Photoirradiated Fe-Mediated AGET ATRP of Methyl Methacrylate in the Presence of Alcohol

In this study, photoirradiated Fe-mediated AGET (activators generated by electron transfer) atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was investigated at ambient temperature in N,N-dimethylformamide (DMF) using carbon tetrachloride as initiator, FeCl₃·6H₂O/bipyridine (Bpy) as catalyst complex, and alcohol as reducing agent. Linear semi-logarithmic plot of conversion vs. time was obtained from the kinetic experiments, and the number-average molecular weight increased linearly with monomer conversion and corresponded to the theoretic values with molecular weight distributions (M_w/M_n) as low as 1.25, which agreed with the character of controlled/living polymerization. The kinds of alcohol played an important role in photoirradiated Fe-mediated AGET ATRP of MMA. The living characteristics were demonstrated through chain extension experiment. The obtained polymer was characterized by proton nuclear magnetic resonance (NMR) and gel permeation chromatography.     

SET‐LRP of acrylonitrile catalyzed by tin powder

Sn(0)‐mediated single electron transfer‐living radical polymerization (SET‐LRP) of acrylonitrile (AN) with carbon tetrachloride (CCl₄) as initiator and hexamethylenetetramine (HMTA) as ligand in N, N‐dimethylformamide (DMF) was studied. The polymerization obeyed first order kinetic. The molecular weight of polyacrylonitrile (PAN) increased linearly with monomer conversion and PAN exhibited narrow molecular weight distributions. Increasing the content of Sn(0) resulted in an increase in the molecular weight and the molecular weight distribution. Effects of ligand and initiator were also investigated. The block copolymer PAN‐b‐polymethyl methacrylate with molecular weight at 126,130 and polydispersity at 1.36 was successfully obtained. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of well‐defined polyacrylonitrile by ICAR ATRP with low concentrations of catalyst

Acrylonitrile (AN) was polymerized by initiators for continuous activator regeneration (ICAR) atom transfer radical polymerization (ATRP). The effect of the ligand, tris(2‐pyridylmethyl)amine (TPMA) and N,N,N',N'‐tetrakis(2‐pyridylmethyl)ethylenediamine (TPEN), in the Cu‐based catalyst, the amount of catalyst, several alkyl halide initiators, targeted degree of polymerization, and amount of azobisisobutyronitrile (AIBN) added were studied. It was determined that the best conditions utilized 50 ppm of CuBr₂/TPMA as the catalyst and 2‐bromopropionitrile (BPN) as the initiator. This combination resulted in 46% conversion in 10 h and polyacrylonitrile (PAN) with the narrowest molecular weight distribution (M_w/M_n = 1.11–1.21). Excellent control was maintained after lowering the catalyst loading to 10 ppm, with 56% conversion in 10 h, experimental molecular weight closely matching the theoretical value, and low dispersity (M_w/M_n < 1.30). Catalyst loadings as low as 1 ppm still provided well‐controlled polymerizations of AN by ICAR ATRP, with 65% conversion in 10 h and PAN with relatively low dispersity (M_w/M_n = 1.41). High chain end functionality (CEF) was confirmed via ¹H NMR analysis, for short PAN chains, and via clean chain extensions with n‐butyl acrylate (BA). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1961–1968     

AGET ATRP of acrylonitrile using 1,1,4,7,10,10‐hexamethyltriethylenetetramine as both ligand and reducing agent

Atom transfer radical polymerization using activators generated by electron transfer (AGET ATRP) of acrylonitrile (AN) initiated by ethyl 2‐bromoisobutyrate was approached for the first time using 1,1,4,7,10,10‐hexamethyltriethylenetetramine (HMTETA) and 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as both ligand and reducing agent. AGET ATRP of AN with HMTETA as both ligand and reducing agent was better controlled than with PMDETA as both ligand and reducing agent under the same experimental conditions. With an increase content of HMTETA, the polymerization provided an accelerated reaction rate and a broader polymer molecular weight distribution. The rate of polymerization with DMF as solvent was faster than with acetonitrile, cyclohexanone, toluene, and xylene as solvents. The polymerization apparent activation energy was calculated to be 45.7 kJ mol^?1. The end functionality of polyacrylonitrile (PAN) was confirmed by ¹H NMR spectroscopy. The living feature of PAN was verified by chain extensions of PAN with methyl methacrylate and AN. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 128–133, 2010     

Photo-induced metal-free ATRP of MMA with 2,7-bi-(N-penothiazinyl)fluorenone as photocatalyst

In this study, 2,7-bi-(N-penothiazinyl)fluorenone was employed as photocatalyst (PC), ethyl α-bromophenylacetate (EBP) as atom transfer radical polymerization (ATRP) initiator, and photo-induced metal-free ATRP of methyl methacrylate (MMA) was performed at 25°C under blue light irradiation. PMMAs with well-defined architectures and precisely controlled chain lengths were synthsized. The kinetics results confirmed that molecular weights increased linearly with monomer consumption. The molecular weight distributions (M_w/M_n) of the resultant PMMA were narrow. The polymerization was activated and deactivated by periodic light control process. ¹H nuclear magnetic resonance spectrometer (NMR) and gel permeation chromatography (GPC) were used to characterize the obtained PMMAs. The living characters of the polymerization system were further confirmed by chain extension of from the PMMA-Br macroinitiator.     

Evidence for chain transfer in the atom transfer radical polymerization of butyl acrylate

Poly(butyl acrylate) (PBuA) of high molecular weight was synthesized by atom transfer radical polymerization (ATRP) in ethyl acetate. Whereas for low molecular weight polymers, a linear increase of the number‐average molecular weight, M_n, versus conversion and narrow molecular weight distributions indicate the suppression of side reactions, a downward curvature in the plot of M_n versus conversion was observed for high molecular weights (M_n > 50 000). This effect is explained by chain transfer reactions, leading to branched polymers. GPC measurements with a viscosity detector give evidence for the branched structure of high molecular weight polymers obtained in ATRP. In addition, transfer to solvent or monomer is likely to occur.     

Synthesis of high molecular weight and narrow molecular weight distribution poly(acrylonitrile) via RAFT polymerization

Well‐defined polyacrylonitrile (PAN) of high viscosity‐average molecular weight (M_η = 405,100 g/mol) was successfully synthesized using reversible addition‐fragmentation chain transfer polymerization. The polymerization exhibits controlled characters: molecular weights of the resultant PANs increasing approximately linearly with monomer conversion and keeping narrow molecular weight distributions. The addition of 0.01 equiv (relative to monomer acrylonitrile) of Lewis acid AlCl₃ in the polymerization system afforded the obtained PAN with an improved isotacticity (by 8%). In addition, the influence of molecular weights and molecular weight distributions of PANs on the morphology of the electrospun fibers was investigated. The results showed that, under the same conditions of electrospinning, average diameter (247–1094 nm) of fibers increased with molecular weights of PANs, and it was much easier to get “uniform” diameter fibers while using PANs with narrow molecular weight distributions as the precursor of electrospinning. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

From “Living” Carbocationic to “Living” Radical Polymerization

Abstract

“Living” carbocationic polymerization is compared to the “living” radical process. Similarities and differences are discussed. “Living” radical polymerization of vinyl acetate and methyl methacrylate to provide polymers with controlled molecular weights and narrow molecular weight distribution (M_w/M_n < 1.2) are presented.     

First example of an unsymmetrical difunctional monomer polymerizable by two living/controlled methods

In this paper the synthesis and (co)polymerizations of 4‐(acryloyloxy)‐ε‐caprolactone are reported. This new monomer can be polymerized in a living/controlled way by two different polymerization mechanisms; atom transfer radical polymerization (ATRP) and ring‐opening polymerization (ROP). ATRP, which was carried out at 90°C using NiBr₂(PPh₃)₂, leads to new polyacrylates containing pendant caprolactone functionalities with controlled molecular weights and narrow polydispersities (M_w/M_n ˜1.1). Alternatively, ROP of this functional ε‐caprolactone bearing a pendant acrylate functionality leads to new poly(4‐(acryloyloxy) caprolactone) as well as random copolymers when ε‐caprolactone and L,L‐lactide are added as comonomers. The (co)polymerizations were carried out using either Al(OⁱPr)₃ in toluene at 25°C or Sn(Oct)₂ as a catalyst at 110°C producing (co)polymers with controlled molecular weights and narrow polydispersities (M_w/M_n ˜ 1.2). As a potential application, the introduction of acrylate pendant groups into the polyesters facilitated the preparation of cross‐linked biodegradable materials either thermally or by irradiation with ultraviolet light radical curing.     

Synthesis of polyallene‐based graft copolymer via 6‐methyl‐1,2‐heptadien‐4‐ol and styrene

A series of well‐defined graft copolymers with a polyallene‐based backbone and polystyrene side chains were synthesized by the combination of living coordination polymerization of 6‐methyl‐1,2‐heptadien‐4‐ol and atom transfer radical polymerization (ATRP) of styrene. Poly(alcohol) with polyallene repeating units were prepared via 6‐methyl‐1,2‐heptadien‐4‐ol by living coordination polymerization initiated by [(η³‐allyl)NiOCOCF₃]₂ firstly, followed by transforming the pendant hydroxyl groups into halogen‐containing ATRP initiation groups. Grafting‐from route was employed in the following step for the synthesis of the well‐defined graft copolymer: polystyrene was grafted to the backbone via ATRP of styrene. The cleaved polystyrene side chains show a narrow molecular weight distribution (M_w/M_n = 1.06). This kind of graft copolymer is the first example of graft copolymer via allene derivative and styrenic monomer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5509–5517, 2007     

Atom transfer radical polymerization using activators regenerated by electron transfer of acrylonitrile in 1‐(1‐ethoxycarbonylethyl)‐3‐methylimidazolium hexafluorophospate

Atom transfer radical polymerization using activators regenerated by electron transfer (ARGET ATRP) of acrylonitrile (AN) was first approached with 1‐(1‐ethoxycarbonylethyl)‐3‐methylimidazolium tetrafluoroborate ([ecemim][BF₄]) as reaction medium and tin(II) bis(2‐ethylhexanoate) (Sn(EH)₂) as reducing agent in the presence of air. When compared with in bulk, an obvious increase of polymer isotacticity was observed for ARGET ATRP of AN in 1‐(1‐ethoxycarbonylethyl)‐3‐methylimidazolium hexafluorophospate ([ecemim][PF₆]), the reaction rate of ARGET ATRP of AN in [ecemim][PF₆] was higher and the polymerization process was better controlled. The block copolymer polyacrylonitrile‐block‐poly(methyl methacrylate) with molecular weight at 69,750, distribution at 1.34, and isotacticity at 0.36 was successfully obtained in [ecemim][PF₆]. [Ecemim][PF₆] and the catalyst system were recycled and reused and had no effect on the living nature of polymerization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

POLYMERIZATION OF ACRYLONITRILE WITH ORGANOLANTHANIDES AS SINGLE-COMPONENT CATALYSTS

 Ind₂Y(μ-Et)₂AlEt₂ and Ind₂LnN(i-Pr)₂ (Ln = Y, Yb) were used as a single-component catalyst for the polymerization of acrylonitrile (AN) respectively. The regularity of polymerization of AN and stereoregularity of polyacrylonitrile (PAN) were also studied in both cases. Both catalysts can produce PAN with molecular weight from I0,000to 30,000. In addition, the catalytic activity and molecular weights were increased by the addition of PhONa.     

Basic ionic liquid/FeCl3·6H2O as an efficient catalyst for AGET ATRP of methyl methacrylate

A basic ionic liquid, 1‐butyl‐3‐methyl imidazolium hydroxide ([Bmim]OH), was synthesized and used as the additives in an iron‐mediated atom transfer radical polymerization with activators generated by electron transfer (AGET ATRP) of methyl methacrylate in bulk and solution, using FeCl₃ · 6H₂O as the catalyst, ethyl 2‐bromoisobutyrate as the initiator, vitamin C (Vc) as the reducing agent, and tetrabutylammonium bromide or tetra‐n‐butylphosphonium bromide as the ligand. Catalytic amount of [Bmim]OH could enhance the polymerization rate and produce poly(methyl methacrylate) with controllable molecular weights and narrow molecular weight distributions (M_w/M_n = 1.3–1.4). The nature of controlled/“living” free radical polymerization in the presence of basic ionic liquid was further confirmed by chain‐extension experiments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

New ligands for atom‐transfer radical polymerization

A new type of ligands based on organic acids, such as acetic acid, iminodiacetic acid, succinic acid and isophthalic acid, has been successfully employed in the iron‐mediated atom‐transfer radical polymerization (ATRP) of vinyl monomers, such as styrene (St) and methyl methacrylate (MMA). The systems containing different organic acids can react at 250°C to 1300°C in “living”/controlled radical polymerizations giving polymers with relatively narrow molecular weight distributions (M_w/M_n = 1.2–1.5). ¹H NMR spectroscopy has been used to study the structure of the resulting polymers. Block copolymers were synthesized to confirm the ìlivingî nature of the system. The measured molecular weights are close to the calculated values for the polymerization of MMA and are somewhat lower than the theoretical ones for styrene.     

ARGET ATRP of acrylonitrile with ionic liquid as reaction media and 1,1,4,7,7‐pentamethyldiethylenetriamine as both ligand and reducing agent in the presence of air

[C₁₂mim][BF₄], [C₈mim][BF₄], and [C₄mim][BF₄] were first applied as reaction media for atom transfer radical polymerization using activators regenerated by electron transfer (ARGET ATRP) of acrylonitrile (AN) with 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as both ligand and reducing agent in the presence of air. The rate of polymerization in [C₁₂mim][BF₄] was considerably faster than in [C₈mim][BF₄] and [C₄mim][BF₄]. ARGET ATRP of AN in [C₁₂mim][BF₄] were better controlled than in [C₈mim][BF₄] and [C₄mim][BF₄] under the same experimental conditions. With an increase in the content of PMDETA, the polymerization provided an accelerated reaction rate and a broader polymer molecular weight distribution. A slow polymerization rate and a broad polydispersity index were observed using TMEDA instead of PMDETA as both ligand and reducing agent. There was an obvious induction period with CuCl₂ instead of CuBr₂ as catalyst. Well‐defined PAN‐b‐PMMA with higher molecular weight at 104,560 and relatively broader distribution at 1.35 was successfully prepared with PAN as macroinitiator via ARGET ATRP in [C₁₂mim][BF₄] in the presence of air. The resultant fibers were obtained with the fineness at 1.17dtex and the tenacity at 6.03cN · dtex^?1. Copyright © 2010 John Wiley & Sons, Ltd.     

ATRP of MMA under 60Co γ‐irradiation at room temperature

In this work, atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was successfully carried out at room temperature (25 °C) under ⁶⁰Co γ‐irradiation environment. The polymerization proceeded smoothly with high conversion (>90%) within 7 h. The polymerizations kept the features of controlled radical polymerization: first‐order kinetics, well‐predetermined number‐average molecular weights (M_n,GPC), and narrow molecular weight distributions (M_w/M_n < 1.25). ¹H NMR spectroscope and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry confirmed that poly(methyl methacrylate) (PMMA) chain was end‐capped by the initiator moieties. The Cu(II) concentration could reduce to 20 ppm level while keeping good control over molecular weights. This is the first successful example for the ATRP of MMA under ⁶⁰Co γ‐irradiation at room temperature. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

2‐[(Diphenylphosphino)methyl]pyridine as ligand for iron‐based atom transfer radical polymerization

2‐[(Diphenylphosphino)methyl]pyridine (DPPMP) was successfully used as a bidentate ligand in the iron‐mediated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) with various initiators and solvents. The effect of the catalytic system on ATRP was studied systematically. Most of the polymerizations with DPPMP ligand were well controlled with a linear increase in the number‐average molecular weights (M_n) versus conversion and relatively low molecular weight distributions (M_w/M_n = 1.10–1.3) being observed throughout the reactions, and the measured molecular weights matched the predicted values. Initially added iron(III) bromide improved the controllability of the polymerization reactions in terms of molecular weight control. The ratio of ligand to metal influenced the controllability of ATRP system, and the optimum ratio was found to be 2:1. It was shown that ATRP of MMA with FeX₂/DPPMP catalytic system (X = Cl, Br) initiated by 2‐bromopropionitrile (BPN) was controlled more effectively in toluene than in polar solvents. The rate of polymerization increased with increasing the polymerization temperature and the apparent activation energy was calculated to be 56.7 KJ mol^?1. In addition, reverse ATRP of MMA was able to be successfully carried out using AIBN in toluene at 80 °C. Polymerization of styrene (St) was found to be controlled well by using the PEBr/FeBr₂/DPPMP system in DMF at 110 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2922–2935, 2008     

Study on the polymerizations of methyl methacrylate and styrene initiated with chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine

Methyl methacrylate (MMA) and styrene (St) have been radically polymerized in the presence of chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine (Me₃SiCl/CuCl/PMDETA). An analysis of the resultant polymers by ¹H NMR discloses terminal silyl group and chlorine atom in all the obtained polymers. Kinetics studies have been carried out by measuring monomer conversions and polymer molecular weights against polymerization time. The results indicate that, for both MMA and St polymerizations, the monomer conversions exhibit a quasi-linear relationship with polymerization time, and the polymer number-average molecular weight (M_n) also increases with monomer conversion. The molecular weights of both PS and PMMA exceed one hundred thousand. Regardless of molecular weight, all the polymers show narrow molecular distributions (M_w/M_n = 1.2-1.5). These polymerization reactions are speculated to follow a mechanism similar to that of atom transfer radical polymerization (ATRP).     

Synthesis of linear and starlike polymers from poly(propylene glycol) methacrylate using controlled radical polymerization

The copper‐catalyzed atom transfer radical polymerization (ATRP) of poly(propylene glycol) methacrylate (PPGM) in solution to produce linear and starlike polymers is reported, using methylethyl ketone as the solvent and a temperature of 80 °C. The ATRP system used was efficient for polymerization of the functionalized monomer without protecting hydroxyl end groups of monomer. The polymerizations were consistent with “living” or controlled processes, as revealed by the linear evolution of molecular weight with conversion. Increasing the [M]₀:[I]₀ ratio resulted in increasing molecular weights, whereas the polydispersity indices remained low (M_w/M_n < 1.4) even at high conversion. Decreasing the [CuBr]₀:[I]₀ ratio resulted in lower conversions, slightly larger polydispersities, and decreased molecular weights, likely resulting from a lower initiation efficiency. Polymers were characterized by ¹H and ¹³C NMR; molecular weights of polymers with low degrees of polymerization were estimated by end‐group analysis from ¹³C NMR spectra obtained using distortionless enhancement by polarization transfer and the gated decoupling techniques. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 334–343, 2002     

Grafting by in situ coupling of epoxy groups of a living copolymer with an anionic living polymer

A tetrahydrofuran (THF) solution of the living random copolymer of methyl methacrylate (MMA) and glycidyl methacrylate (GMA) was prepared by the living anionic copolymerization of the two monomers, using 1,1‐diphenylhexyllithium (DPHLi) as initiator, in the presence of LiCl ([LiCl]/[DPHLi]₀ = 3), at −50°C. The copolymer thus obtained has a controlled composition and molecular weight and a narrow molecular weight distribution. By introduction of an anionic living polystyrene (poly(St)) or anionic living polyisoprene (poly(Is)) solution into the above system at −30°C, a coupling reaction took place and a graft copolymer with a polar backbone and nonpolar side chains was produced. The solvent used in the preparation of the living poly(St) or poly(Is) affects the coupling reaction. When benzene was the solvent, a graft copolymer of high purity, controlled graft number and molecular weight, and narrow molecular weight distribution (M_w/M_n = 1.11–1.21) was obtained. In the coupling reaction, the living poly(St) reacted only with the epoxy groups and not with the carbonyls of the backbone polymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 105–112, 1999