = 1.77 g cm^–3. Refinement based on 2977 observed reflections led toR = 0.15. The rubidium and cesium salts are isostructural and crystallize in the monoclinic space groupP2₁/n with parameters for Rb[Cs]a = 11.603(5) [11.704(3)],b = 28.607(8) [29.747(9)],c = 12.512(5) [12.604(4)] Å, = 91.70(4) [91.63(2)°], andZ = 4 forD _calc = 2.01 [2.24] g cm^–3. Refinement based on 1750 [4257] observed reflections led toR = 0.108 [0.075]. Disorder of the cations was observed for the rubidium and cesium salts. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82074 (95 pages).     

Selective extraction of Fe3+ by a polymeric calix[4]arene

A polymeric compound containing more than one calixarene molecule was synthesized by reacting the oligomer ( 2 ) with 25,26,27-tribenzoyloxy-28-hydroxy calix[4]arene. After basic hydrolysis of 3a , the polymeric calixarene ( 3b ) was utilized for selective extraction of some metal cations from aqueous phase to organic phase. It was found that the compound ( 3b ) was selective toward Fe³⁺ from an aqueous solution containing Cu²⁺, Ni²⁺, Co²⁺ and Fe³⁺ cations. The mechanism of the extraction process was discussed. © 1994 John Wiley & Sons, Inc.     

Interactions of a water-soluble calix[4]arene with spermine: solution and solid-state characterisation

Abstract

The octaanionic 5,11,17,23-tetrasulfonato-25,26,27,28-tetrakis(hydroxycarbonylmethoxy)-calix[4]arene (cone conformation) (C₄TsTc) was investigated as a sensor for the biogenic tetracationic polyamine, spermine _.(H₄Spe⁴⁺). Fluorescence titration experiments of the water-soluble calixarene with spermine showed the formation of the 2:1 and 1:1 calixarene:spermine complexes in solution. The single crystal X-ray diffraction analysis of [(NaC₄TsTc)₄·(H₄Spe)₇] confirmed the formation of 2:1 and 1:1 calixarene:spermine species and showed that the water-soluble calixarene binds the spermine either by partially hosting it in the inner cavity or through the carboxylate groups on the lower rim. In order to investigate the effect of multivalent systems, supramolecular assemblies of octaanionic calixarene molecules templated by meso-tetrakis(4-N-methylpyridyl)porphyrin (H₂T₄) in different stoichiometric porphyrin:calixarene ratios (1:4 and 3:4) were also tested for spermine binding in solution. Fluorescence titration experiments with the 1:4 and 3:4 H₂T₄:C₄TsTc supramolecular complexes showed that the multivalent assemblies are more sensitive to the presence of spermine than the calixarene alone.